That thing is an absolute deathtrap, I like it!

You got all the guys in the motorized bicycle world grinning with this build man. Good work man.

@theyz105

3 жыл бұрын

Shittt, this man even got people in the dirtbike community grinning with this build my guy! Haha

@mozezcen-valley7555

3 жыл бұрын

It's because all the motorized bike guys don't want to spend over $1,000 on their engine but would easily sell a China engine kit with a few hundred dollars of upgrades for a thousand

@novajaylen5296

2 жыл бұрын

I guess im asking randomly but does anybody know a trick to log back into an Instagram account? I was stupid lost my account password. I appreciate any help you can offer me

@vincenzogael5483

2 жыл бұрын

@Nova Jaylen Instablaster ;)

@jonathanwilson1380

2 жыл бұрын

@@mozezcen-valley7555 whomst, yea some are like that but in reality there are other factors like clutch assembly and bearings, i had a 130 dollar engine throw a bearing into the chamber, yea a thousand dollar gas bike engines overpriced but not all are scams, also crank ballancing, hard to do, most dont, high end ones do

Fastest I’ve ever been on a bike was 40mph down a massive hill on my red line as a kid and that was insane, this on the other hand is absolutely insane beyond words

@UFOBUILTCO

4 жыл бұрын

Cole Schowe Hahahah it’s quite the experience I must say !

Wow, the bearings in that front wheel hub are probably cherry red hot, i hope they don't cease up on you any time soon, nice build and good luck👍.

@UFOBUILTCO

4 жыл бұрын

Scott Conger I did a thing or two! That’s why it held up well 🤙 still room for upgrades

@saved_yet_so_as_by_fire

4 жыл бұрын

@@UFOBUILTCO sealed bearings?

@lukewhetzle831

2 жыл бұрын

@@saved_yet_so_as_by_fire probably ceramics

I love the way your girl giggles when you fly by. Sweet assed bike...

@BUILTINRESPECT

3 жыл бұрын

Hahahahah i had to repeat 🤣

Dude that’s one sick build. I’ve seen a lot of wicked bikes but that takes the gold bro. Banging gears on a ktm beach cruiser. And it water cooled! Bravo 👏

That's crazy I would never trust those speeds on a huffy frame nice build do.

@nickhersheys2706

4 жыл бұрын

Aaron Davis It still proves a point. Huffy is not as bad as people think it is. It is a pretty tough steel frame. I'm not saying you go crazy and ride at 70+ mph but it surely will hold well at 35 to 40 mph

@bmx2026

4 жыл бұрын

I would, look at those tires man. * forgot the comma for the nerds.

@tedpaszko8274

4 жыл бұрын

Bearing in the wheels would fall apart

@zeke7515

4 жыл бұрын

@@tedpaszko8274 Right? I'm sure the frame is the strongest component on that bike.... those tires, wheels, and brakes would have me concerned.

@miguel360kmc

4 жыл бұрын

Huffy has amazing frames that are tried and true! And are overlook bye "snobs" Wheel bearings them are NOT huffy rims. But if they was you would just swap them out every 100 miles or sooner. Have no idea how the rear sprocket is mounted yet its not a rag joint not a adapter doesn't look like a disc brakes hub could be. Or could be a flip flob hub modded idk but them hubs front and back are very nice non-huffy hubs

This video appeared randomly on my recommended... A year and a half later I am balls deep in motorcycles/motorized bikes etc... I always have been a carfan but this made me a motorcycle fan also ! THANK YOU

@UFOBUILTCO

3 жыл бұрын

Haha love reading stuff like this man🤙! Glad I’m the reason why you wanted to build one of these crazy machines haha

That thing is crazy fast considering that it's only a 65 cc engine. It probably wouldn't be a bad idea to get some disc brakes on both ends of that thing as well as throw on a bit of motocross gear just in case shit goes sideways. But kudos for building this little project and a big part on the back for having big enough balls to ride your creation flat out.

@UFOBUILTCO

4 жыл бұрын

Mike Bell I totally agree with ya!! STAY TUNED😎🤙

I see a death wobble video in this dude’s future.

@EuroTrashTV.

4 жыл бұрын

😂😂😂

@vjscrx

4 жыл бұрын

😂😂😂😂😂😂😂😂😂

@heavystarch100

3 жыл бұрын

I don't because he built it right!!

AMAZAZINGG!! 2 thumbs up...

HE HAS DONE IT. PURE GENESIS 76MPH, GREAT JOB

Man that thing is awesome! You are a brave man, doing 75 mph on what is basically a bicycle, with tiny little wheel bearings and the little caliper brakes! Hard to believe the wheel bearings don't just burn up and go to pieces. They're just tiny little BB's in there you know! Anyway, very very cool bike, that's really the coolest thing I've seen in a while. Bike looks great too.

@TrillNaga

2 жыл бұрын

Hell yea, Those wheels aren’t built to support those speeds.

@drewthafooimakebeats4425

Жыл бұрын

I had one tear the engine off and threw me over the handle bars like a action movie I landed on my feet but I am very athletic I did a flip about 15 feet in the air and had time to think if I don’t land on my feet I’m gonna die the momentum made me fly again that was wild

@KvltKommando

4 ай бұрын

​@@drewthafooimakebeats4425 Sounds crazy enough to be real, only cause I've had a similar crazy experience where I somersaulted with a mountain bike between two parked cars, held onto the bike despite the shock of rolling on my head and back with the weight of the bike and landed upright seated on the bike and managed to somehow not ding up the cars

The man, the myth, the legend ...

Best of both worlds. Joy ride like a motorcycle. When gas is gone pedal it to the nearest gas station....love it.

Awesome build! Get some good brakes on it.

@Canadian_Craftsman

4 жыл бұрын

Omfg i was like duuuuuude DISK MFING BRAKES 🤣 HAHAHA

@divine308

4 жыл бұрын

If I mounted a engine on my road bike which is already very fast pedaling and with the motor I might be going like 100 +mph It would take about a mile for the brakes to stop me and I would have to get new brake pads and they might catch on fire because the friction of stopping at those speeds.

Speechless, y'all. I wish you a long life...

I've ridden most anything with 2 wheels . Assembled a couple PK 80 kits . You already know a smaller sprocket would make this bike hit 100 ! Is this a grim reaper , or a rim gripper ??? Beautiful !!!!!!!!!

Bruh .... that's crazy 😂 Her reaction to the flyby was great

Super cool build bro one of the best I’ve seen so far thanks for sharing it

wow that bike is insane, I think I would be to scared to go 76 mph on it though.

Screw the haters saying this is cheating when it comes to motorized bikes 😂 this thing is awesome and the gearing gives it Soo much acceleration! Other motorized bikes will hit those speeds in only 1 gear tho 😂

@robspear03

4 жыл бұрын

Welp, they are ALL illegal, so...

@froggersgarage5127

4 жыл бұрын

@@robspear03 not in my state

@Canadian_Craftsman

4 жыл бұрын

@@robspear03 my 212cc has a 49cc sticker 🤔 that's totally legal now 🤣

@kushpaladin

4 жыл бұрын

@@robspear03 theyre not illegal ? just gotta keep it under 25 mph in the bike lane. other than that you will need a m2 license

@kenshi600

4 жыл бұрын

@@kushpaladin 25mph is soooooooooooo slow , I rather walk😅

That’s one sick beach cruiser !! Thanks for that I’ve been wanting to do something like that since I was a kid

AWESOME.......just AWESOME

@UFOBUILTCO

4 жыл бұрын

IceStone69 hahah THANK YOU 🙏 🤙✨

I just finished my build, thing flys like a rocket

I love the sound of two stroke

@UFOBUILTCO

4 жыл бұрын

K.G Gamer its a little beast!

@niel67354

4 жыл бұрын

Music

Awesome build!!! Looks like tons of fun.

Awesome build. Nothing sounds better than a 2 stroke.

You’re definitely my mentor 👍🏿 I’m building a bike Huffy with a 125cc engine as you’ve inspired me with your build, keep up the Great work bro 👍🏿👍🏿👍🏿👍🏿👍🏿👍🏿👍🏿

@uzziahmajor3788

2 жыл бұрын

U better post that

@NeoDarkness

2 ай бұрын

update?

Sick build brother scary but sick lol

Crazy fast! Looks cool too 😎

added another wishlist. super cool

I would absolutely love to see that bike go down a racetrack OMG!

@UFOBUILTCO

4 жыл бұрын

JEFFREY ASH that could be a possibility!!! Thanks 🙏

“That was pretty good” that was insane haha

@UFOBUILTCO

4 жыл бұрын

Rick Sauce hahah thank you!

Man I love ur build!! You changed the game that's for sure

Nothing sounds better perfect tuning

Very cool! BUTTT DISK BRAKES MAN, you are not stopping..

crisp AF

Cool very cool and I never liked this type of motorized bicycle stuff but this is just icing on the cake .

@UFOBUILTCO

4 жыл бұрын

kenshi600 hahah I felt the same!

You are nuts! Never imagined a bicycle that freaking fast!

@UFOBUILTCO

3 жыл бұрын

Thanks man! It’s for sure crazy haha . Check me out on Instagram also ☑️

Brakes (meh) i got a helmet & a smooth straight road & a giggling gf your all good👍👍👍

@UFOBUILTCO

4 жыл бұрын

henry R. Hahaha you got that right 💯🤣

@lilorbielilorbie2496

4 жыл бұрын

henry R. We all know that brakes are for quitter's.

Installed the sprocket and that was that lol that's like the hardest part! (Getting perfect alignment with front etc)

@UFOBUILTCO

4 жыл бұрын

Widget222 glad you realize the work that really went into this build! Wasn’t easy! Don’t forget to subscribe for all the cool future builds

@thooke222

4 жыл бұрын

@@UFOBUILTCO subbed ✅

@UFOBUILTCO

4 жыл бұрын

Widget222 thanks for the support ! Means a lot !

YOU THE MAN BRO!!!

Dude that's wicked!!! I love it..

@UFOBUILTCO

4 жыл бұрын

James Rock THANK YOU 🤙Don’t forget to subscribe for all the cool future builds and upgrades to this one

Wow incredible machine! But dude you need some disc brakes, stopping almost 80mph with rubber block v rim brakes must be really scary😁⚠️😯🙈

@UFOBUILTCO

4 жыл бұрын

PD Tech hahaha definitely the disc ! Don’t forget to subscribe for all the cool future builds and upgrades to this one

how could this get any dislikes lol sweet bike!

@talentedt4378

4 жыл бұрын

That a sick asss bike best ive seen online no lie get them brakes cause tho speeds do kill

That thing is bad ass! nice job man!

Insane!!!! I Love it

Sure makes a difference when you got gears on it. Hope your tires are up to the speed. Nice job.

@UFOBUILTCO

4 жыл бұрын

Ken tires seem to hold up fine! And the gears makes it all the fun

@race-all

4 жыл бұрын

Cool. What brand tires & wheels do you use? I'm looking for bike running gear. It's not so much gears it's the chain used on those gears. I've had them come apart before.

nutz

65! Been wanting one to test power.. for two stroke! Killer build that rips( rides!). Although you should tell your secrets. Which as a fellow KZreadr knows.. I see tire wear from the chain and such but KZread Secrets stay hidden but when you reveal them comments / subscribers can really help you out. Great built!

@UFOBUILTCO

4 жыл бұрын

Remington Hawes no tire wear from chain what so ever 🤙 I wouldn’t ride it if it did haha

Bro this is unbelievable. Nice work

Arnt you worried about those bearings in those stock wheels? Needa to be beefed up bro, that could be a fatal problem.

@sisdavid

4 жыл бұрын

they barely have any grease from the factory.

@LightGesture

3 жыл бұрын

Could have different bearinga already. Depends what grease you pack them with, too

@UFOBUILTCO

3 жыл бұрын

They are now

Dude i dont know if the bearings in a bicycle are goona hold up long at that speed. But thats badass

@UFOBUILTCO

4 жыл бұрын

James Jenkins they do pretty well just need regular maintenance but I’m not going 76 every time I hop on it haha I got blend in at 25mph

Dude that was awesome. Thats freakn moving on a bike

Very respectful job. Greetings from Australia 🇦🇺 👍

It sounds like a shifter kart

He should name his bike the death cycle 😬

Holy smokes!!!!! That's Bad-ass!!!

I bet the sketch makes it even more fun

76mph with no suspensions! 😂

@WestleyBates

4 жыл бұрын

and thin ass tires

@brianjacobsen5762

4 жыл бұрын

One pot hole. That you didn't see. And your done.

@divine308

4 жыл бұрын

Most road bikes which are designed for speed dont have neither this either

@georgebamber6871

4 жыл бұрын

Someone in the tour de France got to 88 mph down a hill on a road bike

@escapetherace1943

3 жыл бұрын

@@georgebamber6871 doesn't make it any less suicidal to be fair....

I think I would want a Worksman frame or something with non bicycle tubing & maybe some drums with 11 gauge spokes I wouldn’t trust that off the shelf bike gear lol

@robspear03

4 жыл бұрын

Not in the least. This seems irresponsible, neat, but uber dangerous.

@Youtubeforcedmetochangemyname

4 жыл бұрын

That back rim isn't an off the shelf part judging by the look of it bit appears to be a pitbike hub with some sort of 29 in rim and I'm sure the spokes are pretty hefty look at it compared to the front

@st.paulmn9159

4 жыл бұрын

It’s a Huffy Not even the cruiser frames from the 40s have thick enough tubing to handle 15-20hp.

Siiiiick build man.

Awesome build! Only thing is are the bearings and hubs going to hold up!! Don't let that awesome bike kill you!! Great job 👍

4:40 how he changes gear like sonic the hedgehog XD

@UFOBUILTCO

4 жыл бұрын

BeLRus IndustrieS 😂😂 glad you said it because that shit cracks me up also!

WOW !!! THis is incredibly amazing man ! 😎👌. I build mine hybrid power, BUT on a water cooled "big bore" KTM 65 (clone) -NOT the shifter type engine like yours-, I built it with a shift kit from sick bike parts that I modified to accommodate that beast and a front wheel 3000 watts motor hub, I used a GT LTS 2 frame to assemble the components on it. *The electric kit is only for legal reason (Stupid libtard laws in Canada). I built my bike not for racing in my case (I geared it as low as possible with the shift kit), but for the sheer immense power that the KTM 65 (big bore) engine can give me for climbing up steep hills very aggressive fast, in a relatively small footprint and incredibly light weight compare to any 4 strokes or electric motor combined !!! The engine is so powerful, that my back wheel tend to push my bike sideways !!!

@thelongranger55

4 жыл бұрын

Nickael7 can u send the link to ur clone engine , I want a shifter engine like his from a true dirt bike but I don’t wanna buy a Ktm to rip it apart , I’d rather just ride the Ktm haha , but I do wanna build a nice shifter gas bike one day , one way or another

@Nickael7

4 жыл бұрын

@@thelongranger55 DeNArdis competition engines, they sell the clones, they come in 3 flavors: 50cc air cooled, 50cc water cooled and 65cc water cooled. Note: These are not shifter engines, this means, you will need to buy a shift kit from sick bike parts and do some modification on your own.

@FarmerFpv

4 жыл бұрын

My 18kW motor is nowhere as big as a 65cc ktm 2 stroke, Don't know what electric motors you're looking at which are bigger but mine can out-accelerate any petrol engine bike. There are even smaller builds like the guy fpvlee on KZread with a QS 250 50H motor that will out-accelerate this bike and any other motorized bike, heck it kills most cars and petrol motorcycles. I love my petrol bikes, but electric is much more powerful than what we can do using petro on these bikes by a big margin especially when it comes to acceleration.

@Nickael7

4 жыл бұрын

@@FarmerFpv At high speed electric motors don't have powerband. You need massive battery packages to keep your 18,000 watts (24.29 hp) motor keep on rolling. Putting easily 200 lbs on your bike frame, which is a no-no ! BTW, you're comparing a measly 25 lbs weight 15.6 hp KTM 65cc vs a 24.29 hp motor with a massive battery pack. BTW, I check "QS 250 50H motor" not impressive at all vs a 2 stroke dirt bike of the same magnitude !!! Check this: watch?v=pyYwrDNpxP0 And I forgot, you can nitro-methane and/or turbo a 2 stroke engine and still wreck any electric motor at any time for a relatively lower weight !!!

Sick man!!! Good work

Holy crap, that looks terrifying! Awesome build! Wouldn't mind having one for myself although maybe not so scary!

That’s a crazy build my man...you gotta get a real brake on there ASAP that is way too dangerous

@UFOBUILTCO

4 жыл бұрын

Wide Open Throttle I agree man! Stay tuned ! 🤙

@JosePuchoToro

3 жыл бұрын

@@UFOBUILTCO want to sell it??

So what's the secret with the rear sprocket... I need a build like this in my life asap

@mattdavis5981

3 жыл бұрын

Bolted to brake disc

@joshuamaas5380

3 жыл бұрын

I just use a little adapter that bolts around the actual hub

That was awesome!

Sounds dope af

Zeda who 2 stroke stuffing who

4:56 laughing hiena

Sick af🤘🏻

That is the sickest thing I've ever seen!!!!

@UFOBUILTCO

4 жыл бұрын

The UnSeEn hahah thanks man!

This is the road coming out of radiator springs If you know what I'm sayingggg

@UFOBUILTCO

4 жыл бұрын

Jan Ruiter 😂😂😂 spot on with that one

And I know it seems cool to run no chain tensioner, but you will soon find out that you need one.

@UFOBUILTCO

4 жыл бұрын

Seedless Grapes stay tuned. Like I said this is only the beginning

@seedlessgrapes2605

4 жыл бұрын

@@UFOBUILTCO And trust me. I'm not a hater. I love this bike and you definitely have writing skills. I could tell right away when you're going through those gears smooth and impressive and it just sounded so clean.

@seedlessgrapes2605

4 жыл бұрын

@@UFOBUILTCO Also, I did not know it was an old Huffy. I saw the Rusted seat but didn't put two-and-two together cuz you had painted it so nicely and old Huffy is actually a really solid bike. So I take that back. Thing will never fail or break. The frame is basically indestructible.

@UFOBUILTCO

4 жыл бұрын

Seedless Grapes none taken man everyone has opinions including me! I love hearing the feedback! And yessir its a classic huffy! The metal is pretty think and welder pretty well when I was welding the engine mounts didn’t warp or distort

That's frickin kicken!

That's an awesome build you earns yourself a new sub with this

Should i ask if that's street legal ? :'D

@neilross9867

4 жыл бұрын

No. I think you already know the answer. You dont need to ask.

Nice, but I would give braking a higher priority that "someday." Standard caliper brakes may be fine for 25 MPH but triple that? No...

@electricdeckhead3083

4 жыл бұрын

a speedway racer says no ! lol

@UFOBUILTCO

4 жыл бұрын

Improvements to be made yes. BUT that’s the beauty of this to me. I’m not flying at 76mph every time I ride this thing. 20-25 is where I’m usually at on a casual Sunday

That is seriously awesome! Waiting for someone to do this! But damn idk if trust a bike frame going that fast Hahahaha killer !

You're a mad man!!! Killer job on that build g fr fr💪💪

@UFOBUILTCO

4 жыл бұрын

rd95stang thank you 🙏 appreciate that man

Pull up to a motorcycle on a bicycle... Wanna race? 😂

@UFOBUILTCO

4 жыл бұрын

Sauce Junior hahaha I’ve been there already

Wait Wait Wait Wait... Its 76MPH AND NOT KPH!? WTF I JUST REALIZED 😳

@UFOBUILTCO

4 жыл бұрын

Holzwurm _HD yessir MPH

@briankerr5581

4 жыл бұрын

35 mph gas bike?

nice looking bike you have done a neat job on that i love the 2 stroke sound I have a mountain bike on here with a turbine engine on I got to 65mph pushing air ha

Super Dope Ride Mate. 👌

it's a Huffy

@charliepatterson9321

4 жыл бұрын

If yer not first yer last :-)

those tires, rims and frame can’t take that stress. Never that brake set up. That motor puts out over 10hp

@UFOBUILTCO

4 жыл бұрын

Taco Taco you’d be surprised! Stay tuned man trust me !

@kennisjohnson7853

4 жыл бұрын

Can't or shouldn't lol

@andrewjb05051998

4 жыл бұрын

@Nimbus Nimbus give it time, something will give out

@tacotaco6577

4 жыл бұрын

Seriously tires ,rims & brakes all have speed ratings for your safety not so you can look cool with giant scar across your face. I wouldn’t want to see that pretty face ruined because of a lack of safety. Get smart or end up in the tribute section looking like a foul

Wow! Nice work man!

I have a 76 shortbed 4wheel drive same color as your p/u! Came here for bike ideas and subscribed! Skinny love rips! Out of gogo juice! Yea!

That chain is way too tight you’re ruining the bearings in the motor

You cheated. You were suppose to build a China doll and hit 75 mph. With only one gear.

@thelongranger55

4 жыл бұрын

Troy Collins haha I totally agree he cheated , but this is still the dopest bicycle build on KZread so far for me , but if we are going to hit 70mph + we really need to find a frame and wheels / tires that are well suited for it , my little stock china kits with minor port work can reach almost 50mph for me and I’m scared to even do that because I don’t wanna blow my nuts off when the piston explodes through the top of the cylinder head right into the babymaker

@troycollins4051

4 жыл бұрын

@@thelongranger55 I have been over 55 MPH on one. I had to turn soon so I let off. It was a buddy's bike. On a Walmart bike, stock wheels and tires. 10t and 28t drive gear. Looked completely stock minus the big expansion chamber. It hit 50mph fast!

@thelongranger55

4 жыл бұрын

Troy Collins hell yeah bro I loves these engine kits , I love to tune them

That is absolutely intense on a bicycle!! 🤙

That's awesome my dude

That's cool 👍 must be a scary ride at 76 mph on a bicycle 👍😁✌️

That is so cool ! 👍

beach cruiser sick AF bro

Omg that's madd man good build