Пікірлер

• 
  @THA6reat111 сағат бұрын

  Kool 😎

• 
  @user-hp8np2cq5mКүн бұрын

  Hello, your insta link doesn’t work, is there other options to contact you? Best regards!

• 
  @stewarthumphreys8960Күн бұрын

  Hi bud... I've been thinking about replacing the supercharger snout bearing .. Can you get to it with just the top cover off or do you have to remove the complete supercharger? Also will it need new gaskets.. ?

• 
  @cumminsturbo98Күн бұрын

  You will need to unbolt the supercharger front the engine and tilt it up but you technically don’t have to pull it out all the way and only gasket that’s on the snout is RTV

• 
  @AaronSmith561Күн бұрын

  Notification Gang

• 
  @enricovanni49633 күн бұрын

  So, you jacked the entire rear end using the diff casing. You now have f'kd the rubber bushings holding the diff to the rear subframe as well as the output shafts to the rear wheels. This isn't an old live-axle car y'know where jacking the diff is safe. PS. I have done a complete rear subframe replacement on an XF so I know what I am talking about. Anyone watching this - don't copy it!!

• 
  @Ricky50scJustalil6cylinder2 күн бұрын

  @@enricovanni4963 I use the suframe to jackup the car. these cars have aluminum differentials

• 
  @stewarthumphreys89603 күн бұрын

  Hi bud.. Quick question.. Have you ever changed the boost sensors on the 5.0 engine? The front one looks easy to get to but there is one at the rear.. Was wondering if you have changed them and how was it finding and foing the rear sensors?

• 
  @Ricky50scJustalil6cylinder2 күн бұрын

  @@stewarthumphreys8960 there's only one boost sensor behind the superchager manifold driver side you will need to pull the supercharger to get to that sensor. The front is just a map sensor

• 
  @stewarthumphreys89602 күн бұрын

  @@Ricky50scJustalil6cylinder Cheers bud..

• 
  @don94pgt4 күн бұрын

  Measuring behind the butthole, huh 😊

• 
  @Quantumxbit7 күн бұрын

  ❤

• 
  @Quantumxbit7 күн бұрын

  🎉

• 
  @Steve-gc5nt9 күн бұрын

  Jaaaag

• 
  @ShadowPlayz-bl4bx10 күн бұрын

  🇵🇷😎👍

• 
  @damianyoung788112 күн бұрын

  My xjl can run’em. Need to get tuned but I’m running 600+

• 
  @fact_speaking_police158812 күн бұрын

  Nice🔥 can this be done on a diesal 2.2 xf?

• 
  @AndyK.113 күн бұрын

  Add wings and it would take off 😂

• 
  @AaronSmith56113 күн бұрын

  That thing just wants to whine and spin

• 
  @TrueBlueWR14 күн бұрын

  Awesome video! Your channel and build has came a long way. My 2010 autobiography is still going strong (5 years.) Still only straight piped.

• 
  @ryu1000016 күн бұрын

  Car & Driver logged a 3.8 0 to 60 in a 2014 RWD v8 f type with 40k miles on it

• 
  @ryu1000016 күн бұрын

  The rwd f type R is somewhere around 400lbs lighter than the awd. There's several videos on yt of stock rwd R's running low to mid 11s stock with just Michelin tires. Harder to launch on average but that weight difference is a huge advantage.

• 
  @certiCertified16 күн бұрын

  Think it can touch 9’s? I’m interested in getting this 2015 jaguar xf 3.0 sport rwd and building it, never seen no jag build in Cali

• 
  @DPW86416 күн бұрын

  Man, that thing is a top tier now. Dont think anything comes close now!

• 
  @buckio500517 күн бұрын

  My engine blew to over heating in February what should I do ? Rebuild it or swap it

• 
  @Ricky50scJustalil6cylinder16 күн бұрын

  @@buckio5005 depends on how bad I overheard if is still cranks then you have a good Chang to have it rebuild if the engine is seized then you gonna need a new engine

• 
  @DDLNX17 күн бұрын

  You do realise you measure a screen size on the diagonal???

• 
  @wraptordesign18 күн бұрын

  Fastest Jaguar in the world? Based on what?

• 
  @Ricky50scJustalil6cylinder17 күн бұрын

  @@wraptordesign I should say quickest in the world base on 1/4 1/8 and 60-130

• 
  @tylerboulware90214 күн бұрын

  Or maybe based on the fact every other 5.0 supercharged Jag barely makes 700hp even with both pulleys. So yes, fastest jaguar in the world ... that still has an actual jaguar motor in it👍

• 
  @bradenostrowski666918 күн бұрын

  Have you looked at the new supercharger released by velocity ap for the xfr? It’s a direct bolt on and upgrade to a 2300cc

• 
  @Ricky50scJustalil6cylinder17 күн бұрын

  @@bradenostrowski6669 I got a 2022 gt500 supercharger I'm pretty sure I can make it work its a 2650 the 2300 is just too expensive plus I heard they only going to release it to people with their tuning packages

• 
  @kylepalmer236018 күн бұрын

  Doing this setup to my rover 😂

• 
  @axeami135419 күн бұрын

  hey man what head unit is that ? looks so much better than jags stock unit!

• 
  @motibenita11119 күн бұрын

  Beast!!!!!

• 
  @den-tech-mods19 күн бұрын

  nice job ,the crank pulley made a huge difference on mine with the remap from velocity ,enjoy that power, ,make sure you locktite the bolts, thats a must

• 
  @bigmatt289619 күн бұрын

  is this a 5.0? if it is how come there is only 1 intake?

• 
  @jullianvelazquez796019 күн бұрын

  Upgraded to cold air intake

• 
  @landyachtjayy19 күн бұрын

  He’s running a cts V intake

• 
  @storcas125 күн бұрын

  🔥🔥 yoo Ricki , I tried message on IG Nd Fbook , Still cant get in touch with you . I need you help me to pick the right pulley for My jaguar 🙏🏾 . I do not have no tune . Its a 5.0 V8 XFR

• 
  @bradenostrowski666925 күн бұрын

  Hey what intakes do you have? I’ve been looking for so long and I haven’t seen anything that looks as high quality as yours, I got the Mina gallery Intake kit but I was very disappointed and heat shields very low quality.

• 
  @Ricky50scJustalil6cylinder25 күн бұрын

  My intake is made for the cadillac cts v with some modification I was able to make it fit into my car this is the cheapest inthe made for the cadillacs I plan to upgrade to a carbon fiver one in the future

• 
  @AaronP22025 күн бұрын

  Everything for these cars as far as intakes go are shit, or don’t exist. The Mina ones rob power. I’m currently developing an all carbon PROPER cold air for these cars that uses dry cone filters, uses factory ram air tubes and wheel wells for induction as well as correctly mounts the MAS sensors, unlike the joke system from Mina that just sits on a rubber tube bouncing around. Prototype is made - just waiting on dyno time and then I’ll show it to the market!

• 
  @Quantumxbit25 күн бұрын

  🎉

• 
  @alexanderbaez0725 күн бұрын

  Hello !! Nice video!!! Im in south California i have a 2011 range rover l322 supercharged o would like to do some updates, where are you located.

• 
  @bigmatt289625 күн бұрын

  Regular oil changes with decent oil, decent fuel & don't bounce it off the rev limiter

• 
  @user-me2ow1tu4d25 күн бұрын

  I bet does over 200 mph

• 
  @user-me2ow1tu4d25 күн бұрын

  Cool made as powerful as dodge charger hellcat 800 widebody

• 
  @pierceplpperez371129 күн бұрын

  How many miles do you have on your jaguar?

• 
  @DMoneyInAJagАй бұрын

  I wanna be like you one day 😎

• 
  @QuantumxbitАй бұрын

  ❤

• 
  @romeguerrero5239Ай бұрын

  This really makes me miss my XF. I think the first video I watched of yours was the how loud is a straight piped XF. You’ve come a long way. Keep grinding

• 
  @user-en7nf4hc5zАй бұрын

  Any advice on how you got the bigger TB to work?

• 
  @QuantumxbitАй бұрын

  🎉

• 
  @leebaw989Ай бұрын

  Where did you get the digital climate control upgrade? I'm in the UK also love the colour of your wrap

• 
  @tremonti2137Ай бұрын

  What were the symptoms to change the mounts?

• 
  @VehicleRevolutionАй бұрын

  Car looks and sounds amazing Ricky! Can’t wait to see the new carbon skirts fitted soon 🔥🔥🔥

• 
  @marino4691Ай бұрын

  You jack your car in the sand??

• 
  @10mm_brosTVАй бұрын

  Should black out the chrome trim

• 
  @mrwilliams5335Ай бұрын

  I know you're car is heavily modified but how reliable is that Particular model I've been thinking about getting one and going the same route as you.

• 
  @marino4691Ай бұрын

  You can't sit that low in the XF, you won't be able to see the next 5 kilometers of road ahead of you

• 
  @Faith-ke8rlАй бұрын

  I’m thinking about getting an 2011 xf 5.0 and doing some work to it.. coming from the Honda family.. how many miles do you have today with upgrades.. and how long these things last 170,000 to 200,000

• 
  @Ricky50scJustalil6cylinderАй бұрын

  They can last a very long time people have see kver 200k