Don’t forget to click like 🙏🏽

I love a duo tec fitted hundreds as an apprentice

@Heatking

9 ай бұрын

Bomb proof boilers they are mate 💪🏼

Love the new intro pal

@Heatking

9 ай бұрын

Cheers mate. I think it needed making shorter 🫶🏽

Nice, keep the boiler breakdown vids coming. I’m sure the apprentices will appreciate it.

@Heatking

9 ай бұрын

Thank you matey 🫶🏽🫶🏽

Wirquin that’s why mate get a fluid master for easy future maintenance in there 👍but viva gear can’t go wrong 👌

@Heatking

9 ай бұрын

🫶🏽🫶🏽🫶🏽

Nice one Dan another well detailed video🎉

@Heatking

6 ай бұрын

Thank you! Hope you enjoyed it mate.

I've always removed the divvy motor to remove the plate. Didn't know they could come out the right hand side

@Heatking

9 ай бұрын

Yes mate, handy to know 🫶🏽

Good video mate. I hate back to wall toilets they can be a ball ache. 👍

@Heatking

9 ай бұрын

Cheers mate. Yeh they are a bloody pain to do anything with 😩

We all hate back to the wall toilets🤣 never a simple job

@Heatking

9 ай бұрын

Haha why did they even invent them 😩

@jeromeroddy4931

9 ай бұрын

To piss plumbers off !

@Heatking

9 ай бұрын

@@jeromeroddy4931 😂😂😂

Nice mix there mate👍👍. Nice to see stuff getting repaired. Keep em coming.

@Heatking

9 ай бұрын

Thanks Paul! Glad you liked it! 🫶🏽

Great video there Dan, nice repairs in each case, you are very dedicated indeed, credit to you! 😊👍

@Heatking

9 ай бұрын

Thanks mate. The money does help ;) haha 🫶🏽

Nice one Dan 👍🏻 (Those bloody toilets) 🫣

@Heatking

9 ай бұрын

Cheers buddy. Haha painful they are!

Nothing wrong with plumbers mate , it holds the doughnut and gives you extra seal works very well with close couple toilets , I load on both sides , never had a leak ..

Duotec or the potterton promax are my favourite boilers. Nice vid as always mate

@Heatking

9 ай бұрын

Thanks Colin, yes they’re bomb proof them two 🥰

Mate toilets are nightmares 😂 i give all my toilet jobs to Josh 😂

@Heatking

9 ай бұрын

😂😂😂poor Josh! Cheers for the comment mate 🫶🏽

Some great tips there mate, to be fair you did your best repairing that cistern the first time just unfortunate that is 👍

@Heatking

9 ай бұрын

Thank you mate. Yeh always try cheapest option for the customer first 🫶🏽

i asked the same question anout the whole in the back of the cistern today! Apparently its to help with condensation and air flow

@Heatking

9 ай бұрын

Wonder if it actually does work!

Just change the wirquin seal saves all that aggro 5 min job.

@Heatking

9 ай бұрын

You are right but I unfortunately didn’t have any :(

Another good un mr 🎉 that basement looks well rank and dodgy 5:12 rather you than me 😮

@Heatking

9 ай бұрын

Thank you mate 🫶🏽🫶🏽

Nice to see a professional at work, just wondering if my plumber did a good job on my water tank. He said I don’t need an overflow pipe with my water tank. He swapped it out and said the new valves that are fitted you don’t need overflow pipe. Is that true??

@Heatking

9 ай бұрын

I’m not sure without seeing it mate. Water tank on a toilet do you mean? If so, yes he’s right :)

Another good mix of jobs Dan. Lucky those bolts on the toilet weren't rusted up 😊 difficult enough on a normal cc let alone a back to the wall one.

@Heatking

9 ай бұрын

Thanks mate. And yeh I got lucky! Haha. First time for everything ;)

@london_roubenl

7 ай бұрын

Brilliant upload, thanks for your time, I've never really had a problem with rusted bolts that a bi-metal blade couldn't reach, but maybe I've just been lucky this far !!!

I believe in some cases that debris is born in the plate. Lack of inhibitor I would say.

Toilets i walk away from you can keep them jobs thanks

@Heatking

8 ай бұрын

Don’t blame you mate!

👍 😮smile😊

@Heatking

9 ай бұрын

Haha cheers Paul 😄😄😄😄😄😄

👍

@Heatking

9 ай бұрын

Cheers Derek 🫶🏽😂

Great video 👍👌 The red thing on the ball valve are for low pressure 😁

@Heatking

9 ай бұрын

Thank you pal. 🫶🏽🫶🏽

@Heatking

9 ай бұрын

Also I was pointing at the cut out in the cistern haha not the red orifis 😂😂

@AlexRocks24-7

9 ай бұрын

​@@Heatkingwas chatting with the Mrs at the same time 🙅🙅🙅 I think is for the water feed comes out of the wall 🤔❓ I.

@Heatking

9 ай бұрын

@@AlexRocks24-7 not sure mate but you could be right! 🫶🏽

@leepickett3655

9 ай бұрын

❤

Been self employed for 2 years and never had a call back. Hoping it continues for a while

@Heatking

9 ай бұрын

This one was featured in a previous video where I suspected I’d end up back 😩, hope you don’t get any though mate 😂

@mdocko2285

9 ай бұрын

No one likes a smart arse Steve 😂

@Purebeltersteve

9 ай бұрын

Yeah seen your last video with the cracks. I had one similar and used abit of ct1 inside cistern and its been ok for 6 months 😂

@Heatking

9 ай бұрын

@@Purebeltersteve maybe I should have used Ct1 😩😂😂

That recall wasnt really your fault if it was cracked. You deserve the like just for using stainless screws. My pet hate is cheap wood screws on a pan. 😂

@Heatking

9 ай бұрын

Haha. Cheers mate! Got to use stainless, I’ll end up being the one going back haha

Another question Dan been on holiday and haven’t been able to watch the craic podcast, there haven’t any new uploads on the podcast app i use, have these been stopped

@Heatking

9 ай бұрын

Luke controls that side of things. But we both take it in turns editing the lives before uploading. Hopefully be a new one out soon! 🫶🏽

Good varied content on this episode mate, just out of curiosity, what hrs do you work weekly as a self employed lad, I'm on the books, 8-4 hours generally

@Heatking

9 ай бұрын

Thanks mate, and I do about 32 hours a week. Mostly on the school run, but have a couple of days I work later. 🫶🏽

Surprised something as hefty as the exchanger is only held be two screws 13:49

@Heatking

9 ай бұрын

It’s the hot water heat exchanger this, the main one is above :) that’s held in with a bit more haha

@wolvolad25

9 ай бұрын

@@Heatking oh cool 😎

Wouyyiu be able to share the charges for those jobs plz

@Heatking

9 ай бұрын

These jobs where filmed before you asked on the last one mate. From November I’ll start sharing the prices

where do yo get your plastic washers from ?

@Heatking

8 ай бұрын

Sorry mate. Which plastic washers?

@robcoppin5699

8 ай бұрын

The ones you used to fix the cistern back to the wall with

@Heatking

8 ай бұрын

@@robcoppin5699 arrr. Yes. They’re out on close coupled toilet fixing kits mate.

Bloody recalls!. I hate them, especially when they’re someone else’s recall!….

@Heatking

9 ай бұрын

Haha oh mate. You’re spot on there :(

Oh by the way guys does anyone know what the cut out is at the back of the cistern ………let me down once again Daniel 😢

@Heatking

9 ай бұрын

I asked that!! Haha.

@leepickett3655

9 ай бұрын

Haha no way you’ve just asked the question 🤭 oops sorry

@leepickett3655

9 ай бұрын

☺️ cheers matey

@Heatking

9 ай бұрын

@@leepickett3655 😂😂😂 I did nearly forget.

@leepickett3655

9 ай бұрын

😂 that’s it just forget about me ! All this talk and know one’s gonna answer you anyway haha

It stinks 😂😂😂😂

@Heatking

9 ай бұрын

😂😂😂😂😂

Jump on BOXT pal You gave it a go Not for you mate

@Heatking

8 ай бұрын

Do you know what boxt are paying?

He skipping mate show a proper video

@Heatking

9 ай бұрын

What do you mean mate?

@RANDEEP685

9 ай бұрын

Where are you based mate?

@Heatking

9 ай бұрын

@@RANDEEP685 Chorley mate

@RANDEEP685

9 ай бұрын

Do you have a email I can get in touch with you mate?

@Heatking

9 ай бұрын

@@RANDEEP685 centralheatking@gmail.com