Love the yard stripes 😍

@americandream_89

2 ай бұрын

Thanks buddy

Very informative, thanks for sharing

@americandream_89

2 ай бұрын

Glad it was helpful!

I did the new system 3 ATX370s 32s with 4+3 beadlocks they are perfect with the fender flares.

@americandream_89

2 ай бұрын

Sounds like a good setup. Do you like the system 3?

Do you have any issues with front end alignment? I have a 2 door and it pulls to the left terrible. The dealer aligned it, but still pulling to left. Also, I had a sound deadening installed on back wall, but still terribly loud.

@americandream_89

2 ай бұрын

So far I haven’t had alignment issues. Have you checked the threads on both tire rods as in how far they are from the locknut? If so, do they seem to line up evenly?

where are you whips, cube lights in the back and brackets from as well as the front light bar??

@americandream_89

Ай бұрын

This video in bio Click MORE below video Polaris xpedition northstar build and accessories kzread.info/dash/bejne/gHps2dqthpmuXaw.html

Other than the shifter area does it do a good job keeping dust out?

@americandream_89

Ай бұрын

Yes

Yep, that’s the machine I’m after. Hope so one day. Agree that I’m excited to see Can Am’s response to the Xpedition.

@americandream_89

2 ай бұрын

It’s a great machine. Y’all would have to switch your KZread name 😁

@UtahCanAmFam

2 ай бұрын

@@americandream_89 I know right!! I’d be branded as a traitor haha.

@americandream_89

2 ай бұрын

@@UtahCanAmFam at some point we all become a traitor in that since. Happy trails buddy

Can you link the whip lights here for me please? Having trouble finding them. Thanks!

@americandream_89

Ай бұрын

amzn.to/4bGkAxK

@americandream_89

Ай бұрын

Installing Fat Whip lights on or 2024 Polaris xpedition kzread.info/dash/bejne/ZJ6a1piAoJXJlMo.html

So did they fix the loudness inside it?Because I heard they were very loud. Thanks.

@americandream_89

2 ай бұрын

For now the only thing to compensate for cab noise(as in lower DB in cab) is to get the clutch kit offered from Polaris. That’s what I was referring to in the video. It works well but drops rpm over the range reducing peppyness over your throttle. I really like the factory power delivery so I haven’t got mine done.

@jeffvry4187

2 ай бұрын

I had my clutch updated and it’s still loud.

Can you please provide a link to your video on the sway bar shocks you have installed? Thx.

@americandream_89

Ай бұрын

Let’s get this polaris xpedtion to flex better kzread.info/dash/bejne/dKiAtqeoc67QXbQ.html

@scottgahimer2990

Ай бұрын

@@americandream_89 Thank you very much. Did you end up only doing the rear after all? Or front also?

@americandream_89

Ай бұрын

@@scottgahimer2990 just the rear. The really improve after about 50 miles of use

@americandream_89

Ай бұрын

Read the bio below video by clicking more

I have seen several of your Xpidition videos, which video has the added rear shock for the sway bar?

@americandream_89

6 күн бұрын

@@robthiessen1878 Let’s get this polaris xpedtion to flex better kzread.info/dash/bejne/dKiAtqeoc67QXbQ.html

@americandream_89

6 күн бұрын

@@robthiessen1878 Woods testing the xpedition sway bar shocks and tires kzread.info/dash/bejne/n6d3u8WjacKeqLw.html

@robthiessen1878

6 күн бұрын

@@americandream_89 That really helps! Thank you!!

@americandream_89

6 күн бұрын

@@robthiessen1878 glad to help buddy

How much air do you run in your tires?

@americandream_89

2 ай бұрын

Around 10-12 psi sometimes a little more

Dimpled Rotors were a failed experiment. They did disapaite heat better than the standard rotor but they caught more dirt and debris thus costing more to fix the brakes, calipers and so on

@americandream_89

15 күн бұрын

I could see that happening

What wheels are those? I like that look!

@americandream_89

28 күн бұрын

Thanks High lifter makes them but they are hard to find

@americandream_89

28 күн бұрын

www.kjmotorsports.com/high-lifter-by-sti-hla1-beadlock-15-wheels-machined-polaris-rzr-turbo-r-pro-r-ranger-1500-xpedition

Does your clutch clunk when engaging?

@americandream_89

2 ай бұрын

Yes

@icehog2367

Ай бұрын

That's a normal noise, it's due to the EBS machining that the helix has.