Thank you thank you thank you for making this video. I think you're the only one on the whole internet to torque test these. I came across these looking for a cheap ass brushless servo and was really blown away by it and I've been scouring youtube for weeks trying to find anyone that posted a real test on these. Besides 9IMOD's own channel you're the only one. I've been spreading the good word of these cheap ass servos for a little while but with the disclaimer who knows what the actual rating is, now I don't have to include the disclaimer anymore. 😅 Are you thinking of testing any of their other ones like 35kg, 45kg, 51kg or 70kg?

@WTFRCCars

Жыл бұрын

Just needed a few cheap servos for my tamiya TT-02 and another project I got going so thought I'd give em a try and test em as I'm at it and yeh there spot in, glad ya like the vid and if I need any higher kg servo or if 9imod want to send any over I'll test the rest of em but no plans at the min :)

Great Video!!! Everything I wanted to know. Thanks a lot man.

@WTFRCCars

Жыл бұрын

I try not to leave anything out :) glad ya like it.

I use a 35kg one in my Kraton 6s and it has been faultless so far very happy with it great test love it like the setup 🏁👍🏻👍🏻👍🏻🇬🇧

@WTFRCCars

Жыл бұрын

Yeh I've run a good few of them now in my touring cars and very impressed 👍

I've got a 45kg coreless that isn't very good, but the 45kg brushless I have is great. Great review.

@WTFRCCars

Жыл бұрын

I like to test em properly and have a look see if the advertised specs are what you get and for this one at least it's a fantastic value servo you would be in the £80 + range from any of the bigger named brands for the same spec and build quality

@SuperEightOneEight

Жыл бұрын

yes,,ive been using the 45kg brushless version for almost 2 years now..on my crawler and also 1/7 scale Cen Colossus MT...great servo for the price and endure the all year long bash.

I've had two 35kg DS35MG in my crawler (4WS) for a while now and they've been good and trouble free. I've also recently picked up some 51kg BLS-HV71MG for my 1/8th bashers, and one 71kg BLS-HV71MG for my Traxxas XRT. I've not tried the 51kg models yet but the 71kg has gone into the XRT and it seems very good on the bench. However, I have not run it yet for a bashing session. Overall, my experience with 9imod servos has been good and I suspect they are the OEM for other brands.

@WTFRCCars

Жыл бұрын

Yeh seem good so far :)

Thanks!

@WTFRCCars

Жыл бұрын

Welcome! and thanks :)

Awesome Servotester as well. Do we see more of that stuff? Some high torque ones or the one you already had.

@WTFRCCars

Жыл бұрын

If you look on the servo playlist I've done all the ones I have :) and yeh it's a great torque test rig not cheap to set up but works fantastic

Seems like a good servo. My only "disappointment" is that they don't appear to make any low-profile models.

@WTFRCCars

Жыл бұрын

These are good if ya want low profile kzread.info/dash/bejne/gmVnrtGoiLu_n7A.html

@WTFRCCars

Жыл бұрын

And these kzread.info/dash/bejne/Z5mksqOmmbLJdso.html

@ninthislandrc

Жыл бұрын

@@WTFRCCars AGFRC I'm familiar with...really good servos, at reasonable prices. PowerHD is also really good. Although I currently have only 2 AGFRC servos, I do have several PowerHDs in my boats.

@scalebuilder_sweden

Жыл бұрын

I have run these servos for a quite long time now both 35,50 and 70kg I haven’t broke one yet. I’m very happy with these servos. Great to see a proper review, thanks for sharing

@WTFRCCars

Жыл бұрын

Glad ya like it :)

I'm between the 25kg and the 35kg versions for an 1/8 nitro buggy (racing use). 25kg seems enough for steering, but with a 6v pack, it's only 18kg. Maybe for the accel/brake it's fine. What do you think? I also want to use a 2s lipo, but I can't find one smaller enough to fit in the receiver tray, and ideally I'd need a bec, but most of them are huge and certainly not fitting where I want it ito... Any suggestions? Also, nice video, earned a subscriber.

@WTFRCCars

Жыл бұрын

For my nitros I run 2s lipos so you get 8.4v when fully charged but both my receiver and servo can run 8.4v so I don't need a bec, I've never found any really small bec's, as for servo choice lots of people I know seem to run around 35kg for 1:8 scale.

Hi m8 another great video so I just ordered the 45kg version and specs say 6v it draws 5 amps my bec on the esc is only 6v but 4 amps will it damage the esc or will the performance be lower on the servo

@WTFRCCars

Жыл бұрын

Over time yes it can damage the ESC I would order a ubec very cheap and easy to use to power the servo plus you can run higher voltage and get full performance out of the servo

@scoobyrees

Жыл бұрын

Any suggestions on a good servo for a kraton 4s v2

@WTFRCCars

Жыл бұрын

Really depends on how much you want to spend

@scoobyrees

Жыл бұрын

£40 it's just for bashing

@scoobyrees

Жыл бұрын

What would be max servo amp draw I should look for with the 4 amp bec

Hi again, servo arrived. Want to use it as a servo winch. How get i the continious turning? Mine do the normal 180°. There is no normal potentiometer in it. It's a 4 pin + - DA CK. It has no stop. Any ideas?

@WTFRCCars

Жыл бұрын

You can't it's not a 360° servo you have 180° if you need a 360 servo you have to buy a 360 servo or an AGFRC programmable servo

@WTFRCCars

Жыл бұрын

Like this one kzread.info/dash/bejne/jHmCxaizkpnLibA.html