thank you very much for clear directions and clean camera footage. This information was what i was looking for...

@TheTrothKeeper

3 жыл бұрын

x2 TY sir!

this brings me back to transmission apprentice days. good ol' times I want to go back to.

Great video I appreciate you .

Great video.

How do you replace shift solenoid for code p2714?

Do you know symptoms of a bad pressure switch.. and would you have a cel light on

At 3:36, that lever... I broke that tryin to get my trans pan out on my 2014 sierra 5.3 4x4. I think it's pulled down. So what's gonna happen if I just replaced the filter and bolt everything back up and let it ride? Because it seems like you still need those torq bits to be unbolted for the valve body to drop

I have a problem shifting third to second roughly will that help replace valve body chevy express 3500 2018 6.0l

So where is the shift solenoid located at for this transmission ?

Do you need to reset after replacing it.

What’s the torque foot per pound

So, I got the thing apart and replaced my pressure switches but I cannot seem to press the connector back over the wiring harness without forcing it? Help...

@Spahi77

2 жыл бұрын

See Chris response above ....your SOOL

Thank you for the excellent video. Is it really that easy ?? I will be tackling this project next weekend.

@asylummotorsports5997

2 жыл бұрын

It's pretty easy. I hope all went well with yours.

WHERE DO YOU SEND IT FOR REBUILD?

Hey is this for chevy camaro 2010

Hello sir, and thank you very much for this clear video. I followed your directions but now my 6l80 is very sluggish and it seems to be stuck in 3rd gear. Any info on that issue? Thank you.

@Spahi77

2 жыл бұрын

Doubt he is answering at this point ...lol

I have a 2011 Chevy Suburban 1500 LT. The code is P2723 pressure control solenoid Valve 5 stuck off I was told I would have to replace my whole transmission module. Was thinking maybe it could be more simple. Hope you can help me

@Urbanmsllc

11 ай бұрын

Hey there. I have the same issue on my 2015 Tahoe LT and was told the same. What did you end up doing if I may ask?

Dear sir, could you please advise. I have stock 6L80 on my 2011 chevy camaro SS. I found UPDATED Valve Body Spacer Plate w/ 8 Check Balls 10-Up. Can I use it on my stock car?

@asylummotorsports5997

2 жыл бұрын

Yes.

@Daltonm234

Жыл бұрын

Where did you buy this from and how much? If so can you please send me the link pressure solenoid 5 is bad in my trans and need to buy the part

So Getaway cars rebuilds them? I can seem to find them online, do you have a link

@asylummotorsports5997

3 жыл бұрын

getawaycarz.com/

What am I supposed to do when the tcm clip is stuck open???

@moldypizza8808

4 ай бұрын

Lmao

Hi I have the 6l90 in my truck. My question is , the plastic pass through connector......does it have to be removed before the valve body will drop out.....or will it come out as is

@asylummotorsports5997

2 жыл бұрын

It will come out as is, you just have to wiggle it.

80 and 90 are the same? 🤔

Hi I just replace my valve body I follow all the steps put it back but now my transmission is not shifting the light of the dash dont change to any rear neautral or drive do I need to do a reprogram? Please help me

@hussain8820

Жыл бұрын

yes

@eronic404

Жыл бұрын

Have you found a solution?

@shadow6958

4 ай бұрын

Same issue did you figure it out?

What is the part numbers for the all shift solenoids and TCC solenoid and where to get them?

@asylummotorsports5997

2 жыл бұрын

The solenoids cannot be changed, they are part of the THECM.

@Vettespeed

2 жыл бұрын

@@asylummotorsports5997 oh that’s a bummer I’m pretty sure my solenoids are bad

@cv2588

2 жыл бұрын

@@asylummotorsports5997 does this include the pressure control sensor solenoid?

@Mr2pac2000

9 ай бұрын

@@asylummotorsports5997 is the pressure control solenoid in this valve body?

can you remove techum without removing valvebody ?

@asylummotorsports5997

2 жыл бұрын

No sir, you cannot.

What are the torque specs of the 6 bolts on the valve body?

@edgarosorio215

4 ай бұрын

18ft lbs

When should you change this?

@bluej333

4 ай бұрын

Your VB only when it needs it

FROM THE BOTTOM OF THE TRUCK IT LOOKS PRETTY NEWISH, , IF THATS THE CASE , ITS A REAL SHAME WE HAVE TO CHANGE OUT A VALVE BODY, INSTEAD OF COMPUTERS BEING A BENEFIT TO US ITS ONLY BENEFIT TO THE DEALER AND THE SHOPS, DAM SHAME $$$$$ .

Ur gonna sleep outside the house because of that camera man joke