Just replaced the shift solenoid in my neighbors durango. The owner was going to scrap it until I fixed it then he gave me the title. 😂

@memorandum740

Ай бұрын

😂

This is the absolute best video online!

I have a subaru and took it to the dealership they recommend a flush and if that doesn't work a new transmission.... I bet getting a flush and replacing the solenoid will resolve the issues....

@billcallahan9303

7 күн бұрын

It did mine! Works like new now!

Thanks, very well explained

Nicely done. Thanks

Very informative! 🎉

🦉..Great information, thank you..👍🙏

Well explain boss, thank you

Great video thanks

Thanks this help alot.

Just changed the fluid in my 07' accord but noticing more when I let off the gas feels like the trans isn't locked. Drives and shifts fine only when I let off the gas 🤔

The bad news is that every transmission shop they're going to try to sell you a new one or rebuild it and it's 5k dollars and up this why everyone sell their car instead of fixing it

@brometheusthefirstbro4302

Ай бұрын

Tell em to go fuck themselves and either they buy the parts that are needed to fix and it and fix it, or you take it to another shop

@TheChenrezig

Ай бұрын

This is very common and it's sad that they will lie and tell you that you need a full transmission change rather than just swapping in a new solenoid pack. These shops are very dishonest because they make all their money on providing new or rebuilt transmissions, not doing a simple quick and inexpensive fix for the customer. This is why the videos advice to take your vehicle to a transmission shop is false because they have every motivation to tell you that your entire transmission is broken, rather than just the simple smaller component.

@davidburchell2882

Ай бұрын

Dodge dealer wants to charge me $7000 to put new rransmission in

@billcallahan9303

7 күн бұрын

​@@TheChenrezig....and many people fall for it, especially women with clueless husbands or boyfriends!

Whelp, just learned my shift solenoid was on the way out, and I learned it the hard way. My shift B solenoids for my 3-4 clutch pack in my 4L60e was fresh from a transmission rebuild, and it was only partially actuating. As a result my 3-4 clutches were slipping without me realizing, and I just had a complete 3-4 failure. Pulled out the solenoids and yep, Shift B clicked great, Shift A when having 12 volts applied barely clicked.

Well explained

Thank you you are the best no I know what could be wrong with my transmission

My 2001 Infiniti I30t obd2 shows code for celioniod transmission assembly but it shifts smoothly however do hear scratching noises on 1st and 2nd gears sometimes. It has 163,000 miles.

Would this cause rear tires to stop in reverse? Checked the pads and everything, everything seems ok there. Can’t figure out what’s wrong it’s a old Dodge 2001 dually.

VW DSG09 transmissions are notorious for valve body (shift solenoid) problems. Changing the ATF will not fix the problem of hard shifting and flares. There are some good videos on KZread all about this VW transmission. Don't undertake this job if you are not confident in your abilities and have good jack stands and hydraulic jacks for backup. Always stay safe before getting under a car!

@TylerSmithMusic1

2 ай бұрын

Currently in this situation 🥲

@billcallahan9303

7 күн бұрын

All true on the safety aspects! I don't use any jacks etc. I just cram my ass under my '05 Sorento & fix it about 2 inches in front of my face. Old country boy here! Tough as nails! Stupid too! :)

nice video bro

Thank you very for knowledge. A big help.

Nice video

Thanks I got a 02 avalanche and yeah it definitely does all of these but changed good in first second gear

@lionelfrancois9503

5 ай бұрын

You got a update on it ?

What are the reasons for the 20-minute delay in engaging the Daihatsu automatic transmission?

Who here suspects they have a Bad Shift Solenoid?

@dondupre395

5 ай бұрын

I have an 06 canyon that I suspect has a bad solenoid it has reverse and all forward gears but only if I shift them manually for instance when I put it in Drive its like a second neutral but if I put it in 1 amd shift it manually it will go through all the gears and even overdrive if Im in drive and already at speed whats your thoughts

@JoseGonzalez-xm5sd

5 ай бұрын

My transmission shifts from first to second but shifting into third it's shifts back to first

@Yananiso

5 ай бұрын

I do... Is it advisable to change the whole gearbox

@tiffanylawson704

5 ай бұрын

Not me. I just enjoy learning

@d_marquis_ls

4 ай бұрын

My 2007 grand marquis needs something done because I drive in o/d. Been doing that since I purchased the car. Now the transmission is doing some wacky stuff, basically everything named in the video besides complete failure. Help!

Forgot the step, Remove each solenoid one at a time, test-clean-test it, replace accordingly.

@edwardzamorski3711

3 ай бұрын

Whats best way to test

I have a question about my 2WD 2011 Ford Ranger Automatic Transmission. It was supposed have been replaced about 2 1/2 years ago and was working fine until last year when a problem started occurring. when leaving to go somewhere the transmission would go into drive fine, however after going a short distance of a few blocks and usually when coming to a stoplight, when I go to accelerate from the stop the transmission lose drive gear, after stopping and shifting into park, or reverse it eventually will engage again and go on shifting normally. A couple times it did continue to slip. However it typically would return to normal operation without further problems. I found the problem seemed to be less frequent during the hot Phoenix summer. I checked the fluid level and it was ok. I found more increasingly lately I would lose drive when entering the freeway during acceleration and have avoided driving on the freeway completely. The problem has became very frequent when leaving for the past few months but typically goes away after the initial loss of drive which will "Engage' after a few seconds or longer and no longer slip or act up and operate normally. Today while driving close by after and during rain and cooler temps that Drive completely failed after stopping a couple places a block away and then refueling. Reverse also would not engage completely and slipped, but D1 and D2 worked ok and I did make it home. I tried several time to go and try it in Drive and Reverse, and drove around the mobile home park to see if things would return to normal, but it continues to slip badly. It did flash the O/D light during these tests which from my research indicated slippage after 3 attempts. I tried adding additional fluid but the problem continued. Tonight I let it run idling in park for about 20 minutes. When I tried it again it seemed to work as normal without slippage, however I did not take it out on the street, only at slower speed around the park where it did shift from 1st to 2nd fine and had no apparent slippage. Last year I did remove the equivalent of a bottle of Lucus Transmission Treatment worth of transmission fluid drawn from the Dipstick Tube, and added the Lucus treatment hoping to resolve the issues, which did seem to help, but may have been due to operating at hotter temps during the summer. Do you have any suggestions? Would a fluid & filter change be advised? I would guess I have about 30K miles on the "Replaced Transmission" and everything operated normal for over a year until the problems stated occurring. The fluid I removed looked good, not dark or contaminated. Do these symptoms indicate a problem with transmission electronic controls/computer module or shift solenoids? Any ideas or help would be greatly appreciated. I have tried finding videos on this ford automatic transmission with similar issues with no luck. It's odd that the transmission fails like this after just driving less than a block or a few blocks and stopping, not able to engage in drive when starting forward acceleration again, then within a few seconds or sometime after rolling to place to pull over then stopping, trying shifting to park, reverse etc.. then it will engage and operate normally with no slippage. I just found today that D1& D2 worked when Drive and Reverse would slip badly with almost no engagement, just slight forward and backward movement respectively. I did not rev the motor excessively as to not do damage, or have a "Hard Engagement" and break something. I have a question about my 2011 Ford Ranger Transmission. It was supposed have been replaced about 2 1/2 years ago and was working fine until last year when a problem started occurring. when leaving to go somewhere the transmission would go into drive fine, however after going a short distance of a few blocks and usually when coming to a stoplight, when I go to accelerate from the stop the transmission lose drive gear, after stopping and shifting into park, or reverse it eventually will engage again and go on shifting normally. A couple times it did continue to slip. However it typically would return to normal operation without further problems. I found the problem seemed to be less frequent during the hot Phoenix summer. I checked the fluid level and it was ok. I found more increasingly lately I would lose drive when entering the freeway during acceleration and have avoided driving on the freeway completely. The problem has became very frequent when leaving for the past few months but typically goes away after the initial loss of drive which will "Engage' after a few seconds or longer and no longer slip or act up and operate normally. Today while driving close by after and during rain and cooler temps that Drive completely failed after stopping a couple places a block away and then refueling. Reverse also would not engage completely and slipped, but D1 and D2 worked ok and I did make it home. I tried several time to go and try it in Drive and Reverse, and drove around the mobile home park to see if things would return to normal, but it continues to slip badly. It did flash the O/D light during these tests which from my research indicated slippage after 3 attempts. I tried adding additional fluid but the problem continued. Tonight I let it run idling in park for about 20 minutes. When I tried it again it seemed to work as normal without slippage, however I did not take it out on the street, only at slower speed around the park where it did shift from 1st to 2nd fine and had no apparent slippage. Last year I did remove the equivalent of a bottle of Lucus Transmission Treatment worth of transmission fluid drawn from the Dipstick Tube, and added the Lucus treatment hoping to resolve the issues, which did seem to help, but may have been due to operating at hotter temps during the summer. Do you have any suggestions? Would a fluid & filter change be advised? I would guess I have about 30K miles on the "Replaced Transmission" and everything operated normal for over a year until the problems stated occurring. The fluid I removed looked good, not dark or contaminated. Do these symptoms indicate a problem with transmission electronic controls/computer module or shift solenoids? Any ideas or help would be greatly appreciated. I have tried finding videos on this ford automatic transmission with similar issues with no luck. It's odd that the transmission fails like this after just driving less than a block or a few blocks and stopping, not able to engage in drive when starting forward acceleration again, then within a few seconds or sometime after rolling to place to pull over then stopping, trying shifting to park, reverse etc.. then it will engage and operate normally with no slippage. I just found today that D1& D2 worked when Drive and Reverse would slip badly with almost no engagement, just slight forward and backward movement respectively. I did not rev the motor excessively as to not do damage, or have a "Hard Engagement" and break something.

I have a 2006 Chevy Colorado with 240K miles. Transmission is not shifting out of first automatically. If I run the RPMs up to 3500 and let off of the gas, it shifts to the next gear. Is this indicative of a bad shift solenoid(s).

2007 Pontiac g6 I can move the shifter and It goes in reverse, neutral and manual but when in drive its stuck in neutral. What is this? I've had a new transmission filter change and still no luck

Theres one of the little pin in the selenoid A that is more losse then the other 3 very easy to pull . is this why my transmision slip to neutral after hitting 20kmh??

How many people will actually do this? Maybe one in a million. Most people today don’t even know or care how to check the oil much less open a transmission and replace parts.

Hi. my car pathfinder 2010 4.0 when changing gear from P to D or from R to D, there is always a delay of 2-3 seconds when shifting to D. The rest works very well. What can be? Electrovalve? I have new, original oil. Could some solenoid valve be responsible for this? while driving everything is ok. this is most noticeable when it's hot. and when I change from R to Drive. thank you for the information

I’m getting a P0720 with AT light on my dash. I thought I solved the code by replacing the output speed sensor, but it came back weeks later. I drive a 2011 Mazda 3 2.5L so if y’all have any advice I’d greatly appreciate it.

@swishyboi7444

2 ай бұрын

Best is to replace valve body with TCM that will solve the problem

When I engage in reverse, it jerks and moves smoothly but sometimes does not move at all. When drive is engaged, it sometimes skips 1 and moves to 2. It jerks when changing from 2 to 3 and the engine RPM will raise as if it enters natural before 3 is engaged. It does not engage 4 & 5 at all even when speed and acceleration is increased. When the car is stopped or speed reduced, it remains in gear 3 most of the time except if the can is brought to a total halt. Whey could be the problem; solenoids, verve body or what?

Hello iam richy i have a 1993 hilux surf its a 2lte automatic 4*4 recently its had an issue with the gear shift the timing is not correct and 4th gear coming up its revving in 3rd gear once thea soeed is more thsn 100 it will shift can you help me eith that ?

Please kindly help me i have a problem with my nissan qashqai 1.6 automatic 2015 .the mechanic diagnosed it with a P2815 Pressure Control Selonoid Valve G problem.Please kindly help me as i cannot find any qualified technician to help me fix it.I reside in Sheffield South Yorkshire.

does a bad shift solenoid keep a 2000 honda civic from going in every gear but drive?

does a shift solenoid affect the transmission going into overdrive?

Im having issues with the 2016 exploder 4cyl ecoboost transmission. It tends to bang into reverse once you've only throttled up like its not getting pressure thru the solenoid. Ive had the reverse solinoids replaced twice. First time under warranty. Second time it never helped. I replaced the whole valve body and solinoids, and there was no change in the reverse bang. I've changed the fluid twice, with lucas aditive no change. I believe there is a glitch in adaptive learning. I've had it reset and still issues! It angers me after 100 years of design that computers are destroying transmissions when mechanical transmissions worked fine. Aaaaaaaaaah! Help!

Thanks for this video. My 98 Regal has a leak. Every now and then, it will not go into reverse. Is this due to the shift solenoid or something else. Would a flush and the obvious leak rpr do? Thanks!!

@realtalk1429

3 ай бұрын

I have the same problem here...I replaced my fluid and leak..and seemed to get a bit worse...hope this helps

I had a problem whereby the car slows down before entering gear 1 when you put it on drive. But changes changes and downshift a well oncws it finally enter gear. It turns out that two of the transmission selenoid went bad. I had it replaced and the problem stopped.

I have been experiencing the same thing

Did anyone fix this issue?

Please let me know how to fix it

Sir, when I put my 2008 Ford Explorer in Reverse and D, the vehicle does not move, but the RPM increases. However, when the gear lever is shifted to 3, the vehicle moves, indicating that it is capable of driving. Is it enough to change the solenoid pack to address the problem? I went to many local repair shops and described the situation, but they all told I needed to overhual the gearbox. What are your recommendations? Should I get a solenoid replaced and tested, or should I get a gearbox overhaul?

@voogarix

9 ай бұрын

In any cases you have to change valves + oil. If it doesn't help then you will need to disassemble the gearbox..

@MAbid-zt7nm

9 ай бұрын

Sir, the update is that I went to the local transmission shop, and they said they would make the transmission okay. I got the vehicle after 4 days, and while testing it for 2 days, the wrench sign came back. it happen when put the leaver to R and jerk comes with wrench sign, I returned the vehicle to them, and they said there were codes on the ECM, which are solenoid B and C. They take the vehicle and replace the solenoid. Both the first and second solenoids are rebuilt. Again, I tested the vehicle for 2 days, and the wrench sign came back. I went to the shop again, and they said the same codes came back. They now believe the ECM is false. They also ask about the engine and transmission cabling, which I told them I replaced around 4 years ago. It means they are trying to blame this issue on the ECM and that their transmission rebuild or whatever they did was perfect. sir now suggestion what to do or where is the fault. Thank You

My 2012 GMC terrain drives like 200 Miters and removes all the gears while shifting to the 3rd gear. Is it the solenoid or torque convert need a replacement? Or another transmission

@ItsmeBish584

8 ай бұрын

Burn that car. I had a 2014 terrain denali for 3 yrs and had to put a new engine in it and then the transmission started messing up. Had nothing but problem after problem with that POS.

@kaiwasami

8 ай бұрын

I replaced the transmission, and everything is good now

Some professionals are failing us

My dodge grand caravan has a 62te transmission i had the transmission done less than 10000 miles ago. Now it is reving and not shifting into gears 2nd ect. Could it be the intermediate shaft speed sensor or something more serious

@ronaldstrauss5762

9 ай бұрын

My 93 is doing the same I'm won't shift out of first, and I Idoling high/reving . Did you find a solution?

Hi. Great video. My question is that my Honda civic 2005 Automatic transmission Car cannot move on Drive and reverse. But very slowly and after some meters running coming on nuteral and not moving on giving accelerator. What problem?

@billcallahan9303

7 күн бұрын

I had similar problems in my '05 Sorento. I just changed the transmission fluid & filter. Didn't check solenlids at all. Works great now!

What is it when the transmission won't go into drive when cold but I can either turn the O/D off or put it in "2"/"1" and it goes into gear just fine? Once warmed up it is perfectly fine.

@roughshodace7910

Жыл бұрын

i have issues when cold aswell

@idrisakano4625

Жыл бұрын

Honda Accord 2004 fwd

@garybrady7245

8 ай бұрын

@BakaRed77 have you changed the filter and fluid. I've always heard that when your vehicle has hard time cold then fine when warm it usually means your transmission fluid is done or has been burnt or just not doing its job anymore. Everyone does know that you should change your transmission fluid around every 30-60,000 miles don't they? If you haven't changed it ....change it and the filter. And I get that some people say don't change it and guess what I do I change it anyway and have never had a problem one with it killing the tranny. And I've changed some nasty transmission fluid, the kind that will gag ya when smelling it

Can codes for gearratio monitoring

I have a Nissan Altima 2006, engine laboring in gear, and pretty much in park as well, while stopped at a light. Not looking forward to the Dx.

I have everything working in 97 corvette except 5-6 won’t work. Reverse also works could this be it?

Update on my '05 KIA Sorento with 205,000. Book says 2 quarts of transmission fluid when changing. I did. Didn't even show on stick. I cautiously added another quart, did it all by the book and using this video as a guide also. Nothing after 3 quarts. Added a 4th. Just started to appear at the bottom of the stick. Added a 5th. Got barely to the bottom cut of where it's supposed to be. Asked myself, should I add a 6th. quart? Remember, they only said 2. I didn't add another quart but did add 16 ounces or so of Barr's molasses. That got 'er at least inside the bottom cut/line whatever you want to call it. Anybody with a KIA Sorento ever experience this? Over 6 quarts when book called for 2.

My 1992 Buick Roadmaster Wagon is having trouble accelerating making whining noise 😩

I have a 2015 nissan nv200 and I feel it it jerks when driving especially after a 5 minutes driving. By buddy said it's a transmission or could be a torque converter.

I have a 04 Chevy 2500 hd it has the forward gears but no reverse gear strangely it will move a little bit in neutral in the reverse direction like fluid pressure is being applied to the reverse circuit but as soon as it moves to a small bump it stops it from moving anyone ever had this problem I checked the codes it has a 700 code flagged saying it’s something to do with the f solenoid

Can bad solenoid drain battery ?

Please help, I drive a 2004 toyota corolla. There is not enough accelerating power when I select on D AND 2,But reverse and L2 Works perfectly

@veni.vidi.vici.1278

3 ай бұрын

Did u ever get it fixed??? I have similar issue. When getting into first gear. With my 07 Lexus IS250

2006 mustang auto , gear up was perfect, gear down from 2 to 1 gave hard jerk. Also reverse. Replaced solonoid, now's downshift issue gone but opposite upshift jerk in ALL gears has come. Changed to another used Solenoid, same isue. What could be the cause?

@Tylers24

Ай бұрын

The used solenoid duh? Why would you try and fix a bad solenoid with another used one? Quit being cheap and get a new solenoid

@_dude..

7 күн бұрын

Get a new pack and change them all. Never buy used ones.

Hi, just got a tyranny code, check engine light, did the oil in the transmission, and still came on .Thx for info .

@josecueva5564

2 ай бұрын

What was the code

I have an 04 pilot that drives normal, but has recently started to fall into a false neutral. See you when you stop at a stop sign or we’re going real slow around the corner it doese it but if I put it in D2 I can take off again and then put it back in the drive and it’s normal. Any ideas on what’s going on there?

@chevyman2067

6 ай бұрын

Did you figure out what the problem was?

@smittysmitty4681

6 ай бұрын

@@chevyman2067 no ?

@chevyman2067

6 ай бұрын

I figured out that my problem was the cv axel on the passenger side poped out of place. Seems to be working now so maybe look in to that...good luck man

Let us go back to cars that were simple. All this solenoid and fluid is doing my head in.... lol

@lifestyleqboutique

5 ай бұрын

I agree

When I put my car to drive it doesn't move when putting on jack i turn wheels with a hand

Am using 2004 honda Accord 3.0 v6 My problem is whn i kick full acceleration rip goes high and rpm is cutting off.. not shifting to next gear .but when i drive normally all gears are shifting normal.. only in full throttle rpm is cutting and not shifting anyone knw why?

Im getting a p0757 code on my 2006 Honda Odyssey. From what I read, its from a Bad B solenoid. Hoping my problem is fixed after replacing this part! I first suspected this problem when my (D) drive light was flashing, then the check engine light came on. But For some weird reason, the lights have dissapeared from my dash. No check engine light, No D light flashing. Van seems to be running normal, but im still getting the error code when I put a scanner to it. Hoping the replacement fixes this issue! Anybody else have a solenoid problem with a honda odyssey?

My Toyota sienna 2005 the drive is not working when the engine is hot that is when drive

I got P17FO code for my car Can anyone explain about it please

2012 Ford Raptor. Won’t start. Battery good. Drove fine. Won’t start. I was thinking that it is in the linkage. Turn the key and won’t turn over.

Just happened to my 2022 silverado 3.0 duramax , code P0747 20 k miles on it now back to the dealer to check issue.

I rebuild my 2000 Astro one year ago and started to kick on first gear

Also I don't trust any mechanic you take it to a transmission place they're going to tell you it's going to cost 3 to $5,000. They're all about the money that's all they are about. I've never found a mechanic that doesn't rip you off actually only one in my entire life so far but he is no longer in business. Mechanics are money hungry rip offs most of them

Yeah

Unfortunately my 18 impala is slipping, but NO code at all.

When I back out the garage in the morning, everything is fine. When I shift into drive to take off, there’s a delay. This doesn’t happen always, it mostly happens when it’s cold outside.

@edwardzamorski3711

3 ай бұрын

Me too

@DavidPacJr

3 ай бұрын

@@edwardzamorski3711 what does it mean????!!!! lol

Need to be near 4k revs before car suddenly lurches forward. Thinking its transfer case

I do on a 2017 Ram 2500

When you add fluid. Start car, manually shift through gears. Check and fill as needed. Add a couple quarts of atf before you start the procedure. (Car off)

What about if my car just simply won’t drive forward? It goes into reverse , it shifts gears, just won’t drive forward.

@gilbertkiprono4189

Жыл бұрын

Check your transmission fluid level. Most likely low or dirty. I'd recommend you change it

@matthewengle9554

Жыл бұрын

Pressure control solenoid

@azaeldimas7225

Жыл бұрын

RIP in advance

@breadwinnermolicker9375

11 ай бұрын

U ever fix your car

@ivanchostefanovski2351

11 ай бұрын

My camry also won't drive forward would you like to tell me how do you fix the problem .I am from Macedonia and my toyota camry is only and one on the whole state I import from USA and mehanic doesn't know how to fix thanks

My Ford Explorer XLT made a noise that sounded like the auto t

So the problem is the shift solenoid on my 2009 honda civic exl 🤦🏾‍♂️ 😢

The third gear in my truck won't catch? Can I just powerglide?

@Ry77x

4 ай бұрын

I have 83 caprice that’s doing the same thing. You figure it out?

@jpowe2822

4 ай бұрын

@@Ry77x had to get it rebuilt by a older retired transmission guy. But when I drove it I didn't go over 35 miles

@jpowe2822

4 ай бұрын

@@Ry77x I figured as long as long as I keep the rpms below 2000 I was good

@Ry77x

4 ай бұрын

@@jpowe2822 thanks for the reply man

Ive got an interesting one. 2004 camry 2.4. Put in drive/reverse runs correctly for about 2-3 minutes. After that everything goes into neutral no matter shifter position. Let it cool off and it repeats. I thought tcu was getting hot so i put salvage on and exact same thing. During the 2-3 minutes it works correctly, it will spin the tires, so not clutches. Im thinking electrical, possibly a solenoid because it seems like something is getting hot. It loses any movement after couple minutes. Once cool and restarted, the movement returns but only for 2-3 minutes. No slipping clutches. It's either working or it's not. Like a switch gets flipped. U241E. Would a specific solenoid cause a complete neutral situation? Any ideas please?

@ericmccain6924

11 ай бұрын

Did you fix this issue?

@headpainter1

11 ай бұрын

@@ericmccain6924 after trying the new ecu/tcu and it did exactly same thing, I thought possibly a fluid restriction so I pulled pan. Some sediment but no metal pieces or chunks. Filter looked clogged so I put new filter and fluid. Now it shifts ok but will randomly freak out and do different things. Sometimes it will hesitate between gears, last time I was cruising in second gear and it shifted to first for no apparent reason. I'm thinking it might be a speed sensor but still not throwing any codes. Don't want to just throw parts at it $$. I have access to a u250e I might could get vss Off tranny if they are same. Gotta check.

@galaxyhome4387

11 ай бұрын

Hi. Did you fix it? I have the same problem. First i replaced the whole transmission and after 3months it started doing the same thing. Any feedback?

@galaxyhome4387

11 ай бұрын

Cold runs good but once it gets hot the transmission stops working

@headpainter1

11 ай бұрын

@@galaxyhome4387 I haven't had a chance to mess with it. Lots of rain where I'm at. What is the make and model of your transmission?

Solenoids causing leaks????? Um, all solenoids are in a enclosed environment. Inside, in the shell.. Look at all ZF transmission.. even some of the Older ford focus solenoids. All enclosed? how you gonna cause a leak like that?

@_dude..

7 күн бұрын

You'd only get a leak from the oil pan or torque converter seal. Or the oil cooler.

How do you know it's not the Throttle sensor ?

@panzerwaffen2873

Жыл бұрын

A bad throttle sensor allows you to move gears and if you scan the car throttle sensor codes will come out

@juliuscaesar756

Жыл бұрын

What the fuck are yall talking about the guy makes more sense than you 2 put together

@panzerwaffen2873

Жыл бұрын

@@juliuscaesar756 relax emperor stop using drugs they are killing you

shift solenoid always come with a new trans unless your doing it your self

Nothing mention on Reverse. Putting it Reverse. Hard shift when i put in Reverse

@fozzyyi5420

10 ай бұрын

Where you able to fix this I am having the same issue too

@505fastlife6

9 ай бұрын

​@@fozzyyi5420you probably have bad motor mounts.

2013 Subaru outback.. 🙏

How the hell does the engine coolant have to do with the shift solenoid? 🤣 😵

@phiksit

3 ай бұрын

The fluids both look reddish? not really, coolant is more pink 🤣

Delay shifting and shows a standard transmission. You just have to change only the driver. 😂😂😂

What year is this guy living in because 300 to $500 for shift solenoid? Shit it would cost at least $2,000 for my car. Let me know if you know anybody around me to change my shift solenoid for that much money at least $300 to $500 I'll pay it

A commercial after every song??? NOPE

My car drives fine for about 2 miles then goes into trans fail program.

𝓅𝓇o𝓂o𝓈𝓂

@mr.keydavaocity2759

10 ай бұрын

I have issue kia soul 2011 pressure control solenoid valve A problem could you help.

I can’t stand these AI text to speech bots…

The grace and the peace be with you all from your God our Father, his son Jesus Christ and the Holy Ghost, thank you! But how many of you know the good news repent and believe in the gospel because the kingdom of heaven is at hand and crack the word, the Bible and continue blessing you amen! Luke 6:20-28-31-35-37-38-39-40-42-44-46-48

Why does the voice of this video also narrate destiny 2 videos