watching this video makes me want exactly what you already have

57mph...that's fucking insane. I love it! Gonna do the same to my Venom X-21 in 3 weeks

@kickstart4639

6 жыл бұрын

mtlnascarfan in this run it did 61mph look at the end of video...

@116darkshooter

2 жыл бұрын

Thats pretty awesome dude. What else did you upgrade besides the big bore kit ?

the new engine shoots flames over a foot long just saying.

congratulations bro greetings from turkey :)

which kit did you order i been debating getting one

awesome video what kit did you use exactly?

what other upgrades did you do? carb, anything with the driveline?

did you port the exhaust and intake on the bore too or need to get that speed?

man...that thing is tuned to purr and go like a dream. awesome.

Would you recommend doing this on a Yamaha jog, or is it just for chinese scooters

Do you have the links to the big bore kit and any other upgrades you added

I love this video

dude what cam do you have good gawd man that sounds epic

that's legit!

You getting good speed, I want make my moped faster now

So freaking cool omg

I have a jaijue 49 cc scooter. 2020 model. It tops out at 36 mph. Thinking about getting big bore kit. It has 3100 miles on it. Changed the oil at 300, 1,2,and 3 k. Garage parked.

Nice! Maybe upgrade your brakes next.

Amazing

Wow cool

Finally you made it 60 mph, nice top speed.

@kickstart4639

5 жыл бұрын

This is in 2014. New build should be around 65 70 I hope

@Quiic7esteR

5 жыл бұрын

I just want to over 90 mph that's all my point for Scooter

Cool video

What all did you do to the engine?

I bet them car drivers were thinking WHAT THE F*** !!!!! lmao!!!! I dont understand why this sort of thing is so much fun. My Honda CRF230L Dual Sport can run 65 all day long, yet, it is soooooo much more fun to blow past traffic on my hopped up 70cc 2 stroke scooter at 50+ MPH! lol

@kickstart4639

8 жыл бұрын

Right

@crankydoodle3019

8 жыл бұрын

well, 2 stroke bikes have twice the power of a four stroke bike with the same displacement, or even more that's the reason 2 stroke bikes will always be popular for offroad bikes/motocross and mopeds mopeds particularily since no matter what you do, a 4 stroke scooter will never beat a 2 stroke one that is just moderately tuned

@kickstart4639

8 жыл бұрын

you should see my new one it's faster

@kickstart4639

8 жыл бұрын

you should see my new one it's faster

@richardmccracken4781

7 жыл бұрын

kick start it's a 4 stroke and there super slow the fact that you turned a 49cc 4 stroke into 100cc's and it only does 55 mph proves my point ......get yourself a lightweight scooter with a 2 stroke jog minarelli engine and build that engine and you'll hit 80 mph if you do it right

Did u have to do anny modificatoins to ur motor or did the bigbore kit just fit like factory made?

@AllenMacalehanister

5 жыл бұрын

Mossie Ikkewel the big bore kit slips right on just have to retune your timing chain and valves.

what size jets do you put in the 150 carbureator when using the carb on a 50cc big bore kit

@michaelkoldig6405

7 жыл бұрын

small carbs, from 19-20 and down is 4mm and higher is 5mm.... i have a 18mm naraku and use stage6 M4 jets,and the 24mm uses M5 that i got from motoart, 2 boxes, 1 from 100-122.and 1 ,124 to 148,and bought a 150-155-160-165 in loose , as i did with the M4, bought a 102-105-108-110-115

How long has your 100cc big bore kit last? Really curious to know since I plan on getting one.

@chrissssirhc1521

7 жыл бұрын

Its not actually 100cc, I don't know why they call it in US 100cc, here in europe its 82cc (51mm) and 72cc (47mm) Anyway, if you get that "100cc" kit, and take care of it, break in first its gonna last long, But problem will be your crankshaft. From my experience. I changed everything to get more power, even CVT, but left crankshaft stock. After about 1900 km (~1180mi) bearings on crankshaft just died, so If you put on big bore kit, then try to find some better crankshaft, or go to some motorcycle shop and ask them to press on crankshaft some quality bearings. I didn't do that because i was too lazy to take all engine apart again, and put money in it knowing something is gonna happen again, so i just replaced that engine with new 150cc GY6. More HP, More top speed, lives longer (if it is kept stock)

@michaelkoldig6405

7 жыл бұрын

they call it 88cc and 90cc, Naraku and Zoot calls it 90cc with a 52,4 piston... it works like a dream.. i have just put mine on,plus better electric stuff, and iridium spark plug.. i put a 18mm naraku carb,with low jet size, but still it goes like a rocket past the first 50mph,and if you sit a bit further back on it the scoot will go on 1 wheel.... I dont care for the 130mph 2 stroke,any can tune such a scoot, its harder with a 4 stroke. I will personally just tune in untill i reach 100kmh ,thats more than enought for me.. But first run, it went like a rocket, only 6,5grams rollers, but still... so people can say what they want, it is and was fun, also my m8 that is a big 2stroke fan, and all of his mopeds gets stolen..nobody steals Baotian and Giantco ;-)

@AllenMacalehanister

5 жыл бұрын

I’ve had mine big bore for a year now 12000 miles never had a problem.

@brandonhines4580

4 жыл бұрын

@@chrissssirhc1521 u did this to a stock 50cc

I would like to ask you a question what kind of clutch spring on your running and what kind of Weights are you running

@michaelreffett7733

7 жыл бұрын

Paul Hyde that's a damn good question, I would like to know also

@AllenMacalehanister

5 жыл бұрын

I personally use a 1500, and 3 7grams and 3 9gram weights work perfectly to hit 52-54 with a 52.4mm 91cc kit

My build is A 52mm piston racing 139QMB stroker 24mm carb 93cc stock gearing

@oceancitykid

8 жыл бұрын

I have a qmb139 4 stroke Tao Tao vip with a newly installed 52mm BBK and 20 & 23mm cylinder head, upgraded exhaust(baffle nut still installed), .87 main, original carb (but I do have a 24mm I haven't installed yet), & it goes 50mph with massive acceleration but way way too high RPMS. I ordered a 49-17T final gear to be installed and already put in heavier rollers to try bringing down those rpms. I'm running 9500-10k @50mph. what suggestions do you have to lower rpms back to safe zone (7500-8500)? Also was the 44mm stroker critical??

@superjojo555

5 жыл бұрын

@@oceancitykid change cdi

I wonder if Uber Eats is giving less, more, or the same amount of deliveries to drivers who choose the 49cc moped option. There is no motorcycle option.

FAST BIKE

50mm bore is 83cc 52mm bore is 87.9cc N the STG stroker kit its 93cc

That's Hall Road in Macomb County Michigan my pops lives by there I grew up out there on the eastside traffic gets really bad on that road

@raw4dis84camaro

5 жыл бұрын

If this guy is driving a moped on hall road he got ball's. I also live in Macomb county

Nice video. Maybe too late to mention now but turning 9,200 rpm with a 50mm bbk (80cc) is just asking for crankshaft failure. These cranks were not designed to have that much weight going up and down. In the forum I am on...many folks have learned this the hard way. Unless, maybe you used one of the aluminum piston kits which actually weigh less than the stock piston? Scoot sounds good though.

@kickstart4639

7 жыл бұрын

the stock crankshaft was built on 80cc kits

@grazz7865

Жыл бұрын

I was thinking of getting a whole 80cc engine and just swapping the engines.

What all you running on ur scooter to make it 50cc to a 100cc

Looks like Hall Rd?

Exhaust??

Top speed?

what's the set up on ur cvt

It would be nice if you included a picture of the scooter and talked about the mods you did along with the video of you riding.

@photonrayswaves

8 жыл бұрын

+photonrayswaves Oops just noticed your link to 49ccscootproboards and the details on your build! Awesome job!

Can u put a three mpplayer on it where u can whatch moves on and music on and speacker on it

@ 0:35 DON'T hit it ... this is not a donkey to go faster!!!

Hey what combination are u running. I also have a tao tao with a bbk but damn brotha, u are moving. Also in michigan

@brandonhines4580

4 жыл бұрын

In mi too how fast will yours go

I live in Hawaii and I got a taotao VIP Future champion.just picked up a big 400cc kit with the 64 millimeter valves.what kind of exhaust are you running what style variator a clutch and how does it go up hills

@moslimislam5714

8 жыл бұрын

400cc ?! On something that is originally a 50cc?? Or am I wrong?

@598133

8 жыл бұрын

His scooter is 150cc

@kickstart4639

8 жыл бұрын

+Hassan Deer no its not

@kickstart4639

8 жыл бұрын

Hassan Deer no its not

aye hall road I see you

Just built my 4th one of these gotta love it can take somebody’s junk scoot and spend about $100 and have it going fast than a mf

Hay I was wondering if a man could put a trealer heavy on it so u could pull a trealer on it

which state are you driving scooter on looks like kentucky

@bekabeka71

4 жыл бұрын

Joseph Lugo Idaho

Dude I have a naraku kit 52.4mm, DLH high speed variator, a9 cam, 26mm carb with Nibbi cold air intake, Ncy oil cooler, I’ve also got a slip on pipe. I still only hit 52-54 what am I doing wrong? I want at least 55-60 are my valves tuned wrong? Starting to think im a bad tuner lol

@nicholasmoulinie8350

3 жыл бұрын

do you have the link to the kit and anything else you bought to get to the speed your at now

I'm looking to get the same tachometer like the one you have, where do you hook up the yellow signal wire?

@kickstart4639

8 жыл бұрын

To the ++++ on the spark plug coil

@arca9e295

8 жыл бұрын

thanks for the info

mpg u getting

Would like to know the specs on modification you have done on your bike.

@6ix9ineisaopp98

4 жыл бұрын

Scooter*

Your post on 49scoot is titled gy6 100cc. Was this video taken when it had a 80cc BBK or a 100BBK?

@kickstart4639

4 жыл бұрын

No someone was just giving me crap because 50mm piston is 80cc and on some sites they still make the 50mm piston 100cc and 80cc. This video has stock crankshaft and a 50mm piston.

@crabjoe

4 жыл бұрын

@@kickstart4639 Thanks.. I'm guessing this BBK came with a new head? Did you also have the 22mm carb on it, when this video was made?

@kickstart4639

4 жыл бұрын

I think it was from what I remember yes. The kit did come with a head as well

What kit did you buy

I just installed a big bore kit and now it won't start. I've been using kickstart for about a month now since my electric system sorted somewhere. Is it possible that kickstarting just doesn't work after a repair/replace job like that and that it needs to be electric started? Do you know of any other possibility it could be?

@jasonc0

8 жыл бұрын

Try your stock CDI and coil

@prestonroy4932

8 жыл бұрын

if not you set the timing off

@nathangregory87

6 жыл бұрын

Shawdow194 set your rocker arm to.003 on intake side and.004 on your exhaust side after big bore install it's crucial to set valve adjusting

@miguel360kmc

5 жыл бұрын

The 3 things are listed

What bike u got?

Hello can you tell me how did you mount the gauge on your taotao? Can you link me to the parts? Also the mirrors look pretty good can I also get a link to it? Thank you!

@kickstart4639

3 жыл бұрын

I got the rpm gauge from Ebay 13,000rpm and the mirrors as well

@albertwu847

3 жыл бұрын

@@kickstart4639 can you give me the link? =)

@kickstart4639

3 жыл бұрын

www.ebay.ca/itm/402369527633

@kickstart4639

3 жыл бұрын

www.ebay.com/itm/353127566268

@albertwu847

3 жыл бұрын

@@kickstart4639 Thank you! Thanks so much!

Hey everyone. I just want to say. I ordered a new exhaust and new ncy variator for my taotao thunder and all the same parts that are on this scooter. I tried to do a stroker build and big valve head setup and all I kept getting where bad results from it. Back to stock crankshaft and to see what it can do.

@kickstart4639

4 жыл бұрын

The thunder I had to put back together has a bent frame from getting hit by a car. so I have to order a new scooter. That I didnt order yet.

rippin it

Les kit 100 cc n'existes pas ,l'alésage maximum sur un 139 qmb est de 52.4 ,avec la course origine de 41.5 si on fait le calcul pour obtenir la cylindrée réel , voila ce qu'on obtient. 3,1416 x 26,2 x 4,15= 341,58 après tu calcul 341,58 divisé par 4 = 85,39 cc réel ,on est loin des 100 cc annoncé . Tu t'est fait avoir en achetant le cylindre.

@thelagmeister

5 жыл бұрын

So what? My CB900 is 901cc but is called a 900.

woow i want mine 4T 50cc nowwwww

Hi! Variator 87&89 mm?

😍😍🚀🚀

That shit look way easier then squeezing threw Manhattan at 35 like it's normal all we know out here he was got slow as fuck and safe like Grandma 👍👍

and cvt set up?

I have a 04 honda elite 80 what big bore kit should i get if there is any available and do you guys know if it is the same gy6 engine?

@miguel360kmc

5 жыл бұрын

Gy6s are normally a Honda clone motor... But honda does have a few kits just need to dig for the right one. Dont ask here go on facebook find a scooter tuning club there are TONS tons just for Honda scoots

I definitely need this upgrade my 50cc sucks

@grazz7865

Жыл бұрын

The 50cc can reach speeds of 40-45mph but it is a struggle to get there!

@dendys04

Жыл бұрын

@@grazz7865 ye mine does 40 but i ordered a 80cc kit

@grazz7865

Жыл бұрын

@@dendys04 let me know if after you install the kit, the valves are chatty. I installed the kit, triple checked everything then did a test -I adjusted the valves to zero (tappet touching the valve) and ran the engine. The noise went away. Readjusted the valves to specs (.004). Noise came back. I’m guessing that the ticking noise is normal for that make and model engine. I’ve also watched many how-to videos and most people had a louder than normal ticking noise when they were finished

Does this still survive?

Can any bidet pay it when it come u in cause I Doint no nothing about it or do u all dealearve

Nice Scooter. Was the scooter hard to start after installing the 100cc kit? I installed a 100cc in mine and without electric start its difficult to start.

@kickstart4639

10 жыл бұрын

it could be your jet not being right or your pilot jet.

@brandonw33zfy1184

10 жыл бұрын

Andrew Brys Well all I did was put in a #90 main jet, thats it. I dont see or hear signs of the scooter trying to start.

@kickstart4639

10 жыл бұрын

Brandon Wallace what size pilot jet I used a 38 and check check valve adjustment to .004

@brandonw33zfy1184

10 жыл бұрын

Andrew Brys The kit didnt come with a pilot jet, just a #90 main jet and I already adjusted the valves to .004. I checked everything but I still cant get it to start, think it would start better if I had a electric start?

@kickstart4639

10 жыл бұрын

Brandon Wallace starting fluid

what jets were you using in the carb?. and what air filter?

The white chevy truck be saying; What is that thing who just passed me, hahahahah. Question, what is the disadvantage of big bore kit?

@OverlandOne

7 жыл бұрын

The downside is a big strain on your crankshaft and crank bearings....especially turning 9,200 rpms like he said he did in this video. A lot of folks have a lot of problems with this when using the 50mm BBK (which is 80 cc like the one in his video) 72cc (47mm) is about the largest you should go unless you are replacing the crankshaft and the bearings too.

Did you swap the crankshaft of so what one did you put in it?

@kickstart4639

7 жыл бұрын

I put a stroker crankshaft in my taotao gt5 and a high compression piston. I'll be making new videos soon. I just pick up a 2006 taotao nst for $150.00 that I'm going to rebuild and make it go as fast or faster then my blue atm-1 50 you see in this video. with using stock crankshaft.

@JacMoves

7 жыл бұрын

kick start That would be awesome. I have the tao tao atm 50 a 1 I just put a big bore kit on it a 125cc carburetor a new valve head CDI and I have the exhaust coming I should have my video up soon on KZread after I get the rest of my stuff like my Jets I wanted to go at least 50 it I want it to be scary as f*** when I ride it

Can anyone point me in the right direction for getting/installing a tach like that. I have the same scooter and don't like not knowing engine speed

@kickstart4639

4 жыл бұрын

I got it on ebay. Universal Motorcycle 13000RPM Tachometer Tacho Gauge Led Backlight Black

Hello there!✌️ Awesome vid! I did the same to my ice bear and it does go by fast but it begins slowing down at about 40. It still runs but only at 25 ish. Any ideas? Thank ya'll in advance. ✌️✌️✌️🌊

@kickstart4639

5 жыл бұрын

Your stock exhaust makes to much back pressure to go faster. Is your carb stock?

@Aloha_L

5 жыл бұрын

@@kickstart4639 i installed a new carburator and a cone air filter.

@kickstart4639

5 жыл бұрын

Yeah I did something like that to one of mine. Just open up your exhaust to let some of the pressure out. It's going to get a bit louder. Look at the burnout video. Cut a inch or so off the back of your exhaust and shine a light in it and you will see a honey cone open up that honey cone and it should run better.

@Aloha_L

5 жыл бұрын

I will do that! I'll let you know how it turns out! Thank you in advance!✌️

@Aloha_L

5 жыл бұрын

Just outta curiosity, will buying a new exhaust help? I live in California and i don't want it to be as loud. 🤔 Or what do you think?

Will the engine last as long if you put the 100cc kit on a 50cc

@miguel360kmc

5 жыл бұрын

NO... However if you do the full build change out EVERY part and take care of it than yes it will hold for some time. But even still a kitted modded 50cc VS a stock and taken care of 50cc the stock wins all day

What have yoh all done to then engine, variator, clutch, ect. I am only running 45 mph with a 50mm bore kit, aftermarket head to match the bore kit with new rocker arms, performance cdi, a9 camshaft, 20mm carb with #90 jet, & performance exhaust with stock clutch stock gears and stock variator weights. What should i do for more speed but keep good acceleration

@forrestbohlinger2356

9 жыл бұрын

@Andrew Brys

@kickstart4639

9 жыл бұрын

I ported the head and it has a performance variator that I modified to

@forrestbohlinger2356

9 жыл бұрын

Andrew Brys what variator do you have and what gram roller weights. Also do you have a performance clutch, if so what kind

@jamesturner1935

8 жыл бұрын

+Forrest Bohlinger I have what you do but performance clutch and variator with slider weighs 6.5

Yeah that's crazy I have a 90cc I added to my 50cc bike and everything question does the stroker add more power to the bike if you don't have one but mine I've done everything check my videos out I've done a lot of stuff online and I got mine almost up to 50 miles an hour I need to take it out again and do a nice straight away like you did to see what my Max speeds actually is but good stuff man I love your videos

@kickstart4639

Жыл бұрын

I built a stroker and it was slower. I could only get it to 43mph and I did alot to get it there

@fixitdaniel

Жыл бұрын

@@kickstart4639 wow so Stroker no go gal I didn't do it.

@kickstart4639

Жыл бұрын

I even used the big valve head as well. It didnt even do much it's just not worth it

22mm carb?

My 70cc piaggio NRG does 60mph with everything stock only a malossi sport cast iron kit... 2T poweerrrr

My dad had one when I frist road it every bobey in the wourld word u get that I lick that how much u won’t for it and niter thing good for no license wins ain’t got now that’s bad ass killer

damn u Covered alot of ground bro.. kool..

Hall rd?

does it shake going that fast and did you install bigger tires?

@kickstart4639

5 жыл бұрын

My wheels aren't balanced so a bit of shaking but nothing crazy you dont even notice it. I had standard tires size on it.

@peterjansen3056

4 жыл бұрын

L

Do you guys recommend putting on a larger valve cover on with the 80cc upgrade?

@kickstart4639

4 жыл бұрын

No not needed

new videos being made of new scooter and engine build and what went wrong in the process of getting to be right. it's in the process of brake in and varirtor tuning and the weights are hard to find in a big size I went from 8g and getting 11g and have a hard time finding anything bigger...

@shootermacs8779

7 жыл бұрын

kick start what size weights did you have in this video?

@kickstart4639

7 жыл бұрын

7gram sliders

@shootermacs8779

7 жыл бұрын

kick start nice I just installed a big bore on my scooter, 88 jet, stock carb, new pipe, stock sliders, only got it to 45, should i change my roller weights to 8 grams that came with the kit?

@kickstart4639

7 жыл бұрын

if your roller are stock then they should already be 8 grams

@shootermacs8779

7 жыл бұрын

kick start did u have stock cdi to? Mind does 38 mph now lol

What year 13?

100cc top end with the big valves, that's it? Awesome! What carb? Stock clutch/variator? Exhaust? Obviously you have a good combo!

@kickstart4639

6 жыл бұрын

Aaron Silvestri It's a 50mm big bore stock 69mm valve size 22mm carb straight pipe exhaust, performance cdi, has clutch springs and performance variator 7 gram sliders

how fast does it get up to 35/40 mph?

What's your setup

What jet number do you use on the carb?

@kickstart4639

6 жыл бұрын

VaNgLeE24 that's funny thing to ask. I had to use micro size drill bit set because I could not find anything at the time. Now I found some jets. But on my new setup I'm using a 150cc carb and the jetting is a 124 main

I just put a 80 kit on my taotao will it last ?

@nicholascorbett6655

4 жыл бұрын

Have a 2019 tao tao pony myself.. so far so good? And what kit did you use?

thats fast for an 100cc 57 mph

@crisbillz7415

4 жыл бұрын

He went 60

what happened to all the other vids

@kickstart4639

8 жыл бұрын

Locked for now was there one you like to see? Making a new one soon with the new scooter build....

I I just recently purchased a 2007 Yamati 50 CC Scooter, and so far, my top speed is approx. 40 to 44 MPH with Stock Parts and that's on the flat. Does anyone know how much it would cost to purchase the 100 CC Big Bore Kit, and have it installed on my Bike ? I would really like to be able to ride it out on the larger highway here in Delaware.

@cartboss7566

6 жыл бұрын

garthks. $100 on Amazon and 2 hrs to install.

@cartboss7566

6 жыл бұрын

Super easy

@miguel360kmc

5 жыл бұрын

Yes you can get cheap amazon kits from $35 to $100 for knock off brands... They will work even.. If you are lucky!!!! The knock off parts have shity quality control so you get defective parts oil leaks blow a spark plug crack blocks etc.. And it is easier than you may think to put it on but only if you have the tools and some understanding of motors no backround needed just understanding

i read somewhere on here about the jet size i have a 100cc big bore kit when i first got it i was doing 50 mph but when i changed the carb i orderd one with a 90 main but for some reason now it is hesitating on take off and i lost 5 mph any info?

@jamesturner1935

8 жыл бұрын

+johnporter jp you probably need to go down one gram size on the variator weights stock is 5 g's, try a 4 or a three if you want more up hill speed. Mine is running 4'grams and up hill is 45 mph

@jamesturner1935

8 жыл бұрын

+James Turner I also upgraded the clutch to a racing clutch and yellow torque spring and blue clutch springs

@jamesturner1935

8 жыл бұрын

+johnporter jp mine did the same thing, try adjusting the carb, or go with a 98 jetI'm running 100 jet cause a 95 bogged at take off with me

@jamesturner1935

8 жыл бұрын

+James Turner I'm running a 100 jet with a 24mm carb and Hoca Intake for 150cc, on my 50 cc scooter , bored to 83cc with big bore kit.

@gregnyce1238

6 жыл бұрын

James Turner can I run stock clutch spring with 1k Blue bell spring or just run two blue 100cc Fully built

And that is insane I have the 64 mmmm valves the short valves I have for gram rollers stop variator stock clutch and I have a free-flowing exhaust I wish I could get mine to go that fast I mean I probably do it at least 49 to 50 mph I'm pretty sure that the jet for the carburetor is not number 90 on wonder if I should try a number 90 jet in my carburetor is that just a regular stock carburetor that you're using

@kickstart4639

Жыл бұрын

Go get your self the 69mm value head and a9 cam.

Anyone kno what engine it was before the bore kit intall

@kickstart4639

6 жыл бұрын

Edy Mercival it was 1p39qmb

What's your setup for the CVT?

Are these scooters reliable I’ve heard of you lot them out you get problems a lot

@eliaslundstedt5607

4 жыл бұрын

Well considering my Quinqy QMT50QT China POS sat for 11 years and fired right up, I would say they are realiable. Albeit I did drain the gas and put new in. The old looked like morning piss or some Light ale.