SAVE ON LUBE SHUTTLE! Save 5% with code GWT on all Lube Shuttle Greasing Systems: www.lube-shuttle.us/store GOLDEN GREASE GIVEAWAY OFFICIAL RULES 1. Find the hidden image of the Golden Grease on our website for your chance to win a HOMEOWNER GREASING KIT! You can buy one now and get reimbursed if you win! goodworkstractors.com 2. We can ship to the contiguous 48 states only. 3. If you buy between March 1st, 2023 and March 31st, 2023 and win the giveaway, then you’ll be refunded! 4. How to enter: Must email your entry. No other way to qualify. 5. Deadline: 3/31/2023 at 12 midnight eastern time 6. Email: support@goodworkstractors.com 7. Subject: GOLDEN GREASE GIVEAWAY 8. Include: Name, email, and phone number, and link to the listing from our website that contains the hidden image. 9. What you win: Homeowner Greasing Kit containing Pistol Grip Grease Gun, 20 Inch Hose, and 2 Tubes of G200EP. 10. We’ll announce the winner shortly after the deadline passes! 11. It’s hiding somewhere on our website at goodworkstractors.com See the grease gun package you'll win at this link: CLICK HERE! and save 5% with code GWT! ___ Good Works Tractors is happy to be sponsored by Rim Guard Solutions! This is perhaps the most well-known ballast brand on the market today. Rim Guard goes right inside your tires, so it's out of the way, it doesn't freeze, and doesn't corrode. It's made from natural materials, so it's safe around livestock and pets if it spills out. Rim Guard liquid ballast adds more weight to the back side of your tractor improving stability, loader performance, and power to the ground. Find your closest dealer at bit.ly/3d0whX0 LOOK AT OUR MOST POPULAR ATTACHMENTS! Speeco Quick Hitch: bit.ly/3NFC0yl Stump Wrecker: bit.ly/3WYa6Tf VersaBracket Combo: bit.ly/3wUPrnl Snow Pusher: bit.ly/3NB4BVw Tillers: bit.ly/3GT1kk1 Core Plug Aerators: bit.ly/3W0R25q Pallet Forks: bit.ly/38wRztu Grapples: bit.ly/3PNNYaZ Dethatcher: bit.ly/3GT9Zmk Tractor Canopy: bit.ly/3IHcvNU WANT TO SAVE MONEY? CHECK OUT THE GWT DISCOUNT CLUB! Use code GWT at any of the vendors below and you will save cold hard cash :) I will also get a commission for the sale, so it's a win-win-win! USE CODE "GWT" TO SAVE BIG WITH: BUCKET BRACKETS @ www.jufabworks.com CUSTOM GRILL GUARDS @ www.5elevendesignz.com PTO QUICK ATTACH @ tractorptolink.com DIY HYDRAULIC SOLUTIONS @ www.summit-hydraulics.com TIRE CHAINS @ www.tirechainsonline.com PREVENT FLAT TIRES @ www.multiseal.us CULTIPACKERS & CRIMPERS @ www.packermaxx.com ALL OEM JOHN DEERE PARTS @ www.247parts.com ACCESSORIES AND BACKHOE BUCKETS @ www.muddscustoms.com CUSTOM TRACTOR FLOORMATS @ www.tractormat.com PROTECT, ORGANIZE, IDENTIFY HOSES @ www.outbackwrap.com BOX BLADES FOR ATV'S @ www.northwoodsfabrication.com HYDRAULIC SYSTEM PROTECTION @ www.hoseendchamer.com DUMP FROM THE SEAT MATERIAL COLLECTION SYSTEMS @ www.proteroinc.com POWERED SWEEPERS SWEEP UP ANYTHING @ www.sweep-all.com EASY WHEEL TOP LINK HANDLE @ www.tractoraftermarket.com TIRES, WHEELS, AND DUAL ADAPTERS @ www.millertire.com AMERICAN MADE CARRY ALL ON STEROIDS @ http:www.bigtoolrack.com THE BEST TOOTHBAR AND MORE @ www.heavyhitch.com 5% OFF WITH CODE GWT AT TRAC SEATS! www.tracseats.com SHOP: www.goodworkstractors.com AMAZON: www.amazon.com/shop/goodworkstractors SUBSCRIBE: kzread.info LIKE: facebook.com/goodworkstrac... FOLLOW: instagram.com/goodworkstra... MERCHANDISE: stores.inksoft.com/good_works_tractors_merch/shop/home *Discount codes cannot be combined with any other promotions, offers, or deals! **I choose to sell some products through 3rd parties instead of stocking items myself. Know that I will receive a commission if you choose to purchase through certain links. Thank you very much for your support! This video is for entertainment purposes only. Good Works Tractors (Good Works Lawn & Power, LLC) cannot be held responsible for content found in any video. Always reference your owners manuals, use extreme caution, and proceed at your own risk.

FYI. A straight extension on a torque wrench doesn't affect the torque value. It's only when you use an offset, swivel or other type adapter that you have to adjust the torque value.

@GoodWorksTractors

Жыл бұрын

Thanks for the confirmation!

@InsanePacoTaco

Жыл бұрын

The Torque limiting of the straight extension is a function of the extension's thickness. Torque Test Channel covered this in their video on the torque limiting sticks. Interesting stuff

@jodireid-wilhelm6954

Жыл бұрын

Straight extensions can indeed affect torque value if subjected to stress levels allowing it to reach its elasticity level which in some cases with higher torque values can be reached . Same principle as to why extensions on an impact gun have a negative impact on output torque, and also the same principle as to how torque bars work when installing lug nuts on wheels.

@carlstrohm3785

Жыл бұрын

Torque bars only work with an impact tool. They are designed to twist away at their set torque setting and spring back in the momentary break in force that comes with the hammer of an impact tool. Any extension can twist. The key is of course to use slow, even pressure when tightening with a hand tool. And anyone that can grab an extention and change the torque of an 18" wrench turning a nut/bolt by any meaningful amount should enter a grip strength contest.

Great tips Courtney, especially helpful in the spring. This is a great time of year to be checking your tire pressures as temperatures begin to change. Tip from RG: Blow a burst of air INTO the tire to clear the liquid from the valve stem before placing your tire gauge on the valve stem. This will minimize the amount of liquid that may enter your tire gauge (or on your shop floor 😅). As Courtney mentioned, we also recommend using an "air/liquid", "tractor", or "wet" tire gauge as they are designed to work with any liquid filled tires. Also, remember that Rim Guard is water soluble, so if you do have a spill it's as simple as rinsing it away with water.

💥 Lube shuttle is by far the best grease gun on the market. I love the no mess system they've invented. *Keep on tractoring!*

Another great way that sharpie can REALLY help you out, is writing the date/hours/miles directly on the filters, when maintenance is performed. Takes any guesswork out of it, and removes the need to write it down elsewhere, or try to remember. I've been doing that on all things I've been working on at home for years, and it really helps! Also, the military has taught me those lines on bolt heads or nuts are, appropriately so named, "torque stripe".

@kasken719

10 ай бұрын

My local dealer does this and I started doing it on everything. Very convenient and easy to do.

Important note: when checking hydraulic oil make sure the 3-point is down. Also, when checking air pressure with fluid filled tires, put air in with your air compressor first so the fluid won't spit back at you

@jamesbegley2700

Жыл бұрын

Especially any tire sealer!

In the military we do a pre-start everyday. Covering all the topics you’ve shown. At the end of the day it’s washed down and fueled. Ready for the next operation.

@GoodWorksTractors

Жыл бұрын

Sweet, sounds like I'm on the right track :)

I looked it up. Using an extension doesn't change the torque value enough to have to adjust the setting. However, you have to keep the extension straight so as not to change the pivot point. A u-joint can cause a big difference if at an angle, so it should be avoided.

@GoodWorksTractors

Жыл бұрын

Sweet, I was told wrong before. Glad to hear it!

@raybloom5727

Жыл бұрын

Duh

Just a FYI: be consistent in the pressure gauge you are using each time as they sometimes vary between models. I found this out while doing maintenance on my car. Also, check the manual for pressure needs, I used a sharpie to write it on the rim so I don’t forget…

@GoodWorksTractors

Жыл бұрын

Wouldn't have guessed that

@ni1469

Жыл бұрын

My pressures, wheel, and torque specs are sharpied on the dash in my cab tractors. In the army we stenciled tp# on the fender or frame above every tire and other needed info which is where I stole the idea from

While you have the sharpie out, write your tire pressure next to the valve stem so you don't have to look it up in the manual every time you check the tire pressure.

Besides putting a paint marker line on the lug nuts, I also write the torque settings and lug nut size on the wheel. I've got too many things with wheels to remember which one has what. And the Kubota L4701 has different sized nuts on the front and rear wheels. And just like on a car, lug nuts should be tightened in a star pattern, and with two passes. If some of the nuts are loose, when you back around to the starting nut after the first pass, a nut can be under-tightened. Hence, two passes.

@GoodWorksTractors

Жыл бұрын

Lol, good idea!

Great content as always Courtney! Thanks for the reminder on simple, preventative maintenance tips/checks. It'a the Slight Edge principle: easy to do, easy not to do! Make it a great one all!

Nice tip with the Sharpie. My dealer actually marked most of the common loosening bolts and nuts with a paint pen so they did the work for me!

I bought the lube shuttle and make sure lay it on it side and do not hang it up. I had a whole sleeve of grease come out the bottom.

As long as you're supporting the head of the torque wrench, the extension shouldn't change the applied torque in any meaningful way. Extensions will reduce the torque applied by an impact wrench as some of the impact energy is wastes twisting the extension. Once or twice I did see you tighten a nut just past the click so that's something to be careful about. Any time we're using a clicker it's good to have a reminder to back off the torque to zero so the springs inside don't stretch. I like digital torque wrenches now, you can see actual torque applied and they'll have a beeper at the set torque. You can even get an inexpensive digital torque adapter to use with any ratchet.

@JCWren

Жыл бұрын

At least one nut on the left rear wheel was way overtightened. I'd back all those nuts off and redo them.

@GoodWorksTractors

Жыл бұрын

Thanks!

@GoodWorksTractors

Жыл бұрын

Hmm, I stopped every time I heard the click

@JCWren

Жыл бұрын

@@GoodWorksTractors Check @ 13:39. Looks like you went about 1/8 or 1/10 turn past click. Given the leverage you have with an 18" bar, that's probably around 7 to 10lb over your target.

Great video Courtney, I really enjoy all your videos! Your channel is one of my favorites.

another good segment. very useful and instructional. the hack with the sharpie is a great idea. quick and easy way to see if you lugs are getting loose. thanks.

@GoodWorksTractors

Жыл бұрын

Appreciate you stopping by Cass!

Extensions do not change the torque value for static setups as shown in this video. If using an impact wrench it does affect the torque level because the extension twists slightly and the impact is momentary, not long enough for the fastener to seat at the full torque applied. The applied torque when using hand torque wrenches correctly allows the twist in the extension to last long enough to apply the full amount of torque to the fastener. Correctly in this case is a relatively slow application of force so the fastener turns and seats before "clicking" rather than a fast jerking force. Retorquing each fastener is also appropriate to assure each fastener is tight, similar to what is required for a cylinder head. Retorque each fastener until all do not move to assure content tightness.

When I first got my 1025R, there were a couple of tires that were always going low on pressure. Took it back to the dealer and the mechanic overfilled it. He said they’re supposed to be overfilled from the factory to ensure the tire seals properly. It worked for my issue, perhaps that’s what happened to your tires…just a guess. Love the sharpie idea, thank you Mr. Courtney!

@GoodWorksTractors

Жыл бұрын

Interesting, that just might be it. Thanks for chiming in Elaine!

Save your tractor by doing simple daily inspections. Good luck to all the contest entrants.

@GoodWorksTractors

Жыл бұрын

Yep, good luck all!

I use a sharpie on all oil filters with date and hours installed so at a glance I know when it’s time to change filters and oil.

Tap the air filter on a hard surface to shake the dirt out of the filter works as well. 😊

Love the grease fitting position and recessed protection. Not sure about air screen. Will soon plug with dandelion seeds. Big screen on hood would give more protection and be easier to clean. Nice tractor!

I have no actual knowledge to back this up, but I had heard if you use impact wrench extensions - those do have 'give' in them that can change the torque. As such I save their use for only impact wrench removal uses.

One time while mowing with the 1025r, I noticed it was overheating. I told my dad about it and the first thing he did was check the screen. It was covered in grass clippings.

Regarding extensions when torquing. I just watched a test. Extensions affect fastener torque only when using an impact gun. Tightening with a torque wrench or rachtet is not affected.

@GoodWorksTractors

Жыл бұрын

Awesome, sounds like I don't have to worry about it. Thanks Simon!

many good tips here i usually try to grease the main pivot points whenever i get ready to use but tie-rods and such can be over greased blowing out the seals but U_joints get LOTS of pressure . even in the winter check your radiator screen IF you feed hay or even moving dirt with your loader--wish that they had come up with the liquid ballast in the years back i have had several rims rust out from being filled with calcium fluid . i broke the axle tube on my Versatile 876 4x4 (260hp) twice, not a pleasant feeling quite sure loosing a wheel is right up there!!! tips from a lifetime of farming .

Coolant reservoir looks low to me. It's going to be interesting to see if there are any dealers in NC for those Summit tractors in the next couple of years. There are certainly Tractor Supply's in NC, but it looks like they are showing a limited number locations in three states. Looks like the closest dealer to NC is in Kentucky.

@kdegraa

Жыл бұрын

It looks low to me too.

@GoodWorksTractors

Жыл бұрын

Yeah, I specifically talk about this in the video :)

@canlungdoc

Жыл бұрын

@@GoodWorksTractors if coolant is low in overflow it's worth taking cap off (with cool engine) rad as filling that overflow tank doesn't fill the rad. You probably know this but for the general audience.

if using donaldson air filter assembly - most appear to; buy the gauge that tells you dirty your air filter is without having to open it. there is a little cap just on the elbow at the back it fits to.

Love my Lube Shuttle !

That first oil change was an experience on my Kubota LX2610. Not a lot of room for a filter wrench, and if you're a contortionist that helps😂 thanks for all the great videos

@CarrotDugTooDeep

Жыл бұрын

I have an LX2610 as well and mine was pained on from the factory. Wrench would not budge the filter. I had to score the paint and then punch a screwdriver through the filter to get it to break loose. It was the worst oil and filter change that I had ever experienced. At least it is no longer painted on and I didn't over-tighten it, so it should come off much easier next time.

A straight extension only reduces applied torque when using impact tools.

@GoodWorksTractors

Жыл бұрын

Good to know, thank you Tom!

Good tips, my grease gun always leaks and messy

@GoodWorksTractors

Жыл бұрын

I’ve had many stained from the leaks

About the high front tire pressure - you indicated that you had never added air to the tires. Tractors often ship with tires fully or even over-inflated to improve reduce bounce and improve stability. Since Summit has no dealer to set-up the tractor the pressures had probably never been reduced to the correct operating level.

You need a Lock-n-Lube grease coupler for that thing

My tractor came with marks on all of the critical torque bolts. My seller did it as a final checkout. Torque all bolts and mark them.

good video the lube shuttle looks cool

@GoodWorksTractors

Жыл бұрын

Thanks for watching!

" I break stuff on my tractor all the time, it's not my fault honest" ohhhh the look on your face when you said that priceless ha ha ha :)

inflate rear tire to get the ballast out of that big 2 piece valve stem before checking tire pressure.

As others have said, a straight socket extension will not change the torque reading. Definitely don’t use a higher torque value than recommended. Also, holding the extension isn’t the optimal technique as that can change the torque reading a little due to the friction with you hand. Better to rest your palm under the head of the wrench to hold the extension straight and let the head roll in your palm so that you aren’t impeding its rotation.

@GoodWorksTractors

Жыл бұрын

Good to know, thanks LT!

@jpjp3873

Жыл бұрын

What. Are you Steve Austin or something?😂

Good vid... my Lube Suttle worked great until I left it on the tractor, fell off the back bungee cord while the wifey was taking a ride around the field, now it dosen't hold a true vacuum. Let the search begin...lol

Do you check the torque on Wheel spacers

duuuude ! I never played with video speed before, thanks!!! slowest is kinda funny

Great video 😁👍I am impressed you greased the tractor and did not get it on your clothes. 😂Great helpful info. Thanks for the video 🚜💨☀

Man. The comments section is brutal on this channel sometimes. Let the man breathe!!!!

I have never greased a fitting without first wiping off the end of it. Any crap and dirt that is on that fitting WILL be added to your grease, causing wear. I have rarely seen someone do this these days. Once upon a time there were full service gas stations that did cars greasing and if you did not do this you would be fired. Especially equipment that is in the dirt a lot.

That little tractor is a headache to maintain compared to the Massey GC series. The Massey hood isn't in the way of anything and everything is super easy to get to.

straight extensions do not affect torque on a torque wrench. crows-feet or dog-bone style torque adaptors can change your torque settings. all dependent on angle of offset and lengths of the wrench and the adaptor.

@Idahoser11

Жыл бұрын

and the easiest way to account for that offset, is to turn the crow's foot to a 90 degree angle from the handle - then the offset is zero. You would need to calculate only when you get away from that angle - if you're adding to or subtracting from the natural length of the torque wrench

@carlstrohm3785

Жыл бұрын

@@Idahoser11 I'm pretty sure you're only supposed to use a crows foot at 90 degrees on a torque wrench without looking it up. Some of them have the torque multiplier per 12" of wrench printed right on them.

Great stuff - we appreciate you!

@GoodWorksTractors

Жыл бұрын

Thank you Steve!

The lube shuttle is the proverbial feline PJs of ‘lubin’’. That thing makes you almost Want to grease those zerks!

Hey Courtney, I’m a software developer by trade. I wanted to let you know I could easily build a script to loop through your web pages and look for that image. Not sure if it will change anything for you, but wanted to make you aware. Love the videos.

1:27 is that a steering stabilizer on the Summit? very nice...

@balconio1172

Жыл бұрын

oh interesting on 2nd look it has a pitman arm/drag link setup instead of rack and pinion? is that common on compact tractors? FWIW i would never speak poorly about recirculating ball... i liked the steering on my 2004 Suburban a lot better than my 2013 Suburban. big step backwards moving up to a GMT900 IMO.

The one thing that I can provide. When using the torque wrench you want to go to the click then do not go back over the nut. The torque value has been achieved when you get to the click. When you go do it over and over you are actually changing the torque values. One time click then done.

@GoodWorksTractors

Жыл бұрын

Yeah, that makes sense to me

Does 10 hours greasing intervals on the loader mean grease after 10 hours of loader operation? If so this could be 50 hours of tractor operation for many operators.

@GoodWorksTractors

Жыл бұрын

Yeah, 10 hours of loader operation

Doesn't the liquid ballast damage your tire gauge? If it was spitting the liquid out, then the liquid was getting into the gauge.

@GoodWorksTractors

Жыл бұрын

No, it cleans up with water

@GDyer-cl8fl

Жыл бұрын

I worked in the tire repair business quite a while. There are tire guages designed to get fluid in them w/ no damage. Just stick head of guage in clean water & pump the stick to flush it out. Also the tire should not be 100% full of fluid. Valve stem should be at 1200 when tech is filling it & he should stop filling just before level gets up to the stem. Thereafter whenever you check the pressure make sure the stem is at 1200 to minimize fluid in your guage.

just remember what helped ur channel grow.. summit will come and go john deere will be around along time. I get disapointed when u talk about john deere over summit. not saying its better or anything like that but just remember where u come from

i put the loknlube fittings on all my grease guns

@GoodWorksTractors

Жыл бұрын

Nice!

Looks like the summit could of got some better ideas about the engine compartment from massey.

Love the quote on your outro. Thank you

@GoodWorksTractors

Жыл бұрын

Glad you liked it!

coo1! ill take one.

I'm trying to figure out what is accomplished by jacking the loaded rear tire off the ground to check the pressure. I don't see the reason.

@Clydedude1

Жыл бұрын

Simply to get the valve stem @ 12 o'clock. I would have just pulled forward but if a floor jack was super handy, I would consider it. I doesn't change the reading. His may have been a little overfilled as only air should have come out.

@1967Twotone

Жыл бұрын

@@Clydedude1 Ah I see. I suppose inside a shop that might be necessary. I guess I was over-thinking it! Thanks.

I've noticed you don't do the wheel spacer advertisement anymore did you give up on them

@GoodWorksTractors

Жыл бұрын

RimGuard is my new channel sponsor. Sponsors change from time to time.

Nice tips. In this video, you said (as well as shown in the rules) that the contest was good until the end of March 2023. This is 2024. Was this a recycled video or is it a typo and the contest is indeed valid until the end of 2024?

@GoodWorksTractors

4 ай бұрын

I simply posted an older video in the Community tab. I do it all the time.

Its spring when they going to start selling the summit

@GoodWorksTractors

Жыл бұрын

Here ya go! summittractors.com/where-to-buy.php

Good Imfo ty I allso keep a record on all equipment . If I sell it goes to . Buyer 👴🏆🐕🚜🕺😎😊

@GoodWorksTractors

Жыл бұрын

Haha, not many do!

@richardbritton5280

Жыл бұрын

@@GoodWorksTractors old school Master Sargent Father 👨

I have Rim Guard in my wheels and double stacked wheel weights and 8 40Lb suitcase weights on my 1025R, the problem is sometimes the tires don't spin when the rims are spinning, tires are stuck in the ground. Would it be a good idea to put screws in the rims into the tire beads to stop it or not?

@GoodWorksTractors

Жыл бұрын

Hmm, that's a new one for me. Tires spinning on the rims and the RimGuard isn't leaking out? Every once in awhile I'm completely stumped.

@marshmellomatey

Жыл бұрын

@@GoodWorksTractors Tractor time with Tim had this happen to him in one of the early episodes, no leaking of Rim Guard.

@marshmellomatey

Жыл бұрын

@Xo Sa chains wouldn't help, the tires don't spin only the rims spinning in the tires.

@marshmellomatey

Жыл бұрын

@Xo Sa Tractor is a 2017 filled at that time so not new tires 5-6 years old.

@marshmellomatey

Жыл бұрын

it does not happen all the time only when it really gets stuck.

A grease gun was one of the first tools I bought when I bought my 2025r to keep everything lubed.

Your working Chris to hard if he's wearing sweatpants to film...

@GoodWorksTractors

Жыл бұрын

Hehe, I think he came from the gym that day...or not..I don't remember, ha!

@bmay8818

Жыл бұрын

*You're *too Whew, now my eyes aren't bleeding!

Hi

@GoodWorksTractors

Жыл бұрын

Good Morning :)

@cohenmason3949

Жыл бұрын

@@GoodWorksTractors good morning

7:39 THINK about this. How many people wipe the dipstick after they have checked the level and putting it back, like Courtney did? Why?? There's no reason to have to, but many do.

First!!!

@GoodWorksTractors

Жыл бұрын

Haha, nice! 🏆🥳🍾🎇🎈🙌

You used to be more of a John Deere channel, which I liked, now it seems like you’re a summit channel, which I don’t like. Why the change?

@GoodWorksTractors

Жыл бұрын

The only thing constant is change.

@xdude2x

Жыл бұрын

I personally like the variety, keep up the good work!

@mtweaver1978

Жыл бұрын

@@GoodWorksTractors I am glad that the channel isn’t brand specific. Plus, I wouldn’t think that would be a great long term business model.

@brianhillis3701

Жыл бұрын

He doesn't sell used tractors anymore.

@jamesagnew5607

5 ай бұрын

And that lime green paint on john deere is just way too expensive.

Excellent idea 💡 to line up the nuts to the wheel 🛞. I wasn't aware that you lose torque when using an extension. I don't think Kubota has that point in their manual. I am thinking no one else either. I look forward to some I sights by other viewers.

Courtney: Just mention when torquing the to do opposite lugs, not in a circular pattern. You DID it that way but did not mention it and some newbies may not know that is the proper way.......

@bhard_man

Жыл бұрын

The start pattern only matters if you're torquing for the first time, if just checking you can go in a circle

🟢Your videos are very informative.!!!🟢👍