940nm infrared LEDs are virtually invisible to the naked eye. 850nm LED produces a visible red glow but will illuminate stronger than a 940nm LED of equal power.
Жүктеу.....
Пікірлер: 73
@billybutcher99125 жыл бұрын
This answered my question about "visible" IR light. Thanks for posting..!!
@wibble19994 жыл бұрын
fantastic. Massively helpful. thank you my friend
@mickcarson85044 жыл бұрын
The 940nm has a more evenly distributed light and yes, it is also brighter than the 850nm. I think you should check your video and see which is brighter. I would rather have the 940nm IR in my cameras than the 850nm to keep them away and hidden from preying night owls (vandals, intruders). The 940nm doesn't attract flying insects than the 850nm which pull insects towards the camera like magnets, resulting in constant fake alarm and sleepless nights.
@cahoc99
Жыл бұрын
hi what kind of camera to see vision night ??
@closed-channel
8 ай бұрын
Yes same what camera are you using? Mine almost doesn't pick up the 940nm
@koningklootzak7788
6 ай бұрын
Incorrect. 850nm is brighter.
@diodedoode
6 ай бұрын
Hello, @cahoc99. A night vision camera has no infrared filter inside the camera lens, whereas normal cameras like on an iPhone has a filter so the image looks the same as the naked eye.
@dkim92386 жыл бұрын
That answered my question "what's the difference between 850nm v 940nm?". Thanks!
@Heywoodthepeckerwood
2 жыл бұрын
About 90nm
@ludr22255 жыл бұрын
where did you buy that 940 led?
@lifewithbreion13924 жыл бұрын
Great vid... needed it, thanks
@samsen2015 жыл бұрын
Good comparison. A question. Can you condense the beam of these chips, using a lens?
@usbtower4358
5 жыл бұрын
Yes, it could be done
@mikeshipley6158 Жыл бұрын
Thank you. Your video is very informative. I'm definitely buying a 940nm based on your video.
@engjds
2 ай бұрын
Err....he told you the 850nm is brighter, just the camera adjusted exposure!
@litterlyanything79152 жыл бұрын
this video was very helpful thanks
@GoWokeGoBroke20232 жыл бұрын
Excellent review
@androidera18587 жыл бұрын
thank you.
@sergiosecreto3189 Жыл бұрын
hello what is the camera modell you tested them? I think it also depends a lot on the camera. or am I wrong? I have already seen cameras that could see perfectly the 940 too but of course for the human eyes it was invisible.
@jpdesroc Жыл бұрын
What is the part number of your 940nm flood bulb ? 120vac uses ? And who sells it ? Thanks !
@fernandocalabro862 жыл бұрын
Good evening. Sorry for the inconvenience. I ask you a question. I need a powerful infrared led system so that when placing it next to a written plate, and I need that when someone takes a photo (during the day) of that plate, the photo appears "burned" or at least it is not understood what it has written. Is there any led with which I can achieve that? What do you recommend? The important thing is the clarification that is that it has to work also during the day (not only at night). Thank you very much and sorry for the inconvenience.
@hamitinan6422
2 жыл бұрын
Light the plate with and shoot a film on the plate. The IR lights from the cameras will be stuck in the filter and will be invisible ;)
@kasperasperdgb27235 жыл бұрын
can you please make demonstration with 730 nm or 740nm? thanks
@federiko83977 жыл бұрын
Hi USBTower, Thank you very much for this video. I tryed to build a infrared camera and I bought a 940nm 18 led board but I can't see nothing with my camera, phone or webcam. In your video the bulb works very well and you have a "white" contrast, not Violet or blue. Please can you help me for to buy your bulb? Thanks
@usbtower5499
7 жыл бұрын
Sorry for the delay answering. When your camera is in the night vision mode, you should not see any color. The fact that you mention blue or violet, tells me that your camera is probubly in the day time mode with IR filter on, so the problem might not be with your illumination but rather with the camera.
@digibluh
6 жыл бұрын
they probably have an IR Filter so you would see nothing.....
@mostafakabbaa90814 жыл бұрын
Dear If you made a 3000nm camera, could it penetrate the dirt
@alhwaity23 жыл бұрын
Thank you
@vexelite772 жыл бұрын
I appreciate the video
@260719905 жыл бұрын
Hello, can you tell me please what flashlight do you use in the video and from where can i buy one ?
@usbtower4358
5 жыл бұрын
There was no flashlight. The bulbs you see are all that has been used. They are available on eBay
@26071990
5 жыл бұрын
@@usbtower4358 ok ☺ in this case what flashlight with 940 nm bulb you reccommend?
@26071990
5 жыл бұрын
ok ☺ in this case what flashlight with 940 nm bulb you recommend?
@hamitinan64222 жыл бұрын
so so so thanks great. it worked for me a lot
@engjds2 ай бұрын
What is the power of those torches?
@matthewlewis-zw3tf5 ай бұрын
All depends on your digital sensor, what wavelength you need.
@Steve-Cross11 ай бұрын
The advantage of a 940nm IR, is that it is less visible to the naked eye. This makes it much better, especially if you need to be covert. Night Hunting etc.
@CoolShot9066 жыл бұрын
May I know the camera you use.. And if I use 50 940nm ir led,how much voltage and amp I need?thanks
@tocadisco4166
6 жыл бұрын
Ir LEds typically have a forward voltage of 1.5V, so if you want to use 50 of them connected in series, ou simply need to multiply 1.5V x 50 leds = 75 volts. The current will depend on the type of led. Small 5mm leds will require about 25mA. Instead of using theses 5mm leds, I recommend you to test some larger 3W power leds. Each one will require 700mA and 1.5 volt to work.
@CoolShot906
6 жыл бұрын
Toca Disco well,thanks!
@usbtower4358
6 жыл бұрын
I would add that the LEDs require constant current rather than constant voltage power and if you are experimenting with a regular constant voltage power supply, I would connect a small resistor in series.
@usbtower4358
6 жыл бұрын
The camera is a generic Chinese Cam from eBay. The stamp on it reads NETWORK CAMERA Model No NC223W-IR
@miguelangelsimonfernandez5498
3 жыл бұрын
@@usbtower4358 Actually they don't . They are more efficient in pulse mode and a higher voltage than nominal DC voltage. You would need a pulsing (forward ) current at a frequency higher than your camera shutter frequency. Using direct DC depletes your batteries fast.
@hippopotamusanonymous1580 Жыл бұрын
Where can I buy these bulbs?
@Manosspan17 жыл бұрын
Hello, I have tried using 20pcs of 940nm led's but there are lighting only for 1-3 meters. do you know why? how many amps and voltage do they need? thank you
@usbtower5499
7 жыл бұрын
There are many different 940nm LEDs available out there. They all have different specs. All LEDs (light emitting diodes) work on constant current rather than on constant voltage, usually you would use an appropriate constant current power supply. Unless you already familiar with the issue, you may want to Google it.
@Manosspan1
7 жыл бұрын
Thank you very much for your reply. I used a ac to dc power supply like this one www.ubbcentral.com/store/item/img-large/eu-9v-ac-dc-power-supply-adaptor-plug-pack-for-super-nintendo-snes-console-new_221797783699.jpg What characteristics should I look , in order to find 940 leds like these in the video
@usbtower5499
7 жыл бұрын
What you see in the video is a bulb, that is a complete system LEDs, power supply, heat-sink and it can be used in most light fixtures that use standard e26/27 light bulb. We sell them on eBay, Amazon and our website. Unfortunately instructions on putting one together involves more than a few lines of text.
@Ibanez7400
4 жыл бұрын
If you look up tactical flash light. You will notice you can increase the intensity by using magnifying lenses to zoom or widen the the range. However this also depends on your power output. If rated you may be able to change your circuit parallel vrs series to increase the intensity of the LED you are using.
@STAY-GOLD-VINYL6 жыл бұрын
Is it possible to make this portable?? Can u give me a run down on how I could make this portable?
@usbtower4358
6 жыл бұрын
These bulbs can be made to work with a DC power source. It would however require a different internal power supply. Doing it would require professional skills though. If you really need one I could make one for you, if you look me up on our website or e bay.
@Subgunman2 жыл бұрын
The military uses the 920 to 940 nm illuminators since it provides better lighting and it won't give your position away to those using conventional optics searching for that telltale pink glow from the 840 equipment.
@radharamanan50036 жыл бұрын
nice
@pablowin074 жыл бұрын
Which is better OSRAM OSLON - INFRARED 860nm OR INFRARED 940nm for one bisor ATN ???
@drefhill
3 ай бұрын
They are different, it depend what you want to do with them.
@imadjawad44086 ай бұрын
Great thanks
@brokenpencil572 жыл бұрын
Beware if the IR light frequency (850 or 940nm) doesn't match your camera sensor frequency you will have much less intensity (half??) resulting in significant loss of range.
@sergiosecreto3189
Жыл бұрын
so yes exactly, that's what I have written too. the big question is the sensor of the camera. but I also think it is very diffocult so decide cause only later and via testing you can see the result
@closed-channel
8 ай бұрын
@@sergiosecreto3189An idea of which camera to use for the 940nm
@Fortun.a_Major4 жыл бұрын
940 is good for invisible spy cam
@prajapatbecharbhai18433 жыл бұрын
Good
@tocadisco41666 жыл бұрын
The led was 3w or 5w? How many leds?
@usbtower4358
6 жыл бұрын
The LEDs are 3w and there were 3 of them. Both 940 and 850 nm
@artur49455 жыл бұрын
esto es una de las caracteristicas que no explican en las camaras de vigilanci que deberian de decir y no dicen
@wtfvids34725 жыл бұрын
That is strange, humans are not supposed to see 850nm in fact anything over 760... Do you know why this light can be seen?
@usbtower4358
5 жыл бұрын
If it only produced 850 we would in fact not be able to see it, but no LED is perfect, and alongside 850 it emits some light in the visible range. The 940 LEDs produce light mostly in the 940 nm range and a lot less visible light, if you load them to capacity, or overload them they too will produce some visible light, a lot less than the 850s though.
@5thDragonDreamCaster
5 жыл бұрын
The boundary between red and infrared is not a sharp cut-off. Red slowly fades into infrared as the eye's response drops off. From 700-800nm there is a transition zone called far-red which is somewhat visible, but takes on the properties the near-infrared. With your own eyes, you can see black fabrics change to red, while any black marker writing or black plastic stays black. kzread.info/dash/bejne/hKSpr7KFeMyypJc.html
@SodiumSyndicate Жыл бұрын
IR is used for stealth. It makes ZERO sense to use 850nm as it glows really well to be spotted easily.
@Fortun.a_Major4 жыл бұрын
940 nm , no glow is good then..
@StamZO6 жыл бұрын
who else was expecting a ghost?
@ZOMBIEEZ
4 жыл бұрын
u
@RynaxAlien6 жыл бұрын
With A7S or X27 you wouldn't need even IR lighting.
@NK-yx7zn2 ай бұрын
So is it a myth that we can’t see above 800nm lights ?
Пікірлер: 73
This answered my question about "visible" IR light. Thanks for posting..!!
fantastic. Massively helpful. thank you my friend
The 940nm has a more evenly distributed light and yes, it is also brighter than the 850nm. I think you should check your video and see which is brighter. I would rather have the 940nm IR in my cameras than the 850nm to keep them away and hidden from preying night owls (vandals, intruders). The 940nm doesn't attract flying insects than the 850nm which pull insects towards the camera like magnets, resulting in constant fake alarm and sleepless nights.
@cahoc99
Жыл бұрын
hi what kind of camera to see vision night ??
@closed-channel
8 ай бұрын
Yes same what camera are you using? Mine almost doesn't pick up the 940nm
@koningklootzak7788
6 ай бұрын
Incorrect. 850nm is brighter.
@diodedoode
6 ай бұрын
Hello, @cahoc99. A night vision camera has no infrared filter inside the camera lens, whereas normal cameras like on an iPhone has a filter so the image looks the same as the naked eye.
That answered my question "what's the difference between 850nm v 940nm?". Thanks!
@Heywoodthepeckerwood
2 жыл бұрын
About 90nm
where did you buy that 940 led?
Great vid... needed it, thanks
Good comparison. A question. Can you condense the beam of these chips, using a lens?
@usbtower4358
5 жыл бұрын
Yes, it could be done
Thank you. Your video is very informative. I'm definitely buying a 940nm based on your video.
@engjds
2 ай бұрын
Err....he told you the 850nm is brighter, just the camera adjusted exposure!
this video was very helpful thanks
Excellent review
thank you.
hello what is the camera modell you tested them? I think it also depends a lot on the camera. or am I wrong? I have already seen cameras that could see perfectly the 940 too but of course for the human eyes it was invisible.
What is the part number of your 940nm flood bulb ? 120vac uses ? And who sells it ? Thanks !
Good evening. Sorry for the inconvenience. I ask you a question. I need a powerful infrared led system so that when placing it next to a written plate, and I need that when someone takes a photo (during the day) of that plate, the photo appears "burned" or at least it is not understood what it has written. Is there any led with which I can achieve that? What do you recommend? The important thing is the clarification that is that it has to work also during the day (not only at night). Thank you very much and sorry for the inconvenience.
@hamitinan6422
2 жыл бұрын
Light the plate with and shoot a film on the plate. The IR lights from the cameras will be stuck in the filter and will be invisible ;)
can you please make demonstration with 730 nm or 740nm? thanks
Hi USBTower, Thank you very much for this video. I tryed to build a infrared camera and I bought a 940nm 18 led board but I can't see nothing with my camera, phone or webcam. In your video the bulb works very well and you have a "white" contrast, not Violet or blue. Please can you help me for to buy your bulb? Thanks
@usbtower5499
7 жыл бұрын
Sorry for the delay answering. When your camera is in the night vision mode, you should not see any color. The fact that you mention blue or violet, tells me that your camera is probubly in the day time mode with IR filter on, so the problem might not be with your illumination but rather with the camera.
@digibluh
6 жыл бұрын
they probably have an IR Filter so you would see nothing.....
Dear If you made a 3000nm camera, could it penetrate the dirt
Thank you
I appreciate the video
Hello, can you tell me please what flashlight do you use in the video and from where can i buy one ?
@usbtower4358
5 жыл бұрын
There was no flashlight. The bulbs you see are all that has been used. They are available on eBay
@26071990
5 жыл бұрын
@@usbtower4358 ok ☺ in this case what flashlight with 940 nm bulb you reccommend?
@26071990
5 жыл бұрын
ok ☺ in this case what flashlight with 940 nm bulb you recommend?
so so so thanks great. it worked for me a lot
What is the power of those torches?
All depends on your digital sensor, what wavelength you need.
The advantage of a 940nm IR, is that it is less visible to the naked eye. This makes it much better, especially if you need to be covert. Night Hunting etc.
May I know the camera you use.. And if I use 50 940nm ir led,how much voltage and amp I need?thanks
@tocadisco4166
6 жыл бұрын
Ir LEds typically have a forward voltage of 1.5V, so if you want to use 50 of them connected in series, ou simply need to multiply 1.5V x 50 leds = 75 volts. The current will depend on the type of led. Small 5mm leds will require about 25mA. Instead of using theses 5mm leds, I recommend you to test some larger 3W power leds. Each one will require 700mA and 1.5 volt to work.
@CoolShot906
6 жыл бұрын
Toca Disco well,thanks!
@usbtower4358
6 жыл бұрын
I would add that the LEDs require constant current rather than constant voltage power and if you are experimenting with a regular constant voltage power supply, I would connect a small resistor in series.
@usbtower4358
6 жыл бұрын
The camera is a generic Chinese Cam from eBay. The stamp on it reads NETWORK CAMERA Model No NC223W-IR
@miguelangelsimonfernandez5498
3 жыл бұрын
@@usbtower4358 Actually they don't . They are more efficient in pulse mode and a higher voltage than nominal DC voltage. You would need a pulsing (forward ) current at a frequency higher than your camera shutter frequency. Using direct DC depletes your batteries fast.
Where can I buy these bulbs?
Hello, I have tried using 20pcs of 940nm led's but there are lighting only for 1-3 meters. do you know why? how many amps and voltage do they need? thank you
@usbtower5499
7 жыл бұрын
There are many different 940nm LEDs available out there. They all have different specs. All LEDs (light emitting diodes) work on constant current rather than on constant voltage, usually you would use an appropriate constant current power supply. Unless you already familiar with the issue, you may want to Google it.
@Manosspan1
7 жыл бұрын
Thank you very much for your reply. I used a ac to dc power supply like this one www.ubbcentral.com/store/item/img-large/eu-9v-ac-dc-power-supply-adaptor-plug-pack-for-super-nintendo-snes-console-new_221797783699.jpg What characteristics should I look , in order to find 940 leds like these in the video
@usbtower5499
7 жыл бұрын
What you see in the video is a bulb, that is a complete system LEDs, power supply, heat-sink and it can be used in most light fixtures that use standard e26/27 light bulb. We sell them on eBay, Amazon and our website. Unfortunately instructions on putting one together involves more than a few lines of text.
@Ibanez7400
4 жыл бұрын
If you look up tactical flash light. You will notice you can increase the intensity by using magnifying lenses to zoom or widen the the range. However this also depends on your power output. If rated you may be able to change your circuit parallel vrs series to increase the intensity of the LED you are using.
Is it possible to make this portable?? Can u give me a run down on how I could make this portable?
@usbtower4358
6 жыл бұрын
These bulbs can be made to work with a DC power source. It would however require a different internal power supply. Doing it would require professional skills though. If you really need one I could make one for you, if you look me up on our website or e bay.
The military uses the 920 to 940 nm illuminators since it provides better lighting and it won't give your position away to those using conventional optics searching for that telltale pink glow from the 840 equipment.
nice
Which is better OSRAM OSLON - INFRARED 860nm OR INFRARED 940nm for one bisor ATN ???
@drefhill
3 ай бұрын
They are different, it depend what you want to do with them.
Great thanks
Beware if the IR light frequency (850 or 940nm) doesn't match your camera sensor frequency you will have much less intensity (half??) resulting in significant loss of range.
@sergiosecreto3189
Жыл бұрын
so yes exactly, that's what I have written too. the big question is the sensor of the camera. but I also think it is very diffocult so decide cause only later and via testing you can see the result
@closed-channel
8 ай бұрын
@@sergiosecreto3189An idea of which camera to use for the 940nm
940 is good for invisible spy cam
Good
The led was 3w or 5w? How many leds?
@usbtower4358
6 жыл бұрын
The LEDs are 3w and there were 3 of them. Both 940 and 850 nm
esto es una de las caracteristicas que no explican en las camaras de vigilanci que deberian de decir y no dicen
That is strange, humans are not supposed to see 850nm in fact anything over 760... Do you know why this light can be seen?
@usbtower4358
5 жыл бұрын
If it only produced 850 we would in fact not be able to see it, but no LED is perfect, and alongside 850 it emits some light in the visible range. The 940 LEDs produce light mostly in the 940 nm range and a lot less visible light, if you load them to capacity, or overload them they too will produce some visible light, a lot less than the 850s though.
@5thDragonDreamCaster
5 жыл бұрын
The boundary between red and infrared is not a sharp cut-off. Red slowly fades into infrared as the eye's response drops off. From 700-800nm there is a transition zone called far-red which is somewhat visible, but takes on the properties the near-infrared. With your own eyes, you can see black fabrics change to red, while any black marker writing or black plastic stays black. kzread.info/dash/bejne/hKSpr7KFeMyypJc.html
IR is used for stealth. It makes ZERO sense to use 850nm as it glows really well to be spotted easily.
940 nm , no glow is good then..
who else was expecting a ghost?
@ZOMBIEEZ
4 жыл бұрын
u
With A7S or X27 you wouldn't need even IR lighting.
So is it a myth that we can’t see above 800nm lights ?