Airgun drum magazine CAD Link to CAD file, you can throw a tip in the jar at the Paypal link on my channel home page banner. Thanks! drive.google.com/file/d/1V9hC...
Жүктеу.....
Пікірлер: 56
@WooperChannelYT4 жыл бұрын
I understand that it’s been 5 years, but if you can tell me how it’s supposed to be powered ie: spring, that’d be nice
@kustomkb
4 жыл бұрын
It has a flat spring wound around the centre. I used a piece of .025" shim stock on a roll. You can see it here; kzread.info/dash/bejne/rGGcrqiEmLiTdqg.html
@bigchooch4434
3 жыл бұрын
@@kustomkb still sharing files? :)
@alejandroaguirre2355
Жыл бұрын
I believe it's a piece of spring that's winded up kinda like the beta c mag only better
@sirorlandodecorsica6210Ай бұрын
You are magnificant!!!!
@Mrflipflops_w2 жыл бұрын
Thanks for an easy explanation for my stupid self
@alejandroaguirre2355 Жыл бұрын
Hey I just made a remix of this drum but I doubled the drum and scaled it to fit .45 bullets and added a cutoff slot where you can fit mostly any Glock or pistol mags on top. Just trying to find the spring used in the middle of the drum. I wanna release the files on odysee cuz KZread would probably take them down 👇 The lever design is genius
@kustomkb
Жыл бұрын
Hey, glad you could use it. thanks. I used a piece of .025" shim stock, Starrett. 1/2" wide, comes on a roll. You could also look for a drill press return spring, I think they are on amzon and such. Cheers! Send me a link when you have it done. I'd like to make another for GSG .22.
@rickytickybobbywobbin74305 жыл бұрын
Any chance you'd be willing to share the CAD?
@kustomkb
5 жыл бұрын
Can you leave an email here?
@alternateweeb47632 жыл бұрын
I know its been 8 years but i still dont understand how the thing in the middle moves?
@Arthur00OO892
Жыл бұрын
It's some type of spring
@wemersonpinheiro967 Жыл бұрын
ainda possui CAD? pode compartilhar?
@kustomkb
Жыл бұрын
There is a link in the description
@wemersonpinheiro967
Жыл бұрын
@@kustomkb "Nenhuma visualização disponível" eu não consegui vizualizar
@bigchooch44343 жыл бұрын
Still sharing CAD files?
@kustomkb
3 жыл бұрын
I updated the description
@LatteiRR Жыл бұрын
Bruh i knew it works like that
@Alex-ic1mp5 жыл бұрын
This is great! Any way you can share the CAD files with me? Thanks in advance!
@kustomkb
5 жыл бұрын
Thanks, Can you leave your email here, temporarily?
@Alex-ic1mp
5 жыл бұрын
did you try to send it?
@kustomkb
5 жыл бұрын
Just now.
@Alex-ic1mp
5 жыл бұрын
@@kustomkb Thank you!
@joshj2728 Жыл бұрын
There is a spring missing in the video. A flat coil spring
@kustomkb
Жыл бұрын
Correct. I used .025 starrett shim stock. kzread.info/dash/bejne/rGGcrqiEmLiTdqg.html
@misellus3931 Жыл бұрын
wait wheres "somebody i used to know"
@mulletduck3255 Жыл бұрын
Could you send the link pls thanks
@kustomkb
Жыл бұрын
Have a look in the description.
@MrRacerhacker3 жыл бұрын
Possible to get the cad files?
@kustomkb
3 жыл бұрын
I updated the description.
@MrRacerhacker
3 жыл бұрын
@@kustomkb thanks, will prob send a tip tomorrow
@kustomkb
3 жыл бұрын
@@MrRacerhacker Thanks, let me know if you build it.
@MrRacerhacker
3 жыл бұрын
@@kustomkb working on editing the files, planning on using it as a drummag for paintball, prob gonna be a mix of 3dprinted parts and some lathe work
@kustomkb
3 жыл бұрын
@@MrRacerhacker Cool!
@Sevenilja2 жыл бұрын
Drum mag lore
@kustomkb
2 жыл бұрын
kzread.info/dash/bejne/rGGcrqiEmLiTdqg.html
@kustomkb
2 жыл бұрын
kzread.info/dash/bejne/pq2gus5qcdixlZs.html
@LacyBeee6 жыл бұрын
CAD file pretty please
@kustomkb
6 жыл бұрын
Send me a message with your email and desired format.
@kustomkb
6 жыл бұрын
kzread.info/dash/bejne/rGGcrqiEmLiTdqg.html
@LacyBeee
6 жыл бұрын
I never got the file
@kustomkb
6 жыл бұрын
I just found your message in the spam folder. I'll try to get it to you this week.
@LacyBeee
6 жыл бұрын
Thank you so much
@alternateweeb47632 жыл бұрын
Hey man i don't know if u still reply but if u answer this ill give u 5 dollars on your paypal how does the thing in the middle move?q
@kustomkb
2 жыл бұрын
Hey man, there is a flat wound spring that hooks into the hole in the side and a slot in the centre shaft. I used hardened shim stock. .025" If I recall. Cheers! kzread.info/dash/bejne/rGGcrqiEmLiTdqg.html
Пікірлер: 56
I understand that it’s been 5 years, but if you can tell me how it’s supposed to be powered ie: spring, that’d be nice
@kustomkb
4 жыл бұрын
It has a flat spring wound around the centre. I used a piece of .025" shim stock on a roll. You can see it here; kzread.info/dash/bejne/rGGcrqiEmLiTdqg.html
@bigchooch4434
3 жыл бұрын
@@kustomkb still sharing files? :)
@alejandroaguirre2355
Жыл бұрын
I believe it's a piece of spring that's winded up kinda like the beta c mag only better
You are magnificant!!!!
Thanks for an easy explanation for my stupid self
Hey I just made a remix of this drum but I doubled the drum and scaled it to fit .45 bullets and added a cutoff slot where you can fit mostly any Glock or pistol mags on top. Just trying to find the spring used in the middle of the drum. I wanna release the files on odysee cuz KZread would probably take them down 👇 The lever design is genius
@kustomkb
Жыл бұрын
Hey, glad you could use it. thanks. I used a piece of .025" shim stock, Starrett. 1/2" wide, comes on a roll. You could also look for a drill press return spring, I think they are on amzon and such. Cheers! Send me a link when you have it done. I'd like to make another for GSG .22.
Any chance you'd be willing to share the CAD?
@kustomkb
5 жыл бұрын
Can you leave an email here?
I know its been 8 years but i still dont understand how the thing in the middle moves?
@Arthur00OO892
Жыл бұрын
It's some type of spring
ainda possui CAD? pode compartilhar?
@kustomkb
Жыл бұрын
There is a link in the description
@wemersonpinheiro967
Жыл бұрын
@@kustomkb "Nenhuma visualização disponível" eu não consegui vizualizar
Still sharing CAD files?
@kustomkb
3 жыл бұрын
I updated the description
Bruh i knew it works like that
This is great! Any way you can share the CAD files with me? Thanks in advance!
@kustomkb
5 жыл бұрын
Thanks, Can you leave your email here, temporarily?
@Alex-ic1mp
5 жыл бұрын
did you try to send it?
@kustomkb
5 жыл бұрын
Just now.
@Alex-ic1mp
5 жыл бұрын
@@kustomkb Thank you!
There is a spring missing in the video. A flat coil spring
@kustomkb
Жыл бұрын
Correct. I used .025 starrett shim stock. kzread.info/dash/bejne/rGGcrqiEmLiTdqg.html
wait wheres "somebody i used to know"
Could you send the link pls thanks
@kustomkb
Жыл бұрын
Have a look in the description.
Possible to get the cad files?
@kustomkb
3 жыл бұрын
I updated the description.
@MrRacerhacker
3 жыл бұрын
@@kustomkb thanks, will prob send a tip tomorrow
@kustomkb
3 жыл бұрын
@@MrRacerhacker Thanks, let me know if you build it.
@MrRacerhacker
3 жыл бұрын
@@kustomkb working on editing the files, planning on using it as a drummag for paintball, prob gonna be a mix of 3dprinted parts and some lathe work
@kustomkb
3 жыл бұрын
@@MrRacerhacker Cool!
Drum mag lore
@kustomkb
2 жыл бұрын
kzread.info/dash/bejne/rGGcrqiEmLiTdqg.html
@kustomkb
2 жыл бұрын
kzread.info/dash/bejne/pq2gus5qcdixlZs.html
CAD file pretty please
@kustomkb
6 жыл бұрын
Send me a message with your email and desired format.
@kustomkb
6 жыл бұрын
kzread.info/dash/bejne/rGGcrqiEmLiTdqg.html
@LacyBeee
6 жыл бұрын
I never got the file
@kustomkb
6 жыл бұрын
I just found your message in the spam folder. I'll try to get it to you this week.
@LacyBeee
6 жыл бұрын
Thank you so much
Hey man i don't know if u still reply but if u answer this ill give u 5 dollars on your paypal how does the thing in the middle move?q
@kustomkb
2 жыл бұрын
Hey man, there is a flat wound spring that hooks into the hole in the side and a slot in the centre shaft. I used hardened shim stock. .025" If I recall. Cheers! kzread.info/dash/bejne/rGGcrqiEmLiTdqg.html
Wrong concept
@kustomkb
4 жыл бұрын
It's pneumatic. kzread.info/dash/bejne/pq2gus5qcdixlZs.html