Good job . You did well on the baxi . thanks for your efforts
@snapgas9832
Жыл бұрын
Cheers mate! Got there in the end
@carriesparks8434 Жыл бұрын
Great channel mate ...thanks
@snapgas9832
Жыл бұрын
Thanks Carrie
@deepthiwijekoon7283 Жыл бұрын
You videos are an asset for all gas engineers to widen their knowledge.
@snapgas9832
Жыл бұрын
I hope they help everyone! I learn everyday so just passing that on
@shaunmcc9861 Жыл бұрын
Top man Chris ....once again excellent knowledge and workmanship
@snapgas9832
Жыл бұрын
Cheers Shaun Thanks for watching
@train4905 Жыл бұрын
Exelent job sir
@snapgas9832
Жыл бұрын
Thanks Stephen
@alan_edwards_404 Жыл бұрын
Nice one for sharing fella
@snapgas9832
Жыл бұрын
Cheers Alan
@andymav3023 Жыл бұрын
State of that boiler at the end! 😂
@snapgas9832
Жыл бұрын
Needed some work mate I tell ya
@waseemkhaliq933 Жыл бұрын
Hi Chris get your self a washing machine hose to drain the filters when they are in an awkward or tight spot
@snapgas9832
Жыл бұрын
I can never find it when I need it 😂
@SuperWayneyb Жыл бұрын
🤘😎🤘
@snapgas9832
Жыл бұрын
👌
@jasonwhittle5008 Жыл бұрын
Great day mate 😎👍
@snapgas9832
Жыл бұрын
Cheers Jason Hope your good mate
@pb9926 Жыл бұрын
👍💪😎
@snapgas9832
Жыл бұрын
👍
@raypower5177 Жыл бұрын
Well Chris, great video again. Where did you get the sharder valve kit?
@snapgas9832
Жыл бұрын
Thanks mate it’s just a cheap 1 from Amazon Wakauto 32pcs Valve Core Remover Tool Kit with Valve Stem Cores Valve Core Removal Schrader 4-Way Valve Tool for Auto Car Bicycle amzn.eu/d/fwVDKR7
@AlexRocks24-7 Жыл бұрын
Hi Chris Great videos 👍 Just a quick tip but I'm sure you already know. The Danfoss trv's you using have a manual for flow or return on them 🤓
@snapgas9832
Жыл бұрын
Nice 1 Alex! I did know that (think it’s the grey cap can change the direction etc)
@AlexRocks24-7
Жыл бұрын
@@snapgas9832 I thought you might 👍👌 Next time you install one let the young and new plumbers know 🤓
@snapgas9832
Жыл бұрын
Will do Alex! Good tip!
@sheriefgerges7789 Жыл бұрын
Great video and knowledge, would like to ask. 1. To change the blue seal on the flue elbow is that just 4 screws around then slide out or there something else. 2. To change the white seal between fan and sump, do u need take burner out Thank You
@snapgas9832
Жыл бұрын
Pretty much but there are a few things to be careful of, The burner can come out with the sump but I’d just take it out anyway
@paulgardner3926 Жыл бұрын
Great vid Chris. Do you keep all these parts on your van? Must have a massive can!
@snapgas9832
Жыл бұрын
I keep stuff like the vaillant pcbs, and blue seals for that Baxi, loads of small bits, otherwise I go to merchants and collect bits or come back the next morning, I’ve got a transit connect haha so not massive
@matthewtrueblood408 Жыл бұрын
Wow, who was paying the bill on that one? Hope the customer had 3 star cover with BG. All those parts and issues could easily be eradicated by proper servicing on a yearly basis instead of a 20min safety & performance check.
@snapgas9832
Жыл бұрын
Yeah regular servicing would have helped but the main thing is it’s working
@rautemusic Жыл бұрын
there are replacement valves for expansion vessels? i usually change the whole thing once the valve is bad haha
@snapgas9832
Жыл бұрын
Yeah mate, but a Schrader valve kit like the 1 in the video and comes with the tool Drain down, pump up, remove Schrader and then put the new 1 then re charge Job done
Пікірлер: 38
Nice work. Thanks for sharing.
@snapgas9832
Жыл бұрын
Cheers mark
Good job . You did well on the baxi . thanks for your efforts
@snapgas9832
Жыл бұрын
Cheers mate! Got there in the end
Great channel mate ...thanks
@snapgas9832
Жыл бұрын
Thanks Carrie
You videos are an asset for all gas engineers to widen their knowledge.
@snapgas9832
Жыл бұрын
I hope they help everyone! I learn everyday so just passing that on
Top man Chris ....once again excellent knowledge and workmanship
@snapgas9832
Жыл бұрын
Cheers Shaun Thanks for watching
Exelent job sir
@snapgas9832
Жыл бұрын
Thanks Stephen
Nice one for sharing fella
@snapgas9832
Жыл бұрын
Cheers Alan
State of that boiler at the end! 😂
@snapgas9832
Жыл бұрын
Needed some work mate I tell ya
Hi Chris get your self a washing machine hose to drain the filters when they are in an awkward or tight spot
@snapgas9832
Жыл бұрын
I can never find it when I need it 😂
🤘😎🤘
@snapgas9832
Жыл бұрын
👌
Great day mate 😎👍
@snapgas9832
Жыл бұрын
Cheers Jason Hope your good mate
👍💪😎
@snapgas9832
Жыл бұрын
👍
Well Chris, great video again. Where did you get the sharder valve kit?
@snapgas9832
Жыл бұрын
Thanks mate it’s just a cheap 1 from Amazon Wakauto 32pcs Valve Core Remover Tool Kit with Valve Stem Cores Valve Core Removal Schrader 4-Way Valve Tool for Auto Car Bicycle amzn.eu/d/fwVDKR7
Hi Chris Great videos 👍 Just a quick tip but I'm sure you already know. The Danfoss trv's you using have a manual for flow or return on them 🤓
@snapgas9832
Жыл бұрын
Nice 1 Alex! I did know that (think it’s the grey cap can change the direction etc)
@AlexRocks24-7
Жыл бұрын
@@snapgas9832 I thought you might 👍👌 Next time you install one let the young and new plumbers know 🤓
@snapgas9832
Жыл бұрын
Will do Alex! Good tip!
Great video and knowledge, would like to ask. 1. To change the blue seal on the flue elbow is that just 4 screws around then slide out or there something else. 2. To change the white seal between fan and sump, do u need take burner out Thank You
@snapgas9832
Жыл бұрын
Pretty much but there are a few things to be careful of, The burner can come out with the sump but I’d just take it out anyway
Great vid Chris. Do you keep all these parts on your van? Must have a massive can!
@snapgas9832
Жыл бұрын
I keep stuff like the vaillant pcbs, and blue seals for that Baxi, loads of small bits, otherwise I go to merchants and collect bits or come back the next morning, I’ve got a transit connect haha so not massive
Wow, who was paying the bill on that one? Hope the customer had 3 star cover with BG. All those parts and issues could easily be eradicated by proper servicing on a yearly basis instead of a 20min safety & performance check.
@snapgas9832
Жыл бұрын
Yeah regular servicing would have helped but the main thing is it’s working
there are replacement valves for expansion vessels? i usually change the whole thing once the valve is bad haha
@snapgas9832
Жыл бұрын
Yeah mate, but a Schrader valve kit like the 1 in the video and comes with the tool Drain down, pump up, remove Schrader and then put the new 1 then re charge Job done