I've been wanting to do this to my '99 and wasn't sure until I saw this. Thanks for the info and the hands-on approach to the video. I think I'm going to do this mod and try to install higher performance brakes at the same time. Good video bro!
@thomasindalecio25062 жыл бұрын
Thanks for the video brotha! This is probably the only video that shows it all thanks! I just got my kit last week and cant wait to install it!!
@818Vallero11 ай бұрын
Im glad to know that these would fit on my 96 singlecab tacoma ..definitely next project on the ol reliable
@boomman1234g2 жыл бұрын
convinced me to go with this kit, ill be returning when i install it, thanks so much 🙏
@tayrogarcia9613Ай бұрын
Thanks for the video I have a 98 extended cab tacoma been wanting to do a drop and I'm definitely going to start looking for this djm lowering kit for my tacoma
@xXPeRFecTz2 жыл бұрын
It’s almost 2am, came across this video and damn! Had to stay up and watch it cause I was excited that it was over 30min vid! Def brought back memories when I worked on mines😆 actually took 4 days for me to do this job on my 03 tacoma. I did this during the winter cold almost a year ago and I live in an apartment complex with no garage… wouldn’t get home from work till 330pm and I’d have an hour and a half to work on my truck till sun went down. Man it was brutal! Had to make sure I put all my tools away and truck back on the ground so nothing got stolen! Also with that factory shaft I ended up using a two arm pulley to get that f*cking thing out. Got a nice ball joint removal set from harbor freight for a good deal that came in handy. All about having the right tools to getting the job done right! Bunch of banging and torching later…. But you’re right man the rear was such a breeze. Wish the front could’ve been like that🤣 great video tho. You’re a gotdam beast💪🏾
@fantom1422
2 жыл бұрын
oh hey i see you’ve done the same thing to your tacoma as i have an 03 and so is there anything you can tell me that’ll help lowering it?
@xXPeRFecTz
2 жыл бұрын
@@fantom1422 what do you mean? This kit is one way to lower. Ball joint flips. Coil overs in the front blocks in the rear
@fantom1422
2 жыл бұрын
@@xXPeRFecTz oh yea i get that i meant to say whats some issues i could experience or have problems with while lowering it
@kainanbraun Жыл бұрын
That light bar on the front is sick as well!
@username_jr1332 жыл бұрын
That pickup looks hella nice, I have one, 2011. And I’ve been trying to get the truck a good look. I went with off-road look because that’s the style I wanted, but since it’s a 5lug taco I don’t have much options out there to fix it up like a 4x4 like the 6lug tacos. When I found out that you can drop em, I was intrigued. I do like the low riders.just cruising it. And I like cruising it on my truck. I’m really excited to get this kit. These are meant to be dropped not lifted.
@Mike-ig6jk6 ай бұрын
Well done , very informative !! Trucks looks great too !!
@sactomoto9108 Жыл бұрын
Nice work, looks sick!
@CristianSanchez-ou2yl2 жыл бұрын
I just recently bought a 1999 tacoma and I'm definitely considering on lowering it. Great vid btw!!
@dennissulio16712 жыл бұрын
Finally appreciate this vid brotha 🤙🏽
@juantrejo67405 ай бұрын
Nice looking I love it
@importantdocuments. Жыл бұрын
good thing you got that drill press.
@MC-br1gk2 жыл бұрын
Great job!
@miguel900rr2 жыл бұрын
Thank you for the video you're right there's no videos explaining this kit. By the way rims are badass but what offset are they
@davidadamgarcia2 жыл бұрын
Good job bro! Truck looks good any new updates?
@brotherbread6549 Жыл бұрын
Rim and tire sizes? Perfect vid bro
@rubentaboada3212 жыл бұрын
Great video Bro!! by the way.
@chusisg2 жыл бұрын
Si quema chuuuu 🤙🏼 Officially a tacuatche !
@davianderson87692 жыл бұрын
Video helped out a lot🤍🤍🤍
@pabloarellano50692 жыл бұрын
Dope video bro! Drop a link to the kit, ya quiero andar trokeando
@JTWorld2102 жыл бұрын
Awesome 👏🏼 again
@thomasindalecio25062 жыл бұрын
Quick question bro, did you just drill the traction bar? What about the bracket that goes on top of it? The one that holds the break line in place
@y2komar Жыл бұрын
awesome. you have a subscriber .
@Gr4yota2 жыл бұрын
Thank you
@markluedecke1942 жыл бұрын
How much did the kit and struts cost Im trying to drop my 97 this spring
@Ligma_Bolzack Жыл бұрын
How are the ball joints holding with them being changed from their original position? I want to lower mine with this kit but the safety and longevity of the lower ball joints worries me
@JoseLopezLeerParaCrecer2 ай бұрын
Could original bushings be used in those new JDM control arms? Personally, in other vehicles I have worked with those rubber bushings and they do not have enough useful life and even more so in a component that is in constant vibration and direction control
@dannyboy92 жыл бұрын
Nice pickup 👍👍👍
@thomasindalecio41842 жыл бұрын
brother where do you place the jack in order to lift the front?
@cris2k9212 жыл бұрын
Hey I’m getting this kit soon from dim wedsite and are you sure I don’t have to cut anything and also my shocks are bad and I wanna replace it .does it have to be lowering shock or can it’s be any shock?
@nicktolbert50262 жыл бұрын
I saw you wheels are 17x8 and 17x9 what is the offset of these?
@wrjeezy152 жыл бұрын
I ran the same kit on my 00 Tacoma bout 2-3 years ago. My only complaint was how stiff the ride was from the shocks
@luieflores5915
2 жыл бұрын
Yes it bottoms out real quick on bumps when I have a passenger I’m only 130lbs so it does good with me!
@gr8gator952 жыл бұрын
Thank you for the video. I'm considering doing the same thing to my 99 taco. Question... Did you have to get different shocks than stock?
@luieflores5915
2 жыл бұрын
I just order the ones djm offered. We will see how long they last
@sxk33t732 жыл бұрын
what are the size of the wheels?
@omarpena10742 жыл бұрын
I have bad squeaking noise!! Do u think is cuzzz I didn’t replace the socks ?? @Luie Flores 🙏
@seanzwiefka70562 жыл бұрын
Love what you did for the truck looks great. Any info on the grill ?
@luieflores5915
2 жыл бұрын
The grill is off of a 98 prerunner I just got a land cruiser front logo from the 80’s and plastic weld it together.
@seanzwiefka7056
2 жыл бұрын
Did you any special shims or camber kit to get the alignment?
@luieflores5915
2 жыл бұрын
No it all worked out with the oem shims. That upper control arm was design to make it perfect.
@martejr1232 жыл бұрын
Love your projects Very nice Can you please share the front end info I’m interested on getting the same front end as yours Or anyone that has the info please thank you 🙏🏼 nice work guys 🙏🏼
@luieflores5915
2 жыл бұрын
The bumper came like that. The grill I got a prerunners one and the logo from the land cruiser and plastic weld it together
@MrCoreymelton Жыл бұрын
I’m curious what you did about the front springs. Did you change them? This will be my first time lowering a vehicle
@luieflores5915
Жыл бұрын
No didn’t change them. It rides ok so I guess I lucked out lol
@juancarlosdiazcontreras3588 Жыл бұрын
Hi, what size are your tires?
@reverendvasco49072 жыл бұрын
Hey man, I appreciate the video. My truck is the same year and color and I'm planning on lowering it in the next couple of months as well! I was wondering what bumper you have on the front? I prefer your look to mine (which has the chrome insert)
@luieflores5915
2 жыл бұрын
Thanks bro. I think u got the fancier one. I also did the prerunner grill with land Cruiser logo gave it a better look.
@jeromepocaigue353
2 жыл бұрын
What’s the color called ?
@martejr123
2 жыл бұрын
@@luieflores5915 same here bro, I have a 96 and I would like to make the front end look like yours, very nice and clean , where is the bumper from ?? Thank you
@luieflores5915
2 жыл бұрын
The bumper cam from factory like that..
@thatpointinlife5 ай бұрын
Nice Taco! I have the same exact year and color. You've got me thinking about lowering her. How did this kit hold up 2 years later?
@luieflores5915
5 ай бұрын
Still doing good. Only thing I been thinking of doing is c notching the rear frame. It does bottom out sometimes but not bad
@glengonzales3605 Жыл бұрын
Because of this video, I decided to do this project myself. 04 Tacoma. My question is. I still have my stock wheels on it and I am rubbing on the top on the plastic liner. ( when I hit bumps) did you remove yours. I’m still deciding to go 17” or 18”.
@luieflores5915
Жыл бұрын
Mine only rub wen I have a passenger and I turn into a downhill driveway.
@javierrodriguez-kg5gl2 жыл бұрын
What Shock did you get?
@joty37833 ай бұрын
Where did you get that grill from ?
@mikeswanson88 Жыл бұрын
is the 97 front bumper almost flush with the grille stock? I have a 98 and the front bumper sticks out about 5" from the grille and I think the flush look your truck has is so much cleaner looking so I'm wondering if its a mod you did or does it come like that stock?
@luieflores5915
Жыл бұрын
That one came stock idk why they did that longer one..
@heyitschinoable Жыл бұрын
What are your wheel specs?
@jeromepocaigue3532 жыл бұрын
Size shocks ? Ex: (1900)
@jokerswild63022 жыл бұрын
Nice
@emilkibarov5205 Жыл бұрын
What grill is that?
@thomasindalecio25062 жыл бұрын
I love the rims bro. May i ask what is the tire and rim size?
@luieflores5915
2 жыл бұрын
Front are 17-8 tire 225/45 Rear 17-9 tire 255/40
@Rogueautosalon
Жыл бұрын
Love it luis, do you happen to know the offset?
@andres841992 жыл бұрын
Hey dude any updates on how the ride is? Do the blocks make it uncomfortable over harsh rods or big bumps?
@luieflores5915
2 жыл бұрын
Not at all, this thing feels about the same if not better.
@908Taco3 ай бұрын
Can I get the kit number trying to get those lowering blocks thanks in advance
@Blooskie2 жыл бұрын
Quick question around how long did it take before you got the suspension stuff delivered
@luieflores5915
2 жыл бұрын
Just about a week.
@stevetrimmins212911 ай бұрын
HI, can you tell me the angle of the tie rod ends on your truck? Ours is angled up quite a bit
@luieflores5915
10 ай бұрын
They did angle some but nothing to crazy.
@mikelada4611 Жыл бұрын
When you got it aligned, did you have a problem with camber?
@luieflores5915
Жыл бұрын
No it was all good
@redlightrael19932 жыл бұрын
Bro I been looking into a little nissan or toyota but they hold their value lol
@luieflores5915
2 жыл бұрын
Yea bro they make good dds Gas efficient and you could carry stuff with no problem 🙌
@MyRcGoSlow
2 жыл бұрын
Keep looking bro I got a deal like 2 weeks ago got a 03 Tacoma 2.4l 170k manual for 3.5k fausto_sicc2sicc if u want to see what I repaired on it
@MyRcGoSlow
2 жыл бұрын
But I was looking for like 1 whole year bro no lie
@951CD5accord2 жыл бұрын
Bro you need more subscribers.😪
@luieflores5915
2 жыл бұрын
Slow n steady bro. I’m still not good enough lol
@lozano12242 жыл бұрын
Nice video dude. Ill be ordering my kit now. Where do you live?
@luieflores5915
2 жыл бұрын
I’m in rogers Arkansas
@jorgegalindo64952 жыл бұрын
Hey bro do you have a different bumper because I like how it’s all flush mine pops out looks kinda weird
@luieflores5915
2 жыл бұрын
No sir, should be the oem. I think some came with that look u have.
@jorgegalindo6495
2 жыл бұрын
Fs thanks man !! I’ll probably just switch it out then thanks man
@lowboyjerry Жыл бұрын
Do you need the DJM shocks to be able to run the kit???
@luieflores5915
Жыл бұрын
No i just got them since mine were old
@dgrav65872 жыл бұрын
Don’t 2jz swap it, throw some boost at the rz. I’ve got mine on 7lbs and it’s a super fun ride.
@brokeandfamousgarage9538
2 жыл бұрын
What turbokit did you go with for the 2rzfe?
@dgrav6587
2 жыл бұрын
I built my own .
@dgrav6587
2 жыл бұрын
@@brokeandfamousgarage9538 dm me if you want pics and details.
@sebastienrebeiz7288 Жыл бұрын
Omg where did you get that sway bar ?
@luieflores5915
Жыл бұрын
Just the oem one. Just paint it yellow
@818Vallero4 ай бұрын
Where did you get that replacement front bumper?
@luieflores5915
4 ай бұрын
Some 96- 97 came like that from factory
@jesusmane13042 жыл бұрын
How long did it take for the djm parts to arrive
@luieflores5915
2 жыл бұрын
One week. I contact them an they said they had them in stock
@jesuscaster68502 жыл бұрын
Wow man
@Loweredtaco8 ай бұрын
Did you get an alignment after?
@luieflores5915
8 ай бұрын
Yes, best thing to do 🫡
@reeseb40052 жыл бұрын
What wheels you runnin? What’s the fitment?
@luieflores5915
2 жыл бұрын
I got the works vs-xx Front are 17-8 tire 225/45 Rear 17-9 tire 255/40
@sunshineupgrades Жыл бұрын
Where did you get the sway bar?
@luieflores5915
Жыл бұрын
It’s an oem one I just paint it yellow
@RayChris6717 ай бұрын
What size are your rims bro? Pls let me know
@luieflores5915
7 ай бұрын
I got the works vs-xx Front are 17-8 tire 225/45 Rear 17-9 tire 255/40
@youtuberosalvatex57228 ай бұрын
Hey what’s up how much did you pay for that kit
@luieflores5915
8 ай бұрын
I think it’s like $350-400. It’s cheaper on the djm website
@jonathanern93412 жыл бұрын
Bro where did you buy your front bumper and grill?
@luieflores5915
2 жыл бұрын
Bumper is oem. I custom made the grill with a 98 prerunners grill n the 80s Toyota Land Cruiser logo.
@jonathanern9341
2 жыл бұрын
@@luieflores5915 can you give me the link of the part number
@xXPeRFecTz2 жыл бұрын
Btw how’s it riding after a month? Noticed any squeaking? My sh*t squeaks like crazy bro! Over bumps and in/out of the truck It’s embarrassing… What grease you use?
@luieflores5915
2 жыл бұрын
No squeaking man. I had them before i did the drop rides good with no weirds sounds. thanks a lot for watching
@xXPeRFecTz
2 жыл бұрын
@@luieflores5915 nice I actually tackled mines after watching your vid… got rid of the squeak👍🏽
Пікірлер: 146
I've been wanting to do this to my '99 and wasn't sure until I saw this. Thanks for the info and the hands-on approach to the video. I think I'm going to do this mod and try to install higher performance brakes at the same time. Good video bro!
Thanks for the video brotha! This is probably the only video that shows it all thanks! I just got my kit last week and cant wait to install it!!
Im glad to know that these would fit on my 96 singlecab tacoma ..definitely next project on the ol reliable
convinced me to go with this kit, ill be returning when i install it, thanks so much 🙏
Thanks for the video I have a 98 extended cab tacoma been wanting to do a drop and I'm definitely going to start looking for this djm lowering kit for my tacoma
It’s almost 2am, came across this video and damn! Had to stay up and watch it cause I was excited that it was over 30min vid! Def brought back memories when I worked on mines😆 actually took 4 days for me to do this job on my 03 tacoma. I did this during the winter cold almost a year ago and I live in an apartment complex with no garage… wouldn’t get home from work till 330pm and I’d have an hour and a half to work on my truck till sun went down. Man it was brutal! Had to make sure I put all my tools away and truck back on the ground so nothing got stolen! Also with that factory shaft I ended up using a two arm pulley to get that f*cking thing out. Got a nice ball joint removal set from harbor freight for a good deal that came in handy. All about having the right tools to getting the job done right! Bunch of banging and torching later…. But you’re right man the rear was such a breeze. Wish the front could’ve been like that🤣 great video tho. You’re a gotdam beast💪🏾
@fantom1422
2 жыл бұрын
oh hey i see you’ve done the same thing to your tacoma as i have an 03 and so is there anything you can tell me that’ll help lowering it?
@xXPeRFecTz
2 жыл бұрын
@@fantom1422 what do you mean? This kit is one way to lower. Ball joint flips. Coil overs in the front blocks in the rear
@fantom1422
2 жыл бұрын
@@xXPeRFecTz oh yea i get that i meant to say whats some issues i could experience or have problems with while lowering it
That light bar on the front is sick as well!
That pickup looks hella nice, I have one, 2011. And I’ve been trying to get the truck a good look. I went with off-road look because that’s the style I wanted, but since it’s a 5lug taco I don’t have much options out there to fix it up like a 4x4 like the 6lug tacos. When I found out that you can drop em, I was intrigued. I do like the low riders.just cruising it. And I like cruising it on my truck. I’m really excited to get this kit. These are meant to be dropped not lifted.
Well done , very informative !! Trucks looks great too !!
Nice work, looks sick!
I just recently bought a 1999 tacoma and I'm definitely considering on lowering it. Great vid btw!!
Finally appreciate this vid brotha 🤙🏽
Nice looking I love it
good thing you got that drill press.
Great job!
Thank you for the video you're right there's no videos explaining this kit. By the way rims are badass but what offset are they
Good job bro! Truck looks good any new updates?
Rim and tire sizes? Perfect vid bro
Great video Bro!! by the way.
Si quema chuuuu 🤙🏼 Officially a tacuatche !
Video helped out a lot🤍🤍🤍
Dope video bro! Drop a link to the kit, ya quiero andar trokeando
Awesome 👏🏼 again
Quick question bro, did you just drill the traction bar? What about the bracket that goes on top of it? The one that holds the break line in place
awesome. you have a subscriber .
Thank you
How much did the kit and struts cost Im trying to drop my 97 this spring
How are the ball joints holding with them being changed from their original position? I want to lower mine with this kit but the safety and longevity of the lower ball joints worries me
Could original bushings be used in those new JDM control arms? Personally, in other vehicles I have worked with those rubber bushings and they do not have enough useful life and even more so in a component that is in constant vibration and direction control
Nice pickup 👍👍👍
brother where do you place the jack in order to lift the front?
Hey I’m getting this kit soon from dim wedsite and are you sure I don’t have to cut anything and also my shocks are bad and I wanna replace it .does it have to be lowering shock or can it’s be any shock?
I saw you wheels are 17x8 and 17x9 what is the offset of these?
I ran the same kit on my 00 Tacoma bout 2-3 years ago. My only complaint was how stiff the ride was from the shocks
@luieflores5915
2 жыл бұрын
Yes it bottoms out real quick on bumps when I have a passenger I’m only 130lbs so it does good with me!
Thank you for the video. I'm considering doing the same thing to my 99 taco. Question... Did you have to get different shocks than stock?
@luieflores5915
2 жыл бұрын
I just order the ones djm offered. We will see how long they last
what are the size of the wheels?
I have bad squeaking noise!! Do u think is cuzzz I didn’t replace the socks ?? @Luie Flores 🙏
Love what you did for the truck looks great. Any info on the grill ?
@luieflores5915
2 жыл бұрын
The grill is off of a 98 prerunner I just got a land cruiser front logo from the 80’s and plastic weld it together.
@seanzwiefka7056
2 жыл бұрын
Did you any special shims or camber kit to get the alignment?
@luieflores5915
2 жыл бұрын
No it all worked out with the oem shims. That upper control arm was design to make it perfect.
Love your projects Very nice Can you please share the front end info I’m interested on getting the same front end as yours Or anyone that has the info please thank you 🙏🏼 nice work guys 🙏🏼
@luieflores5915
2 жыл бұрын
The bumper came like that. The grill I got a prerunners one and the logo from the land cruiser and plastic weld it together
I’m curious what you did about the front springs. Did you change them? This will be my first time lowering a vehicle
@luieflores5915
Жыл бұрын
No didn’t change them. It rides ok so I guess I lucked out lol
Hi, what size are your tires?
Hey man, I appreciate the video. My truck is the same year and color and I'm planning on lowering it in the next couple of months as well! I was wondering what bumper you have on the front? I prefer your look to mine (which has the chrome insert)
@luieflores5915
2 жыл бұрын
Thanks bro. I think u got the fancier one. I also did the prerunner grill with land Cruiser logo gave it a better look.
@jeromepocaigue353
2 жыл бұрын
What’s the color called ?
@martejr123
2 жыл бұрын
@@luieflores5915 same here bro, I have a 96 and I would like to make the front end look like yours, very nice and clean , where is the bumper from ?? Thank you
@luieflores5915
2 жыл бұрын
The bumper cam from factory like that..
Nice Taco! I have the same exact year and color. You've got me thinking about lowering her. How did this kit hold up 2 years later?
@luieflores5915
5 ай бұрын
Still doing good. Only thing I been thinking of doing is c notching the rear frame. It does bottom out sometimes but not bad
Because of this video, I decided to do this project myself. 04 Tacoma. My question is. I still have my stock wheels on it and I am rubbing on the top on the plastic liner. ( when I hit bumps) did you remove yours. I’m still deciding to go 17” or 18”.
@luieflores5915
Жыл бұрын
Mine only rub wen I have a passenger and I turn into a downhill driveway.
What Shock did you get?
Where did you get that grill from ?
is the 97 front bumper almost flush with the grille stock? I have a 98 and the front bumper sticks out about 5" from the grille and I think the flush look your truck has is so much cleaner looking so I'm wondering if its a mod you did or does it come like that stock?
@luieflores5915
Жыл бұрын
That one came stock idk why they did that longer one..
What are your wheel specs?
Size shocks ? Ex: (1900)
Nice
What grill is that?
I love the rims bro. May i ask what is the tire and rim size?
@luieflores5915
2 жыл бұрын
Front are 17-8 tire 225/45 Rear 17-9 tire 255/40
@Rogueautosalon
Жыл бұрын
Love it luis, do you happen to know the offset?
Hey dude any updates on how the ride is? Do the blocks make it uncomfortable over harsh rods or big bumps?
@luieflores5915
2 жыл бұрын
Not at all, this thing feels about the same if not better.
Can I get the kit number trying to get those lowering blocks thanks in advance
Quick question around how long did it take before you got the suspension stuff delivered
@luieflores5915
2 жыл бұрын
Just about a week.
HI, can you tell me the angle of the tie rod ends on your truck? Ours is angled up quite a bit
@luieflores5915
10 ай бұрын
They did angle some but nothing to crazy.
When you got it aligned, did you have a problem with camber?
@luieflores5915
Жыл бұрын
No it was all good
Bro I been looking into a little nissan or toyota but they hold their value lol
@luieflores5915
2 жыл бұрын
Yea bro they make good dds Gas efficient and you could carry stuff with no problem 🙌
@MyRcGoSlow
2 жыл бұрын
Keep looking bro I got a deal like 2 weeks ago got a 03 Tacoma 2.4l 170k manual for 3.5k fausto_sicc2sicc if u want to see what I repaired on it
@MyRcGoSlow
2 жыл бұрын
But I was looking for like 1 whole year bro no lie
Bro you need more subscribers.😪
@luieflores5915
2 жыл бұрын
Slow n steady bro. I’m still not good enough lol
Nice video dude. Ill be ordering my kit now. Where do you live?
@luieflores5915
2 жыл бұрын
I’m in rogers Arkansas
Hey bro do you have a different bumper because I like how it’s all flush mine pops out looks kinda weird
@luieflores5915
2 жыл бұрын
No sir, should be the oem. I think some came with that look u have.
@jorgegalindo6495
2 жыл бұрын
Fs thanks man !! I’ll probably just switch it out then thanks man
Do you need the DJM shocks to be able to run the kit???
@luieflores5915
Жыл бұрын
No i just got them since mine were old
Don’t 2jz swap it, throw some boost at the rz. I’ve got mine on 7lbs and it’s a super fun ride.
@brokeandfamousgarage9538
2 жыл бұрын
What turbokit did you go with for the 2rzfe?
@dgrav6587
2 жыл бұрын
I built my own .
@dgrav6587
2 жыл бұрын
@@brokeandfamousgarage9538 dm me if you want pics and details.
Omg where did you get that sway bar ?
@luieflores5915
Жыл бұрын
Just the oem one. Just paint it yellow
Where did you get that replacement front bumper?
@luieflores5915
4 ай бұрын
Some 96- 97 came like that from factory
How long did it take for the djm parts to arrive
@luieflores5915
2 жыл бұрын
One week. I contact them an they said they had them in stock
Wow man
Did you get an alignment after?
@luieflores5915
8 ай бұрын
Yes, best thing to do 🫡
What wheels you runnin? What’s the fitment?
@luieflores5915
2 жыл бұрын
I got the works vs-xx Front are 17-8 tire 225/45 Rear 17-9 tire 255/40
Where did you get the sway bar?
@luieflores5915
Жыл бұрын
It’s an oem one I just paint it yellow
What size are your rims bro? Pls let me know
@luieflores5915
7 ай бұрын
I got the works vs-xx Front are 17-8 tire 225/45 Rear 17-9 tire 255/40
Hey what’s up how much did you pay for that kit
@luieflores5915
8 ай бұрын
I think it’s like $350-400. It’s cheaper on the djm website
Bro where did you buy your front bumper and grill?
@luieflores5915
2 жыл бұрын
Bumper is oem. I custom made the grill with a 98 prerunners grill n the 80s Toyota Land Cruiser logo.
@jonathanern9341
2 жыл бұрын
@@luieflores5915 can you give me the link of the part number
Btw how’s it riding after a month? Noticed any squeaking? My sh*t squeaks like crazy bro! Over bumps and in/out of the truck It’s embarrassing… What grease you use?
@luieflores5915
2 жыл бұрын
No squeaking man. I had them before i did the drop rides good with no weirds sounds. thanks a lot for watching
@xXPeRFecTz
2 жыл бұрын
@@luieflores5915 nice I actually tackled mines after watching your vid… got rid of the squeak👍🏽
What kind of wheels are those?
@luieflores5915
2 жыл бұрын
They are the Work vsxx.
👍
i got the 1999 tacoma the 2rz project
what size are the rims mate!!!
@luieflores5915
2 жыл бұрын
17” rims 9” wide in the back 8” wide in the front
how much was the kit??
@luieflores5915
2 жыл бұрын
www.lceperformance.com/DJM-Complete-Lowering-Kit-3-Front-4-Rear-For-1-p/5020006.htm
I think you're supposed to measure on the ground not on jack stands...
You need a vise on a table
What size tire are they
@luieflores5915
Жыл бұрын
They 17 205s
Where I can get that kit
@luieflores5915
Жыл бұрын
Just Google Djm I’m sure u will find the website
What rims? And size?
@luieflores5915
7 ай бұрын
I got the works vs-xx Front are 17-8 tire 225/45 Rear 17-9 tire 255/40
link to the bumper?
@luieflores5915
2 жыл бұрын
Oem came on the truck
@coochieman7880
2 жыл бұрын
@@luieflores5915 what size wheels and tires?
Hey bro those 18s or 17s
@luieflores5915
2 жыл бұрын
17s bro
You need to take off those mud flaps😮
Thoes mud flaps though....
Bro you speak Spanish?
@luieflores5915
2 жыл бұрын
Yes sir. I can’t write tho I can barely write English 🤣🤣
Bad as tacoma