this is the duration of a full fuel tank of me just having some fun with the revo rocking the dynamite 26 mach 2, she has a novarossi pipe on her and i run 30% 10% bones brew nitro
Жүктеу.....
Пікірлер: 15
@hybrid32494 Жыл бұрын
sickeing bro!! watching right now, NitroGang!..
@PopesterRc
Жыл бұрын
keeping nitro great!
@SlickTrickRC Жыл бұрын
Nice and peppy. Love it. Rich and loud
@hybrid32494
Жыл бұрын
glad to see you here on this channel bro! whats up!.
@SlickTrickRC
Жыл бұрын
@@hybrid32494 ty brother.. loving the Nitros more lately. Just picked up a CEN Genesis limited edition with rear steer
@simplymentalOG Жыл бұрын
Sounds and looks great, just love hearing 2nd kick in, and its got some guts. I hate to admit it but not used any of my nitro collection in years, and really loved using them. It just became to limited to where could use them, then was always easier and less hassle from Karen's😒 to just going out with electric🤣. I really do miss it lol.
@PopesterRc
Жыл бұрын
yah i hear u dude, it does get limiting, thankfully i have a good piece of property to enjoy it and a good strip of pavement in front with no threw traffic to really worry about, thank you brother =]
@speedgears1236 Жыл бұрын
Nice bro
@carstenl87 Жыл бұрын
That thing is fast! Is it the platinum version?
@PopesterRc
Жыл бұрын
no sir its the "mine version" lol im jk haha but no its the regular revo 3.3 with hop ups and a bigblock conversion
@ramos.nitrorc Жыл бұрын
how did you mount this and what flywheel and clutch bell did you use?? i have a revo and I have this engine .26..just not installed..
@PopesterRc
Жыл бұрын
it installs with the big block conversion kit, had to trim a little of the servo box Infront of engine for clearance, the fly wheel is an Integy Large Flywheel Clutch Conversion For Traxxas T-Maxx Revo Slayer Truck from ebay, and i ended up using the regular revo clutch bells idr the teeth size maybe 13
@ramos.nitrorc
Жыл бұрын
@@PopesterRc thanks...any chane I can use the spinstart that comes with the .26 mach 2?? or only bumpstart like you have?? I currently have an M2C racing 36mm flywheel 3 shoe clutch on my 3.3 revo
@PopesterRc
Жыл бұрын
@@ramos.nitrorc i use the bumpstart because the backplate for the spin start and other methods just didnt fit, but i know ppl who trim and move the transmission up to make it fit but i didnt want to cut into the chassis, or some ppl cut into the rear A Arm behind the engine to accommodate for the pull or spin start but again i didnt want to make that a weak point on the Rc so its realy up to you, the correct bump start box is around 100$, but in my opinion its worth it, it makes it so easy to start every time
Пікірлер: 15
sickeing bro!! watching right now, NitroGang!..
@PopesterRc
Жыл бұрын
keeping nitro great!
Nice and peppy. Love it. Rich and loud
@hybrid32494
Жыл бұрын
glad to see you here on this channel bro! whats up!.
@SlickTrickRC
Жыл бұрын
@@hybrid32494 ty brother.. loving the Nitros more lately. Just picked up a CEN Genesis limited edition with rear steer
Sounds and looks great, just love hearing 2nd kick in, and its got some guts. I hate to admit it but not used any of my nitro collection in years, and really loved using them. It just became to limited to where could use them, then was always easier and less hassle from Karen's😒 to just going out with electric🤣. I really do miss it lol.
@PopesterRc
Жыл бұрын
yah i hear u dude, it does get limiting, thankfully i have a good piece of property to enjoy it and a good strip of pavement in front with no threw traffic to really worry about, thank you brother =]
Nice bro
That thing is fast! Is it the platinum version?
@PopesterRc
Жыл бұрын
no sir its the "mine version" lol im jk haha but no its the regular revo 3.3 with hop ups and a bigblock conversion
how did you mount this and what flywheel and clutch bell did you use?? i have a revo and I have this engine .26..just not installed..
@PopesterRc
Жыл бұрын
it installs with the big block conversion kit, had to trim a little of the servo box Infront of engine for clearance, the fly wheel is an Integy Large Flywheel Clutch Conversion For Traxxas T-Maxx Revo Slayer Truck from ebay, and i ended up using the regular revo clutch bells idr the teeth size maybe 13
@ramos.nitrorc
Жыл бұрын
@@PopesterRc thanks...any chane I can use the spinstart that comes with the .26 mach 2?? or only bumpstart like you have?? I currently have an M2C racing 36mm flywheel 3 shoe clutch on my 3.3 revo
@PopesterRc
Жыл бұрын
@@ramos.nitrorc i use the bumpstart because the backplate for the spin start and other methods just didnt fit, but i know ppl who trim and move the transmission up to make it fit but i didnt want to cut into the chassis, or some ppl cut into the rear A Arm behind the engine to accommodate for the pull or spin start but again i didnt want to make that a weak point on the Rc so its realy up to you, the correct bump start box is around 100$, but in my opinion its worth it, it makes it so easy to start every time
@ramos.nitrorc
Жыл бұрын
@@PopesterRc thanks!