A basic walk-thru on how I resolved a clutch pedal bushing issue on my 99 F250 ZF6.
Жүктеу.....
Пікірлер: 13
@savagepete19834 жыл бұрын
Thanks for this. I'm getting ready to do this similar mod on my M5OD's clutch MC.
@patriciareynolds27293 жыл бұрын
my 92 f350 also had bushings worn out, dropped down and wallowed out the hanger. brake pedal bushing on other end ! started to remove seat and do it right, but shortcut it , miked hanger bushing, ordered copper bushing amazon and tightened into hanger behind splined shaft. bushing had coller to contact arm to clutch cyclinder arm.
@michaelcavanaugh585211 ай бұрын
Hey Tristan I just bought a complete clutch pedal assembly from 1A Auto on line for $180.00. I hope this helps. Thx Mike
@darrylmcleman64565 жыл бұрын
Good to let the setscrew thru into the pushrod. I am having similar grief with 98 Ranger. Where there is a will there is a way.
@dsruddell3 жыл бұрын
good job but now all that force is riding on that set screw vs the rod bottoming out in the new heim joint with the set screw just holding it in place
@ridgemanyt61545 жыл бұрын
Nice job! It was great seeing the entire assembly out in the open... the one I'm dealing with the pin that sticks out from the pedal snapped off, I think I'll buy the pedal assembly and remove the pedal... reinstall on the existing bracket. thanks for the video!
@johnmmm2 жыл бұрын
Need more lighting at the workbench too much shadow, good pieces of information.
@superchargedpotato6 жыл бұрын
At 23:00 when he shot the rod out of the slave cylinder and acted like nothing happened. Lol
@tristanlee85
6 жыл бұрын
Colt Troxel who needs it anyway, right?
@eczmead6 жыл бұрын
Save time as these are available on eBay setup to bolt on and go without modifying the joint at all. Time is money. Can be done without taking out complete pedal assembly. Looks like this is taking all day and night to complete the project. Still good info if you can't get one from eBay.
@tristanlee85
6 жыл бұрын
You most certainly can get them on eBay already modified, but locally was 1/2 the cost and no wait. Doing this in the truck is absolutely possible, and I would have went that route had I not decided to make a video on this mod. It was ~45 min job with the video and explanation. Had to break up the work for other daily activities. :) Appreciate the feedback!
@MRJPP2U
6 жыл бұрын
Friend, I can hear you say 10mm on the bolt and heim, could you give the leingth needed for both? Kind of a parts list???
Пікірлер: 13
Thanks for this. I'm getting ready to do this similar mod on my M5OD's clutch MC.
my 92 f350 also had bushings worn out, dropped down and wallowed out the hanger. brake pedal bushing on other end ! started to remove seat and do it right, but shortcut it , miked hanger bushing, ordered copper bushing amazon and tightened into hanger behind splined shaft. bushing had coller to contact arm to clutch cyclinder arm.
Hey Tristan I just bought a complete clutch pedal assembly from 1A Auto on line for $180.00. I hope this helps. Thx Mike
Good to let the setscrew thru into the pushrod. I am having similar grief with 98 Ranger. Where there is a will there is a way.
good job but now all that force is riding on that set screw vs the rod bottoming out in the new heim joint with the set screw just holding it in place
Nice job! It was great seeing the entire assembly out in the open... the one I'm dealing with the pin that sticks out from the pedal snapped off, I think I'll buy the pedal assembly and remove the pedal... reinstall on the existing bracket. thanks for the video!
Need more lighting at the workbench too much shadow, good pieces of information.
At 23:00 when he shot the rod out of the slave cylinder and acted like nothing happened. Lol
@tristanlee85
6 жыл бұрын
Colt Troxel who needs it anyway, right?
Save time as these are available on eBay setup to bolt on and go without modifying the joint at all. Time is money. Can be done without taking out complete pedal assembly. Looks like this is taking all day and night to complete the project. Still good info if you can't get one from eBay.
@tristanlee85
6 жыл бұрын
You most certainly can get them on eBay already modified, but locally was 1/2 the cost and no wait. Doing this in the truck is absolutely possible, and I would have went that route had I not decided to make a video on this mod. It was ~45 min job with the video and explanation. Had to break up the work for other daily activities. :) Appreciate the feedback!
@MRJPP2U
6 жыл бұрын
Friend, I can hear you say 10mm on the bolt and heim, could you give the leingth needed for both? Kind of a parts list???
@ridgemanyt6154
5 жыл бұрын
got a link?