Just had to say thank you for explaining ELRS in terms us beginners can understand, great job with your video, shared with many of my military retired buddies who fly.. Well I am still crashing more than flying, but having fun as a new drone hobbiest at 66 year old😀 Thanks for your help

you saved me from another few days of troubleshooting. Liked and subbed. Thanks!

Love your content! You've taught me a lot, and also how to bind my elrs receiver and how to switch auto from 4s to 6s. Thank you sir! Your content is great! Keep on!

Was suppose to be $20.00, not $9.99., not sure what I did. Your video was worth every penny to me, saved me hours of frustrations and my whoop is in the air.. .. So here the other $9.99👍 Great Job, can't imagine how many hours is put into putting a definitive ELRS video like that. I AM SUBSCRIBED NOW….

@DrainManFPV

7 ай бұрын

Awesome! Thank you so much! Happy it's helped!

What up Drainman !!!! I love you dude ...your vids are so good ....i love the character you are ...your info is so helpfull ...and your speacking is so clear and understanding vs some out there lol ....peace

thank you!!what is that sodering irion that you are using

Thank you. Right to the point.

A must have tool for expresslrs 🤙

Thank you the com port was the trick

thank you m8, saved my RX from been thrown away=)

@user-iv4nx5zv3j

3 ай бұрын

😁😁 the same story))

Yur the best bro!!!

One thing i was curious about tx and rx when i built my first quad, for anyone starting out (T = TRANSMIT) (R = RECEIVE) TX1 goes to RX1, TX2 goes to RX2, basically transmitting and receiving signals between devices, positive and negative are basic just beware of the devices required voltage/ amp draw from the bec/ voltage regulator some require specific voltages 5v not full battery voltage hope this helps someone.

You saved me, bro!!!!

Hii I’m having trouble binding a radiomaster ranger and er8rx can u make a video on that please

Thx

are you planning on doing a Vanny style pro review?

I only buy elrs Rado master rp3 receivers with diversity antennas. On my newest build I have an antenna on the front and the back of my quad. You'll probably need to order two 90mm antennas cuz it comes with two 65mm antennas

Quick question...will a my betafpv lite radio 2se elrs be able to be in bricked? I tried to upgrade the firmware to 3.0 and now the TX won't even power on or charge...it will only turn on in firmware flash mode.🤔🤷🏻‍♂️

Hey guys, I have the Jumper T pro with elrs external module and elrs receiver. The receiver has a solid green light when I start in a cold place. I was in the mountains and the solid green light wouldn't go away. After I come to higher temperatures, the receiver starts normally. I tried keeping it in the freezer as well and sure enough, solid green light. Couldn't find anyone else online with a similar issue. Any idea what this could be? Pressing the boot button doesn't work when the green light is solid.

Hello, i got the Meteor 75 pro brand new and accidentally flashed a TX firmware on my RX.. since then Wifi connection is not working and unfortunatelly its an AIO SPI Receiver... What can i do?

You need a third hand to hold the spring pins on the pads and click flash on your mouse.

Hey drainman quick question: if I wanted to use the 915 mhz geprc rx with a radiomaster T12(2.4ghz), would I need to use a module? Thanks anyone..

What if its a PWM recever that cant connect to Betaflight?

When I hold down the bootloader button and plug the usb into my quad i do not get any lights on the rx...

@dincelcbr

7 күн бұрын

I have a similar issue after I tried updating elrs firmware on my Foxeer receiver. I have no light now. I couldn't find any video explaining this issue. Everybody tells about bricked receivers however mine does not light up. Neither I plug in USB nor plug the battery. Even I tried pressing the boot button. Nothing changed. Foxeer sent me the new one. It worked when I connect it to FC but after I tried updating with betaflight pass through it stucked at 67% and no more light. Led on the receiver is off all the time like the previous 😮

Hi, I have a problem with my connection. When i power on the aio board with USB the receiver connects, but when i put a lipo it does not the light is solid. I found a way to power on with the USB cable and then put a lipo and it works but it is not usable because you know every time before flight to power with a USB and then lipo is absurd ............. So do you know how to fix that? 10x gear - T-motor tron 80 hd whoop, Beta fpv ELRS nano rx and Radiomaster boxer

Tu eres de panama bro

Hey here's a weird one I bet you can't solve?my new flywoo flylens 85 ELRS v3 built in Rx doesn't go into bind mode(double flashing light)it's stays on blinking then after 60 sec goes into WiFi mode as per normal,ive tryed the battery in/out 3 times but does not work as the light isn't on bind mode,this is a new model never had a firmware update and is untouched,i don't really want to use a binding phrase as all my other models don't have one. Any ideas?

@whalecoooter

5 ай бұрын

same problem with a crux35 i just recently bought. seems as if im gonna have to go the flashing and binding route really hating it always being something new but im finding thats this hobbys dying point, if your not smart enough to work certain parts or with pc's pretty much fucked. sad cause the hobby is very fun and rewarding when you are flying, also pretty shitty we arent far enough you cant plug n its automatically paired or bound or simple one button. crazy you have to watch 5 videos on something and still be lost yk.

@ruslanberkuta2619

2 ай бұрын

Same problem! @DrainManFPV please help!

Heeelllpppp!!!!! My controller is connected with the drone but the drone not with the controller(the binding lamp is still flashing) and there is no movement in betaflight, have anyone an idea plssssss😭😭😭

Man, the intro never gets old.

for some reason elrs configurator wont load just a white page anyone know?

Time to make the jump over to ELRS soon, means leaving my trusty crossfire!! Bah bah sheep...

I have RadioMaster EP2 2.4GHz receiver. RX, can’t flash it because ExpressLRS doesn’t list it in device, what can you do then .

@manski209

7 ай бұрын

Flash it with the Diy 2.4ghz version, it should work.

@kennykobi

7 ай бұрын

It does do your selecting the radio master nano tx its there I have it.

@dondupuis4007

7 ай бұрын

@@kennykobi Isn't the receiver an RX, not a TX?

Hello, I updated my generic ESP8285 2.4Ghz receiver and my Jumper TPRO radio, I receive the message that the radio connected, but the receiver light keeps blinking 3x, I can't get the solid light. The only command that works via the radio is to turn on the receiver's WiFi. Does anyone know how to solve it? The tx-rx, rx-tx wires. Solid light 😭

I bet the biggest issue has been people having leaving telemetry on. Otherwise ive has okay luck. And needed a starter kit 3 working quads is enough for me to keep up with. Otherwise i wont live

@dondupuis4007

7 ай бұрын

Not sure what you are saying about leaving telemetry on, insaw where Joshua Bardwell is always pushing to leave it on? And thank for tip earlier to select the nano receiver in place of the RadioMaster EP2 2.4 MHz, which is not list.

Hey I'm building a budget racing drone please review it please. Speedybee f405 V3 stack GT2205 2300kv motor 5inch triblade props 2200mah 3s lipo Zmr250mm

Elrs is just a pain , keep it simple like xfire