A guy can thrive off what people throw away for sure.

Yeehaw that baby's running.!! Cool. Nice work guys.

@alanphillips556

2 ай бұрын

Looks like we got a scene skipper here fellas. 😆

When you rebuild the bush hog, replace the metal bars that go from the top of the three point hook up to the back of the bush hog with heavy chain. This will allow you to set the height of the front of the bush hog and allow the rear to float over the terrain while still being able to fully lift it when needed. It will also prevent stress fractures/bending and give you a better cut without digging in.

@garthsgraveyardgarage

2 ай бұрын

Appreciate the tip!

@michaelfischer7547

2 ай бұрын

@@garthsgraveyardgarage No problem, I just wish I could find these smoking deals by me lol

@carlbernard4197

2 ай бұрын

​@michaelfischer7547 Is almost impossible up here because of the temperature extremes and the salt used in the winters up.here makes things rot 😮😮😢😢😢

@michaelfischer7547

2 ай бұрын

@@carlbernard4197 I’m definitely glad I live in southern Louisiana. Most rust here is just surface rust.

Glad you fell into my feed. You have a new subscriber, brother. All the best from Wes up in Pittsburgh.

@garthsgraveyardgarage

2 ай бұрын

Awesome and thank you!

This was a great find for your property I never realized how big of a property you have once again I am always amazed at what you come across and get it running again great content

Very cool thanks for sharing glad this popped up

Hay fellows Just a fyi . Check the hydraulic and gear oil for water . Condensation or busted shifter boot will fill them up with water.

Since it was free it wouldn't hurt to put a little money in it. Such as a new radiator.

Nice little tractor and bushhog. I grew up on a farm around tractors, and Bushog since I was a child I can tell you one thing if I had been in the field when my dad was Bushhogging, I would’ve been able to sit down for a week they are beyond a doubt the most dangerous thing on the farm they can sling something out for over 100 yards so please be careful

Awesome!! We gotta get you to 100k subs! I need that Chevy Luv!

You can unlock the L&R brake pedals and use the brakes to turn tighter. Not unlike turning or cutting brakes on a sandrail.

You need to build a chain curtain for the mower to help keep rocks from shooting out from under the mower. 50:15

Cute tractor! Didn't see you on it🤔 Thanks for sharing! 😊 It's really good to see the little one! 😊

@garthsgraveyardgarage

2 ай бұрын

You missed the segment with me on it then! 😉

@rhondasweeney7271

2 ай бұрын

​@@garthsgraveyardgarage I'll have to watch It again. I stand corrected! You were on the tractor!!!!!😊😊😊😅

Another good one guys 👍👍

Dang it Garth I almost want to start a gofundme to replace the wood in iceman's tailor. Great video!

Very nice find. You will wonder how ever done without it. Next will be finding one with a bucket on front. Game changer. Enjoy the content you have.

Wait, gotta get my, “Iceman” coozie with a cold beverage in it, before I start watching the rest of the video.

Cool tractor....glad it works!

I absolutely love your videos. Keep em coming.

Hey, good to see you 'al

Hey, this video popped up in my feed, awesome content. Love seeing old vehicles and equipment being saved, you have a new subscriber!

@garthsgraveyardgarage

2 ай бұрын

Awesome!

Try using a cheap little Honda Civic radiator. That should be plenty to keep it cool.

what a find, japanese tractors are awesome

It has a 1000pto and 540pto, that brushhog is rated for 540pto

What a find

the sheet metal part of it looks like a yanmar. i have an 87 yanmar 226d which is like the JD750. i have the loader with bucket, snowplow, rear blade, brush hog and it has a JD cab thats been painted.

A learning experience.

Great find and a great runner!!!

We used to have old tractor like that high low shifter had to be in neutral to start with key

@garthsgraveyardgarage

2 ай бұрын

We tried that too.

Iceman sure needs to be in more first crank videos for sure.

That little engine should be similar to the 3 cylinder Kubota engines used for reefers 😊

@hamop3

2 ай бұрын

He sadit was a two cylinder

Ford blue, nice! Rail section for a front bumper, even better. Chevy Luv standing watch most better!

@BFVgnr

2 ай бұрын

With the intact paint, it might be worth trying the scouring powder trick to see if that rust is just on top of the paint, especially the streaky bits on the engine cover

I have an Allis Chalmers 5020 that I think was made by Hinomoto. 2 cylinder Toyo’s ha diesel engine. Mine is about a 79 or 80 model and runs fine.

Good job guys sounds good

Tractor sounds real good but the Ford shoe box looks real good

Cool film again guys, like I said, you twoske a good team.👍

Release compression while trying to start, then throw full compression back. It will fire off.

You go Iceman that looks like fun,❤LoveJim J&R mobile service and God Bless Y'all and your critters

First, if it's a standard trasmission, put the hi/lo in lo, and the main tranny in 1st, then just rock the tractor back and forth with the rear tires. Popped a few engines free that way. Second, check and see iffin a small Honda rad will fit, seen that on a MF 1020 rebuild.

Black pepper works great on radiator leaks

have more videos with the Iceman

Very cool find and great deal🤠🤠🤠

I got cataracts from getting PB blaster in my eye, I still don’t wear safety glasses but just an FYI. lol.

Tacos and tractors RULE !

@garthsgraveyardgarage

2 ай бұрын

Great bumper sticker idea!

A Hinomoto is a Japanese gray market, popular in the 70;s and 80's

They can be a little tough to find parts for but they made little tractors for a few main stream tractor brands back in the day

She just needs some love & care!

There's an adjustment on or near the 3 point hitch that will level out your brush hog. That way you can lower the deck to cut level and lower..

My first time running across your channel you got the tractor for free and it's a nice one I wouldn't mess with that mower I think I would go buy a new one?

@garthsgraveyardgarage

2 ай бұрын

That's probably what will happen.

I love that it's just a rebranded Massey ferguson

its air and water in the rear,that slasher looks a bit large for that tractor ,also the rear wheel has adjustment to level it that is the slasher ,they throw rocks/sticks would keep the child and animals well clear,did you check the gear box on the slasher ??check the specs as to slasher size for that HP tractor just a suggestion.

I wish I lived where you are you two are awesome guys, kind and funny I would be a lucky guy to have friends like you but I just wanted to say I never seen you check ✅ the oil in the tractor

@garthsgraveyardgarage

2 ай бұрын

First thing we checked, but didn't catch it on camera.

@bobbyhelm3969

2 ай бұрын

​@@garthsgraveyardgaragewà,

Nothing like a bit of oil in the face. Lol😂

@carlbernard4197

2 ай бұрын

Quick way to lube up for sure. Not fun getting B'laster in the eyeballs😮😮😢😢😢

can't never have enough stuff. one cool freebee.

Good running tractor

I have a E18 and still running great but had to work on lifting arms under power lift Good luck Southern equipment is the parts place if I remember right If not let me know and I will look it up on sales records and tell them 😊😊😊

A bush hog you run the tractor 🚜 at 2100-2250 and a ground speed of about 6 mph. 😊

Another tractor back from the dead sounds good a little tlc on the mower and it’ll be good to cut again

Slasher / as Americans call it Brush hog

next time to get the motor un seized you can tow it behind a truck going around 10mph and have it in neutral, put the clutch in pop it in first and see what happens

Central California watching

I wouldn’t of understood the hand motions you were giving when unloading lol.

Guard see if you have a tractor of graveyard around somewher you might find a radiator

i would not try to fix that mower body.. you can usually find a good one with a bad gear box for 150 to 300.. but i guess it would be content for the channel.. good score..

I'm glad to see you guys do other stuff other than cars and trucks don't get me wrong I love some old trucks and cars. But my question is what ever happened to the old Ford Ltd Galaxy for the young man's first car.?

@garthsgraveyardgarage

2 ай бұрын

It's in the lineup to finish up. There was a delay in him getting his license.

Make sure the manual fuel handle is pushed in.

Awesome tractor, i think i would just find another bush hog, and just braze up the radiator! Thats just too cool!

3/4" = 19mm 11/16" = 17mm 5/8" = 16mm 9/16" = 14mm 1/2" sorta kinda = 13mm 7/16" = 11mm 3/8 sorta kinda = 10mm I grew up working on VW and had a lot of SAE tools so I had to learn this stuff. I don't mind watching you guys work. Looks like you do alright together. When your Daughter found the washer I thought she found you a middle finger XDXDXD

@garthsgraveyardgarage

2 ай бұрын

I wouldn't put it past her! 😬

25:50 you moved way faster than my big hind would have.

👍👍

Might have broken pL control under power lift unit 😢😢😢

Try Hoye Tractor for parts.

The engine sounds ruff but good job

Will you be going to the Lone Star roundup?

@garthsgraveyardgarage

2 ай бұрын

I doubt we'll make it out this time around.

Transmission has to be in S position and clutch in to start.

@garthsgraveyardgarage

2 ай бұрын

Good to know! Thanks!

Liked the video except for one thing, please don't have your kids near a tractor running a shredder. Been running tractors for over 50 years. You saw how far it threw a rock. That could have been disastrous.

Plenty money in Texas. People here aren’t gonna give you anything. Want way more than its worth is norm Edit, I take that back a little. They will give stuff to other people with money. They won’t give a poor person that needs it a drink of water.

Is Hinomoto related to Hino Trucks? I think Hino = Toyota. Looking at that proofmeter and glowplug indicator (and a few other things) looks identical to my 1978 Ford 1600 (rebadged Shibaura). Interesting find.

@jasonnoteboom4489

2 ай бұрын

I’m still watching, but, the more things I see on it, the more similarities I see with my Ford/Shibaura. Mines a two cylinder as well, I think 1.3L, 3 sp + reverse (center shifter), low/medium/high range (right hand shifter), and PTO (left hand shifter). It’s a real bitch to purge the injectors (don’t run outta fuel).

@jasonnoteboom4489

2 ай бұрын

Oh yeah, sounds just like mine. Cool. If it’s another version of the Ford/Shibaura, it’s a pretty tough little unit. Nice.

JBWeld, liquid duct tape, lol.

What is your tractor oil pressure???,coolent temp??

@garthsgraveyardgarage

2 ай бұрын

We'll know once we replace the gauges.

Needs to run in a higher gear

save few them or ones dont find make pretty good stink eggs nice pos not much of fan them junk truth i flipped it