Love the thick wood! Great job!

Came out really nice! Good to see you're finding the time!

Fantastically done Robin. Always look forward to a video from you. I know they never disappoint. Hoping all is well Bud, Dirty Jersey out!!

Beautiful project as always - love the epoxy line.

Nice one great build as usual

Has to be one of my favorite projects. Very cool.

Nice project.

@RobinLewisMakes

2 жыл бұрын

Thanks

Beautiful piece, so glad to have you back!

@RobinLewisMakes

2 жыл бұрын

Thanks!

Have not seen you in a while great to see you back love your projects keep up the great work Robin

@RobinLewisMakes

2 жыл бұрын

Thank you

This turned out brilliant, love the epoxy line!

Great!!! Very interesting project

Well done Robin, another great build!

@RobinLewisMakes

2 жыл бұрын

Thanks Cord!

Looks great! Just thought I'd point out that a more ridged enclosure is almost always higher quality sound. Panel resonance distorts sound, so good choice of material. Also you may want to use some kind of gasket on that back panel to completely seal it.

@RobinLewisMakes

2 жыл бұрын

Ah right? In that case I totally did it on purpose haha. That’s good to know

Very impressed with your progress, very nice project. Cheers.

@RobinLewisMakes

2 жыл бұрын

Thanks Rod

Looks awesome! Great job!

@RobinLewisMakes

Ай бұрын

Thank you!

👍👍👍 Very nice

LED Amazing touch ... good job 👏👍

@RobinLewisMakes

2 жыл бұрын

Thanks

Throwing back to the MC days mate? 😉 Looks tops and the epoxy spacer was a great bolt of inspiration. ⚡

@RobinLewisMakes

2 жыл бұрын

Thanks mate

That turned out great Robin. I really want one of those edge sanders🤤 I added LEDs to my TV a few years ago I thought it was just a gimmick. But it’s proven to be a fantastic upgrade! If you ever need any plastic/3D printed parts hit me up. Cheers from Melbourne 👍🏻🇦🇺🍻

I haven't seen you for a long time, I'm glad you're fine... interesting project, fantastic design and good sound

@RobinLewisMakes

2 жыл бұрын

Thanks very much

There's quite a lot of science that goes into speaker design - depth of the box, volume, speaker type and as you say material choice too. I think you did a great job, it looks good.

@RobinLewisMakes

2 жыл бұрын

Thanks! Luckily there’s heaps of enclosure design tools out there, absolutely a science

Incrível amigo parabéns 🇧🇷

why pay for masterclass when Robin is here for us

Mark Dainer said to come here and see what excellent woodworking you do. So i`ll be watching from your first video to the latest. Cheer`s

@RobinLewisMakes

Жыл бұрын

Thanks mate! Maybe don’t go back too far haha

Muito bom, parabéns! Robertson (Brasil)

WOW, that is awesome. I'm gonna make one for myself now. Where did you get the amplifier that drives everything from? Awesome, awesome build, thanks for sharing.

@RobinLewisMakes

2 жыл бұрын

Thanks man. It was on eBay, there’s a few variations on the chipset so it might look different to the one I used

Lighting is very tasteful - not cheap and tacky like many LED applications!

@RobinLewisMakes

2 жыл бұрын

Thanks

I hope you can make a V2.0 of this... Promising project! Great Work! Subbed!

@RobinLewisMakes

Ай бұрын

Thanks!!

So this is a 3 channel amp with the crossovers built in? Nice!

@RobinLewisMakes

2 жыл бұрын

Yeah, great control built in. There’s a main volume, bass and treble for the mids (with a low pass) and then volume and frequency cut off for the sub

Elinize emeğinize sağlık güzel içerik olmuş 🔔🤝👍🏻

He’s back! Great video as usual but also what is the ‘eraser’ stuff that you used on the belt sander to clean it?

@toolsarecool

2 жыл бұрын

Sanding belt/disk eraser: www.amazon.com/Cleaning-Eraser-Stick-Abrasive-Sanding/dp/B000H69U7G I heard an old Croc shoe or sneaker sole works equally well! 8-)

@donnecheli2721

2 жыл бұрын

Cheers mate:]

👍

Nice job....it does seem that even the best speakers (for decades) have used MDF or similar for sound. The fancy ones just have hardwood veneers on them.

@RobinLewisMakes

9 ай бұрын

Thanks. I was always told mdf has consistency in its density, and no wood can match that. Hence it’s the material of choice

Awesome project, came out beautiful. I was keeping updated with the short stories so I was really looking forward to your video. Song suggestions : Black label society- in this river live version, Pantera, Lamb of God, Megadeth and of course Slayer lol 😂 great if you have a bad neighbor these bands will scare them :) Take Care

@RobinLewisMakes

2 жыл бұрын

Haha 😂 thanks mate

Great build Robin. How has it held up over time?

@RobinLewisMakes

2 ай бұрын

Thanks man! It still looks and sounds great. I was nervous about it being solid timber but there's no signs of splitting anywhere

@fathogwoodworking

Ай бұрын

@@RobinLewisMakes good that it’s not split with the solid timber. My lad wants an amp building for his guitar but I want it to look different to a store bought one so solid hardwood and some lights is the direction I’m heading. Thanks for the video, it was very useful. 👍

at 2:48 what kind of router bit are you using there?

@RobinLewisMakes

4 ай бұрын

It’s a 45 degree chamfer bit

I am using dindinmodern bluetooth speaker, which I think is very good among low-priced speakers.

Is hard wood better than mdf for boxes? Because I have enough oak to build a hundred of those.

@RobinLewisMakes

Жыл бұрын

I've read that MDF is the best option because the panels are uniform in density, natural wood changes across a board. Is it anything that you're likely to notice? Personally I don't think so, so I'd say go with the oak

@BostonMike68

Жыл бұрын

@@RobinLewisMakes I'm thinking of build the main boxes out of mdf and cover with the hardwood for look idk what it will sound like being so heavy and dense but I want to find out

...I bought a dindinmodern speaker last time. Although it is not perfect, it is the best among the products at the same price...:)

Awesome build, love the resin line!! But the obvious question is: Does it go to 11....? :-P Greetings from the Pacific Northwest!

@RobinLewisMakes

2 жыл бұрын

It sure does, right before my ears started to bleed haha! Thanks!

@toolsarecool

2 жыл бұрын

@@RobinLewisMakes 🤘🤲🏽

Great build. I heard RGB makes speakers 20% louder...

@RobinLewisMakes

2 жыл бұрын

Haha 😆 thanks dude

Hi

When you get a cordless circular saw… everything gets cut with a cordless circular saw…

The drivers sit too deep and are too far apart. For real quality audio that would be a no no