Hell yeah 800hp is perfect to complete against all these new cars coming with 500hp plus now an days. Just changed the diff in my xf last night thanks for the vids on how to remove cv axles lol.

@onefastboi14

Жыл бұрын

Indeed it is. Hoping to swap blowers on my Jag and make like 600whp would be super solid.

@andresgarcia6884

Жыл бұрын

@The Car Guy honestly 600hp is a realistic number to get to easily on these cars an hurt some feelings in the process lol

@Ricky50scJustalil6cylinder

Жыл бұрын

@@onefastboi14 I don't know how hard it is to swap the blower in ur car but if u can get the 1.9l blower to work with ur car u can make big power. The 4.2 motor is a really good motor better then the 5.0 in my opinion the only thing holding it back is the supercharger is just not efficient enough the faster u spin worst it gets in efficiency. The 1.9 just make more power the faster u spin it only thing u need to have is is good floweing exhaust setup.

@yayakyartu2061

Ай бұрын

​@@Ricky50scJustalil6cylinderя немного понимаю о чем вы говорите но перевожу плохо , не могли бы вы написать какой у вас вышел спек лист запчастей для достижения поставленной цели 800. Hp

Really awesome info you shared Ricky. Love you channel. Thank you.

Nice work. Dope car. Thanks for sharing your work. I'm on my second XF. Love this car. All the style, comfortable and more than enough power for a long highway cruise.

Hello of a beast Ricky!!!! Crazy is that there is more in her still!!

Superb Ricky! Decals on way and maybe who know even a splitter one day 😎

Your Jag is fucking sick. Dope as they come. Sad there aint much for these X351s

I have exhaust dumps on mine would really love your take on keeping engine temps down

Put your seatbelt on! Or turn the seatbelt alarm off.

sick ass aj133 i just pulled my motor out of my JAGUAR XJ-L SUPERSPORT GETTING MY BLOCK SLEEVED .i get it back later today .so i can start putting it back together ⚙🏁🏁🏁🏁🏁

I think it is the super charger port and tune. You can do E40 and add some more power as well

A Legend bro. KysXFR here🤝🏼 I miss my baby

@Ricky50scJustalil6cylinder

Жыл бұрын

Hey so what happend did u finish rebuilding the engine?

@chanogeezy6022

Жыл бұрын

Definitely a legend

Awesome work!! One of the few Jags I could find with documented work. I have the v6 supercharged awd version and have been wanting to tinker on it. What did you do to get your aftermarket seats in?

@Ricky50scJustalil6cylinder

5 ай бұрын

I made custom brakets for the seats and wrapped them I. Alcantara leather looks really good and thanks man I dint make make a video installing the seats because I wasn't sure if I was gonna be able to make these brakets so I dint want to upload a halfass video to KZread haha

I have dumps online would really love your take on keeping engine temps down

@l3wn3ytun3z4

Жыл бұрын

Meth

Have you replaced the timing chain?

Hey man sick jag i got myself one and now im going in😜😈you mind telling me whats your exact rear wheel setup thanks

Hey love the videos! Just wondering what you did to you down pipe? Did you hollow out the cats or go catless?

@Ricky50scJustalil6cylinder

2 ай бұрын

Custom made 3" dowpipes

that whine reminded me of a hellcat 😂

Hellcat killer

I’m in Texas where should I take my 2011 xf to

Doing this setup to my rover 😂

Did you do your main pulley? I seen videos of just both pulleys and exhaust with tune and make 650-700. The Arden tune also. And what oil you running cause mines just spun a bearing

@Ricky50scJustalil6cylinder

Жыл бұрын

No crank pulley yet at the end of this year I will get one. And yeah those cars make 650-700 crank I'm making that same power to the wheels which in crank hp it around 800hp.i use cheap oil stp from autozone😂 I do add the stp oil treatment I feel like it helps alot

What did you do for extra fueling? Was told that you couldn't go too small on the upper pulley when combined with the lower pulley due to fueling restraints. I have meth injection on my other vehicle and I know it adds extra fueling when WOT.

@Ricky50scJustalil6cylinder

5 ай бұрын

I still have the stock crank pulley plus I'm using methanol for extra fuel

Hey I just separated the supercharger cooling from the main radiator, do you know how I can bleed the supercharger circuit I think I have a bubble trapped in it

@Ricky50scJustalil6cylinder

Жыл бұрын

You need a separate water reservoir is really hard to bleed the system without it plus extra water in the reservoir helps to keep intake Temps down.

How did you get the 2.17 pulley to fit? Ground the snout?

@Ricky50scJustalil6cylinder

Жыл бұрын

Yes had to grind the snout

What are the major failure/reliablility issues you have to deal with on this platform for the supercharged motor? Do you know what year to get? Looking to get into this platform.

@RobertStrickland9619321

6 ай бұрын

I'm not an expert, but the 5.0 (2012 or 2013 through to 2015 in the XFR) and also used on the Range Rover Sport 5.0... is nearly bullet proof. ((Prior to 2012, I think they used a similarly strong 4.2) I am replacing a known failure point, "crossover pipes" or a series of coolant pipes the dealer will know should be replaced by 10 years. Up around the 600+ HP you should address radiatr and cooling system.

Increible trabajo, como lo hiciste con los flujometros q son 2 y dejaste solo uno ??

@Ricky50scJustalil6cylinder

Жыл бұрын

Tengo los 2 uno Abajo y otro arriva del tubo del aire

@gihbli

Жыл бұрын

@@Ricky50scJustalil6cylinder en serie??

Love the XF bro I got a 2010 XF supercharged about 2 months ago all stock dealer maintained car. What top 3 mods do you think gave you the most performance? exhaust pulley tune?

@Ricky50scJustalil6cylinder

Жыл бұрын

1 tune 2 full exhaust 3 upper pulley

@ddt1983

Жыл бұрын

​@@Ricky50scJustalil6cylinderI have a upper pulley and intake (not on my car yet) for my 2011 Jag XF..... Any recommendations on where to get it tuned after I install it, I'm in the LA area

@Ricky50scJustalil6cylinder

Жыл бұрын

@@ddt1983 you should really consider @alphajagtuning he's in sandiego ca and can ship his tuning equipment anywhere.

@rimmiym9130

10 ай бұрын

​@@ddt1983 I'm in l.a as well I have a SC xjl hows ur build coming along?

@ddt1983

10 ай бұрын

@@rimmiym9130 bro I still haven't installed my upper pulley, I just have too much other stuff I'm dealing with at the moment

James bond should have been driving that

What did you do with the second MAF sensor when you went to a single intake?

@Ricky50scJustalil6cylinder

4 ай бұрын

Its under the intake tube

Nice Jag man!! I have a 2010 xfr bolt ons & tune pushing 590 to the crank conservatively. Is your tranny & diff handling all thay power okay??

@Ricky50scJustalil6cylinder

2 ай бұрын

Yes 590 is nothing for these transmissions the diff seems to be holding pretty well too no issues

@henrymint

2 ай бұрын

@Ricky50scJustalil6cylinder I'm only running a tune on 91 and had the car tuned on a dyno. Would think the dyno would give more accurate numbers than a remote tune. You have the supercharger pulley upgrade but no crank shaft pulley upgrade?? I wouldn't upgrade the crank shaft ...... I bought it with both upgraded and it ended up siezing 2 bears. Supercharger created to much boost & over time it gave. How many miles do you have on the tune?? And I'm guessing yours was remote & hp was an estimation?

@Ricky50scJustalil6cylinder

2 ай бұрын

@@henrymint I haven't seen any tuner unlock the full potential out of these cars there's torque limiters that haven't been found only way to get the full power is to run a piggyback ecu which is what I have that will bypass most of the torque limiters an allow you to make power. That's why I only have an upper pulley and have the quickest jaguar even quicker then the dual pulley lighter weight f types. I recently tried running a gm 8" pulley it worked it I ended up just taking it off because it wasn't properly centered now am having one custom made it ran 10.19 at 137mph based on a 1/4 calculator the car is making around 850hp. Honestly if you do everything right do all the maintenance you can get really good reliability out of these motors never had issues I have over 500+ runs in my draggy and never had issues

@Ricky50scJustalil6cylinder

2 ай бұрын

@@henrymintman you are missing out on power 590 crank hp that about 500whp my car stock these cars dyno at about 450-480whp a well tuned 5.0 is capable of 650+hp with stock pulleys

So you are saying there is enough in the stock injectors to support 800hp? I didn't catch any fueling upgrades... maybe I missed it.

@Ricky50scJustalil6cylinder

Ай бұрын

I have a snow performance direct port injection on 100% methanol fuel stock fuel system runs out at about 680hp

Cool made as powerful as dodge charger hellcat 800 widebody

What the difference between a coyote and the jag 5.0

@Ricky50scJustalil6cylinder

Жыл бұрын

Totally different engine

If be keen to see a ticket and dyno sheet to prove the power... Im sure these are at their upper safe limit about 700ish? If you've managed to do it then fair play but there's people with more mods and less power from reputable tuners?

@Ricky50scJustalil6cylinder

8 ай бұрын

Nobody knows the limits of this engine what makes you think 700 is the limit? There has been 0 engines blown up because of too much power. Is all in the tuning I got a fully unlocked ecu that's why I'm able to make more power than other jaguars that have dual pulleys and alot more modifications done. These superchargers have been pushed to over 900hp in the chevys and cadillacs. I will get a byno pretty soon is just hard dyno these cars specially my car because I'm running a different size tire then oem

@Ferg2jz

8 ай бұрын

@@Ricky50scJustalil6cylinder I'm sure I read on a jag page about this company that went to do some racing with the F-type and as they got up to around 700bhp the block was starting to flex and the pistons started having issues. Saying that, we don't have E85 on tap here in the UK so maybe that would help to a degree.. Not sure it'd help over 100 extra more bhp at the wheels though? I'm just thinking that there's a reason the big tuners have only gone to 700 with the engine surely? Also for the dyno, just lob her on a hub dyno, doesn't matter the wheel and tyre setup you have then. I'd be keen to see if it makes the claimed power because if it does, it's hit a new benchmark and props for that 👍

who did your supercharger porting?

@Ricky50scJustalil6cylinder

Жыл бұрын

stiegemeier.com/

How much was it to get the snout and throttle body ported and where

@Ricky50scJustalil6cylinder

Жыл бұрын

$617 including shiping. stiegemeier.com/

@joelmontes6330

Жыл бұрын

@@Ricky50scJustalil6cylinder I have a jaguar ftype v6s and it’s dual pulley intake exhaust and tune planning going on e85 but what does that help with

@joelmontes6330

Жыл бұрын

For the ported

I bought a 11 jaga xf 5.0 s thinking it was supercharged is it possible to put the supercharger on it & if so where I look to get one

@Jamaicaboi2X

8 ай бұрын

Aw dang so the V8 5.0 is not the supercharged? I'm looking at a 11 xf 5.0 it's V8 for 11k

@RunitintoG

8 ай бұрын

@@Jamaicaboi2X some come supercharged I guess mines a premium s but then i don’t know cause I got snow mode dynamic mode sport

@Ricky50scJustalil6cylinder

8 ай бұрын

@@Jamaicaboi2X there's a v8 5.0 with no supercharger and a 5.0 with a supercharger confusing but to make it easier if you have the quad exhaust pipes then it has a supercharger

@mujuable

6 ай бұрын

Just sell it then buy the beast

Did you put the xkr seats in ?

@Ricky50scJustalil6cylinder

Жыл бұрын

Aftermarket seats

@mujuable

6 ай бұрын

Can I have a link/description of the seats please

800 horses?!?!?!?! How

I bet does over 200 mph

How many miles

@Ricky50scJustalil6cylinder

Ай бұрын

116k

You can't sit that low in the XF, you won't be able to see the next 5 kilometers of road ahead of you

Can i have your car please 🤣🤘

You replied to my comment but I can’t see it any more what did you say?

@Ricky50scJustalil6cylinder

Ай бұрын

That other guy started going on all My videos commenting dumb comments so I muted all his comments so my reply got deleted just got enjoying. Anyway my reply to you was I recently got the supercharger ported and a 105mm tb and an 8" crank pulley and went 10.19@137 I made a post about it on the Facebook forums I was just having issues with the pulley because it wasn't properly centered and can damage my crank bearings but I'm having a 9" pulley made I will need to remove the vaccum pump for this to work.

@Ricky50scJustalil6cylinder

Ай бұрын

m.facebook.com/groups/289733432870876/permalink/983341370176742/?mibextid=Nif5oz

@MarcoTopG

Ай бұрын

@@Ricky50scJustalil6cylinder damnnnn a 10.19 is absolutely crazy. That’s almost in the 9s happy for you man. Absolutely fast your car is definitely like 700-770 whp

@MarcoTopG

Ай бұрын

@@Ricky50scJustalil6cylinder makes sense👍

@MarcoTopG

Ай бұрын

@@Ricky50scJustalil6cylinder can I ask how much you’ve spent on every single mod you’ve done until now? Like an estimate of in total?

800hp? through the stock manifolds? im not doubting it's fast. nut not 300hp over stock fast.

@Ricky50scJustalil6cylinder

5 ай бұрын

Yes cylinder heads seem to flow really good these engines are very efficient similar design as the ford coyote

Fuckin' hell: can you use the seat belt??? Especially because you are driving a car with 800hp and you uploaded the video to the WORLD WIDE web! So everyone knows that you will hit the windscreen! (or remove it) We're waiting for the video!

@Lucifer-qt9gh

4 күн бұрын

Ding ding ding...dudes deaf lol that ding is to annoy you into putting the belt on...

hahaha... yeah, 800 HP my ass.

i got 3.0 sc and i regret not getting the 5.0 every damn day 🥲🥲 might just buy it cus idgafff