A Full Size ATX Gaming PC Anyone Can 3D Print

Ғылым және технология

SUG-HUN: Does your 3D printer only print 180cm x 180cm x180cm? If so, you can 3D print your own powerful 26L ATX gaming PC Case using my files: www.printables.com/model/866926/
Get an insider view or vote on future projects here:
/ stand_up_g4m3r
PSU Cable Lengths:
24pin - 190mm
CPU - 360mm
PCIE - 230mm
The design is inspired from: www.printables.com/model/1525...
Thanks for watching!
Equipment and Tools (Affiliate Links):
Qidi Tech X-Max 3 - amzn.to/47ARpKC
PETG-CF Midnight Blue- amzn.to/3y4Nby8
AM4 ATX Motherboard - amzn.to/3JMOnsE
AMD Ryzen 7 5800X3D - amzn.to/3NUIT1w
32GB DDR4 - amzn.to/3NULZm1
EVGA PSU - amzn.to/3vqyBjn
GPU - amzn.to/3RQrxUq
Riser Cable - amzn.to/4alhxdn
Portable Monitor - amzn.to/48qXw4m
Logitech Wireless Mouse - amzn.to/3S7kzvz
Wireless KB/Trackpad - amzn.to/48rheNm
Wireless 60% KB - amzn.to/3TORiaw
Xbox Controller - amzn.to/3vhFxir
USB - amzn.to/3TQbHMu
360mm AIO CPU - amzn.to/3UJwQYs
240mm Hybrid GPU - amzn.to/4a7YhzA
Electric Screwdriver Kit - amzn.to/3SRxEI7
6-32 3/8" Screws - amzn.to/3TPAMqv
6-32 1/2" Screws - amzn.to/4b6yrNW
6-32 1.5" Screws - amzn.to/4acnrgu
6-32 Heat Inserts - amzn.to/3zacOhr ( or any 0.219 in OD, 0.15 in Length, Female 6-32 Thread)
M2.5 Heat Inserts - amzn.to/4eA5yf5
M2.5 Assorted Screws - amzn.to/3QMnbP6
30W Soldering Iron - amzn.to/3pZ74CH
Heat Insert Tip: amzn.to/3q3GhoG
Comparable Spool Dryer - amzn.to/47WBXsk
Soldering Kit - amzn.to/3NWwQOR
Magnets - amzn.to/3vnlqj8
Side Cutter - amzn.to/3Qeat90
Crimp - amzn.to/3tK0Dpo
Molex Pins - amzn.to/3NUMCMp
Molex Extractor - amzn.to/3S9aNJJ
Stripper - amzn.to/4aK57wU
Curved Needle Nose Pliers - amzn.to/41Ns0vc
White Glue - amzn.to/3T9kJDn
Deburring Tool - amzn.to/4dm8njf
Dewalt Cutter - amzn.to/3M8ak48
Dewalt Blades - amzn.to/3PX1KZ2
Precision Screwdriver Kit - amzn.to/3NLSXXS
Pliers - amzn.to/3NhFZRU
Tweezers - amzn.to/3as2fKk
Cutting Board - amzn.to/3NPsrwN
Leica D-Lux 7 - amzn.to/3zjgHia
Audio Technica Mic - amzn.to/46FvMaV
Canon g7x mk2 - amzn.to/4a4hToq
LED Lighting - amzn.to/3x8ok8o
Light Ring - amzn.to/3tdSmGB
Tripod - amzn.to/3aEQnoz
Flir One - amzn.to/3NOVxwr

Пікірлер: 89

  • @absolutesadlad2297
    @absolutesadlad22972 ай бұрын

    the intro had me dying lmao. instant sub.

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    lol thanks, it means a lot!

  • @bacongamermanyes348

    @bacongamermanyes348

    2 ай бұрын

    bro fucking straight faced that 😭😭😭

  • @bacongamermanyes348

    @bacongamermanyes348

    2 ай бұрын

    @@standupg4m3r the editing and the video in general is really unexpected from a small creator, trust me you will go far my guy

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    @@bacongamermanyes348 My face has taken worse.

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    @@bacongamermanyes348 You just picked up my day, seriously. Thanks so much. More to come.

  • @makerunit
    @makerunit2 ай бұрын

    You've done it again, thanks for sharing this awesome build, very well done as always!! I'm actually literally almost done with my own (first) ATX design, which "accidentally" also ended up being printable within a 180 x 180mm print volume, but you beat me to it! :D One thing I find kind of funny since I'm from Norway is your SUG neon sign... in my language "SUG" means "SUCK", even though that's the opposite of what you do, because you're doing great! Just found it kind of funny.

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    Thanks for kind words again! No “accident” for the 180 cubed goal, it’s what our audience wants lol! I can’t wait to see your new case!!! Regarding my name… you’re gonna love my new shirt for the next. ;)

  • @makerunit

    @makerunit

    2 ай бұрын

    @@standupg4m3r haha I had an initial plan of the case being 350x350x220mm to fit the Ender 3 or similar beds. Then I started splitting up the parts and found that all the dimensions split in half would not be much bigger. So it was kind of accidental, but once I realized it I just played along 😁

  • @KillandMilproduction
    @KillandMilproduction2 ай бұрын

    Going to send it and print this. I have been looking for a 3d printed full atx case last few days and i didnt like anything i found this hits most of my needs.

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    Cheers! Thanks so much for watching and sending appreciation.

  • @perigee_vitz-wong
    @perigee_vitz-wong2 ай бұрын

    12:56 thank you for giving us the uncensored uncut version of this. I know you want your video to be clean, but I appreciate taking it raw. for real though, I only have a 180mm³ printer, and I'm considering this build for the future, and I want to know exactly what parts are mistake-prone.

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    Yooooooo! lol thanks for watching that far into the video. FYI - treat each part of the main case as “mistake prone” lol The system was designed to be printed flat. But like trying to encourage my wife to use protection, I’m not one to listen.

  • @SquintyGears
    @SquintyGearsАй бұрын

    As much as I wouldn't use this layout myself, using the hexboard as the base is brilliant. They're already designed to be modular and connected firmly. It's a really nice shortcut with the added bonus of making the outside surfaces usable

  • @standupg4m3r

    @standupg4m3r

    Ай бұрын

    I kinda agree on the layout… blocking the PCIE slots ain’t the jam. I probably won’t be touching ATX for a while, but will revise this sometime in the future. Thanks for watching!

  • @SquintyGears

    @SquintyGears

    Ай бұрын

    @@standupg4m3r personally I feel like mATX should be the layout everyone uses... ATX only really gets you 3 more 1x slots. Who the hell has anything to put in those slots and yet isn't going for an extended size with HEDT CPU or straight up server hardware. And on the other end itx makes a bunch of sacrifices to reach the size. I didn't check at all. But maybe that size difference makes it possible to print most sides as single pieces even on 250x250x250 printers (Mk3/4 and bambus) PS: the rest of the layout possibilities is left as an imagination exercise to the reader.

  • @standupg4m3r

    @standupg4m3r

    Ай бұрын

    @@SquintyGears believe it or not… my editing rig is getting 2 PCIE1x USB controllers on… with a 3rd likely on the way lol

  • @SquintyGears

    @SquintyGears

    Ай бұрын

    @@standupg4m3r oh no I do believe you. I have an extra USB card and wifi because I didn't buy a board with it built in originally. I meant really getting the extra slots from full size is rarely a useful thing. And usually it's because the system doesn't even support that many pcie lanes. So the stuff plugged in can't even be high bandwidth devices. So yeah you can get 12 more USB3 ports but it's functionally identical to getting a quality external powered usb hub because you can't hit all the ports at full speed. So getting the 5 slots from mATX (really it's 3 after the GPU covers 2 slots) covers everyone except solo professionals before they move to HEDT beaffy systems.

  • @standupg4m3r

    @standupg4m3r

    Ай бұрын

    @@SquintyGears with your logic and compartmentalizing users, we should all just be on Macs and consoles. The beauty of PCs is that affluent virgins all across the globe can stick whatever they want in what holes they have available to them in their PCs. 😝 PS - with bifurcation we can also perform DP.

  • @LifeandHobbiesVideos
    @LifeandHobbiesVideos2 ай бұрын

    Thanks! for sharing your talent with us .

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    Wow thank you so much. 😊

  • @SpiggyTech
    @SpiggyTech2 ай бұрын

    beautiful project!

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    Thanks a lot man! Can’t wait to see your new creation too! If you’re reading this, this user makes great 3D Printed cases too!

  • @raidboy7858
    @raidboy78582 ай бұрын

    So cool i think i will use this case for my 1st 3d printed pc😅

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    Thanks! It means a lot to know the design is appreciated. :)

  • @DuyLeNguyen
    @DuyLeNguyen2 ай бұрын

    This is cool, to me it's sorta like a single-chamber take on the Salvo Studios S700 (first prototype). Nice job!

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    Thanks! If I could print in clear filament I’d make windows for sure lol

  • @SaperPl1
    @SaperPl12 ай бұрын

    I see you're getting there to that 6K of subs. Can't wait to get those steam machine files to play around with them. As for this build, using the system for attachment is cool, but huge holes are something that is not safe with kits and pets.

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    lol it’s not safe for adults like myself too! I’ve already put my finger in the front holes moving the case around for the video and photos. I’m honestly surprised no one has just done the CAD on their own for the Steam Machine at this point lol.

  • @SaperPl1

    @SaperPl1

    2 ай бұрын

    @@standupg4m3r I'm too lazy with this kind of designs. I'm more into sheet metal :)

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    @@SaperPl1 can’t wait to see what’s coming up with your cases!

  • @johnbernarddeleon5139
    @johnbernarddeleon51392 ай бұрын

    Soo freaking awesome!! But u should use protection please!

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    L O L never!!!!

  • @giancarlolugo7048
    @giancarlolugo70482 ай бұрын

    Hey, awesome job on this. Love the looks of the design. Can this case be expanded as to make it a little longer and/or taller? For example to be able to fit a 360 radiator on the top, or to be able to install an internal reservoir, if I print extra side panel pieces. Would it be possible? Just curious…

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    Thanks! This scheme is extremely expandable, but the main question is do I want my eyes to bleed again? kzread.infoUgkxUYqxhK4TeYHuh7zkCYIeaOPfUYUaqeIZ But having said that, my Patreon does exists... ;)

  • @FedeHippo
    @FedeHippo2 ай бұрын

    would love an itx or micro atx version of this case also, you could quite easily make dustfilters for it, using some pantyhose sandwiched between 2 frames, that clicks into the honeycomb pattern

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    I was expecting your mATX/mITX suggestion even while I was designing this lol “stay tuned” Cool idea on the dust filter! Normally I don’t allow public modifications to my files - but I’ll give you specific exemption, just to show how easy it is to incorporate it in the current design. Please link me when you make changes to the entire case, not just one section. Cheers!

  • @joshhardin666
    @joshhardin6662 ай бұрын

    this 3d printed case looks really well designed and SUG did a fantastic job printing, finishing, and building this. HOWEVER... water cooling doesn't make ANY sense from a performance perspective UNLESS you've already got top-end components. i.e. in this system, the cost of a pump, rad, tubing, compression fittings, res, and pressure tester (Assuming you don't have one already) is MORE than the cost of moving to a 4080ti (maybe even a 4090) which would give much more significant performance uplift in a gaming-centric build or a 7950x in the case of a cpu/productivity build. sure, it looks fantastic, and yeah, it can make things a little quieter (though even that's questionable compared to the big beefy air coolers on some of these upper end 40 series gpus.) and cpu cooling wise, you'd get way more cooling out of something like a noctua l9x65 or a more typical tower cooler. especially once the liquid system is heat soaked (which takes about 30 minutes of a combination gpu/cpu load to happen). tl;dr: is this build awesome - ABSOLUTELY - is it something that someone should replicate? not really unless you want to throw down for a 7950x/4090 (or wait for the upcoming 9550x/5090 that'll be available in just a few months.

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    Thanks for watching anyway!

  • @joshhardin666

    @joshhardin666

    2 ай бұрын

    @@standupg4m3r I really didn't mean to be negative, it's a sick rig, certainly something to be proud of. - and there's room for upgrades if you want to go for broke resolution-wise. - it looks really flexible!

  • @hasyidanparamananda
    @hasyidanparamananda2 ай бұрын

    DAMN I WANT IT!

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    GET IT! lol thanks so much

  • @hasyidanparamananda

    @hasyidanparamananda

    2 ай бұрын

    @@standupg4m3r I think this case has great potential because the honeycomb, I can add so many thing for IO.

  • @littlefrank90
    @littlefrank902 ай бұрын

    03:00 just wanted to say to anyone who's new to 3d printing, to enable those kind of supports you have to look for "snug supports" in the slicer.

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    Thanks for watching and pointing that out!

  • @littlefrank90

    @littlefrank90

    24 күн бұрын

    @@standupg4m3r just finished printing and putting this together, it was a very nice weekend project! Thanks!

  • @standupg4m3r

    @standupg4m3r

    24 күн бұрын

    @@littlefrank90 NOICE!!!

  • @justinharvey9260
    @justinharvey92602 ай бұрын

    This is so cool! I love it! But what kind of filament did you use?

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    I don’t know what goes harder? My wife’s boyfriend, or my affiliate links in the description of the parts I used in the build. :) PS - thanks for watching!

  • @justinharvey9260

    @justinharvey9260

    2 ай бұрын

    @@standupg4m3rthank you for that. I didn’t see the filament part then saw it. But I don’t see the CPU block/pump or the other pump at the bottom, unless I missed it again

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    @@justinharvey9260 heyo! I haven’t linked those parts yet… mainly because I used what I had available but they aren’t ideal for this build - the pumps are just too weak. I have linked a search for 360 CPU AIOs and 240 Hybrid GPUs though - since those should work in this build.

  • @LifeandHobbiesVideos
    @LifeandHobbiesVideos2 ай бұрын

    that’s a lot of work but turned out really well 👏👏👏👏👍👍👍

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    Thank you for recognizing the effort! It means a lot.

  • @simont557
    @simont5572 ай бұрын

    38:50 - mate, that truly sucks. (lol)

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    kzread.info/dash/bejne/qYl5m5qjfq6fmbQ.htmlsi=5U7IgJgGQCRFAVwy

  • @mattsmith4993
    @mattsmith49932 ай бұрын

    This is amazing! Can I Mount an ITX Motherboard in this?

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    Thanks! mITX will work but I’d probably add more clips to join the pieces above the board.

  • @unLinuxeroMas
    @unLinuxeroMasАй бұрын

    can you do another one of this full size case but for bigger printers

  • @standupg4m3r

    @standupg4m3r

    Ай бұрын

    I’ll add it to my never ending list of future cases. :)

  • @kitwonghk2050
    @kitwonghk20502 ай бұрын

    Silly question, what type of filament do you use for the case? I know typical pla is risky for that.

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    Links for all materials, tools, parts, etc are in the description. What filaments do you use for parts near heat sources?

  • @MAJ4K
    @MAJ4K2 ай бұрын

    Me: Ahh my brother needs a case. The Video: my wife's boyfriend... Me: 😬

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    Your brother: 😛 (after getting a new case)

  • @genericnpc7865
    @genericnpc78652 ай бұрын

    Your wifes boyfriends idea to make you build sth like this was a good idea. looks cool and functional

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    For those reading, OP did not leave out an [ ‘ ] with “boyfriends”; it’s not singular. lol but thanks for watching and giving props. It means a lot.

  • @MrMaxStalsky
    @MrMaxStalsky2 ай бұрын

    Water loop is wrong. You have to go like CPU - 240 radiator - GPU - then 360 radiator. You c ando it as you did, but is way less effective.

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    Thanks for watching! Besides ensuring the pumps constantly have water, loop-order has little to no impact on water temperature and therefore component temperatures. But thanks for trying to help! www.ekwb.com/blog/does-loop-order-matter/?gad_source=1&gclid=CjwKCAjw9IayBhBJEiwAVuc3frTCeofwpiRLed2VLOfADgffreVgmxgoFFsHKsjObwTCFIbnSGkZ9BoClPUQAvD_BwE www.reddit.com/r/watercooling/wiki/faq/?share_id=HSpFrkcwFh6shoeIDqcDw&#wiki_19._what_order_should_i_run_my_loop.3F www.titanrig.com/blog/post/pc-guides-loop-planning?gad_source=1&gclid=CjwKCAjw9IayBhBJEiwAVuc3fhXoJQt3bKMeo7bym81C7uS0jjwiWiwbgop82dAYhSga6qVjZ1TPlRoC2bcQAvD_BwE

  • @flukeds5397
    @flukeds53975 күн бұрын

    What's filament tpye?

  • @standupg4m3r

    @standupg4m3r

    4 күн бұрын

    Linked in the description

  • @johncreech6828
    @johncreech6828Ай бұрын

    The heat inserts you linked are tiny AF... not 6x32! an annoying delay to hit in the build im making

  • @standupg4m3r

    @standupg4m3r

    Ай бұрын

    Fixed

  • @johncreech6828

    @johncreech6828

    Ай бұрын

    @@standupg4m3r youre the top g

  • @JosephPWagner
    @JosephPWagner2 ай бұрын

    wait no one has commented on the intro yet? lol

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    Just to update everyone, he loves it and my wife is thrilled; we went out for dinner and she let me pay!

  • @ClayTheFoxx
    @ClayTheFoxx2 ай бұрын

    just saw you on r/mffpc hiiiiiiiiiiiii :333333333333333

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    Glad to have you here! Thank you.

  • @skorpysk
    @skorpysk17 күн бұрын

    The Main issue i see, immediately off the bat How is this a "Full Size ATX" gaming pc if you block off every other expansion slot and can use only the main PCIe x16 slot

  • @standupg4m3r

    @standupg4m3r

    16 күн бұрын

    @@skorpysk I guess I should’ve called it (s)ATX; (Sorta) ATX™️ Does it also lose the ATX moniker, since there’s no drive slots to use all the storage I/O?

  • @skorpysk

    @skorpysk

    16 күн бұрын

    @@standupg4m3r It's a cool build, but I don't see the full usage of an ATX mobo if you can only use the top PCIe slot. Maybe you could make it thicker, bit taller. You could maybe fit the PSU under the mobo and that way no need for a sandwich style case. Or perhaps just make it mATX and that way you don't need to make it taller

  • @MatthewSemones
    @MatthewSemones2 ай бұрын

    wait... wet wipes, kleenex and lotion mounted to the side of your computer... WE DO NOT NEED TO KNOW WHY!!!

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    But you can imagine? lol thanks so much for watching. :D

  • @midnightrider379
    @midnightrider3792 ай бұрын

    My wife’s boyfriend 🤦‍♀️

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    lol we both have 7 free passes. I just haven’t used mine yet.

  • @skilledcamman4752

    @skilledcamman4752

    2 ай бұрын

    @@standupg4m3r I cant tell if its a joke or not.

  • @standupg4m3r

    @standupg4m3r

    2 ай бұрын

    @@skilledcamman4752 just like with anything outside your own life and sphere of influence - you can decide the reality. ;)

Келесі