👇WeldTube Store👇 www.weldlife.com

@ih8yt4yeetedmyoldacc

6 ай бұрын

2:26 You meant don't pull out a lot, only a few militer before touching the puddle, am I right?

Man this is amazing , I've been fighting this for days trying to get it right. I watched this 10 minutes later laying beads. Thank you . Great video

Thanks for this, I've been battling with the same setup on 3/8" plate in class, for the past few days. Good info that I'll try out when I go back tomorrow!

@terrybrewer1622

2 жыл бұрын

Well did you pass🤔

@simplyorange8553

2 жыл бұрын

@@terrybrewer1622 I did! 3G and 4G

@nijahmonroe5653

Жыл бұрын

I had months

I’m on 3g right now. I need this like a pig needs slop

@jeffgreer198613

3 жыл бұрын

Keep at it bro . 3g roots were like kryptonite to me when i was in school.

@woll8870

3 жыл бұрын

Keep trying, don’t be bummed out if it isn’t going to well, remember every fail and learn from your mistakes and try again.

@woll8870

3 жыл бұрын

@@jeffgreer198613 Same here. Took months for me to figure it out, but once I had it, the test test where way more simple.

@immoistoof8801

Жыл бұрын

SAME

@juancamaney1643

Жыл бұрын

Same..I’m in the booth watching this rn

Just started open root in class. Thank you for showing the set up and the prep process. Much help

The bead on the backside says it all. Probably the easiest method to learn open root with and consistent too 😊

I've been having trouble with this in my welding class and I think this video gave me a better understanding.

@mrillis9259

2 жыл бұрын

Repetition. Settings. Gap. Comfort. They make it look easy. Continue trying the harder positions to get better at the others. Angle your plate to forty-five an lean away or towards you to simulate 6g. This will make the regular four positions easier in relatively.

Another one for the books guys. Awesome video. Practical application.

Got a weld test Tuesday next week for a boiler company this video came in handy

Thank you i mised some days due to an inury and was goven this as a test and u helped save me

Nice video, I got a 6010 3g on a 3/8 plate today and a bend test for midterms too. I can’t wait to get it done.

@eljunior4058

2 жыл бұрын

Same I have mine today😅

Great demo !

Really great video. The film quality is amazing and the info is straight to the point. Thank you a lot for the uploads. I'm in Houston as well going to weld school and this channel has helped me alot.

Thanks for that side view. It really helps.

Very clear and nice technique 🙏👏👏

Definitely took some getting used to running 6010 roots, after spending years rooting with 7016 lowHy rods.

Beautiful work ❤

Don't pull out, got it ✅️

Thanks Rosendo 💪🏻

Awesome job brother! 😎👏🏻

Muy educativo sus videos saludos cordiales desde panamá City 🇵🇦

Great job man👍🏻👍🏻👍🏻

Hello, Excellent, thank you so much for your terrific technique, have a good one

Love your videos man. So much stuff you say I think I understand then later on I really get it and I'm like Dawm.

Niiiiiccccceeeeeeee, well explained short n simple. Keep burnin rods mate, yewwwwwwwww

www.weldlife.com WeldTube Online Store Use discount code flyduck16 for 10% off

@odingamez106

3 жыл бұрын

could we get one with a smaller plate?

@diegoolivos5656

3 жыл бұрын

Spanish!!

@JesusRuiz-hc1qm

3 жыл бұрын

Can shipments be made to Spain? I would like to buy a pipeline mask

@JesusRuiz-hc1qm

3 жыл бұрын

@@diegoolivos5656 has podido comprar estas caretas para tubería, desde aquí en España es bastante difícil..

I use a nickel for my landing and a quarter for my gap and it seems to work good

That is really nice.

Excelente, saludos desde Chiapas México

Great stuff

Great video

Completa todo el.procedimiento,el pase de raiz te salio perfecto 💪😎

holy shit man this is perfect, thank you!

Thanks you good working ❤❤❤

Ordered the shirt and a couple stickers! Can't wait

@ineedmoney6685

3 жыл бұрын

The new helmet looks bad ass, imma but one and cut it myself for cheap 😂

Excelente video y trabajo estoy soldando cañería y me ayuda mucho ,gracias

Its due on the 15th and its the 13th, this is gonna be fun and not stressful

Great welds.

That is beautiful

BRAVO !!!!!!!!!!!!!!!!!!!!!1

Awesome bro

Nice work. More videos

Nice 👍

Thanks you via very good 👍👍

Thanks for the video! I definitely needed this. I’ve been blowing holes in my plates in class haha. I’ll try this next time and see if i can control the heat more by not pulling out as much. I have to take my test soon.

@downhilldaddy9346

3 жыл бұрын

You in school Peyden?

@Peyden

3 жыл бұрын

@@downhilldaddy9346 yup. Been in trade school for a few months now

@downhilldaddy9346

3 жыл бұрын

@@Peyden what kind of welding you looking to get into?

@Peyden

3 жыл бұрын

@@downhilldaddy9346 Well I have my mig and flux certifications, but I’m working on stick now and I’ll do tig next. As far as a career goes I’m hoping I can make it on a pipeline or do some other structural work. Might try to join the local union.

@downhilldaddy9346

3 жыл бұрын

@@Peyden TIG is the future. Good luck and I hope to see you in a plant sometime 🤙🏾

Love the tips from your videos. It's great to hear and see other people weld everybody weld differently. Side note, who makes the stinger you are using? Thanks again!

very good

Still helping out fools like me. Thanks Rosendo.

With 6010 we never scare about tight gap anymore

Nice

Buitiful brother

Thanks sir

I will also become a Great Welder someday,. For now, I will train hard first. Don't stop until you get to the top.

Very well

Worked on my first try. I did it at 85 Amps and worked like a charm.

@Eduardo.Esquivel

7 ай бұрын

85 for the root? In class they told me to do it 65-75?

@JFROMM454

Ай бұрын

I’m in spot practicing where 80 amps is a bit too hot, and 75 seems too cold my keyhole keeps closing and snuffing the arc. Drives me nuts

@JFROMM454

Ай бұрын

I’m in spot practicing where 80 amps is a bit too hot, and 75 seems too cold my keyhole keeps closing and snuffing the arc. Drives me nuts

@JFROMM454

Ай бұрын

I’m in spot practicing where 80 amps is a bit too hot, and 75 seems too cold my keyhole keeps closing and snuffing the arc. Drives me nuts

What kind of disc is used to clean de root pass? Any amazon links to buy them?

I really love your videos i really learned a lot. Im from Mexico i have a question. Is there a way to go to united states to take some courses or work there.?

My work gave me an esab 180i but I don’t weld. Is that a good beginner welder?

Does the same technique apply when doing it in the overhead position??

Assalamulaikum.. Guy's I'm always watching from pangasinan, Philippines We using E6011... Me make crazy.. By the way I'm just a student beginner

He'll yeah rosendo get that shit!

Cuanto amperaje usaste en el pase de raíz vertical?????

The 3g or has gotten me depressed af Thankyou so much

Boa noite seus vídeos muito bom

For the root must electrodes thinner?

How much mm did grind down from the corners?

“Do NOT pull out”. “You gotta make sure you touch your puddle”. Words to live by.

First, I was just about to comment so when are the weld tube welding gloves and products coming?? Commented too soon 🤣🤣🤣💪

@gavinhughes6054

3 жыл бұрын

Unfortunately no gloves yet it seems

Quiero comprar esa mascara para España donde la puedo encontrar por favor diganme!! Gracias un saludo

Can this technique be used on pipe?

I started 3g Friday and I showed me instructor and he looked me in the eye and asked me “what the fuck is that”

When stitching only touch the puddle after it solidifies so go up and wait till the puddle cools down then touch it again and repeat that method, thats how i learned

how about a "monster" coupon , 6010 root?. Please.

جيد عمل رائع

Nice weld.... Can I borrow your welding mask.. 😁

Super Azerbaycandan severek izledim

I’m looking for a video on 6010 root pass on a rollout. Any help guys?

Saludos

Maybe next video show us tig on pipe but free hand every thing

Less gap between plates

Очень красиво

You made that look waaaayyy too easy bro

I pull out 😄

Just for you brother🇮🇩

I see that your rod angle is almost perpendicular; I see, in other videos, welders using slight upward (20˙?) rod angle... Does that make a difference? Thanks!

@Smurf51766

2 жыл бұрын

My boss does almost a 80° angle and his come out amazing everytime I think it’s more preference than anything

Tienes k poner una plaquita para entrar y otra para salir saludos bro

Deberían hacer del mismo video dos versiones en inglés y en español latino

I think my v groove is too narrow, not getting enough penetration because i can’t push my stick in enough

I have no problem running it but I can’t get one side to tie in and it’s annoying

How can i git the mask

Just went to your store, wildlife.com, and it says its under construction, opening soon. What's up with that?

@weldtube

3 жыл бұрын

Online store just went live👍

I always see the wide gaps low heat. Alot harder then people think. But a tighter gap requires more heat snd you gotta move faster so end of the day. Its preference.

Hola buen video , saludos desde Colombia 🇨🇴, por favor crar un vídeo en español o por lo menos los subtítulos en español, gracias 👍🏻

Cómo puedo conseguir esa careta

Dude if ok for you i want to aply to your shop

Hi bro I'm Indian 15 years ago welder

I've always known this technique as "whipping" great video!

@Solaniin

3 жыл бұрын

Seems like it, but when you're going horizontal, I don't think you touch your puddle

@billyjones3430

3 жыл бұрын

Or "jacking"

@Solaniin

3 жыл бұрын

I asked around yesterday: it's basically the upwards whip and pause technique. I believe the teacher in this video repeats "touch your puddle" not because you actually do it, but to stick in your mind that your arc length should stay minimal

@billyjones3430

3 жыл бұрын

@@Solaniin basically it's suppose to be the same diameter as the rod your using.

Do you mess with arc force/dig at all or no? I find running anything lower then 75 has me sticking like crazy. I understand all machines are different but I’m just curious

@OldStockCA

3 жыл бұрын

I run my roots at 60-65. You have to make sure you long arc it before you get going though or else you’ll just glob up and stick. Anything higher than 65 for me and my keyhole just gets out of control

@kf8575

2 жыл бұрын

Are you using a transformer based machine or an inverter?

@ieatslag5947

2 жыл бұрын

@@kf8575 inverter, Miller dynasty

@2:27. I think I would want to pullout 👶🏻👶🏼👶🏽👶🏾👶🏿😹😹😹

What polarity is used when welding plate up hill 6010 Thanks guys for the best video on welding

@jacobwade2878

3 жыл бұрын

Reverse

@DanielRodriguez-eg7em

3 жыл бұрын

DC + is reverse polarity and Welding pipe is Down hill is DC- straight polarity Which mean welding 6010 plate root pass is DC+ right?

@DanielRodriguez-eg7em

3 жыл бұрын

Thanks for reply to my questions

@jacobwade2878

3 жыл бұрын

DC+ is reverse polarity.

@jacobwade2878

3 жыл бұрын

Welding pipe with a downhill progression using SMAW/Stick process will be DC+/reverse polarity. Typically you will use DC-/straight polarity with FCAW/flux core or with GTAW/Tig processes