There's a certain level of satisfaction and therapy if you will in doing your own repairs and body fabrication. I'm doing fender lip repair and rocket panels.

@troylukans2174

10 ай бұрын

Yes there is

Nice work keep the videos coming

@IRESTOREBUILDSTUFF-ne9xv

10 ай бұрын

Thank you

Nice Job.

@IRESTOREBUILDSTUFF-ne9xv

10 ай бұрын

Thank you

Great tips 💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾

@troylukans2174

10 ай бұрын

Thank you

Great job Troy! I will be working on my 66 Chevelle soon. With all of the metal shaping that you are doing you may want to get a cheap anvil. I do some knife making and the Vevor anvils are nice for the money. Subscribed.

@IRESTOREBUILDSTUFF-ne9xv

10 ай бұрын

That’s a good idea thank you

Excellent job Troy! This will be one fine automobile when finished!

@IRESTOREBUILDSTUFF-ne9xv

10 ай бұрын

Thank you very much

Job professionally done !

@IRESTOREBUILDSTUFF-ne9xv

10 ай бұрын

Thank you

I would help you for free just to learn you doo nice work.

@IRESTOREBUILDSTUFF-ne9xv

10 ай бұрын

Thank you

Hi Troy. What brand of filler do you use? It seems to spread out really nice. Thanks Eric

@IRESTOREBUILDSTUFF-ne9xv

10 ай бұрын

www.autozone.com/paint-and-body/body-filler/p/premium-body-filler-1-quart/1100920_0_0?cmpid=SPL:US:EN:AD:NL:1000000:GEN:pdp&CATARGETID=120054150001288815&CADevice=m&gclid=EAIaIQobChMIt5fmt8fmgQMVN_3jBx1K0wzbEAQYEiABEgJIA_D_BwE&gclsrc=aw.ds

Good stuff. You make it look easy. What’s a good non expensive epoxy primer that would stick to ppg dp epoxy primer when scuffed? After that I’m Raptor lining over it . Thanks, love your vids

@IRESTOREBUILDSTUFF-ne9xv

10 ай бұрын

Thank you very much and summit racing. Sells an epoxy primer. That works really good. And it’s priced well.

I like your work! His many years you been doing it?

@IRESTOREBUILDSTUFF-ne9xv

10 ай бұрын

I started messing with car when I was 14 I am 47 now thank you

@jraposo911

10 ай бұрын

Oh yeah . I can tell you know your $hIT. I went the other side ,started mechanics at 18, I’m 57 now . I want to redo the body on my 71 Lemans myself. KZread university it is !!! 😊😊JR in 🇨🇦

@IRESTOREBUILDSTUFF-ne9xv

10 ай бұрын

@@jraposo911 you can do it if you need any help I’ll try and talk you through it

what gauge metal are u using

@IRESTOREBUILDSTUFF-ne9xv

7 ай бұрын

16 gauge is what I’m using

Hi I have a question. When you DA the fender or the car in general, how do you know when to stop? Meaning do you go to metal? I have a bunch of well looks like surface rust

@IRESTOREBUILDSTUFF-ne9xv

10 ай бұрын

If you have a bunch of surface rust, yes, go down to bare metal and use an epoxy primer and then do your body work on top you might have red oxide primer which will look like rust and if you look in my videos, you’ll see that on the fenders and doors. It’s actually a reddish brown primer but if you do have a bunch of rust try to get all of it off the metal that you can and you can use a Rush converter but you Gotta make sure you follow the directions and then I always put a Epoxy primer on the bare metal before I start bodywork unless you’re just doing small spots

@thekingmtmt3873

10 ай бұрын

@IRESTOREBUILDSTUFF-ne9xv ok thank you reference point. Should I have to worry about warping at this stage?

@IRESTOREBUILDSTUFF-ne9xv

10 ай бұрын

@@thekingmtmt3873 just don’t go real high speed. Probably use an 80 grit you should be just fine.

@thekingmtmt3873

10 ай бұрын

@@IRESTOREBUILDSTUFF-ne9xv ok thank you

@IRESTOREBUILDSTUFF-ne9xv

10 ай бұрын

@@thekingmtmt3873 you’re welcome. Let me know if you have any other questions.