Finally found a channel with a guy that’s straight to the point! You’re much appreciated!

Thank you so much for taking your time and making this video.

Excellent straight and to the point definitely subscribed thank you so much quite helpful!

Dang man. I buy and sell cars so I see it all. You have helped me so much. I just want to say thank you for all the knowledge. It’s isn’t easy to find but when I do a google search for specific issues your videos always pop up to help me find the solution

1. Broken motor mount 2. Broken transmission mount 3. Broken CV axel 4. Bad U-Joint 5. Transmission failure 6. Damaged shocks 7. Damaged leaf springs 8. Lose bolts or components

@ferdoushakim4245

2 ай бұрын

Fortunately nothing seem to be broken.

Out of all 8, I probably have the most expensive problem😭

@AbdiMohamed-by1xz

Жыл бұрын

No way😭😭😭

@gretskiauto

5 ай бұрын

Sorry bro😅

@jonstran

5 ай бұрын

Same

@nancyferrell1658

3 ай бұрын

deadass😭

@user-og9ms6wy4u

2 ай бұрын

Transmission?

Best type of content. Thank you for your positive contribution to the world! Super helpful

Great video fast and to the point.

Rattling noise Corolla 2002. With a check engine light on. Changed water pump and tensioner pulley. Still rattles on and off . Check engine light comes on every 5 to six days. Thank you very much.

Thanks man very helpful

Your video was awesome. I possibly have either 1-4 not.. 02 Kia Sedona. When you put it in gear it seems like it wants to die but it's fine in P or N. When we try to accelerate we get a clunking sound from the front an it Boggs down as it's clunking like then all of a sudden it sometimes takes off Or we just barely press the gas. Most of the time we have to put it in low gear #1 an shift upwards. #3 gear is where we drive it most of the time cuz you try an go to D- drive it clunks but not as bad almost like a chug .sry it's so long

They should give double ❤❤ for the vids like this! Now a vid on Difficulty?

well done said

Phenomenal video 10/10

Thanks... I've got doubts all of them apply to "when accelerating" condition, for example damaged shocks and leaf springs? I would think these would produce some noise on the move whether you are accelerating or not.

How would test the transmission mounts on a front wheel drive 2009 ford taurus?

I Love how You Skooled Us

Would any other problems featured in this video, other than the transmission issue, turn on the dash check engine light?

SUCH A GREAT VIDEO! 👏 SERIOUSLY! THANK YOU SO MUCH! YOU HELPED ALLEVIATE SO MUCH OF MY ANXIETY!

Tapping nose when decelerating. What do you think is the issue on my 2004 ford explorer XLT?

Mine only clunks till 40 mph then all is quiet. We have 150,000 miles on it and I know I need to shocks n struts but wasn’t sure about that damn clunking. But I will definitely check the CV joints. I hadn’t thought of those. I also haven’t had it on the hoist is some time since I’ve been batting cancer.

@KyrieEleisonMe

2 ай бұрын

Did you manage to find out what it was. Mine does exactly the same.

Hello. Questions mine 2013 ford escape sel. And makes weird sound when I accurately only after I warm up it stops lil

Please make more vids!

What about wheel bearings or tie rods?

2004 Honda Accord short ram only throws off the sensor, ive no filter in box and deleted chamber and put the pod filter on pipe that would go into the chamber. no light yet now ill run a 3ft 3 inch pipe from piping going into air box down to bottom mouth grill to get more lower cooler ram air

Thanks man ✅that temu list 😵‍💫☹️

Mine grinds on acceleration and hard to get in gear I seen my top motor mount rubber is coming apart

I have a 2004 gmc denali.when I'm at the light and I press the gas hard my truck clunks but once I'm going fast it don't make the noise.i took it to a shop,a guy takes me under my truck and shakes my transfer case up and down and says I need a new transfer case my question is this a method u can do to check if it's bad.im just wondering if he's correct because it's a pricey fix.if u have time to answer my question I appreciate it

This is a problem with the 2017 Explorer. If you quickly release the accelerator while shifting from 1st gear to 2nd gear or 2nd gear to 3rd gear, a noise will be heard from under the driver's seat. Also, when operating d->r or r->d in a stopped state, noise is made. Please help me.

So I have a Toyota Corolla 2014, it make a noise when I am accelerating sometimes like a click or something like that. ( it don’t do it all the time) or when I am using the breaks too. I was checking with the mechanics and they said there is nothing wrong with it, but idk some people told me it can be the diferencial but I really don’t know it’s a annoying noise cuz sometimes it sound and sometimes not. When they put the car up at the mechanics they were moving the tires ( the left one) and it made the same noise, they change the cv aexl but still… I really don’t know man

My 2018 MB GLA45 AMG rattles when changing gears usually from 1-3. Whenever i tap the gas ever so slightly it rattles. While driving it goes away, while braking still nothing, but with acceleration it rattles. Would you know what could this be?

The clunking only happens between 2-4 gear shifts, and can be felt within the actual pedal. Does this give any indicators?

Helpful, I think! Big thud when start moving and thought was tranny, but after watching, thinking it is more likely a mounting issue of tranny, motor, or drive train if that has a mount. Once moving, no issue with transmission shifting, noise, whatever, so vid helped me realize that. TY. 08 lincoln mkz is any thoughts. Will get it on rack to see if mount issues.

@georgenoname

5 ай бұрын

What was the issue? If u still remember

@northportfloridarealestate8664

5 ай бұрын

@@georgenoname Not sure as went away, but think is transmission as older car. Was a very hot day, and apparently when very hot or cold, need to warm up car or sometimes trans issues. I just try to drive easy with slower starts and not been an issue although likely an issue in future. Had car in a shop and they couldn't find any issue with the transmission. Good luck.

My 08 cobalt 5 speed is sounds like its knocking when i excelerate idle high and low when in neutral then dies

I have a ‘06 GMC sierra 1500. When I put it in 4x4, I hear a loud clunking/banging coming from the front end when I press the gas pedal. I replaced the hubs and CV axles and it still persists. It only does this in 4x4. When it’s in rwd it runs as smooth as can be.

@kentmartin8234

7 ай бұрын

Bushing in the difrential bracket

don’t forget to check pulleys and serpentine belt!

Very difficult Difficult Medium Lightweight Manageable 😊

I have an Audi TT 2016, yesterday I pulled away the car about 120 Mph on the motorway and all of the sudden a continuous loud metallic knocking sound appeared. I slowed down immediately as I actually thought something extremely serious has happened and eventually disappeared. Now once I'm above 60mph that continuous sounds appears always . Any thoughts ?

@prefetchmargaret2901

4 ай бұрын

Did you found what cause of it? I have the same problem.

I haven’t found a fix yet my car makes like a spoke clicking type of noise and it only happens trying to accelerate into a turn but if I roll into the turn the noise doesn’t happen and it brings resistance and not there when going faster than 40-60

@HVAC_Mechanic

Жыл бұрын

It can be difficult to say without hearing it but that sounds like a Front CV axel.

1. Broken motor mount - bad 2. Broken transmission mount - investigating 3. Broken CV axel - ok 5. Transmission failure - ok 6. Damaged shocks - fixed 8. Lose bolts or components - ok A little more $$effort$$ and I will solve my problem... Focus 2015 MT/ 65k miles.

Just got my rear bushing replaced and for some reason I hear a clunck noise everytime I press on the gas. It only clunks one time everytime I push on the gas. Any idea why this could be happening? Also I hear a whine noise. Bushing is from Z1.

@johnnysalazar7853

9 ай бұрын

Did you ever figure out what the problem was? I have an escalade with the same problem.

What's that purple thing at 0:15

My 2005 F150 5.4 started shaking and shuttering when I had accelerated too fast. My idle is smooth and it does it even when in park or neutral it feels like a motor mount with the shaking but I have a check engine light that’s on that happened at the same time. I can’t check the ODB because it has no power, so I’m baffled on what it could be. last time I had this issue it was a bad coil but my idle is smooth. It also shift gears fine when driving it’s just a constant vibration.

@brandondiego4681

8 ай бұрын

Exhaust manifold

@jeremyking3986

8 ай бұрын

@@brandondiego4681 would that make the check engine light come on? My obd2 doesn’t work, so I can’t check codes. Thank you

@brandondiego4681

8 ай бұрын

@@jeremyking3986 Yes that does happen if bad. You may have a crack in a manifold or both or a bolt snapped off and got stuck to where too much air is coming in through the crack. If you are at a stop and it cuts off and sounds sick I’d recommend you hurry and fix this issue as it will get worse to where you can’t drive your vehicle.

@brandondiego4681

8 ай бұрын

@@jeremyking3986 if you do end up working on it on you tube they only show engines getting yanked out you can take the side fender off and tire and get it from there

KNOWLEDGE

But It Is Fixable? Nothing To Trip Over?

My 05 4Runner produces a loud tick when i press the gas pedal. When I brake and then let go it also makes the same tick. Hopefully one of these is the solution.

@georgenoname

5 ай бұрын

Du you know what the problem was ?

@Isaac-df2qd

5 ай бұрын

@@georgenoname Nope. But looking at it, the rear axel appears to jerk when pressing the gas and changing gears. Could possibly be a broken linkage but not sure yet. That jerk is what produces a metallic click. Super loud too

My Honda clunks each time I press accelerator pedal after driving around for a while at a stretch. Can you narrow down the list for me based on this piece of information? BTW your quick video seems to be very useful! Great job.

@antg916

6 ай бұрын

Did you ever find out where your clunk was coming from? I feel I have the same issue. When I accelerate, there is one click/clunk sound. 1999 Honda CRV. Thanks.

@5tar5z

3 ай бұрын

@@antg916I’m getting a very small single clunk in my 2020 Acura ilx when I hit the gas. Not every time. Seems only if I’m driving 50-60kmh, let my foot off the gas to coast, then when I hit the gas, I get the small clunk.

@Mahmoud31640

2 ай бұрын

Do you know where the problem is?

@ferdoushakim4245

2 ай бұрын

@@Mahmoud31640 no. If the car is accelerated very slowly, it doesn't happen. But when you go for a quick pickup, it does. The dealer is blaming fuel quality and wants to clean whole fuel system.

@Mahmoud31640

2 ай бұрын

@@5tar5z My problem is such a problem did you discover the malfunction

I replaced the intake manifold on my 2015 Chevy Cruze LT. Now the loud clunking and ticking noise is loude. It jerks and idle high rpm an traction litght and engine light flashing fast. Can you help

@phumlanimbhamali1565

4 ай бұрын

Me too after replacing intake manifold runner control i started hearing that clunk noise

my rear end clunks/kicks and lags when i accelerate fast from a dead stop. im guessing the transmission or the diff.

@G8slide

Жыл бұрын

Hey, hows it going, i got the same problem with my car and its a rwd, did you solve the problem? If yes what was it?

@TIP01906

Жыл бұрын

@@G8slide i WAS TOLD THAT IT WAS THE 8 TO 4 CYL KNOCKDOWN THAT MESSES W THE TRANS AND THERES AN ODB PLUG CONNECTOR (FIX) ON EBAY FOR ABOUT $1OO. INFO WAS FROM MY LOCAL TRANS MECH I HAVENT GOT IT ,

@oscarsaenz3829

7 ай бұрын

What was your issue?

@toddstory7614

7 ай бұрын

Find the problem yet?

Hello, I have a Ford focus 2015 and it rattles when I accelerate but I can't accelerate all the way. It only goes up to like 25 mph when I gas it doesn’t do anything

@phumlanimbhamali1565

5 ай бұрын

Same problem as mine Focus 2010

It can also be the starter teeth worn out or flywheel

I have 2019 infinity qx60 when I’m stop traffic lights or stop sign I hit gas panels I hear the clucking sound after car running the sound is gone the sound coming just I hit gas panel what is problem?

@Raideradamn

29 күн бұрын

Did u figure it out.im having same problem

What could it be if it only does it when you accelerate hard. I can push the accelerator 75% and get up to speed no problem. Smooth no noise. Soon as I push on the accelerator 85-100% I get a grinding down the middle of the car/ arm rest area. It's a all wheel drive. No codes. All new brakes and rotors and tires.

@wrapz1k256

9 ай бұрын

I have the same problem

@61frogfoody

8 ай бұрын

is it a weird rattle grindy noise i get that to trying to figure it out

@djangodanomad9781

8 ай бұрын

@@61frogfoody it's the carrier bearing on the drive shaft. I found one on Ebay for $45 and had it installed for $200. She drives like a dream.

@61frogfoody

8 ай бұрын

Looked it up mine doesnt sound like that it mostly just sounds like somethings ripping when accelerating only happens at high rpms sometimes it doesnt if I already warmed it up

@fullerroberts4697

7 ай бұрын

Most likely a front/rear diffitental, that’s trying to put all the torque to the wheels. Most on vehicles with V6/V8/4T

My front left side only pops when I turn fully to the left side would that only be the left cv axle?

@HVAC_Mechanic

Жыл бұрын

Noises when turning often is the CV Axle, but it can be other things. I would examine the upper and lower control arms and other components at the wheel. If they look good, then it is likely the CV Axel.

@flabiobasurto5167

Жыл бұрын

@@HVAC_Mechanic what if the cv axle is looking good?😂

@brainwin6881

2 ай бұрын

@@flabiobasurto5167tie rod end

my car makes a clunking noise when i let off the gas? what can cause that?

@TyyzhenTao

4 ай бұрын

Mine too

@jamieteague5988

3 ай бұрын

Whats the issue mine does same if i go on and off accelerator while driving theres a clunking noise

Surprised 0 mention on lifter valves

mine makes the clunking noise when i go from p to d and vice versa, or when i accelerate there’s a small half second delay and clunking sound

@c0smicc4nc3r4

10 ай бұрын

ever figure it out?

@onezshul

9 ай бұрын

@@c0smicc4nc3r4sounds like a mount or cv axle

@brainwin6881

2 ай бұрын

Driveshaft slip yoke

I have a ticking noise that u can hear at a lower speed and it will go away when at a high speed. Anybody has any idea of what it could be?

@61frogfoody

8 ай бұрын

pebbles in the tire tread

Oh great,i have to replace all 8.😂

Mine only clunks for a second at like ten mph right when it first or second cold start doesn’t happen when heated up

@justriley9157

Жыл бұрын

Same

@boxing4life410

Жыл бұрын

@@justriley9157 did u ever figure out the problem mine sounds like a rock or some hitting the wheel well then sometimes it’ll be in like the front middle like a slight clunk noise but goes right away and it don’t shake the car or none

@lukeharris-shaw5986

Жыл бұрын

I have this problem too can anyone help?

@jvelazque005

Жыл бұрын

Same

@sportzzstoryzz1281

Жыл бұрын

@@jvelazque005 try a oil change

What I hate most is see a video, ask a question and the person who created the video never answer. Why make a video then? My Kia soul 2012 has 69 K miles, all components should be fine. once I move back or front it make a noise like Klunk. Sway bar link are new, struts are news, sway bar bushing new, even new lower arm control with ball join. Do you think could be Bolts and nuts been tighten without the car seat down on the floor? like those people recommend tighting the bolts with the tires on the floor?

@jackMmma

Жыл бұрын

Cry

@khalilyounger519

Жыл бұрын

Uhhh he answered your questions with what’s in the video🤡

@dearymcleary

8 ай бұрын

Silly request. People don't have time to answer all questions.