A Better Technique For Hand Making Collets?!
Check out the new Diamond Mounter merch!
cbilton.creator-spring.com A comment on the previous video (Never Make Collets This Way) someone asked if it would be possible to cut out a small flat disc and force it in to a collet shape.
It has potential to be a good technique as no pliers are needed to shape the metal and no soldering is done. If it works well it could be a great way to make collets quickly with no solder join.
I have never thought of doing this before and its always fun to try new things so here's a video testing it out!
I have recently join Patreon!
This channel has potential to grow in to a great archive of jewellers knowledge with your help.
With patrons support I will be able to offer far more information than I am currently able to.
With nearly 25 years of knowledge gained in the jewellery trade working with some of the best diamond mounters in the UK I can train practitioners of jewellery making, up to and far beyond the skill level found in High Street jewellers workshops.
I have been lucky enough to have been taught by actual Bond Street shop model makers and my ambition is to share what I have learned through out my career to as many people as possible.
My vehicle to do this is the Diamond Mounter KZread channel and now after nearly 1 year of uploading video guides, its time to take it up a level.
My ambition is to be able to make instructional videos with not just silver, but gold and platinum also. Some proper jewellers soldering equipment will enable me to create much more special pieces too! This will open up a whole new world of information I have to share.
There are many specific methods and techniques used for the different precious metals and knowledge about gemstones I can teach that will never enter my videos unless I am actually working with them.
If you may be interested in becoming a patron and supporting the channel to help it grow please click the link below to go to the Patreon website and find out about all the benefits that come with being a Diamond Mounter patron.
/ 5278612
There is now a new entry level tier which costs just £1 a month.
Its named the supporter tier which allows you to support the channel with out any substantial financial obligation. I will thank you personally on the next Diamond Mounter video uploaded!
I hope you will consider becoming a patron.
Thank you,
C.Bilton
With this channel I will share with you methods and techniques I have learned over the previous 24 years as a professional jeweller.
I specialize in high end bespoke pieces made the old fashioned way by hand.
I wish to document everything I know, continue to learn and make accessible to everyone rare skills and techniques only usually taught in high security jewellers workshops.
www.cbiltonjewellery.com
#cbiltonjewellery
@diamondmounter
www.etsy.com/uk/shop/CBiltonJ...
Пікірлер: 34
That's a brilliant tip. Making jewellery 25 years and living that you are constantly learning. Thank you.
Thanks for posting. I like your delivery style. No messing about.
For what it’s worth - I’ve made collets before by buying tube, cutting it down and then shaping it with the collet forming tool / punch. It does work but it’s not as good as the old school way. Much faster tho.
@michaeldalton470
3 жыл бұрын
Instablaster...
You are actually meant to start this process in your doming block. Try using your metal block to force your collet down then use the punch in your last. Learned from a very old jeweller.
I have practiced with copper washers, by purchasing at harbor freight. In the US, they have a pack of only copper washers for $5, and there are about 20 pieces in the pack. Also, i use the economy ring stretcher/reducer from Simond Store on eBay. Very useful and does the heavy lifting for you, especially for people like me with terrible arthritis in my hands.
All information you share is useful for me . I am watching your videos. Thx you
I really love how you will experiment with us!! Your knowledge and some new ideas makes great learning I think. If you have time I would love to see a video on making bails for pendants. We can do jump rings but it would be nice to see how to make a nice bail... Thanks so much for all you do!
@DiamondMounter
3 жыл бұрын
I will put it on the list!
a like and comment for the algorithm. great little tips, thanks again!
Starting right in that cone will really spread that hole. Can control it better by starting with a dead draw into your dapping block
What if you started by putting the disc into a doming block first then into the collet block
nice demo Chris
I guess this would be considered sinking - In theory there's a way of raising the outer edge up and compressing it inwards with very little change in thickness. Could be done by spinning it on a lathe, but that's a different game, especially at this scale.
Awesome idea doing that without a solder joint, almost like a coin ring! I have an idea as to how to get the top a little more uniform. What if you flip the collet over and hammer in the top a little so it slides further into the cone hole and then you can spread it back out more evenly with the punch? It’s hard to describe through text, I wish I could just show what I’m talking about.
Hey Chris, where would you recommend buying setting punches from? Love the channel, thanks for always sharing. Regards from a viewer in Aus xx
Good
I make coin rings @kendal_rings and iv thought about using this method to make collets but i still havnt tried it yet lol.. Iv punches an dies for the larger diameter 2ml silver coins.! Great video though Chris. It turned out not as bad as i thought.. See in coin rings we usually make a bigger hole that ones we would have in our collets, so its probably easier to move the silver maybe? But the second smaller on u tried didnt turn out too bad😬 lol
Great info/technique , thanks for sharing. That could speed up making collets a lot if you ever need speed and series in a job. In this video the edge of the punched collet was a bit uneven/raffelt because you hand sawed the disk. Now imagine you would also use a disc cutter punch to make the disk......how long would it take to make a collet or a dozen of collets compared to a collet like you used to make them?? . Old method you need to cut and file a strip first...than bend it ...solder it ..file the solder and then make it perfectly round using the collet die.With some experience in choosing the right size to cut the starting disk i bet a collet could be made under 5 minutes using the shown technique.
طريقه جميله شكرا
I want to buy a collet block. What size would you recommend ? Is a bezel block the same thing ?
Hi. I need the tool you using .. please suggess from where I can buy this tool.
Hey there, I have an odd question So our workshop relies heavily on donations and we have this device that looks similar to this machine thingie, only it is only one row of circles, and it opens in half and there are ridges on the inside. Any clue what it is and how we figure out how to use it? It’s been in the workshop for over a decade and nobody knows what it is
@DiamondMounter
Жыл бұрын
No idea! Is it part of a disc cutter??
@EKimatH
Жыл бұрын
@@DiamondMounter no, doesn’t seem like it. It isn’t like a smooth surface, the inside of the grooves have ridges, it’s strange
i use 1.5mm sterling, 16mm dia with a 1.5mm hole in the middle. Failed
@JADE-tu8xs
3 жыл бұрын
i think it's hard to do it properly. so i/m gonna stick to the old school way
@DiamondMounter
3 жыл бұрын
@@JADE-tu8xs lol yes the old way is best
Can you show how to make tennis bracelets
@DiamondMounter
3 жыл бұрын
OMG theyre so much work
@Yaoi155
3 жыл бұрын
Maybe show making just two links and connecting them
Translat to bangali