80 series land cruiser front pinion seal. Seal installation. 3 of 3.
Тәжірибелік нұсқаулар және стиль
3 of 3
3 of 3 videos because I don't have the time to edit videos at the moment.
Here is a video of a great dude on the drive shaft marking. Plus uni joints replacement.
• Universal Joints & Pro...
TORQUE
108-320 pinion bolt 30mm
54 for front flange bolts 14mm
Parts:
cruisercorps.com/products/pin...
Get the nut too!
Do this seal if you are doing your universal joint.
Пікірлер: 5
was hoping to see how you tightened up the nut . did you count the turns or did you tighten to a torque setting?
@JoonRhee
Жыл бұрын
Sorry about that! Yes i did the torque spec via a very small torque wrench from Amazon. Such a tight space you need the small one. But a criss cross patten as usual. Just keep everything as it was and you should be good. Mark it all
@DIFFLOCKERS
Жыл бұрын
@@JoonRhee oh I mean the pinion nut not the drive shaft nuts
@JoonRhee
Жыл бұрын
@@DIFFLOCKERS for that one I did a torque wrench as well. And it seemed to have lined up with where it was last time. But you do need to put blocks at the front and rear of the tire or the truck moves forward or backward!
@DIFFLOCKERS
Жыл бұрын
@@JoonRhee cheers mate :)