If you're looking for a reliable inverter, this would be a satisfying type. For pure sine wave inverters, pls check www.ato.com/pure-sine-wave-inverters For modified sine wave inverter, pls check www.ato.com/modified-sine-wave-inverters

@TheWickerShireProject

Жыл бұрын

would it be acceptable to use auto reset fuses of the same dc amps?

Usually fuses dont blow for no reason though 😅

Can I step up to 1 size bigger fuse ? It’s a 3,000W 48v inverter it worked for a hour then shut off & will not work and the distributor does not answer my questions !

I have this WIICES Change Machine inverter but after using with a 100W fan, it has not been working well again. The overload light keeps blinking on and off and its not working again. What can i do please?

Thank you good video

thanku

Do you have catalogue and pricelist for your pure sine wave inverters 3kw to 10 kw for solar set up

@ATOcom

Жыл бұрын

You can log in to our professional inverter website: www.inverter.com/ You can check the pure sine wave catalog: www.inverter.com/sine-wave-inverter Also check out the off-grid inverter catalog: www.inverter.com/off-grid-inverter They may be able to meet your requirements, you can contact our pre-sales team according to the page.

I have 3000w pure sine inverter and im searching fuses. What the best fuse for 3000w inverter. And what is bamenof that fuses?

Where can I buy fuses can y help me?

I have a 1500W inverter (Excelvan brand) Mine has output but if I plug in anything above that uses 600 watts it shuts itself down and the fault like comes on. No blown fuses or anything, If I cycle it off/on its good to go, until I try to plug something in that uses a lot of watts (i.e. like a small a 600 watt heater) Anyone have any idea what is going on? I used to be able to run things like a table saw or a small AC unit off of this thing before!

@FromMetayou

6 ай бұрын

Blown capicitor

@1realtruthrightnow742

6 ай бұрын

@@FromMetayou thank you!

I have a motomaster 3000 watt inverter that has power but not power to plugs. I opened it up and it has about 20 25 amp blade fuses but I can't pull them out. They seem to be soldered in. Is this normal? How can I check them?

@R0ckerb0y

19 күн бұрын

For soldered on fuses you will need a soldering iron and a steel braided wick or some other mechanism to remove the solder and replace the fuse. When I have had to do this I solder on a fuse holder so my fuses can just be removed by hand in the future.

Noo need to check just look its transparent

I'm impressed by the quality of this content. I’ve read a book on this topic that changed my outlook on life. "A Life Unplugged: Reclaiming Reality in a Digital Age" by Theodore Blaze

Who really has that device? I did get offered one on my free Amazon products sometime ago but never knew what to do with it

How to get the fuse out ! I tried with some needle nose pliers

@ATOcom

Жыл бұрын

Just pull it out. It'd be easy

@jimmybrad156

Жыл бұрын

it might be soldered in. If it's blown, use a soldering iron and solder sucker and/or copper braid to remove it.

Not true. Most time mosfets burn

@shaunbensemann2652

11 ай бұрын

Correct from what I've seen. But why do the mosfets always fail?

@sooshixlion9594

2 ай бұрын

​@@shaunbensemann2652 Random things, corente, frequency, enviroment etc.

ভাই উল্টো লাইন দেওয়ার কারণে ব্যাটারিতে এখন আর চলে না করনীয় কি

FUSES BLEW ON MY KNUP 4000W INVERTER, THEY WERE SOLDERED INSIDE, WHAT A STUPID DESIGN

@Alpha-ms9nj

8 ай бұрын

My 2000W Krieger unit failed to fire up. I hope it's something simple like a fuse and they aren't soldered in.

I have a Krieger 2000W PSW inverter for a solar power back up with 300W of panels and 2 100AH Redodo batteries. I have never used it to power ANYTHING and hardly ever turn it on because we have had no power outage emergencies. I only occasionally turn it on to charge power tool flashlight and some 18650 batteries. The inverter is only 13 months old and won't turn on. It blinked once and died smh. I will inquire about a fuse and or warranty from Krieger but man, this is terrible reliability for a Krieger brand. I will keep your company in mind in case I have to switch.