I get by with a little help from my friends #2023washseason #evolution #hustle #housewashing #roofwashing #x6 #powerwashing
Жүктеу.....
Пікірлер: 95
@ridethepace6005 Жыл бұрын
I phoned a friend today, asking him technical questions, and all he kept saying was " Vienna Sausages, Vienna Sausages ". No help at all!
@tristatepowerwashing Жыл бұрын
Glad we could help! Great video as always Joe!
@powerfulimprovements
Жыл бұрын
Deeply appreciated
@hookeduppressurewashing4954 Жыл бұрын
Sending Positive vibes your way Joe!
@Chris-nf2ej Жыл бұрын
Another fix I've found over the years...even with no pressure at all..is remove the caps and the plungers and turn the water on and flush the cylinders out sometimes debris gets inside...in this case was an obvious broken plunger but may help others ...also when I winterize my pumps I take the plungers out of each pump .....and blow air thru the line for long term winterization......ALSO you can take a two 5 gal buckets and draw from and cycle thru the gun back to the bucket with the winter rated windshield washer fluid NOT antifreeze as gums up sometimes... Hope this helps someone. Love the channel GLC Enterprises Northern Va
@powerfulimprovements
Жыл бұрын
Much appreciated. Great advice
@bigrobbigrob7156 Жыл бұрын
Great content here! Thanks Joe. 🙏💪✌️
@powerfulimprovements
Жыл бұрын
Appreciate it!
@razur9065 Жыл бұрын
That 8pm and M5 twist is a beautiful thing, i run a 4gpm and the M5 twist makes me sad, i don’t even use it. Way to get back up and going Joe!
@alfredrossi5268 Жыл бұрын
You are the best joe and smart
@powerfulimprovements
Жыл бұрын
✌🏼😂✌🏼
@SqueegeeCleanSteve Жыл бұрын
I would definitely suggest changing all the springs out to the new ones and keep the old ones just as a back up just in case
@MrNick- Жыл бұрын
I think I really needed this video. Yesterday and today I’m washing with the hose in one hand and I feel slight pulses in the hose. As if there’s low water, but that’s not the case. But I don’t notice anything with the water flow out the gun… Same PW you have. I’ll need to buy those springs tomorrow for backup. I always learn something from you
@powerfulimprovements
Жыл бұрын
✌🏼❤️
@LeagueofBasics Жыл бұрын
I have had this same issue this year on my 5.5 Glad mike helped you get it figured out!!
@sundown798 Жыл бұрын
Hey Joe had simmilar issues when the pump was running too hot, not bypassing properly. Wrecked valves and seals running hot. Check that before replacing fresh parts. The best thing I've done this season was all my unloaders are all quick connect to change them out quickly to test them too ect. Take care man!
@powerfulimprovements
Жыл бұрын
Great idea
@cleanmaxexteriorpowerwashing
Жыл бұрын
Did the pump oil stop cycling when the machine was on? I think I have a similar issue
@stevesoucy5217 Жыл бұрын
Outstanding video, Joe! Hate to see things go down on the job, but i learned a few things from your video. Much appreciated...and the ending is brilliant...ill be sure to tune in on the next video to see what happens. Also, im picking up more business on the midcoast; been in and around Damariscotta village quite a bit this spring. Well done! 😎💪
@lawnman66 Жыл бұрын
Outstanding work. Enjoyed. Harbor Freight breaker bar comes in handy for me.
@Marty-zd2lm Жыл бұрын
One pull baby ! Haha love it
@tonyyyyy4672 Жыл бұрын
That ending Joe! Geez lol I guess I'll stay tuned to find out 😂
@powerfulimprovements
Жыл бұрын
Sorry. Added a short. Long day
@johnwitt586 Жыл бұрын
Yeah, those brass caps are so darn tight! It's definitely a knuckle buster.
@jonboysprowash7845 Жыл бұрын
Sucks the valve went bad on you. Luckily you have the backup machine. I had to replace check valves in my old pump last year. One thing I’d recommend is a little blue loctite. My Bolts kept backing out until I used some blue and let it setup over night.
@powerfulimprovements
Жыл бұрын
✌🏼✌🏼
@shaferspressurewashing8911 Жыл бұрын
Thanks Bud!
@robertfling6173 Жыл бұрын
One pull baby!!!!
@MNpicker Жыл бұрын
That was a great networking experience 🤓👍🏻
@powerfulimprovements
Жыл бұрын
Truth
@Johnnyreengo Жыл бұрын
Thanks Joe. I am among my people here 😂
@stevenholloway4257 Жыл бұрын
Left us on a cliff hanger! 😂
@powerfulimprovements
Жыл бұрын
Sorry about that
@JDMSoftWash Жыл бұрын
No joke I am not kidding you had to change my check values today not very fun lol they put so much lock tight on them and what I have learned is always the first lower one by the water inlet is normally the issue.
@powerfulimprovements
Жыл бұрын
✌🏼✌🏼
@strictlycleanpressurewashi6220 Жыл бұрын
You called "The Fresh Rinse"
@samuelpaul508 Жыл бұрын
I can testify to that
@powerfulimprovements
Жыл бұрын
✌🏼❤️
@CustomPowerwash Жыл бұрын
I’m betting it’s your unloader. Those K7’s need replaced a couple times a year. But I love my K7’s. Smooth!
@seattleprowash5464
Жыл бұрын
Pulsar is the best
@seattleprowash5464
Жыл бұрын
Do you know Keith ?
@CustomPowerwash
Жыл бұрын
No sir
@paultorre2419
Жыл бұрын
I'm on the same k7 over 2 years.
@giovannireynolds6780 Жыл бұрын
It’s a check valve happened to me before. You can get it rebuilt.
@aces9915 Жыл бұрын
Mr. Vienna sausage himself I’m guessing😂
@powerfulimprovements
Жыл бұрын
👍🏼👍🏼
@scottschumacher1585 Жыл бұрын
Buy 2 sets of check valves and a reseal kit so you have it on the truck when you need them.👍
@OceansideExteriorPowerWashing Жыл бұрын
Joe do you think running 1.8 injector may have played a part? (More back pressure)? I’m only asking because I have the same pump and I too run the 1.8 when I come across especially dirty surfaces.
@richiestills Жыл бұрын
Did you check the filter before the 8GPM? If its too clogged it will also start to act starved for water.
@LanceSheppard Жыл бұрын
Might be a stupid question, but in a circumstance like this with the roof, do you have the customer sign something stating their wishes and they accept all responsibility and no liability will be held against you for being more aggressive ?
@mikemovila7732 Жыл бұрын
5.5 works just fine gets the job done.
@powerfulimprovements
Жыл бұрын
Yes. It gets the job done. But honestly the 8 runs circles around the 5.5
@colonialfiend Жыл бұрын
Joe, that maple is massive. What do you think the age of it is?
@powerfulimprovements
Жыл бұрын
At least 100
@michaelhoffman85 Жыл бұрын
The screen on your banjo filter needs cleaned happens on my 8gpm washer also hope it helps.
@pressurewashingbysterlingw9883 Жыл бұрын
Are you going to start marketing the “Joe No Valve”
@powerfulimprovements
Жыл бұрын
😂
@palmtree8604 Жыл бұрын
I have 2 - 5.5's on my trailer. And my work is starting to outrun me. I think I'm being forced into upgrading to 8's. We do a lot of flatwork.
@seattleprowash5464
Жыл бұрын
Siamese, ez pz
@powerfulimprovements
Жыл бұрын
Do it. The 8 rocks
@Johnnyreengo
Жыл бұрын
Siamese them together. 11gpm you won’t be able to go back. Game changer.
@palmtree8604
Жыл бұрын
I could Siamese them together but there are two of us.
@seattleprowash5464
Жыл бұрын
@@palmtree8604 have one guy dooor knock and pass out flyers
@cleanmaxexteriorpowerwashing Жыл бұрын
How can that happened, debris from well water maybe?
@TheGravygun Жыл бұрын
How many hours do you have on that 8 gallon per minute machine and did you get it from the wash mart?
@powerfulimprovements
Жыл бұрын
Close to 600. Manatee
@michaellaserre1624 Жыл бұрын
Was using the x6 not an option for the cleanings?
@powerfulimprovements
Жыл бұрын
Yes. It could have gotten the House Washing done
@noby5711 Жыл бұрын
You should make your 5gpm a 8gpm with lower pressure, its a GX 390 right?
@powerfulimprovements
Жыл бұрын
Genius
@zfish Жыл бұрын
Quick vid 23 mins
@newviewnc Жыл бұрын
Dude. What’s your house water bill each month? You fill the tank with your own water every day??
@powerfulimprovements
Жыл бұрын
Water is like 1 cent per gallon
@l.j.briesath4487 Жыл бұрын
I had problems with mine today and I am hanging on every word. Then it's over?
@powerfulimprovements
Жыл бұрын
Fixed
@paultorre2419 Жыл бұрын
Check the filter
@Baysideclean_co Жыл бұрын
I dunno. After getting my Comet P40. I don’t think I’ll downstream ever again. I found it made my 8gpm pump scream and chatter. Now I just save it as back up, and use it for surface cleaning only.
@Johnnyreengo
Жыл бұрын
Sounds like your injector was back feeding into your pump
@Baysideclean_co
Жыл бұрын
@@Johnnyreengo I dunno.. just never really liked it. Down streaming to 12v.. 12v to Comet 11.5GPM of hot sauce licks a building clean pretty quick. ☄️ At the end of the day, do what works with your budget and set up
@zackward5516 Жыл бұрын
Take 1 out of the 5.5 pump and see if it fits.
@powerfulimprovements
Жыл бұрын
It does not unfortunately
@seattleprowash5464 Жыл бұрын
you preferring the 1.8 or 2.1 these days?
@powerfulimprovements
Жыл бұрын
Yes. Much faster
@seattleprowash5464
Жыл бұрын
@@powerfulimprovements tried the 1.8 today on my 8gpm and machine went into bypass 🤣
@powerfulimprovements
Жыл бұрын
@@seattleprowash5464 something isn’t right
@seattleprowash5464
Жыл бұрын
@@powerfulimprovements interesting!
@powerfulimprovements
Жыл бұрын
@@seattleprowash5464 tell me more. What’s your 8? Belt? Gear? Unloader? Pressure setting? Most if not all guys use the 1.8 on the regular
@CustomPowerwash Жыл бұрын
Well dang I commented before I watched the entire video. Nevertheless the time will come when your K7 needs replaced.
Пікірлер: 95
I phoned a friend today, asking him technical questions, and all he kept saying was " Vienna Sausages, Vienna Sausages ". No help at all!
Glad we could help! Great video as always Joe!
@powerfulimprovements
Жыл бұрын
Deeply appreciated
Sending Positive vibes your way Joe!
Another fix I've found over the years...even with no pressure at all..is remove the caps and the plungers and turn the water on and flush the cylinders out sometimes debris gets inside...in this case was an obvious broken plunger but may help others ...also when I winterize my pumps I take the plungers out of each pump .....and blow air thru the line for long term winterization......ALSO you can take a two 5 gal buckets and draw from and cycle thru the gun back to the bucket with the winter rated windshield washer fluid NOT antifreeze as gums up sometimes... Hope this helps someone. Love the channel GLC Enterprises Northern Va
@powerfulimprovements
Жыл бұрын
Much appreciated. Great advice
Great content here! Thanks Joe. 🙏💪✌️
@powerfulimprovements
Жыл бұрын
Appreciate it!
That 8pm and M5 twist is a beautiful thing, i run a 4gpm and the M5 twist makes me sad, i don’t even use it. Way to get back up and going Joe!
You are the best joe and smart
@powerfulimprovements
Жыл бұрын
✌🏼😂✌🏼
I would definitely suggest changing all the springs out to the new ones and keep the old ones just as a back up just in case
I think I really needed this video. Yesterday and today I’m washing with the hose in one hand and I feel slight pulses in the hose. As if there’s low water, but that’s not the case. But I don’t notice anything with the water flow out the gun… Same PW you have. I’ll need to buy those springs tomorrow for backup. I always learn something from you
@powerfulimprovements
Жыл бұрын
✌🏼❤️
I have had this same issue this year on my 5.5 Glad mike helped you get it figured out!!
Hey Joe had simmilar issues when the pump was running too hot, not bypassing properly. Wrecked valves and seals running hot. Check that before replacing fresh parts. The best thing I've done this season was all my unloaders are all quick connect to change them out quickly to test them too ect. Take care man!
@powerfulimprovements
Жыл бұрын
Great idea
@cleanmaxexteriorpowerwashing
Жыл бұрын
Did the pump oil stop cycling when the machine was on? I think I have a similar issue
Outstanding video, Joe! Hate to see things go down on the job, but i learned a few things from your video. Much appreciated...and the ending is brilliant...ill be sure to tune in on the next video to see what happens. Also, im picking up more business on the midcoast; been in and around Damariscotta village quite a bit this spring. Well done! 😎💪
Outstanding work. Enjoyed. Harbor Freight breaker bar comes in handy for me.
One pull baby ! Haha love it
That ending Joe! Geez lol I guess I'll stay tuned to find out 😂
@powerfulimprovements
Жыл бұрын
Sorry. Added a short. Long day
Yeah, those brass caps are so darn tight! It's definitely a knuckle buster.
Sucks the valve went bad on you. Luckily you have the backup machine. I had to replace check valves in my old pump last year. One thing I’d recommend is a little blue loctite. My Bolts kept backing out until I used some blue and let it setup over night.
@powerfulimprovements
Жыл бұрын
✌🏼✌🏼
Thanks Bud!
One pull baby!!!!
That was a great networking experience 🤓👍🏻
@powerfulimprovements
Жыл бұрын
Truth
Thanks Joe. I am among my people here 😂
Left us on a cliff hanger! 😂
@powerfulimprovements
Жыл бұрын
Sorry about that
No joke I am not kidding you had to change my check values today not very fun lol they put so much lock tight on them and what I have learned is always the first lower one by the water inlet is normally the issue.
@powerfulimprovements
Жыл бұрын
✌🏼✌🏼
You called "The Fresh Rinse"
I can testify to that
@powerfulimprovements
Жыл бұрын
✌🏼❤️
I’m betting it’s your unloader. Those K7’s need replaced a couple times a year. But I love my K7’s. Smooth!
@seattleprowash5464
Жыл бұрын
Pulsar is the best
@seattleprowash5464
Жыл бұрын
Do you know Keith ?
@CustomPowerwash
Жыл бұрын
No sir
@paultorre2419
Жыл бұрын
I'm on the same k7 over 2 years.
It’s a check valve happened to me before. You can get it rebuilt.
Mr. Vienna sausage himself I’m guessing😂
@powerfulimprovements
Жыл бұрын
👍🏼👍🏼
Buy 2 sets of check valves and a reseal kit so you have it on the truck when you need them.👍
Joe do you think running 1.8 injector may have played a part? (More back pressure)? I’m only asking because I have the same pump and I too run the 1.8 when I come across especially dirty surfaces.
Did you check the filter before the 8GPM? If its too clogged it will also start to act starved for water.
Might be a stupid question, but in a circumstance like this with the roof, do you have the customer sign something stating their wishes and they accept all responsibility and no liability will be held against you for being more aggressive ?
5.5 works just fine gets the job done.
@powerfulimprovements
Жыл бұрын
Yes. It gets the job done. But honestly the 8 runs circles around the 5.5
Joe, that maple is massive. What do you think the age of it is?
@powerfulimprovements
Жыл бұрын
At least 100
The screen on your banjo filter needs cleaned happens on my 8gpm washer also hope it helps.
Are you going to start marketing the “Joe No Valve”
@powerfulimprovements
Жыл бұрын
😂
I have 2 - 5.5's on my trailer. And my work is starting to outrun me. I think I'm being forced into upgrading to 8's. We do a lot of flatwork.
@seattleprowash5464
Жыл бұрын
Siamese, ez pz
@powerfulimprovements
Жыл бұрын
Do it. The 8 rocks
@Johnnyreengo
Жыл бұрын
Siamese them together. 11gpm you won’t be able to go back. Game changer.
@palmtree8604
Жыл бұрын
I could Siamese them together but there are two of us.
@seattleprowash5464
Жыл бұрын
@@palmtree8604 have one guy dooor knock and pass out flyers
How can that happened, debris from well water maybe?
How many hours do you have on that 8 gallon per minute machine and did you get it from the wash mart?
@powerfulimprovements
Жыл бұрын
Close to 600. Manatee
Was using the x6 not an option for the cleanings?
@powerfulimprovements
Жыл бұрын
Yes. It could have gotten the House Washing done
You should make your 5gpm a 8gpm with lower pressure, its a GX 390 right?
@powerfulimprovements
Жыл бұрын
Genius
Quick vid 23 mins
Dude. What’s your house water bill each month? You fill the tank with your own water every day??
@powerfulimprovements
Жыл бұрын
Water is like 1 cent per gallon
I had problems with mine today and I am hanging on every word. Then it's over?
@powerfulimprovements
Жыл бұрын
Fixed
Check the filter
I dunno. After getting my Comet P40. I don’t think I’ll downstream ever again. I found it made my 8gpm pump scream and chatter. Now I just save it as back up, and use it for surface cleaning only.
@Johnnyreengo
Жыл бұрын
Sounds like your injector was back feeding into your pump
@Baysideclean_co
Жыл бұрын
@@Johnnyreengo I dunno.. just never really liked it. Down streaming to 12v.. 12v to Comet 11.5GPM of hot sauce licks a building clean pretty quick. ☄️ At the end of the day, do what works with your budget and set up
Take 1 out of the 5.5 pump and see if it fits.
@powerfulimprovements
Жыл бұрын
It does not unfortunately
you preferring the 1.8 or 2.1 these days?
@powerfulimprovements
Жыл бұрын
Yes. Much faster
@seattleprowash5464
Жыл бұрын
@@powerfulimprovements tried the 1.8 today on my 8gpm and machine went into bypass 🤣
@powerfulimprovements
Жыл бұрын
@@seattleprowash5464 something isn’t right
@seattleprowash5464
Жыл бұрын
@@powerfulimprovements interesting!
@powerfulimprovements
Жыл бұрын
@@seattleprowash5464 tell me more. What’s your 8? Belt? Gear? Unloader? Pressure setting? Most if not all guys use the 1.8 on the regular
Well dang I commented before I watched the entire video. Nevertheless the time will come when your K7 needs replaced.
First
@powerfulimprovements
Жыл бұрын
💥💥💥💥💥