Yes the cover is off because you need to install the chain and your problem was you didn't tighten the nut enough

That noise is probably a fuel filter rattling in the tank. Seems like a decent homeowner saw for someone who runs a tank a year or so. Impressive price.

The cover is not on because you have to put the bar and chain on

I feel like I went to the circus to see a clown

@BrianFincham

Ай бұрын

She doesn't need a saw

If you read the instructions and reviews you would know that you have to pull safety stop open to fit the clutch and then tighten rear bolt before front bolt or it will not tighten correctly.

@steveroxx69

2 ай бұрын

I watched the video and I knew that as soon as I seen what she had done she pulls a trigger and runs them she doesn't know how to work on them apparent lol

@briansmith611

2 ай бұрын

@@steveroxx69 Ya.... hses cute but should NOT work on chainsaws

@steveroxx69

2 ай бұрын

I give her credit she's out there doing it she ain't scared take care be safe

@BrianFincham

Ай бұрын

She going to get hurt she goofy

Pure example of the blind leading the blind!

@munch762

2 ай бұрын

People like this get other people like them hurt

Hi my name is George , I have the same chainsaw and had no problems with it for two years and it runs amazing

@chainsawjenna

2 ай бұрын

Oh nice! Got a couple things I’ll do with it to see if it will help the nuts from unwinding. We’ll give it another go 😁👍

@user-jv3hc3qo8o

2 ай бұрын

When I run my chainsaw the bar nuts don’t come off like that .

@Swarley218

2 ай бұрын

@@chainsawjenna sounds like a temu employee lol

@Adawg5353

2 ай бұрын

Considering that Temu was founded less than 2 years ago, I find that hard to believe. Oh but you must've recognized it from the brand. The "Chainsaw" brand obviously.

@marktarascio4766

2 ай бұрын

Yeah on the shelf it will last for years

Those bolts are called Nuts !

If you would have tighten up the nuts first they wouldn't have fallen off. It would have started quicker if you would have used the choke. Ding bat.

😳💁 Hmmm... for $68 that went pretty well. 👍 The rattle is probably the klunker fuel pickup design. Basically a big brass fitting at the end of the soft flexible fuel line is heavy so the fuel pickup is always at the bottom in any position... it's a pretty reliable design and is used on aircraft and some race boats. I would like to see you see that up with a small detail bar and see how long it lasts before a rebuild is needed. I've been watching some of the Temu boat outboard videos and they are surprisingly reliable engines, just poorly designed mounts and props on some models. I'm glad it worked so well! 👍👍👍

I'd like to know how long that saw lasts after the immediate full throttle.

I was 12 once too.

It sounds just like a husqvarna

You have an adorable yet chaotic personality!

@SkriLLex22525

2 ай бұрын

Shawty is on crack

Some assembly required 😄 This video scared the hell out of me!

@chainsawjenna

2 ай бұрын

Scarys me too I hate watching myself after a video is made 🤣🤣🤣🤣

@broman6662

2 ай бұрын

@@chainsawjenna But only the chainsaw was scary to me😂

I love my Chinese saw it's been great.

Take your time and put the bolts on right I got one it work for 2years and still works

@frostyacidity8030

Ай бұрын

Temu wasn’t founded 2 years ago? And what’s the brand of the chainsaw? China?

It looks like the problem is the chain brake is engaged on the clutch cover, so the brake ring is too tight to slip over the clutch. Take off the clutch cover, pull the brake handle back, and it should fit over the clutch.

@chainsawjenna

2 ай бұрын

I will take a look thank you! 😁👍

I now want to order things of the Internet just to open the package with a chainsaw!! I believe you may have started a new trend!!!!

@ericc1599

2 ай бұрын

I’m sure she seen it from Peg (zip ties & bias plies) he’s done that for years! This chic shouldn’t operate a can opener..lol

@mikehoncho3099

2 ай бұрын

AVE use to do it on his tool reviews

Jenna i give you credit for trying different chain saws. Soon you will have everyone thats made. Becareful with the cheap ones. They do fall apart.. i suggest staying.with brand names. Like the ones you carve with...stay safe...and keep carving.😊

@chainsawjenna

2 ай бұрын

That would be a crazy collection have ever chainsaw that was made 🫣😳

@dennismatson

2 ай бұрын

@@chainsawjenna it would be cool.

Good energy, fun review. Don't drop start saws, it's dangerous. Your nut fell off because it wasn't tightened properly, no need for lockwashers, that's weird advice someone gave, as nut to metal will hold better, lockwashers will spread out and fall off eventually while using the saw and your chain would fall off while cutting. When you tighten a saw chain hold the tip of the bar up or rest it on something to hold it up while you tighten the bar nuts, the chain drivers should be about 2/3s of the way out of the bar when you tug on the chain and pull down moderately. Use the bar wrench screwdriver shaft to lock into a tooth and turn the chain on the bar. You should be able to make the chain turn freely while using a couple fingers on the saw body for stability but not adult having to hold the saw down.

It won't fall off if you tighten it correctly

How long you carv with the chainsaw at now

Oh lord 😂😂 Gonna have to really tighten the bar nuts 😳. Take care and have a blessed and safe day 🙏

@chainsawjenna

2 ай бұрын

It was really tight that’s the thing 😂😂😂😂 It happens sometimes even to my stihls. We’ll do some adjustments to see if it helps the nuts from unwinding. Thanks for watching Billy! 😁😁

Does it have an ez start that’s impossible to drop start? Btw it’s pretty much the same saw at the pinkway. Just another Chinese clone. You have to finesse that cover on. Make sure the chain brake is disengaged when mounting. It will go on correct you just need to play with it. The throttle lock is to help starting it, since it has no primer bulb.

Who opens a box with a chainsaw!!! Thats awesome XD

@johnhabeck6153

2 ай бұрын

And not just a box, but a box with a chainsaw - what else....?

How many CC's is it ... Did i miss that

New chain you have a little thing called stitch . You may have to adjust it a lot.

What do you do with so many chainsaws???

Well done! :)

Definitely not the worst saw I’ve seen😂 in all honesty it’s cool they can make theym so cheap but I’d definitely have one as a beater saw to keep in a truck

@chainsawjenna

2 ай бұрын

These saws are definitely beaters. It is pretty impressive I hope we find a cheaper one! 😂😂😂

That's not a bolt that fell off. Called a nut

I've never seen someone open a box with a chainsaw before. That alone was more impressive than the chainsaw. 😃

@chainsawjenna

2 ай бұрын

Haha thank you I love doing it every chance I get! 😄

Hello. I trust your opinion as you use saws for a living. I am looking for a 16" saw that can be used to fell some smaller trees on our homestead, as well as de-limb them. Need to be able to run it for some extended periods of time. A couple on my list are the Echo CS-3510 as well as the Husqvarna 435. What are your thoughts on these two as well as possibly others? I chose these two manufacturers due to their precieved realiablity as well as 5yr consumer warranty. Thank you for any insight that you can give me.

@ericc1599

2 ай бұрын

Buy the Echo….Husqvarna’s are getting bad! This chic should go back in the kitchen and make more sandwiches!!

I'll give that chainsaw one thing. The muffler is in a better spot compared to where MTD has been sticking them on Troy-Bilt and Craftsman. The bar and chain oil splashes off of it in a vapor cloud. Several times, I thought the bar was burning, lol.

I bet she has conversations with her self out load even without the camera. Too funny.

Be careful. Having that side cover coming off, or not seated completely can be very hazardous. It may be hanging up on the brake assembly too.

I got one and it says the gas to oil ratio is 25-1(which is weird anyway) and yet i cant get it to start up

@Surg1GamesNSuch

2 ай бұрын

Just got her running this morning =]

You should never be around chainsaws if you don't know why a nut comes off or why the brake and chain cover wasn't on to begin with.

I bought a 4 stroke china saw and it been amazingly reliable

12 pulls needet with a brand New chainsaw super funny jenna 😂😂😂😂😂😂😂

I really like your videos! I like how energetic you are and you showcase all aspects of testing this product and I will be getting this for my uncle

A split washer will keep that bolt on, i usually replace all the bolts on my hedges and chainsaws with better quality butterfly nuts and split washers so i can tighten with small multi grips

@scottbaker4314

2 ай бұрын

If the manufacturer wanted the use of lock washers then they would have put them on it. It's made to use flange nuts

@CajunReaper95

2 ай бұрын

@@scottbaker4314the manufacturer doesn’t give a shit if it falls apart it’s cheap enough people could buy a new one and by the time you go through so many you could’ve saved that money and bought a quality chainsaw.

Keep this girl away from a chainsaw

All the stickers are so ya don't confuse it w a road grader

How does it run at ,25 to 1 I mix everything 50 to one

@chainsawjenna

2 ай бұрын

It's probably a clone from an older saws that use to run 25:1

could you do a bullfrog someday?

I've got the same saw no problem had for three years

@frostyacidity8030

Ай бұрын

Dude Temu wasn’t even a thing three years ago? And what’s the brand? China?

your personality plus chainsaws is so entertaining. this was absolutely hilarious to watch. your personality makes these videos absolutely hilarious keep them coming i'm sure you make everyone laugh or at least smile and brighten their day. for anyone wondering she prolly bought the saw for laughs

@chainsawjenna

2 ай бұрын

Hahaha I definitely bought this for laughs 😂😂😂 Thank you for the sweet comment! 🫶😁

The rattling would freak me out

It has potential.. I might buy one for gp

It’s a Professional! chainsaw !!

In 2008, the newest Stihl production facility opened in Qingdao, China.

@chainsawjenna

2 ай бұрын

Interesting

The whole thing about the side cover... Chinese companies don't put them on alot of times so they don't get broken in shipping. Bar nuts can vibrate off 1500 dollar saws... it happens. The throttle lock is probably in place because the Chinese carbs don't have partial throttle lock after choking like oem carbs. Hope this cleared some things up.

Now THIS is some quality content!!! Keep this up, love these silly reviews.

Meanwhile I just bought a $25 battery Mini chainsaw off Amazon 😂. Aseboy 8"mini chainsaw with 1 battery. Using it for basic yardwork only on my house so not too worried about it. These big companies are not your friends some of the prices that they charge for the tool alone WTF. I might get this Shoot red loctite them bolts & keep it pushing.

The question is - which one lasts longer - 10 "Professional" chainsaws or 1 stihl chainsaw 😅

That was as messed up as last years bird nest

She should be blonde lol

@MLSAWS1

15 күн бұрын

ahhaahhahahahah😐

Your chainsaw will run better in the kitchen.

Or does she?🤔

New subscriber, keep being you 👍🚜🪵🔥🚀🏰🇨🇦

Seemed to cut ok until the nut fell off.like to see it used more after you do the fixes on it.

@chainsawjenna

2 ай бұрын

Definitely will get it running again and do more test here soon 😁😁👍

The chain brake looks like it not on the clutch properly 🇺🇸🇺🇸🙏🌹

Its not a left handed saw duh

It's all your fault that fall apart

Replace the nuts with nyloc nuts, but i still wouldn't trust it XD.

I came here hoping this was a legit review but she has no idea what's she's doing

Here in Hungary you can get a chainsaw for around 30 dollars.

@angieolli5022

2 ай бұрын

How high is your average salary tho brother

@itzhackkiller6927

2 ай бұрын

@@angieolli5022 800-1000$ But we also have very high taxes, so you barely make it thru with that money.

Zenoah clone. There's tons of them out there. For the most part they work well and are a good value.

I wonder if thats how she is in real life?

It looks as if you are left handed? Just be aware of the kickback . 👍

@marktarascio4766

2 ай бұрын

So it does not kick back on right hand people ? 😂

There’s no bar chain oil in the reservoir thats not good😂

I wish I could find a girl like you around where I live

it looks like it got some serious power i love to get one myself and try it on a chainsaw mill and put it to the test!

A left hand pretty girl and a chainsaw WOW

If only there was a way to operate 50ft away 😂

@Anthony-stama

2 ай бұрын

if you put it on a telehandler strap it to the forks a cut away

That is LOUD!

She doesn't need to handle a saw .

threadlocker!

I don’t think I would want to be a KZread content creator damn y’all mean people

Is it safe...

@chainsawjenna

2 ай бұрын

Is any chainsaw safe? 😄😄

Kinda looks like a husky knock off not bad

For $68 no to bad, the full chisel chain on my STIHL 500i costs more😂🤣👍👍

China uses the old stihl design. Its actually pretty reliable.

@modifiedchevy

6 күн бұрын

Actually these are zenoah clones

Could you be any more chipper! I really do mean that in a good way. I say that because no matter how things are going you look for the bright side, and I like that, it helps us to remember not to be so serious about everything. I wonder about products that are branded like this one is. It says "Chainsaw" on a wait for it, Chainsaw. And "Professional" on the bar? No, sale me the Shade Tree please. For me that raises red flags right away.

Its so cool seeing a your women play whit chainsaw's

Well there's 8:32 I'll never get back.

4:54 you are going to break it bicus it hase ergo start

You're scaring me watching you run that saw cutting the box open, safety second?

Are you a lefty. Chain brake hand should be left hand. Trigger in right hand.

Funny you call something a “ bolt “ that isn’t a bolt. You’re clueless

Operator Error.

Um it fell apart because it's made in China just like the chain you know it's bad when it takes 5 minutes to cut a 12 inch pine log

this is a beginner u didn't tighten the nut enough took many attempts at tightening the chain

No competitor for Stihl or Husqvarna. Why the hell did you buy that trash anyway ?

@chainsawjenna

2 ай бұрын

For laughs and just out of curiosity 😄😄😄

Well... you are cute and adorable so I can forgive u! 1. its a nut not a bolt 2. put some muscle behind it when they are tightened

Shop like a billionaire that lives on the other side of the country! True story... We live in NC and Temu addressed our package to somewhere in Long Beach, CA. 5000km away. Over two months later we haven't gotten a refund or a replacement. They suggested we check with our neighbors on the other side of the country. The USPS can't give us the exact address so we can't even make the three day drive to retrieve our purchase. Shop like a billionaire that isn't concerned about the loss of nearly $100!!! DON'T WASTE YOUR MONEY!!!

@johngermany2089

5 күн бұрын

Buy it with a credit card and dispute the charge. It happens and most companies respond better once you have lodged the official complaint with the CC company.

Just subscribed yo ass to funny gang 😂

looks like made in China？