Bueeens profe mesing, sigue apoyándonos con tus grandes lecciones, desde Perú 😊😊

Saya suka teknik nya🤩👍

좋은 영상 감사합니다. 응원합니다!😊😊😊😊😊

Using a digital spirit level is an interesting idea. I think a 1:8 reduction gearbox, which larger lathes are usually equipped with, could be conveniently used here. This gear is usually designed so that the gear has a number of teeth divisible by 3 and 4, just so it can be used as a simple dividing device. You simply switch the lever from the intermediate position to the 1:8 position and roughly rotate the chuck by hand. With 1:8 gearing, the motor won't usually turn that easily, and for this purpose it might be enough.

Stupenda idea!!!👍 a me spesso occorre montare un mandrino uguale al tuo...Bravo!!!

Vamos arriba hermano Messin excelente, un Abrazo para ti y todos los hermanos Indoneses ❤❤

Hi Yanto. Best regards from a german saturday afternoon. 🙋‍♂️🇩🇪

@Yantoo

Ай бұрын

Hy to brother Frank.. in Indonesia Saturday afternoon to 😁♥️

Очень красивая работа, когда все получается!

Brilliant Hard working 👍👌

The title doesn't describe the project. It appears to be a chuck back plate. If that's a bearing that I saw you install on the press I'm guessing this chuck is going on the tail-stock? Wakodahatchee Chris

We probably don't have the same notion of precision work on a lathe

Arc welding a part on a lathe, may be a technique that you would not do tomorrow in the same shop.

Cool work thanks 👍

Szép munka mester

good job 👍👍

Amazing ❤

I'm sure you're lathe is not happy about all the welding spatter in/around the chuck and on the ways.

@laszloiszlai

5 күн бұрын

Can an anti-spatter spray be used?

@buyamerican3191

4 күн бұрын

@@laszloiszlai yes, please do.

Смотрю тебя, и сам хочу быть токарем. Очень интересная работа

@fainderskurs-koi8767

Ай бұрын

Купи станок и точи на здоровье.

@SAURON-rg1el

Ай бұрын

@@fainderskurs-koi8767 уже едет станок

@user-pr6tj1wq2d

2 күн бұрын

В трехкулачковом патроне было-бы удобнее.

Absolutely brilliant work ❤️❤️💚💚👍👍🇬🇧🇬🇧

@buyamerican3191

26 күн бұрын

Brilliant???

Aguardando o próximo episódio

Жёсткий тип,сварка в шлепанцах,да он посуровее челябинских мужиков будет)

Лайк. Молодцы. Отлично!👍👍👍

Sangat presisi sekali

02:25 La masa debe estar lo más próxima a la pieza a soldar SIN QUE MEDIEN ELEMENTOS MECÁNICOS MÓVILES... en este caso, conviene morder la masa en la pieza de mayor diámetro. Saludos!

Teknik yg sulit untuk ditiru 🤍👍

Grande monstruo te pasaste

👍

Bom dia! Muito bom.

Cutting Oil? What's cutting oil?

@PA-Tammy

Ай бұрын

PPE LOL

👍👍👍

What is the incisor in the video? что за резец на видео ?

Молодец супер 👍

❤

This is going to make me wonder what your making for a week. 🤣

@gorak9000

Ай бұрын

considering it has a chuck and a bearing in it, probably a rotary weld positioner or something. Either that or "high precision chuck backplates" that are on amazon or ebay

@ddoherty5956

Ай бұрын

@@gorak9000 next vid shows it's a combination chuck and live center.

Halo bang, saya baru kelas 11 smk, jurusan mesin Saya salut dengan cara kerja abang, sangat baguss Numpang tanya bang, mini digital level kegunaannya apa ya?

@sugionosmp2437

21 күн бұрын

Maksud saya, cara penghitungannya bagaimana?

Manda um divisor desse pra mim

Buraco matou a técnica sim furos

👏🏿👏🏿👏🏿😃👍🏿

@Yantoo

Ай бұрын

😁🙏♥️

Used to do that sort of thing in a 3 jaw chuck lot less faffing about.

Niw spawa się w uchwycie tokarki a jak już to robisz to zakryj uchwyt od oprysku stopionego metalu. Jak widzę to pracujesz jakby to była cudza maszyna i robota.

There's far easier ways of doing this.

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

Hey mr big game 😆.

А как вам удаётся так быстро центровать деталь на четырёх кулачковом патроне?

@Vik_ru

Ай бұрын

Да так, стук бряк и готово!

@michaeldiy1510

21 күн бұрын

практика. чем больше тем быстрее

Als ge met platte messen werkt zegt al genoeg.

Pamiętaj aby nie puszczać wiórów wstęgowych bo może ci poobcinać palce, rękę lub nawet i kark. Dobry tokarz wie jak pracować aby nie tworzyły mu sie splątane wstążki na nożu bo czasem pęknie Ci nóż.

how do you centre things with four independendt teeth ?

@robertlawson8572

14 күн бұрын

Jaws, not teeth! Centring a workpiece in a four jaw is a 90 second operation after the first one of a batch, and... a four jaw holds tighter than a three jaw... I've roughed 1.5" off a diameter of a steel billet using a HSS knife and face tool, at low speed, requiring high torque, which I doubt the machine's three jaw could have transmitted... 7.5HP machine... Anyway, centring in a four jaw... The chuck face has reference grooves in it. They're cleverly arranged so you can compare the independent jaws "corners" to the grooves, interpolate the position of the jaws between grooves. So, you adjust the jaws 1,3, and 2,4 so the workpiece centres roughly, but reasonably well, by eye, then...Either use a DTI to check the workpiece centres on axes 1,3, and 2,4, or... spin the chuck reasonably slowly, and, holding a piece of chalk (blackboard or French) in your hand, approach the workpiece with the chalk, until it touches the periphery of the workpiece. It'll leave a witness mark in one spot if the workpiece is running out a great distance, and you do it right... (with bright stock, you have no excuse for being far out...) Anyway, if the mark's at jaw one, relax the tightening screw at jaw three, add pressure at jaw 1, retighten jaw one, repeat the chalk thing. if you're lucky, the chalk mark will be at both jaw 1 and 3, or if not, there'll be a wider mark on jaw 1 side... Then deal with 2, 4 Continue until approaching the billet with chalk, the periphery is marked continuously... If you're turning cast stock, it may not be round, nor will "black bar" then, it's down to experience and judgement... Once you've centred your first component, when you unload it, loosen jaws 1 and 2, remove finished component, mount next, tighten 1 and 2, you'll not be far out, check, adjust, turn. 90 seconds for a component you can mount by hand. Big stuff, handled by hoist or crane... A but longer... I was taught not to hold black bar in a three jaw chuck, and never did... But... Not everyone was taught that... In my last job, I ground my three jaw's chuck jaws in situ far more often than I had previously in my entire working life... "Use the four jaw for turning black bar, you arse!" didn't have the desired effect with fitters... You can regrind four jaw independent chuck jaws more easily than those from a three jaw self centring chuck... (or a four or six jaw self centring chuck) I used to leave a four jaw mounted on my "best" lathe at the end of the day, to deter fitters from using it overnight. They thought they could turn... Most, if not all, were wrong...

@snorttroll4379

14 күн бұрын

so with the four tooth ones, you do not have the swirly synchronisation plate on the back? you just individually adjust?@@robertlawson8572

Voce esta atrezado

lathe abuse

חתיכת עולם שלישי. עובד יחף עם ברנר, 😮

Máy điện tử tên gọi là gì a

ediet work 😢

Сынок тебе станок не жалко .после сварки в станке ты выбросил все подшипники в переднеи бабке .очень скоро .

@franciscoguerrero7451

Ай бұрын

Es lo ke le dije yo pero no entiende ke se dañan los rodamientos o baleros

@user-jh4un6sj5e

Ай бұрын

А еще этот умелец не умеет затачивать резцы, стружка должна закручиваться, а она лентой сползает.

Воистину купликан!

Creative video, thanks :)

Да геморой это а не метод , не точный не позволяет сделать муфту без люфта . Отверстия для фланца или такого рода соединения . Если нужно точно ставьте энкодер на 3600 имп на оборот .

То ми маємо дивитись поки ти то звариш ???

@Yantoo

27 күн бұрын

😁🙏🙏

Свистун

Was soll daran so besonders sein?

@zebulon6029

20 күн бұрын

Nun, es ging schnell den Winkel zu finden. Hat aber nichts mit Drehtechnik zu tun, allenfalls Messtechnik. Mit einem Zirkel hätte man das ähnlich schnell finden können.

Nice craftman skills but, all of them are a piece of shit. Use a cnc 😂

@phillhuddleston9445

Ай бұрын

You don't need a cnc to do good work but a manual mill would have made a much better part.