You got this vid out quick mate keep up the quality work

Your parents ought be very proud of you. Such a ray of sunshine of inspirational for hope for the younger generation.

@EverythingEbikeChannel

3 жыл бұрын

Well, thanks😁

Awesome set up you've got going there mate, thanks for sharing your journey and for the tips!

@EverythingEbikeChannel

3 жыл бұрын

Cheers mate!

Keep going, you are doing great work here! Been watching since V2 and Im impressed with your problem solving skills and ingenuity!

@EverythingEbikeChannel

4 жыл бұрын

thanks! Working on the next part but it's not quite gone to plan.

great video

Nice video.I am using same controller (SVMC72150 controller) While we are driving bicycle when it came at specific speed in low speed mode(30km/h) in high speed(40km/h), suddenly controller brake itself.How can we overcome this problem? Do you have any suggest? Could you help me about this problem?Thank you.

Hi, do you always set 95v in the over volt field? I have a sabvoton 72150 to program.

@EverythingEbikeChannel

Жыл бұрын

I set it high so it never kicks in. I'm using my BMS for overvoltage and overcurrent as my sabvoton doesn't measure them very accurately

@majkel248

Жыл бұрын

@@EverythingEbikeChannel ok thx😉

Hi man I have a trouble conecting sabvoton with cable that I didn't get in package what cable are you using thanks

@EverythingEbikeChannel

2 жыл бұрын

The one in the package worked fine for me. Have you got the large end connected to the computer and normal usb port connected to the controller?

Can I use the 80 amp controller for a 1500W hub motor? I was thinking I could turn down the current to45 A? Last night I purchased the 45 amp version but I think I’m going to cancel the order and order the 80amp version and hoping for more power out of my 1500 W motor. Also I probably will upgrade to a more powerful motor in the future…So do you recommend that using a 80 amp controller and just lowering the current? I’m thinking I will get more power sinceThe 80 amp version is much beefier than the 45amp

@EverythingEbikeChannel

3 жыл бұрын

Absolutely go for the 80a one and then tune it down. You can completely customise these controllers and of course you can only tune them down not up! The 1500W motor will almost definitely be able to handle much more current that it is rated for for short bursts

Hi, your vids are very helpful. I have a quick question if you can help? I have a qs273 3.5t and a sabvaton 72150 and my bike is very slow off the line, any changed I can do to throttle voltage or anything to make the off the line speed any faster? Thanks

@EverythingEbikeChannel

2 жыл бұрын

What is your max phase amps set to?

@speedyrules7

2 жыл бұрын

@@EverythingEbikeChannel hey, thanks for the response, max phase current is at 350amps

Could you tell me please how are you configured those flat batteries to produce 30 amp hours at 72 v

@EverythingEbikeChannel

3 жыл бұрын

It'll actually be 40ah at 52v. Each cell is 40ah @ 3.7v so I'm connecting 14 in series and 2 in parallel. 28 cells total

I had the same problems awhile back turns it he just need a new battery that can handle his controller & hub.

hi hope you are well thanks for all the videos you have posted already although please advise what to do doing a hall sensor test please post a video thanks so much

where did you get the software for pc? I am having a hard time finding it to download.

@EverythingEbikeChannel

4 жыл бұрын

So did I at first! All the manuals and software are here www.mqcon.com/menu/downloads.html. It's the 'English Interface' one

Great Video. I can't find the computer software. Could you help me find the software for Windows? I would really appreciate it. Thanks.

Say buddy I wondering if you can help me with a problem?? I ordered An Ebike with the Sabaton 72150 (M) 72v 150A controller asked to to add alarm plugs but they didn’t. So I want to an alarm. I know the Orange wire goes to the key switch non voltage side (controller side) to power controller. The Brown wire goes to motor signal wire. But not sure where to connect the Blue anti-death wire since my controller did not come with one. I read in a forum I can connect that wire to battery negative to complete the (motor signal) connection. Do you think that’s possible? Thanks

@yourstruly9340

Жыл бұрын

Oops orange to ignition, brown to blue controller phase, blue to ?? Not sure

Hi i have some question for your bike hub motor look like 3kw motor but you use 8kw controller so does it no problem?

@EverythingEbikeChannel

3 жыл бұрын

Hi mate, the 3kw rating is a very safe continuous power rating that the motor can acheive with no extra cooling. Even with no cooling these motors can do 5kw all day and with some heatsinks and ferrofluid, I've seen people do 14kw bursts for a few seconds no problem.

Can I unlock my 150a controller and have you done it yet

Hi Nice ebike I have built something similar. I am thinking of upgrading my controller to a sabvoton but only have a 1000w hub motor with 52v battery, do you think its worth it? I will upgrade the motor later on 😀 cheers.

@EverythingEbikeChannel

3 жыл бұрын

Thanks! Tricky one with yours as sabvotons are normally used with 2kw or above motors, however you can both tune the sabvoton down and give the motor a bit more current that it's rated for without a problem (1.5-2kw peak). Sabvotons are really smooth and have some nice config options that you usually don't get on cheaper controllers so. If you're upgrading your motor later on anyway and your battery can handle it, you might as well get one to play around with on your current setup? Hope this helps

@peterdewey3395

3 жыл бұрын

@@EverythingEbikeChannel thats great thanks, all I am actually after is an increase in torque to accelerate quicker, top end is fine, anything I can do get this from what I've got? Cheers

@EverythingEbikeChannel

3 жыл бұрын

From my experience with the sabvoton, low end torque is definitely a strong point. You can configure where on the throttle curve you want the power to come, but by default it just wants to go and I have to be careful making U-turns even at 2kw as if I give it full throttle, it will just go nuts! What controller have you got at the moment - is it a generic silver one?

@peterdewey3395

3 жыл бұрын

@@EverythingEbikeChannel yes its just the one that came with the kit

@EverythingEbikeChannel

3 жыл бұрын

They're not the best but they'll get the job done. Personally if you're upgrading anyway, I'd get a sabvoton with the new motor if not before and have a play around.

Hi mate I’ve got 12000w hub motor and It was all working fine I’ve changed the tyres and I’m getting hall Sensor error /error 40h and I’m using the same software that you’re currently using in this video

@EverythingEbikeChannel

2 жыл бұрын

First check the hall sensor connect that none of the wires have been pulled out. If not, it could be inside the motor which is either bad timing with the tyre or caused by a knock.

Hi i have the same frame as yours, and i bought the same batterys as yours (from the same man ) i was wondering how much you would charge to do a battery the same as yours , but i want a daly 500A bms what im getting soon please let me know if you can ,nuff respect 🙏

@EverythingEbikeChannel

Жыл бұрын

Problem for me is time mate, I'd love to do more builds and help others but don't have the chance to do it :(. I think my whole pack cost ~£600 which is very good for it's capacity but I've found out these cells were developed around 2007 so using older chemistry and have relatively high internal resistances so voltage sags quite a bit under load.

Hi Everything Ebike. I am having trouble with installing the MQCON software. It keeps on reporting runtime, however I can not fix this with any suggested method online. Would it be possible for you to share the program you have installed? Thank you

@EverythingEbikeChannel

2 жыл бұрын

I get mine from www.sabvoton.net/downloadlist/ and it's called 'MQCON-English Interface'. It's an installer that provides all the secondary software needed aswell

@maxwraae6244

2 жыл бұрын

@@EverythingEbikeChannel Thank you so much for you answer! I have tried again for a few days, but with no luck. It keeps on saying it has a runtime error. Did you stumble upon this?

@maxwraae6244

2 жыл бұрын

@@darmar2000 no succes’s gave up

would you recommend this controller? or is there a better alternative? it seems like everyone is using sabvoton

@EverythingEbikeChannel

2 жыл бұрын

Not anymore no, had too many problems with it although they're know for delivering a lot of power. I've heard good things about Fardriver which are meant to be the replacement for these so hopefully more reliable...

@spirobel

2 жыл бұрын

@@EverythingEbikeChannel thanks for the info! noted. What do you think about no name controllers? are they any good?

those psu's would be in series if 2x24 =48v, i think you said parralle, im sure you knew that, but others may not know

@EverythingEbikeChannel

3 жыл бұрын

Oh yh my bad! I'm on the lookout for a good charger at the moment that can do around 1500w+, but they're either pretty expensive or too big to be portable 😕

Hi. Wonder if you can help me solve O2H error on a Sabvoton 7280 controller

@EverythingEbikeChannel

2 жыл бұрын

I don't actually know what that means, but I think it's an overvoltage error. Check the max voltage isn't set higher than your battery voltage and also that the throttle min value isn't higher than what the throttle outputs at rest.

hope you got your wheel straightened out

@EverythingEbikeChannel

3 жыл бұрын

Completely relacing if you keep an eye on my latest vids

Hi so you are running it with out a display I also by pass the display I’m having a problem passing 32mph something wrong .. I have 52v 2000w hub motor 100amp controller can you help me

@EverythingEbikeChannel

3 жыл бұрын

You mean there's like a speed limit?

@invadersinfestation7915

3 жыл бұрын

@@EverythingEbikeChannel yeah or stuck I took the I have it on no limits but still stuck... when I had my out Asi controller 40amp is hit 47 mph.. now with the sabvonton controller it’s at 100amps I have a lot more torque but stuck 32mph

@EverythingEbikeChannel

3 жыл бұрын

@@invadersinfestation7915 Are you programming it through the app or the pc software?

@invadersinfestation7915

3 жыл бұрын

@@EverythingEbikeChannel the app

@EverythingEbikeChannel

3 жыл бұрын

@@invadersinfestation7915 Could you send me screenshots of the setting to cgouldstone45@gmail.com ?

Why do you have to do the hall sensor test before you connect the throttle? I have the same frame :)

@EverythingEbikeChannel

3 жыл бұрын

It calibrates the controller to work with your specific motor. If you try and use the throttle before this, it won't be running efficiently and either the motor or controller with burn out. It's happened to people!

@jasonmiddleton5491

3 жыл бұрын

@@EverythingEbikeChannel ah so it should be fine with the throttle plugged in as long as you don't use it before the hall sensor test

@EverythingEbikeChannel

3 жыл бұрын

@@jasonmiddleton5491 Oh yh you can plug everything in, just run the test before you use it

@jasonmiddleton5491

3 жыл бұрын

@@EverythingEbikeChannel thanks,

@jasonmiddleton5491

3 жыл бұрын

@@EverythingEbikeChannel question, on my controller I have a cable labelled "speed limit" - any idea what this is for?

Whhere do you download the software

@EverythingEbikeChannel

Жыл бұрын

www.mqcontroller.com/list/?classid=4

ciao sono un tuo nuovo iscritto

Do you know anything about unlocking?

@EverythingEbikeChannel

3 жыл бұрын

I know you can buy these unlocked from the factory, but I also came across a forum post a while ago with loads of manuals and the most up to date software. In there was a program which appears to unlock the controller but I have no idea whether it works and obviously would void any warranty. Its the 7th post down endless-sphere.com/forums/viewtopic.php?t=99999 . Certainly from a thermal point of view these controllers can handle a lot more, but I don't know what else might fail.

@jasonbrown467

3 жыл бұрын

@@EverythingEbikeChannel you mean to go above 100 amps or what ever its set to?

@EverythingEbikeChannel

3 жыл бұрын

@@jasonbrown467 Correct. I've never tried it but I believe it's possible.

When I connect the controller to the program only "TX" flashes and system status says "Power up no finished-lack voltage" why does it happen? Controller is powered by 48v supply

@crazyexperiments4815

3 жыл бұрын

And when connecting the display it shows the actual voltage

@EverythingEbikeChannel

3 жыл бұрын

The lack voltage setting needs to be lowered in the software. If it's above 48, the controller thinks that the battery is drained as it's reading a lower value than what it's expecting. This controller will work just fine with 48v so just change it to 40v or so

@crazyexperiments4815

3 жыл бұрын

@@EverythingEbikeChannel it wasn't that I hadn't disconnected the 3pin communication plug to the display. Now it will run a hall angle test but the wheel doesn't turn and it doesn't draw any current, I've tried with test current 10-20a but it just says "in progress" until I stop it. Tried it with the bluetooth module and it worked and gave me an offset angle of 240 (qs205v3)

@EverythingEbikeChannel

3 жыл бұрын

@@crazyexperiments4815 I've no idea what each motor's hall angle is mean to be, but if it says it did the test successfully and spins with the throttle then it's probably fine

@crazyexperiments4815

3 жыл бұрын

@@EverythingEbikeChannel yeah now I got it to do the test on pc but it keeps giving me "test fail3" and with 20a test current

How long till next vid pal

@EverythingEbikeChannel

4 жыл бұрын

probably this weekend or early next week

my supplier is convincing me that the proper controller for a 72v 8kw bike is 80a sabvoton. I asked for 150v and he says it will have a higher peak power with the 80a model. does this make any sense? my understanding is that would only produce 5700watts... so why the hell have an 8kw motor? im about to call bullshit

@EverythingEbikeChannel

2 жыл бұрын

Do you mean 150A, I don't think they make a 150v model. 80a is way too low and gives about 5700w as you said. My one is the 150A but I'm pushing 160A as my battery is only 52v so yes, you don't want the 80a one!

@user-sq2ci9bi5l

2 жыл бұрын

@@EverythingEbikeChannel yeah he claims that at 80a 5700w is what the bike can constantly put out but it can spike up to 200a for short bursts and put out 14400w at maximum. He says this will give me higher peak power and longer battery life/ won't burn up the bike. Idk dude I think I may just throw a 100/150a on her

@EverythingEbikeChannel

2 жыл бұрын

Depends what the battery can supply. Perhaps that can only deliver 80a continuous? Even so, 5700W is enough to get a good pull but with a 150a one you can either tune it down to 80a or leave it on 150 if the battery can handle it.

i got mines and its dead on arrival. its saying my motor temp is 4585C lol

@EverythingEbikeChannel

3 жыл бұрын

Have you checked it's not a motor issue? Also you can disable the setting to bypass that if you like. I'm having some trouble with mine at the moment tbh, not delivering the power it should do.

@DasSigma660

3 жыл бұрын

@@EverythingEbikeChannel how do you bypass the errors? I still get the error even when the motor is disconnected (hall error and high temp). It shows up immediately as soon as I turn on the ignition and display.

whats up ,im waching and thinking to myself i must have the shittyest luck or god really wants me to learn(I LEARN BEST THRU TRIAL N ERA)I chould not hook up to the bike via bluetooth nor cableso hallmoto tells me i dont have to run a hall test note as far as the ebike was ready to go it turned on no troubble codes on display twist throttle and it wanted to go ..the bluetooth keped saying lack of voltage and stated stuck.. data cable comp said the usb on controler not working windows...all just fustrating so my stufed my little yorkie( who thinks shes a pitbull)in her riding bag and we proceeded to go for our first ride everything was going fine for 15 miles then the batt dropped dramatically got to about one fourth of batt life then bucked rted lights saying hall err...then smoke lots of it.be carfull with those leaf batt i think that was part of the problem with me.well i had the mxus 3k turbo when i bought the frame motor.frame had dnm uni shock marzocchi triple drop off forks 26inch hookworm maxxis front-n-rear chrome motortcycle rims chrome spokes but reg steel spokes on front oh and some kind of puntcherproof tube.but learned i was lied to about the motor when i got it i was told it was a 12,000watt motor.i would have got it any way.so that cost 1600 dollers .that dose not inclued controler batt, all copper and acceries you are going to need. now i get to buy a new motor.put your self in my sichuation with 100amp sab 72vbatt,i bilt two kinds one with those spimo8ph 20s1p all i could fit it was set up for my 72v 20s 13p lg hg218650 cells( i assumed thay were ballanced haha on me)it will be ready for new motor.that battery cost 870 for batt,160bms,nickel, k tape ,72v i like to use 4gauge or more for power. and use a 100amp fuse if you have a 100amp controler there is a lot off littlte thingsyou need it ads up and you need to enjoy the biuld..anyway thanks for the info and making it possable to bounce questions around.good luck with yourbike you are doing a grate job sorry for the typos, greatings L.I.N.Y. D,meyer

@EverythingEbikeChannel

3 жыл бұрын

Damn! So did the hall calibration not go successfully, is that why it blew up?

Devin Druid?

@EverythingEbikeChannel

3 жыл бұрын

We're secretly brothers lol 😜

No tenias eata problema? kzread.info/dash/bejne/dIObmK17lKWvddY.html

U got a email?? I need help please

@EverythingEbikeChannel

3 жыл бұрын

Yes, it's on the 'About' section of my channel page.

why paying so much extra for a big Sabvoton 72150, a cheaper kelly with 5-8kW is enough on this China frame. Maybe you could have bought a better fork or Frame.

@EverythingEbikeChannel

3 жыл бұрын

Really? I thought they were more high end - I guess I've only seen people using sabvotons so I guess I knew what they would be like.

@TBRambo2

3 жыл бұрын

No Sabvoton is higher quality. I would ride this frame and brakes over 5kW, too dangerous and of course no offroad riding. Priority is always on safety if the money makes a cut, not power.

@EverythingEbikeChannel

3 жыл бұрын

@@TBRambo2 Yep I don't plan to do offroading and I'm sure I'd be too worried about scratching the paintwork or breaking something anyway😂

@TBRambo2

3 жыл бұрын

@Forbidden Tut sinewave is just how you power a motor, there are controllers like a sabvoton which can do that, some other controllers only can produce square wave. Google BLDC motors and you will understand. (Wikipedia)

I need some help mate can I get ur email?