The lean is for real, thought I was going crazy setting up my truck, it's 7/8" lower on the front left..

dang looks good

I still like the C10 at the end of the driveway

I need this 🤟🏾🔥🔥🔥🔥🔥🔥💯💯💯

Fantastic, show! São Paulo Brazil. 🤙👏👏🤙

Have you guys considered doing a more in detail video of taking off and putting on the Aldan coils and hardware.. thank yiu

would these coilovers work with lowering control arms and stock spindles? say I want to use 3" lowering control arms and want to install these coilovers so I have adjustability from 3" drop (coilovers at 0 drop) down to a 5" drop (coilovers set at 2" drop)?

Just ordered a set for my Tahoe

What does the rear have for the drop? I have a 96 2 door, I used crown 6" flip and shocks and it road like CRAP!

Awesome content 👍 what are the wheels and tires specs

How long does shipping takes I’m about to get this set for my obs

Which damper gives the most supple and compliant ride quality? Alden single adjustable or QA1 single adjustable?

Price wise are they comparable to the QA 1 which Ive always used BTW

Can you swap the dashboard to 2001_2006?

Does it feel like the newer truck?

are the coils just for drops or are there any for raising the height. Looking at fitting 33s, but want to raise the front just a tad bit more. From the ground to the wheel well, I have 35" and 36" ( ones side has a dented out fender. Its at about 33.75 to 34 in the rear. Installing 5/1 which originally came stock on this truck. Just curious if you know which product (coilover) will give me that extra 1-2" lift.

@AZProPerformance

2 жыл бұрын

Yes, they just offer a drop, no lifting.

what color do you have on the obs

Make more videos plz 🔥🔥🔥🔥🔥

Sucks y’all couldn’t do a promotional discount!! I am up in the air between viking and QA1… also CPP has them for $470 right now!

Does this work or add any benefit to OBS that are either leveled or lifted? Looking to maximize right comfort on a stock Z71 that I may level or lift a bit.

@AZProPerformance

3 жыл бұрын

4wd's are torsion, so unfortunately won't be applicable here.

Reference this coil springs brother please i from Colombia but I buy for amazon or eBay help me

Nice video. How are three coil overs working for you? Would you recommend?

@AZProPerformance

3 жыл бұрын

I love them and very happy with the ride. We have done multiple sets on customers trucks too, and have gotten great feedback.

@bigboygames8800

2 жыл бұрын

kzread.info/dash/bejne/anuh0JKadpnUXdI.html

@JeLifeCoach

Жыл бұрын

@@AZProPerformance how comfortable? Which damper gives the most supple ride quality? Alden, qa1, or ridetech?

can this be done to a truck with completely stock suspension or would there be more involved?

@AZProPerformance

3 жыл бұрын

Yes, it can be done to a stock truck.

Do u have drop spindles also or they factory

@nonameisthename138

3 жыл бұрын

He said before the install it has two inch drop spindles

Me gustaría saber dónde podría encontrar esa persona que cambió el motor de esa camioneta gris para que pudiera haser lo mismo con la mia

What size wheels

What upper control arm would I have to run with my 93 blazer ? It’s not the s10 it’s the full size

@AZProPerformance

2 жыл бұрын

Not sure, as they don't make them for the 4wd Blazers / Tahoes.

Does anyone know what brake calipers he's using? They appear to be a dual piston, and that's what I'm currently looking for

@AZProPerformance

3 жыл бұрын

It's our front big brake kit. Uses Corvette C5 calipers. azproperformance.com/products/pro-performance-14-front-big-brake-kit-88-98-gm-truck-suv?_pos=1&_sid=0da6c6015&_ss=r

Sic blazer

I currently have 2" drop spindles and 2" drop springs and I can barely drive the truck , it horrible it bottoms out and has cut my tires up . If I added these in place of my drop springs do you think this will help ? And is it possible to add spring risers to these , if I needed to go up a little ?

@AZProPerformance

2 жыл бұрын

These coil overs can be adjusted from a 0-2" drop, so no need for a spring spacer.

@willsnider4412

2 жыл бұрын

Thank you for responding to my question . I just ordered them from you guys . I'm excited to install them and hopefully this will correct the problem so I can drive without bottoming out so bad .

@willsnider4412

2 жыл бұрын

Hey I ordered this setup from y'all and it's not like the one's in the video , I only have adjustment collars there aren't any locking collars like in the video , also it didn't come with a spanner wrench so I can adjust them . What do I do ? I can't install them until I have these parts that showed in your video . I'm not trying to complain . I'm just unsure how to get this stuff

@willsnider4412

2 жыл бұрын

I looked on eBay and was able to find the spanner wrench for $ 40 . But it should have been in the kit . And I can't even find the adjustment collars , I don't know what I'm going to do , I just paid $638 . For these things from you guys and can't even install them

@willsnider4412

2 жыл бұрын

I meant to say locking collars , not adjustment

Do you have any issues with the wheels hitting the inner upper fender when hitting bumps or potholes?

@AZProPerformance

2 жыл бұрын

No sir. The wheels are tucked enough to not have that issue, but not all wheels tuck the same. Check out these React spindles if you need to bring your wheels in, as they dont widen track width like other spindles on the market. azproperformance.com/products/react-2-modular-drop-spindles-88-98-c1500-8898-001?_pos=28&_sid=ddf6761f1&_ss=r

Clean ass tahoe

are they factory or drop spindles?

@AZProPerformance

3 жыл бұрын

Drop spindles.

I’m building a 96 yukon 2door 2wd and want to improve handling… would this be the way to go ?

@AZProPerformance

3 жыл бұрын

Yes sir! I love the way it rides and handles. azproperformance.com/products/aldan-front-coilover-kit-88-98-gm-truck-suv-300132?_pos=7&_sid=af43d28b2&_ss=r

Just ordered

@robertthibodeaux4435

3 жыл бұрын

You get them on?

@DrivenbyGears

3 жыл бұрын

@@robertthibodeaux4435 yes I did

@felipec4500

3 жыл бұрын

How’s the ride ?

@DrivenbyGears

3 жыл бұрын

@@felipec4500 amazing

@g.j.p3291

3 жыл бұрын

Is it worth to do ? Way better handling ?

I want coilover but have 4x4

i wont to go up not lowered lol

Why do they call that year run OBS???

@DrivenbyGears

4 жыл бұрын

old body style

@robertthibodeaux4435

3 жыл бұрын

1988 to 1998 Chevy Truck = OBS

I went to the website that kit was 520.00? Not 495.00...

@mc1992

3 жыл бұрын

😳😳😳😳

@nonameisthename138

3 жыл бұрын

Ok, so it was TWENTY FIVE more dollars!! That's not going to break you is it??🤷‍♂️🤣🤣🤦‍♂️

@bigharrykochenbauls4567

3 жыл бұрын

Don't forget the tax..

I need link Amazon

@AZProPerformance

3 жыл бұрын

azproperformance.com/products/aldan-front-coilover-kit-88-98-gm-truck-suv-300132?_pos=1&_sid=2331478b2&_ss=r

Hola soy un mexicano que me gustaría que le hicieran el cambio de motor como el que le puso a esa camioneta gris tengo una igual estoy dispuesto a pagar

@angelmendez2946

3 жыл бұрын

El no te va a contestar x q no abla español. Y si vas apagar donde sea hacen eso se llama swap creo es un motor 5.3 ls vortec aquí por barato bale como 5 mil dólares ese trabajo.. si no sabes hacerlo

No adjstment wrench Hardware too short Not the same locking collar (split type) No marking for the valved ajustment. Just numbers on the dial. Slightly bummed right now.

@salvadorgonzalezzz

Жыл бұрын

Did you buy off Amazon?

What’s the total drop with the coilover? More than a 2 in drop or 2 on the dot ?

@AZProPerformance

2 жыл бұрын

We were able to get 3" of drop from it, and I have daily drove it like that for a while now. All is good!

@anthonysalcido8700

2 жыл бұрын

@@AZProPerformance so In total with the 2 in drop spindle your at about a 5 In drop up front correct

@AZProPerformance

2 жыл бұрын

@@anthonysalcido8700 Correct. Technically I am 1.25" lower than I was with a 2" spring, so safe to say I am riding at a 5.25" total drop up front.

@anthonysalcido8700

2 жыл бұрын

@@AZProPerformance awesome got my obs at a 5 in drop 2 in spindles 3 in drop springs but if I keep can keep my obs at a 5” with coilovers instead of the spring I’m all for it thanks should he ordering soon 🙌🏽

@scottsoto2765

2 жыл бұрын

Question, I have 5" inch drop, 3 inch coils 2" inch spindles .by using coilovers can I lift the front end to.