THE MAN IS BACK IN TOWN. Love it. You've been missed Hiram thank's for getting back into the game. I appreciate it.

Hiram...As a former Vo-tech Automotive instructor for my local school district, I am really surprised you don't have over a million subscribers. I think you need guys like myself to start promoting your videos on FB, Instagram, etc. You deserve the subs, views and thumbs up...you are the best transmission instructor I've seen on KZread and one of the most informative How-To video creators on KZread period.

Hiram - it is great to see you back posting new repair videos. I was so worried that your shop may have been destroyed by the flooding last year in your area. If you or your shop were affected, then I hope you have recovered and business is getting back to normal.

Great to see you again Hiram. Best transmission rebuild videos made.

Good to see you back again. I have been a mechanic for years, but always avoided transmissions. Until I got a job at a trans shop wanting to just do a little of their side mechanic work on a semi retired basis. Their 'builder' was awful, 50% or worse come back rate. Figured I couldn't do any worse than that. Now less than 2 years later I am the builder and he's gone. My come back rate is well under 5%, and of those its more likely to be an installer error than my failure. Still a fairly stressful situation. Your videos have helped me tremendously, especially in the first year, but still serve as educational tool/reference and will likely continue to. Thank You.

@sorryimajerk735

2 жыл бұрын

dido esa mucho respeto amigo hiram gracias

@ChevelleMike71

7 ай бұрын

Little late to the party, but kind of in a similar boat. I’ve built many a manual transmission as a hobbyist, and always avoided automatics. People regularly asked if I also rebuilt them. Told them I didn’t because there was always something so mystifying about them. Watched a handful of videos such as this and they don’t look any more intimidating than a stick shift. Contemplating dipping my toe into the automatic waters now.

Good to see you back hope all is well

“Come here pilgrim” that shit cracked me up

Great to see you back Hiram. You have the best auto trans rebuild channel on KZread in my opinion.

Glad to see you back at it mate, love these videos, appreciate you sharing your knowledge and experience

Made my night seeing this! Thank you

Great to see you back at it Hiram! Nice teardown video & looking forward to Part II

Thanks for taking the time to make this video. VERY in depth and if I did try and rebuild my 68RFE, I think with your videos it's doable since I am pretty mechanically inclined.

Wow... Hiram, I am HOOKED on your videos! I need to rebuild my 47re and your videos are helping me understand the internals of the Mopar based transmissions! Thank you for taking the time to make your videos!!!

good to see you back!

Glade to see you back!

Glad to see you back.

I appreciate the time you took to make these videos. I plan on buying an old core and building it up myself and putting it on the shelf in case I need it. Your video and the manual will definitely help me achieve my goal.

You are an absolute ANGEL for posting this! Thank you!!

Good to see you back Hiram. Thanks for sharing.

Bro, nice to see you back. GOD BLESS U

Great to see you back!!! Very educational video !!!

Yay!! Orale!! ¿¡Que tal hombre?! So glad to see a new video out! I truly hope all is well with you!! I had to comment even before watching the video... lol I did a double take and didn't believe it! 😉🤗

Finally back! Great to see it!

Good morning Hiram! It's good to see you back! My name is Daniel, I'm from Brazil. Theobald of mechanics Teomave told me about you. Since then I have been following your channel and learning a lot from you! I'm starting to work with automatic transmission. Teobaldo has helped me a lot. First of all, thank God! Thank you, too, for teaching us so much. Thank you and congratulations for the work!

Great to see you back Bro! Awesome video!

Glad you came back. Hope all is well with you and your family.

Welcome back, Hiram!! Great to see some activity here! Hope you've been busy thru the absence, and nothing bad for ya!! Thanks for sharing!

Good to see you again Hiram! It's been a year too long. Great video as usual! Keep it coming and don't give up!

It's nice to see you're back!

Great to see you again love your videos coming from the Caribbean Trinidad

Hiram! Your back! You've been missed. I really like your videos. I learn a lot from them. Thank you for all your hard work!

I'm currently in an automatic transmissions class and just discovered your channel this weekend. I was sad to see it had been a year since the last video but I hit subscribe anyway and BAM you put out a new video. Good stuff.

Killer video good to see back making them

Whats up homie! Awesome to have you back.

Good to see you back man!!!

Great to see you back Hiram!

the legend is back!

Glad you are back! 😀

It's been so long! Really good to see you! Hope to see more but understand life gets in the way. Thanks for the video.

Que bueno q estes de regreso 👍🏿 Gracias por todo lo que compartes

Sonnax makes several parts for the 68RFE to help them live at higher than stock horsepower levels such as the overdrive clutch housing kit you mentioned. Thought I would mention that in case someone who is new to the 68RFE is watching and planning on doing their own rebuild as I am. I've got a 2008 Dodge 2500 with the 68RFE so I bought a core 68RFE that I'm planning to rebuild and then replace the current transmission before I add anything to increase the power output of the engine. I'm not aiming at anything insane for power however I do plan on adding compounds which should increase low end torque as well so planning ahead with the transmission.

ALRIGHT!!!! Great to see you Hiram!

Maestro Hiram! Te encontre y te sigo desde hace poco, es un placer el ver tus videos! ERES UNA CHINGONERIA! Por no desir otra cosa, ni como agradecer el que transmitas tus preciados conocimientos! eres exelente dado que lo haces tan detallado y tan bien explicado como nadie!! Por favor sube mas videos en español! Y no nos abandones tanto Tiempo! Un gran saludo desde guadalajara mexico!!

que gusto que este bien maestro y volverlo a ver muchas gracias por tomarse su tiempo en conpartir su experiencia con nosotros haga videos en su canal transmisión automatica estoy suscrito en sus dos canales para sus suscriptores latinos DIOS lo bendiga

So glad to see a Hiram video pop up in my email!!! Thank you sir!!

Great video and well explained with details. Regards Bill

This was awesome!

good to see you back

Qué bueno que ya esté de regreso maestro, ya hacen falta sus videos.

Pretty good video. Thanks for making this. 👌

Muchas gracias por toda la información , con su vídeo e información arme con éxito mi 68rfe y quedo impecable, le agradezco su aporte y su generosidad. Saludos desde Chile Víctor

Best transmission teacher on youtube.

I am Impressed! A Lifetime of knowledge!

You do nice work man ! 👍

Hell yes...he's back!

Good to see you back Hiram. \o/

Brother we have missed you and your awesome videos

Happy to see you posting videos. Love your videos save me slot on my 6l80 shrunk check ball.

I'm a transmission builder too. Been doing it for 30 yrs or more. My snap ring pliers are always wore out. Snap-on replaced my pair for the one inside the input drum but I don't like the new style handles. My hands are too small to get a grip on them. I want a new pair like the old style. Great job on showing everyone else. Thanks

Great video boss

Hiam, You have what other Transmission tech's don't..The Gift to teach. Thank You...

Recently bought a dodge 2500 with cummins but chose to go with a standard trans simply because I had heard so much bad stuff on the autos. Interested in this video because friend has a newer dodge with auto no trouble yet but no controller but he does pull heavy stock trailers. good stuff Hiram

Your almost to 100000!

nice to see you

Awesome video! Do I have to replace the thrust bearings if I'm replacing the friction discs?

Great info about the 68rfe/ 48rfe! Got me educated well> Point was due to this f... loud music I just got half the info.🙃

Always great videos. thanks. I am going to be putting in a reman'ed Mopar pump in my 545RFE when I change the torque converter. I am getting the Sonnax 44912-01 TCC Accumulator spring to replace the one that comes in the reman'ed pump (Sonnax is supposedly made of "upgraded material increases spring strength" and rated for more duty cycles). My question comes in since I am also installing the TransGo 45RFE-HD2 Reprogramming Shift Kit and it comes with a spring set to go in the same TCC Accumulator. Should I just install the Sonnax 44912-01 instead of the TransGo springs there? Also, the TransGo kit comes with their own TCC Limit Valve parts (ball, spring, plunger). Seeing as this is a reman'ed pump, should i install those or leave them out? (thought i heard those were for the older pumps, but i am not sure). Thanks for any help.

Every single 66rfe and 68rfe i have ever torn down has that snap ring sitting near those seals in that exact position, i always install them with the snap ring not showing in that opening but i have never had one that doesn’t sit like that when I’ve opened it up…weird

thanks cap!

Sir we do not deserve you! Thank you so much for this video.

I was wondering after a rebuild of a 68rfe or 66 rfe do they need to be flashed befor driving

Picked up a truck with a 68 RFE that will not shift into reverse or park. The front drive shaft and transfer case went. Smacked the rear output sensor into the trans. Took off the extension housing and found plastic in the back. Cleaned it out but still will not shift into reverse or park. Any ideas? No trans experience. Thanks.

Nice to see you back could you do a rebuild on a powerglide

Question. Replaced my stock torque with a Goerend triple disc torque. Also did filters and deep sump pan. Ever since then I have a delayed downshift only 5-4 when coming to a stop. If in TOW/HAUL mode I have no problems. Otherwise shifts fine. Could it be a piece of debree in the valve body? Or just worn out? 350,000 kms.

what would you recommend to beef up the 68rfe, behind a 6.7 cummings, on a truck thats been tuned and deleted? the main reason for the tune and delete wasnt to add HP but ive found myself really enjoying it occasionally and would like the option without feeling like im smoking my tranny. any and all information would be helpful, no matter of how invasive it might be. ive already had a code on the tranny that my local mechanic cant figure out and since the tune, ive been concerned.

If u have it out and u spin the input shaft should the output shaft spin when in gear

The overdrive frictions burning are mostly from people towing without using tow haul. Those frictions and steels just can’t take that weight in those overdriven ratios unlike the 4 speeds. Every 68 I build I put a pump, converter, and overrunning clutch in as well. I really recommend using mopar kits, a lot of remanufactured transmissions I put in for 3rd party warranty companies come back. That snap ring in the input drum is a real SOB hahaa. Did you replace the cooler too?

Yay!

happy to see Im one of the first to see your video. hopefully more do it was good entertainment; better than discovery channel!

Question for you Hiram. My the tapered snap ring on my 68rfe is loose in the case. Will not shift into 4th. Is this a broken case ?

Hello, I was wondering if the 68rfe planetary will work in my 545rfe case. I believe they have different trust washers and the 68rfe doesn't have a bearing # 7. Any information would be greatly apricated.

Hiram ! Please help ! Is 68rfe of 2018 will fit to 2013 truck? 2013 truck has an older 2012 transmission Is there any significant difference?

buen video

I bought a 2008 ram 6 years ago. Had 146000 miles. I flushed the pan and did the filters. I always use the tow haul button when pulling my trailer. Im now at 250000 miles going strong knock on wood. I just did my first successful transmission rebuild on a 4l60e. Just curious how much more difficult this one is?

Thanks for the videos brother. For us new DIY can you point out what car the transmission you're working on belongs to? For example I have a mazda 3 2010 manual 2.0L and don't know the name of my transmission but would love to be able to search for one of your videos that have possibly completed work on that already.

Love your videos! Anyone ever put 66RFE guts in their existing 65RFE case with the 65's valvebody, solenoid pack, and electronics? What if you added the Sonnax 65rfe Smart-Tech® Overdrive Clutch Housing Kit and upped line pressure with the 66's planetaries?

@AutomaticTransmission

4 жыл бұрын

Haven't done that. On 66RFE I get the kit from the dealer. I don't know anyone yet making the frictions and steels for the overdrive clutch.

WOW long time no see

i see on other vids that you use a squeegie to push the old trans mission oil to the back of the bench. Where does the oil go, could you explain and demonstrateplease? Its an odd request i know but i m just curious ty

@youdontneedtoknow121

5 жыл бұрын

he has a transmission bench. so in that channel on the back side of the bench it is lower in the middle or even just on one side so that the oils and fluids with go down a drain and into a drum of some kind so they wont go on the ground. some transmission bench's the drain is right in the middle.

I need to repair a 2008 68RFE transmission, what is the location of the workshop?

Hi! I rebuild my 68 rfe transmission thanks to your videos! There was one problem, when you turn on D for 2-4 seconds, nothing happens and only after a pause is turned on

if possible could u post full rebuild of 1997 3000gt auto-trans...not sure yet wut it's exactly called...can't find anything for it & mine won't engage gears

What is the charge for rebuild? I have a same transmission out of my truck

HIRAM POR QUE NO HACES MAS VIDEOS EN ESPANOL UN TRABAJO EXCELENTE HERMANO GRACIAS POR TU TIEMPO ACUERDATE QUE HAY UNA COMUNIDAD ISPANA QUE LE ENCANTAN TUS VIDEOS GRACIAS

Also quick question, I just got a ‘72 Cadillac deville I believe it used dexron 2 when it was new, should I use dexron 5? Are they backwards compatible?

@KCautodoctor

6 жыл бұрын

Mike yes - the newest version of DEXRON is actually DEXRON 6 (commonly shown as VI) and It is fully backwards compatible and can be used wherever DEXRON II and/or DEXRON III are recommended. Here is a link to an 10 year old article from when DEXRON VI was just getting released to the public www.counterman.com/faqs-on-gm-s-dexron-vi-specs/

Transgod👌

What is the cost of an avg rebuild on the 68RFE?

👍👍👍👍

I have an issue with my Mazda 6 transmission. Quero ponerle un bushing al cerebro de la banda. Ay una forma de contactarte?

Video de ensamble de bomba de aceite 45RFE??

I always replace the valve body on the 68rfe.