_Five years later:_ "A six minute video?? He must have opened 15 locks!

@TheBigmobe

3 жыл бұрын

Man look that is so funny. I'm used to the new lock picking lawyer where you got to pause the video just to read the comments.

@Nebbia_affaraccimiei

3 жыл бұрын

his voice is so different!!

@ZielAmerak

2 жыл бұрын

or 600 MasterLock

2022: "This is the LockPickingLawyer and today I'm going to create a series of videos, that show cutaway locks." Later: "This is the LockPickingLawyer and today I'm going to be picking the lock on this Delorian, so that I can go back to 2015 and make a cutaway video about paracentric keyways."

@AstralS7orm

2 жыл бұрын

Why would you do that when you could decode that lock instead with a tool in no time? 😄 It's an 1983 Ford door lock...

@ragnkja

Жыл бұрын

That video turned this from a standalone video to the beginning of a series.

Your voice really has changed over the past 5 years

@Grrrisly

3 жыл бұрын

@@pepperpepperpepper nah there would be distortion

@pepperpepperpepper

3 жыл бұрын

@@Grrrisly Have you tried it? I often play YT at 1.25 speed to save time, and mostly it's not really obvious.

@iKyuubi1995

3 жыл бұрын

@@pepperpepperpepper sounds close but a bit high pitched

@фрозенхил

3 жыл бұрын

@@pepperpepperpepper woah that's actually it . holy shit

@pepperpepperpepper

3 жыл бұрын

@@фрозенхил Well, it wouldn't be the case when he shows a timer, so I don't know :)

His voice will become even cooler over the next 5 years. Trust me i can see the future.

@JoseSilveira-newhandleforYT

3 жыл бұрын

LOL!

@adamf663

3 жыл бұрын

You *are* from the future. Six years or so (3/2022 vs.12/ 2015)

@cruisemissle87

3 жыл бұрын

And still, I can only keep my patience at 1.5x or 2x playback speed with these talks

@prezzie1

3 жыл бұрын

@@cruisemissle87 ha yeah i just tried putting the speed upto 1.75x and its perfect. That's a good tip thank you.

@paulbarbat1926

2 жыл бұрын

He will speak louder and gain confidence, with this intonation I feel like he doesn't wanna wake up Mrs LPL or Kid LPL. In the future he will stop giving damns, maybe because he has an "office" with soundproof walls, or nicer neighbours, or found a recording time when noone's home

LPL, as you stated, there are a lot of lock picking instructional vids here on KZread. Yet few are made by guys that have the talent of being naturally talented teachers. Personally, I'd love to see a lockpicking series of videos starting from "this is a pick" and going through to advanced topics, made by you. You really have the natural teaching talent. I've been an instructor pilot serving as a sim instructor, line check airman and giving Initial Operating Experience qualifications to airline pilots for 20 years. Why do I mention this? I know how to spot good teachers. : )

@jim2725

4 жыл бұрын

I would love this as well. It is clear he really takes the time to show why he does things, that is great

@shader26

3 жыл бұрын

He’s positively eloquent, and VERY precise. Which is something that is severely lacking in normal discourse these days. He is a great teacher, no wasted words but fun and funny, but covers everything and makes it interesting. After watching a number of his videos now, the last months, and given his KZread name, if he is indeed a lawyer as well, he would be my first choice as a lawyer. Seems like he most likely is an excellent,,prepared and knowledgeable lawyer. As an added dividend, even if you get convicted, he can show you how to get out :-)

@AndrewTJackson

3 жыл бұрын

Very much so!! (Also, which specific models of airline planes? We have 737-800 NG sims, plus a 400 sim.)

82k views as of now. Let's see if that grows following today's reference

@notyourpapa

3 жыл бұрын

2 hours later, 90k

@Emily-un1wp

3 жыл бұрын

93k 4 hours later

@user-dl8ol2ib8h

3 жыл бұрын

94

@Emily-un1wp

3 жыл бұрын

97k 9 hours after original comment

@mizurielse

3 жыл бұрын

10 hours later, still 97k

Was sent here in a time machine from video 1248. People in 2021 talk much faster. World is changin´ man.

@PopeGoliath

3 жыл бұрын

WPMs for The Algorithm

@Farlig69

3 жыл бұрын

Yeah I had to watch this on x1.25 to understand it!!

@aihtdikh

3 жыл бұрын

I came to this video after watching another on 1.5x, the slowdown gave me whiplash. I thought I had accidentally dropped down to

Oh my gosh this was a serious "aha" moment for me. Thank you so much for showing this with the cutaway lock. You are such a fantastic teacher!

@steve24822

3 жыл бұрын

Yep, for me too. This is why you have top of keyway tentioners.

Here from 2021... are we sure this is the same guy? :) This version of LPL sounds scared to be on video! If I only we could let him know what a legend he'll become.

@ehsnils

2 жыл бұрын

I started to wonder and then I saw that this was a more than 6 year old video.

@stgram12

2 жыл бұрын

oh my god i was worried he was sick or something was troubling him, but this is great news he has achieved so much 🥺💕

This is a great illustration of defeating complex warding. Really great work, extra points for the cutaway. I've certainly re-thought my pick selection, and might just pick up a couple of deeper hooks for this purpose. Thanks for the work

@lockpickinglawyer

8 жыл бұрын

+tacitguardian Thanks -- It's always nice to hear that someone finds it useful.

I'm here because of the video he uploaded today and the only comment I have is... damn, he sounded so different back then.

@Halalslagteren

3 жыл бұрын

Try playing the video at 1.25x speed

Very informative! Was not expecting a paradigm shift when I started the video. Thank you.

@lockpickinglawyer

8 жыл бұрын

+TheMorePerfectWay Wow! That's high praise. Thank you.

That video is just fantastic. This simple idea to just cut away the have of the plug to see you self picking and learning fro it is great. Will do cut-aways from some from my euro cylinders. Very valuable info and demonstration. Thank you.

@lockpickinglawyer

8 жыл бұрын

+Potti314 thanks! Glad to hear that you think it's helpful.

@monkstandinglast

3 жыл бұрын

@@lockpickinglawyer Just come from todays vid, 5:32 not what she said. Someone had to lol great tutorial watched this one on release never commented though.

Thanks LPL! I just started this addictive and fun hobby and this is this exact explanation/ instruction I needed. I love your videos and I'm glad you're making a living off lock picking.

Some very good points, and a subject I've never seen addressed before, very good description with the cutaway plug. Thanks for taking the trouble, even us Locksmiths can learn something new. Well done.

@lockpickinglawyer

8 жыл бұрын

+Brian Hignett Thanks, I'm glad you liked it. This was something that I struggled with when I first started -- so much so that I actually PMed a couple of the more prolific KZread pickers who made instructional videos, and suggested that a video discussing how to deal with tough warding was needed. No one stepped up to fill the gap, so I did. My channel doesn't get the traffic that others do, but at least its out there if someone goes out looking for the information.

@WhatYouHaventSeen

5 жыл бұрын

"My channel doesn't get the traffic that others do" How times change :P

@EnergeticWaves

2 жыл бұрын

@@lockpickinglawyer you sure get the traffic now!

@DavidShepheard

2 жыл бұрын

@@lockpickinglawyer 2016: "My channel doesn't get the traffic that others do, but at least its out there if someone goes out looking for the information." Later: "This is the LockPickingLawyer and today I'll be unlocking the KZread algorithm."

I know this is an older (but very useful) video and i am very impressed with the way a cut-a-way lock demonstrates how the right pick makes such a huge difference between getting the lock open or not. Awesome video! Thanks lpl.

@GamingMarine02

7 ай бұрын

Older… your telling me lol

My word, this stuff might be years old and the production value is so different, and this is a baby LPL by today's standards, but this information is still gold! Thanks LPL!

Great video!! As a beginner I struggled for so long with a S schlage keyway until I mastered it and I until seeing this video was scared to face anything more parametric than that, now I feel confident and am going to buy a steep hook or 2 :D

@lockpickinglawyer

7 жыл бұрын

Thanks. I was a bit intimidated by the SC keyway in the very beginning as well... I made this video because I wish it was out there when I started picking.

LPL from the future sent me!

@BONKshling

3 жыл бұрын

Me tooo!!

@lockloony4291

3 жыл бұрын

Me too.

@ismannen567

3 жыл бұрын

Me three!

Probably one of the more important videos, given new life.👍👀

I’ve come here from the future to tell you that you will one day have millions of subscribers.

I love this video because you not only showed how narrow keways can be overcome, but you also showed the cutout...how the inside of that type of lock works.

No doubt the best instructions pal video I have seen in months and months. Give yourself a big pat on the back,great work Sir👍👍👍👍👍👍👍👍👍👍🍻🍻🍻🍻🍻🍻🍻😘😘👏👏👏👏

@lockpickinglawyer

8 жыл бұрын

+Pick Beard Thanks for the high praise. I'm very happy to see that experienced pickers find this useful.

Oh thank you for that bit of explanation! I've been having problems with even Schalge C keyways and a 0.015... time to vise up some hunks of brass and get picking! :)

@lockpickinglawyer

7 жыл бұрын

No need on the schlage c keyway. Get a .025" standard hook and pick by levering your hook off the angled side of the keyway on the left.

Great video. Very clear demonstration on the cutaway core. Nice instructions. Thank you for pointing that out.

@lockpickinglawyer

8 жыл бұрын

+Mike Pergl Thank you.

Lock picking lawyer's flow is a lot better in 2021. He is talking much slower but I know he is teaching.

Its amazing watching this video after watching your newer ones. The amount change is so great. Keep up the AMAZING work!

Hands down the best LPL video I’ve seen!

Awesome, this worked very well for me, I was just able to open my EVVA lock which I was never able to open before. This just took me to the next level man, thank you so much!! Btw, no master pins in my lock!

*Mind* *Blown* Glad you pointed this old video out in a new one!

@lockpickinglawyer

6 жыл бұрын

Thanks... Glad it was helpful.

Great tips - just what I was looking for. Thank you!!

@lockpickinglawyer

8 жыл бұрын

+Povl Kvols Glad you liked it. It's the video that I wished was around when I started picking.

This is so helpful. As a new lock picker I have been trying to work my pick around the wall of the warding to reach the pins on really tight paracentric keyways. I will now re evaluate my approach 👍🏻

You really have come a long way in your quality of presentation and videography.

YOOO... blast from the past after today's video. What a change in voice and delivery.

Thank you so much. This is a great help to get into such paracentric Keyways. Great and very informative video: Thanks!

@lockpickinglawyer

8 жыл бұрын

+dirk Thank you.

Really great video mate, great idea to use a cut away plug. Perfect explanations, a pleasure to view. Thanks for sharing ;-)))

@lockpickinglawyer

8 жыл бұрын

Thanks

Yet another fantastic video with great hints and tips ;o))))

@lockpickinglawyer

8 жыл бұрын

+waddac2 Thank you.

The entire time, i thought it was me..... Thank You!!!

Such a useful video. It helps me in picking my ABUS Titalium locks with their paracentric keyways.

It sounds more normal at 1.25 playback speed. I'm curious if the older videos were slowed down a bit to help disguise his voice.

@Reg_The_Galah

3 жыл бұрын

I feel in his older videos he isn’t as relaxed compared to his new videos.

Great help, only just started picking and never really through about the shape of the pick until now

Here from video #1248 ... that's a lot of locks picked.

@blfimrtsgnziv9549

3 жыл бұрын

same

I got my Covert Instruments' companion to learn to pick, but all I had were Aussie Lockwood and Able locks... thought I was just never going to work it out. So I got a cheap Master lock, managed to rake and pick that consistently after a few days of intermittent attempts. In fact, it's kinds almost too easy to open that lock if you shove anything into it (nice one Master locks!). That got my confidence up a bit. But still was stuck with the tight keyways on the Lockwoods. This video cracked it for me... now I can feel the pins and start getting better at this with trickier locks!

@yasinhenfs4540

8 ай бұрын

great stuff bro

Great subject, and awesome job with your demonstration using the cutaway!

@lockpickinglawyer

8 жыл бұрын

+Git Pick'd Thanks!

@AlbertLebel

6 жыл бұрын

I agree, that cutaway is a great view of how the pick CAN fit

Brilliant LPL just awesome and a fantastic instructional video. Thank you for sharing.

Learning how to pick locks from a lawyer... fascinating! 😄

This is like... INSANELY obvious. I don't mean that as a slight towards you; you're awesome for realizing this and putting the knowledge out there. I'm just kind of blown away that nobody considered that the thickness is not the issue [compared to the length/shape]. How is that possible?! I feel like it might be one of those rare situations where something is actually _more_ obvious to a total noob than it is an expert (for whatever reason)

Great video with information that will help many pickers.

@lockpickinglawyer

8 жыл бұрын

+LockSportSco Thanks -- that was my hope. This was an issue I struggled with in the beginning. Hopefully I'll save others the grief I went through!

This video made the biggest impact on my picking. Only wish I saw it sooner.

thanks for linking this, very useful view on the inside

Excellent explanation - guess I need some more picks Great work, thanks

@lockpickinglawyer

8 жыл бұрын

Any excuse to get some more picks is a good one.

You hit a home run on this one. Awesome video with great content!

@lockpickinglawyer

8 жыл бұрын

+Tahoe Picked Thank you.

Thanks for this video.......I've just started trying to pick my first paracentric keyway and this was super helpful....

Thank you my friend this video was very helpful. I think I might be able to get some of these locks I've been having trouble with open now.

This! I thought I can't pick a particular lock at all. Watched this and have picked open it immediately.

You truly should write a book on the subject, I've as yet to see any print books that more than scratch the surface of the field (hobby).

Absolute great advice :) and very nice to see with the cutaway lock. I think I will have to make me a number 7 hook and try it out ;). Thank you so much. Also never seen a green Peterson in 0.015...always thought they were blue.

@lockpickinglawyer

8 жыл бұрын

Thanks, and good luck. Peterson had some accident picks made about a year ago... they were in clearance, so I picked up a few of the green ones.

Excellent explanation. Seems a lock maker could make the lock nearly unpickable if there was a second keyway halfway down the cylinder.

A most useful video for a beginner like me - thank you.

A brilliant video, very very Informative

Loved this video. Started picking a few days ago with the Lokko Beginner's Box over on Lockpickworld, and was having a TON of trouble trying to do anything in an American 1100. Tension bars were too thin and favored BOK tension, couldn't rake it, and my only 2 hooks were shallow and thick. I ordered a Sparrows Spirit Set, some TOK tension bars, and some thin SSDeV hooks. We'll see how that 1100 fares against those, though you could probably pick it with a paperclip.

excellent as always!

@lockpickinglawyer

8 жыл бұрын

+Jeff Moss Thank you.

Thank you. Yes, many keyways are flat out intimidating visually. But I would agree, use the right tool for the job.

I have watched a lot of your videos and this has been one of the most useful. Unfortunately I need to buy yet more picks!

Great video! I have two Sparrows picks with similar designs and have never had a use for them. Now I know what for and how to use them. Many thanks!!

Fantastic video. I really needed to know that! This will be very helpful for my future picking :D Thanks!

Hah :) here is where the ALS I sent out poped up :) Awesome! Really informative video, I will send it to a few people :D

@lockpickinglawyer

8 жыл бұрын

+vde Thanks. I wish that I could give you more information about the path it took, but as much as I hate to say it, I forget how this one made its way to me. Check out my pick and gut video on it from a couple months ago. I think Bosnian Bill has the other half of this lock, at least he did a video of a similar ALS with the exact same bitting a good long time ago.

been struggling with these, good video

@lockpickinglawyer

8 жыл бұрын

Thanks - hope this helps/

That was some really good info.

I hate when people say they won’t / avoid covering stuff other people have covered. Your audience likes you, the way you explain things, your tempo, your demos, etc. so even if you cover the same content someone might learn better from you. And that’s not even accounting for whether they’ll discover those other sources, whether they’ll still be available years later, etc.

This Video helped me a lot Your learning Videos are the best

Great video, I had some real eyeopeners. I'm going straight back to my locks and practice what I just learned.

this video is like 0.5x speed compared to his modern ones

@esatd34

3 жыл бұрын

and 4x longer

@koolkille3

3 жыл бұрын

@@esatd34 a lot of his earlier videos are more educational on picking compared to his more recent ones

@esatd34

3 жыл бұрын

@@koolkille3 he probably already taught so much of what's there to be taught. So it's understandable I guess

@koolkille3

3 жыл бұрын

@@esatd34 that’s my thoughts on it too, he has a lot of tutorials if you go through his videos there isn’t much else to teach unless it’s some specific skill set needed for certain high security locks

@it_smee

3 жыл бұрын

I played it at 1.25x speed, sounds a lot more like future LPL

Great video, great subject, thanks.

@lockpickinglawyer

8 жыл бұрын

+Peter M Thanks.

Nice info thanks this should helps lots of peeps out, including myself

@lockpickinglawyer

8 жыл бұрын

+uk lockpickers Thanks -- Glad you like it!

Great Video and Great Advice thank you.

Great video. Wish I’d watched this sooner!

Great video with a different approach to help me with picking. One thing my bangood set doesnt seem to have is a pick like the ones you showed. In fact not a whole lot of reach on the hooks i have but great set for me to learn with. Ill try add a few bits soon. This will help me figure out what to get,thanks👍

Not the production value of your new videos, but more informative than most.

Very informative, thank you for recommending it.

@lockpickinglawyer

6 жыл бұрын

👍

Every time I watch you nowadays I get an advertisement for the British “Kinetica K4” lock. You won’t see this comment on such an old video but I would love to see you get into one

thanks for clearing this up.

@lockpickinglawyer

8 жыл бұрын

+A&J Locks Thank you.

Great video! I wish I had seen this months ago.

@lockpickinglawyer

8 жыл бұрын

Thanks... I know the feeling. This is the video that I wish was around when I started picking.

Wow....this is a realy nice lesson!

Wow your voice is so different now compared to then. Much slower, softer and less assertive in this video. So cool

Great video.

@lockpickinglawyer

8 жыл бұрын

+Texas Jim Thanks, Jim.

Very helpful thank you!!!

I was actually worried you were feeling ill or something, the flair and enthusiasm you developed in later videos just wasn’t there in this one, didn’t realize it was such an early vid (especially since it was showing cutaways, which you’ve been doing a lot recently).

awesome video thank you!

Great job and thank you.

@lockpickinglawyer

8 жыл бұрын

Thanks for watching and commenting.

great video

Thanks for that!!! I had trouble picking YALE Y1 now, its way easyer for me !!

@lockpickinglawyer

8 жыл бұрын

+Hugo Martel Very glad to help. Good work on the Yale. IMO, Y1 is actually harder than many of the crazy/unusual warding locks that I have made videos of.

@hugomartel8552

8 жыл бұрын

Yea I know The "holes" arnt very deep...

if you want the video to play like a normal LPL video today, put the playback speed to 1.25

Video 1248 sent me. Who else ?? lol

@Mark.G475

3 жыл бұрын

Me! Mark in Milwaukee Wisconsin 🇺🇸🍺🧀

@esatd34

3 жыл бұрын

Yeah. So slow and long. Not used to that.

I want more videos like this 😀

I rarely comment but your videos are truly dumbfounding. I had a feeling this ^ is the case but you've helped me confirm solidly. Of course a cylinder must fit through a hole Most of your material has gems all over. I come to learn one thing and then I learn 10. If you will have me as a student (or protege if you have none) I also (whether you decide to accept my request or not) I respect and look up to you and will be happy to be of any service. Anything you need done in the UK, let me know. (Free of charge of course, if I haven't made it clear enough; it would absolutely be my pleasure)

Great! Thank you so much.

@lockpickinglawyer

7 жыл бұрын

Hope it helps. It's one of the videos that I wish was around when I first started.

I know this is an old video but god it has helped me thanks LPL

Excellent vid matey👌🏻🔓

@lockpickinglawyer

7 жыл бұрын

+mickeyrs3 Thanks.

Eye opener!