sweet radio for sure thanks drainman - they are right you are the best

In order to hear the speaker louder is to pop the radio open, take the glue off holding the speaker, drill tiny holes around the speaker housing, mount the speaker the other way around, secure it with similar type glue or just tape it down and done.

@CraftySmurf35

2 жыл бұрын

Is there anything that can be done about the speaker sound without drilling ?

@Bisdak.3475

2 жыл бұрын

@@CraftySmurf35 if you dont drill tiny holes after you turn the speaker around then the sound will be worst than before.

@CraftySmurf35

2 жыл бұрын

@@Bisdak.3475 Damn. That's a turn off if it comes from the factory like that. I just want to fly.

I got the tlite and the tpro. The tpro is my main rig nowadays. I set all my quads up the exact same so I don't need to deal with different models. Just turn the radio on, plug in a battery it binds and I fly. Easy. Still use the tx16 for fixed wing and my old croc 7

@kjsj2304

2 жыл бұрын

Is Jumper T pro performing good

Simply the best

nice video, thanks for sharing! i'd like to get one but i'm using the telemetry to display gps coordinates on my tx16s, is there a widget to do it with this radio?

Lol i heard something when you turned it on but you're face said it all lol,I'm digging this radio i need something up to date that i can run the newer sgiff not half to reflash and downgrade the firmware

hello, can you please make a video of the betafpv radio lite 3 pro and for example the betafpv meteor 75 pro or the cetus x and then connect them together. I can't figure it out I find it quite difficult. thank you in advance.

Please tell me how to bind the literadio 3 pro to meteor 75

I agree he is the best

Do you know if you can use the Frsky D8 potocols?

Should I upgrade to this from my lite radio 2se elrs?

Looking for a controller to work with my flywoo cinerace 20. Have dji goggles but having a hard time binding everything together. I'm a bit inexperienced in fpv, any info will be appreciated.

✌️Hey what's up i met you in Jacksonville at the Hotel (bando) the guy who left flying analog well i tried yall had. It locked down prdtty good anyways have you tried the Flywoo Firefly Baby Nano 1s FR. Omg

Is there anything that can be done about the speaker sound ?

Newbie question, could this radio be easily linked and used with dji air unit directly?

How do you bind it?

Are the sticks removable?

:) you the best

Cool video. Please do a series on edge tx and elrs drain man! I had a jumper t pro and after 2 or 3 months the gimbals went kind of crazy with jitter. It was so bad the radio couldn't be used. Rdq let me return it after sending videos. Rdq is awsome. I now have the radiomaster zorro with edge tx. I actually like it more then the jumper. I would be also interested in how this radio holds up over time. One thing the zorro has over this radio is you can buy parts like upgraded gimbals. The only down side with the zorro is the Nano bay small batteries. I wish it took 2 18650s or a 2s batty. You can hook a additional 2s too it though which I'm gonna do. I might pick up one of these betafpv radios down the road. Thank for the review bro!

@MrDehicka

2 жыл бұрын

All at once? Jumper has hall gimbals, that's really strange they went bad.

Yo im a complete noob guys, i fly sims but took the plunge and got me a BETAFPV Lite Radio 3 Pro and the Meteor65 Pro. The drone wasnt configured properly by the company who makes these as when i first plugged it into betaflight i got a warning telling me my motors are disabled and i needed to apply the DSHOT350 setting in motors myself lol. How on earth do i bind this controller to my drone?? Where do i do it guys its really winding me up and to top it off im having Internet problems so cannot update the controller using opentx companion and I keep getting an error telling Failed to flash or some nonsense, its apparently my cables, ive installed the vcom drivers as instructed by some other yputube dude and the error persists, all i wanna do is update the drone and controller to its latest firmware and bind it and fly it lol any tips tricks advice etc please let me know 🙃

Anyone know how to update edgetx on this?

Does these Betafpv ELRS radios bind only with Betafpv Rxs or they are capable of binding with all ELRS Rxs available across the RC Hobby

@DoktrDub

2 жыл бұрын

They can bind all, ELRS is compatible across the board in general.

I've had this radio for like a year and never got it bound to anything, can't successfully flash any firmware, and it won't charge without turning on. Also bought an XJT D8 module for it, that won't bind or even power on. Not Is my defective or what? I'm not a noob and have set up many other radios in my collection, but this one is very disappointing.

Thats not bad 👍🏽💯👍🏽

How do I use this with spectrum

@calcifiedbonecollector3222

2 жыл бұрын

😂😂😂🤦🏼‍♂️

@josediaz6246

2 жыл бұрын

@@calcifiedbonecollector3222 hilarious

@ricklafrance6050

Жыл бұрын

Any idea how to reset betafpv lite radio 3 pro?