Interesting video, thanks. Yes Ekahau survey and analysis tools are pricey! It's a small market. If it was just WiFi signal strength & spectrum congestion you were looking to survey, a 6GHz WiFi client is a cheaper option. It's when you are trying to track down non WiFi signals that are or may be causes for interference that it's nice to have general spectrum analyser tools. Looks like your software could turn the Hack RF one into a cheaper version of a signal hound BB60 real time analyser - these do 20Mhz real time FFT and swept analysis for wider bandwidths. These cost around $3k US last time I looked, but do have pretty accurate RF front end which of course is sacrificed with the cheaper device.
@Sa1985Mr Жыл бұрын
Very cool. The thing you pay for with Ekahau is the profiling of a potential wireless deployment - it'll take the really basic frequency profiling then overlay over building plans, modelling walls, materials and APs and topology. The actual RF spectrum analysis is pretty basic - you're probably further along.
@user-op1nb7fq6s Жыл бұрын
Good video! Very interesting project)
@swilky284 Жыл бұрын
Nice Work!
@johnpwmcgrath Жыл бұрын
Great video!! What headset are you wearing?
@user-kv2ky5py7l Жыл бұрын
It is beautiful and efficient Did you use a library for 3D Spectrum? Or did you create it yourself? I want to use it inside a project
@sylare_46748 ай бұрын
Wooow that's insane, we'll done
@auzzierocks Жыл бұрын
hey mate, i just upgraded to a unifi U6 pro. holy shit the PHY rate is fast! 2402 mbps just off 2x2, so i can finally get gigabit file transfers over my LAN
@PerpetualManifest9 ай бұрын
what an incredible app!!!
@TallPaulTech
9 ай бұрын
It will be one day when I finish it
@MelroyvandenBerg
5 ай бұрын
@@TallPaulTech one day.. ;P
@ArclampSDR Жыл бұрын
very interesting
@e-rikawestraya48704 ай бұрын
Hello Paul, very interesting project and I do hope that you finish and release a Spectrum Analyser app. FYI... the Australian Communications and Media Authority (ACMA) is currently (March 2024) considering the use of the upper part of the 6 GHz spectrum - for which there are competing interests from wireless telcos and RLAN (ie. WiFi7) interests, manufacturers etc. It's not clear at this stage which interests get access to the spectrum and there are incumbent users in the band (eg. Telco microwave links and broadcasters Television Outside Broadcast (TOB) itinerant links).
@TallPaulTech
3 ай бұрын
I do hope I finish it too!
@fitybux46649 ай бұрын
Internal 25MHz crystal, or something better?
@walt Жыл бұрын
Could you add a downconverter to drop the signal below 6ghz? But then again you still can't use that range in AU anyway 🤷
@steven-george
Жыл бұрын
I was thinking exactly that, use an LO. This is what satellite dishes use to convert the 11-13GHz down to sub 1GHz frequencies.
@user-kv2ky5py7l Жыл бұрын
Hello Thanks for posting information about RF hacking capabilities I wanted to know if the first program is available to the public? Or is the 3D spectrum library available to the public? Thank you
@TallPaulTech
Жыл бұрын
I never really finished it to be honest.
@user-kv2ky5py7l
Жыл бұрын
@@TallPaulTech It is beautiful and efficient Did you use a library for 3D Spectrum? Or did you create it yourself? I want to use it inside a project
@chuxxsss Жыл бұрын
FFT Fast Fourier transformation, may want to expand it, just for people who don't know.
@TallPaulTech
Жыл бұрын
If I wanted to expand it I would have. Should I explain RF, "gig", and all the other abbreviations I mentioned? I know what you should do... and it involves your hat.
@stevebor1
Жыл бұрын
There are already many videos on this including veritasium
@alonzosmith6189 Жыл бұрын
I wish I understand what you are doing..
@TallPaulTech
Жыл бұрын
Well as I was always told, wish in one hand, shit in the other, and see which gets the fullest
@GeorgeOu6 ай бұрын
Is this due to a bandpass filter?
@TallPaulTech
6 ай бұрын
Which bit... what?
@GeorgeOu
6 ай бұрын
@@TallPaulTech You showed that the signal tapered off beyond 6.3 GHz as you reached into the 6.5 GHz range. I'm wondering if this is due to poor receiver sensitivity above 6.3 or if there is an internal filter that blocks over 6 GHz.
@TallPaulTech
6 ай бұрын
It would be it's signal path performance I'd say. The bandpass filter would just be the normal 20MHz one (I'd imagine) which is 20MHz at any frequency, because it gets mixed down by its LO to be the tuned frequency.@@GeorgeOu
@adamdavila Жыл бұрын
Why does Australia limit Wifi 6 frequencies? I thought radio waves traveled the same even when you’re upside down.
Пікірлер: 32
Interesting video, thanks. Yes Ekahau survey and analysis tools are pricey! It's a small market. If it was just WiFi signal strength & spectrum congestion you were looking to survey, a 6GHz WiFi client is a cheaper option. It's when you are trying to track down non WiFi signals that are or may be causes for interference that it's nice to have general spectrum analyser tools. Looks like your software could turn the Hack RF one into a cheaper version of a signal hound BB60 real time analyser - these do 20Mhz real time FFT and swept analysis for wider bandwidths. These cost around $3k US last time I looked, but do have pretty accurate RF front end which of course is sacrificed with the cheaper device.
Very cool. The thing you pay for with Ekahau is the profiling of a potential wireless deployment - it'll take the really basic frequency profiling then overlay over building plans, modelling walls, materials and APs and topology. The actual RF spectrum analysis is pretty basic - you're probably further along.
Good video! Very interesting project)
Nice Work!
Great video!! What headset are you wearing?
It is beautiful and efficient Did you use a library for 3D Spectrum? Or did you create it yourself? I want to use it inside a project
Wooow that's insane, we'll done
hey mate, i just upgraded to a unifi U6 pro. holy shit the PHY rate is fast! 2402 mbps just off 2x2, so i can finally get gigabit file transfers over my LAN
what an incredible app!!!
@TallPaulTech
9 ай бұрын
It will be one day when I finish it
@MelroyvandenBerg
5 ай бұрын
@@TallPaulTech one day.. ;P
very interesting
Hello Paul, very interesting project and I do hope that you finish and release a Spectrum Analyser app. FYI... the Australian Communications and Media Authority (ACMA) is currently (March 2024) considering the use of the upper part of the 6 GHz spectrum - for which there are competing interests from wireless telcos and RLAN (ie. WiFi7) interests, manufacturers etc. It's not clear at this stage which interests get access to the spectrum and there are incumbent users in the band (eg. Telco microwave links and broadcasters Television Outside Broadcast (TOB) itinerant links).
@TallPaulTech
3 ай бұрын
I do hope I finish it too!
Internal 25MHz crystal, or something better?
Could you add a downconverter to drop the signal below 6ghz? But then again you still can't use that range in AU anyway 🤷
@steven-george
Жыл бұрын
I was thinking exactly that, use an LO. This is what satellite dishes use to convert the 11-13GHz down to sub 1GHz frequencies.
Hello Thanks for posting information about RF hacking capabilities I wanted to know if the first program is available to the public? Or is the 3D spectrum library available to the public? Thank you
@TallPaulTech
Жыл бұрын
I never really finished it to be honest.
@user-kv2ky5py7l
Жыл бұрын
@@TallPaulTech It is beautiful and efficient Did you use a library for 3D Spectrum? Or did you create it yourself? I want to use it inside a project
FFT Fast Fourier transformation, may want to expand it, just for people who don't know.
@TallPaulTech
Жыл бұрын
If I wanted to expand it I would have. Should I explain RF, "gig", and all the other abbreviations I mentioned? I know what you should do... and it involves your hat.
@stevebor1
Жыл бұрын
There are already many videos on this including veritasium
I wish I understand what you are doing..
@TallPaulTech
Жыл бұрын
Well as I was always told, wish in one hand, shit in the other, and see which gets the fullest
Is this due to a bandpass filter?
@TallPaulTech
6 ай бұрын
Which bit... what?
@GeorgeOu
6 ай бұрын
@@TallPaulTech You showed that the signal tapered off beyond 6.3 GHz as you reached into the 6.5 GHz range. I'm wondering if this is due to poor receiver sensitivity above 6.3 or if there is an internal filter that blocks over 6 GHz.
@TallPaulTech
6 ай бұрын
It would be it's signal path performance I'd say. The bandpass filter would just be the normal 20MHz one (I'd imagine) which is 20MHz at any frequency, because it gets mixed down by its LO to be the tuned frequency.@@GeorgeOu
Why does Australia limit Wifi 6 frequencies? I thought radio waves traveled the same even when you’re upside down.
You really like channel 69 huh? ;)