My driver's side door lock began doing this last year. In the 36 years I've owned my IROC, the only thing that I had to replace (twice) was the rear hatch pulldown motor assembly.

@thecamarogarage

4 күн бұрын

I've had my camaro since 1998 (32 years). I keep all my receipts and do recall when I first got the car there were many electrical issues... Windows motor replaced nearly every year for like 3 years, door actuators probably 3 times. Soon as I changed the actuator to this new system, I've not had a single power door lock issue.

Finally someone notice this issue after so many years. Thanks alot for pointing this out.

@thecamarogarage

2 жыл бұрын

Thanks very much. Mine is still working strong! :-) Be sure to share it abroad ;-)

Great suggestion. Just did it on my 89 IROC and they work great.

@thecamarogarage

5 ай бұрын

That is fantastic!! Yeah, it's been working perfectly ever since I first did it and I love it because I can easily adjust the stretch simply by adjusting where the collar is locked on the horizontal rod.

Mine didn't work properly however, after I blew out the dirt from the actuators / rubber boots, and lubed with silicone spray, they have worked perfectly ever since. Very good video, Thanks.

@thecamarogarage

Жыл бұрын

Thank you very much! Yeah, I tried everything.. I had brand new actuators but still they wouldn't last all that long... To this day, these new door locks using that idea is STILL rock solid in it's powerful OPEN/CLOSE! LOVE IT!!!! Also I like it because I can't EASILY adjust it more or less.

As far as the door clips are concerned I had luck at the junk yard. When I go I stock up on clips and all those hard to find screws not only for door panel cluster but also for the radio , instrumentation panels and on top of the air intake manifold. Those torx screws are a mother to find. Dealer couldn't even tell me what size they were... what a bunch of nuts. Thanks for video. I thought I was having issues with the relay on my door locks. But right now both sides are weak as hell. Have to hit them 3 or 4 times to open and to close from both sides as well.

@thecamarogarage

2 жыл бұрын

Yeah for YEARS I couldn't figure out what was wrong. Took it into multiple shops and each time they just changed the relay or actuator and a few months later I would discover my power locked, especially the passenger, didn't actually lock.. so I found if I accidentally hit the unlock button remotely, I would need to go to the car to ensure when I hit lock that it fully locked... was so aggravating and since this change, I've not had a single issue since!! 😀

Great video! Just the kind of mod that make life easier for third gen Camaro owners. Thanks and keep on doing what you do!

@thecamarogarage

Жыл бұрын

Thank you so much for your kind words :-)

I just bought an iroc and the locks are weak. I searched for a solution and your video was it! Thanks for making it easy!

@thecamarogarage

2 жыл бұрын

That is awesome to hear! I was dealing with this issue for YEARS and really couldn't believe how easy and so far how it's been a 100% cure for my door lock issue. Not had a single issue since so I'm happy to see that it's worked and helped another person.

Cool video.

@thecamarogarage

3 жыл бұрын

Glad you enjoyed it

Definitely going to do this on my firebird, I have to hit the lock switch multiple times before it actually locks/unlocks

@thecamarogarage

Жыл бұрын

Thanks for the comment. Yeah I did these years ago (didn't compile the video till later on) and i've not had a single issue since! What's great about this way is that if you feel it's not working as strong, you can EASILY adjust the collar and the position of the rods so that it extends more or less.. I dealt with this issue with my door for YEARS.. Took it to countless repair shops and NO one could figure it out.. I'd pay like $200-$400 to buy new lock actuators because each shop would say they were weak, or had a weak signal, or bent, or defective, or relay was defective... replaced them all and all were just GUESSES... This way has been amazing! And al I am happy to see that it's working for other people! :-)

Nice video. What did you use to lubricate the door moving parts? Thanks.

@thecamarogarage

2 жыл бұрын

I used mayonnaise. Lol kidding 🤣 no, it was a white lithium grease in an aerosol can.

@milesmania1150

2 жыл бұрын

@@thecamarogarage I have some put mine is squeeze tube so more difficult. I thought so. I will have to remember when I open my door cards.

@milesmania1150

2 жыл бұрын

What did you use to keep the plastic moisture barrier back on?

@thecamarogarage

2 жыл бұрын

I don't actually have the barrier anymore... That was removed many years ago.

Nice video are you in the Vancouver Bc area? If so how much would you charge to do Mines

@thecamarogarage

2 жыл бұрын

While I appreciate the offer, I honestly don't have the extra time. It's really not hard to do. Just follow my video and you shouldn't have an issue. The actuator kit you could get on Amazon Canada www.amazon.ca/Install-Essentials-524N-Power-Motor/dp/B0009SWLE6

@suneesra7074

2 жыл бұрын

Sounds gd buddy I will give it a try I live in surrey bc if I have any issues I will let you know. And nice car buddy looks great 👍

@thecamarogarage

2 жыл бұрын

Sounds good! :-)

that's a much more modern actuator. The OEM is just a solenoid. These are motor driven it i am correct.

@thecamarogarage

2 жыл бұрын

Hello. Actually the Mechanism that mechanically locks/unlocks the door is an actuator not a solenoid. A solenoid is an electromagnet. Both the OEM Actuator (A motor with gears that operators the actuator arm) and the Universal Door Lock Actuator that I installed here are similar to a point. Both are mechanical motors but different in how I mounted the universal. Rather than running the OEM door Actuator VERTICAL and attaching to a 90degree bent hinge to pivot on and then attach to the HORIZONTAL rod that leads to the inner door lock knob as well as the actual Door lock mechanism. The issue I found is that there is flex of not only the door panel sheet metal, but the pivoting arm reduces some of the power that comes from the actuator. Mounting it (the universal) HORIZONTALLY which connects DIRECTLY to the rod by passes the flex and the distance. This has been a 100% fix for my weak doors which were getting worse year by year. Plus you can adjust the stretch of the push/pull simply by changing either the angle of the custom bent rod attached to it, or the slider itself.

what headlights do you have in your car?

@thecamarogarage

4 ай бұрын

The headlamps on the car are from Octane Lighting, and the Headlight LED's are Motormoto 2 Stroke 3.0. I have done UNBOXING, REVIEW, and INSTALALLATION VIDEOS for both but need to compile them. Stay tuned for those :-)

Link to actuator kit?

@thecamarogarage

2 жыл бұрын

It can be purchased on Ebay or even Amazon: www.amazon.ca/Install-Essentials-524N-Power-Motor/dp/B0009SWLE6

Why not buy a gm pig tail for the door locks so you can plug everything in?

@thecamarogarage

Жыл бұрын

Im not sure what you mean ?

Get rid of those stupid plastic pins holding the panel on. I used magnets on mine. They stay in place just as well and make removal a breeze.

@thecamarogarage

2 жыл бұрын

That's an interesting idea.

@RonSavage01

2 жыл бұрын

@@thecamarogarage everyone I show says it's brilliant. I laid them on the back of the panel, covered them in duct tape to keep I place, and then the panel goes right.

@1940restorod

10 ай бұрын

@@RonSavage01BRILLIANT

@chrislee4544

9 ай бұрын

I got rid of my plastic pins as well. Now I use velcro (with the adhesive backing). Using magnets is a good idea too though.

@thecamarogarage

9 ай бұрын

Yeah, I've had a few people suggest using magnets. Could be something to try sometime... :-)