sick dude, I'm about to rebuild my own marketplace pickup and this helped
@ABMoto360
Жыл бұрын
Nice, I’m glad it did. Good luck with your build.
@9monthsago516 Жыл бұрын
these videos are awesome, keep it up💯💯
@ABMoto360
Жыл бұрын
Appreciate it 💪🏾💯 stay tuned.
@TSmoove_Official_SSO Жыл бұрын
Ah yes the top end👌🏾
@YBL_Jae98296 ай бұрын
Nice! Im picking up an 04 this week! Same price!
@ABMoto360
6 ай бұрын
Nice!!
@arronjohnson3554 Жыл бұрын
Good job bro
@ABMoto360
Жыл бұрын
Appreciate it 💯
@Jetfin_aviation Жыл бұрын
worth all the hard work😃
@ABMoto360
Жыл бұрын
Indeed
@neshennarrainen83642 ай бұрын
Good for you bro, nice work. But I think you should probably try to look how many kilo you should tight the bolts on.. and maybe cross tight everything
@ABMoto360
2 ай бұрын
The bike is fine. Been riding it for 2 years now.
@tbounds48129 ай бұрын
well done video bro
@ABMoto360
9 ай бұрын
Appreciate it
@PingerK2008 Жыл бұрын
I thank you because you made me come to the realization that my bike has a fouled plug
@ABMoto360
Жыл бұрын
No problem.
@Mcnutts32 ай бұрын
Nicely done, how has the amazon top end held up over time?
@ABMoto360
Ай бұрын
I don’t know how many hours I had on it, but it lasted a good while for what I used the bike for. Wouldn’t recommend it if you race or anything.
@lukebarnhart3763 Жыл бұрын
Nice
@ABMoto360
Жыл бұрын
Thanks 💯
@Camerons1857 Жыл бұрын
Needs fork guards, front brake and a clutch lever
@TwoSmoker420
Жыл бұрын
Gas tank needs cleaning in my opinion, it’s also missing decals, the missing handlebars pad and that rusty frame aren’t too hot either… I would also repaint that pipe or upgrade it to FMF… also sounds boggy a carburetor cleaning and maybe new reeds would clear that up but It may also be coming from the bottom end seals. Always a good idea to rebuild the bottom end also as the seals don’t last very long and affects the bike drastically. It could make the bike have a lot less compression. Nice bike tho
@ABMoto360
Жыл бұрын
📝
@JCproduction08 ай бұрын
Got a 04 for 600 hadda rebuild it t after like 4ish houres been hitting for 2ish years now almost time for a full rebuild
@ABMoto360
7 ай бұрын
Nice 🤘🏾
@Southernbread686 Жыл бұрын
Nice. Does the motor have to come out to rebuild the top end or can I leave it in the bike?
@ABMoto360
Жыл бұрын
You can leave it in the bike
@jackscott5144 Жыл бұрын
Always oil your top end bearing for first start up never mind starting it with no oil 😂😂😂
@ABMoto360
Жыл бұрын
Ehh if it blows I’ll just rebuild it again 🤣
@jackscott5144
Жыл бұрын
@@ABMoto360 or that 😂
@erik62848 ай бұрын
How much did the new top end kit cost? If you don’t mind sharing🙏
@ABMoto360
8 ай бұрын
Around $100
@cornbread9472
2 ай бұрын
Hey Great video 🎉 which top end kit did you buy?
@NapkinEaters3 ай бұрын
what model year are the newly installed plastics? i want my old YZ85 to look stylish now
@ABMoto360
3 ай бұрын
2015
@NapkinEaters
3 ай бұрын
@@ABMoto360 ty bro
@kj_ballinout2 Жыл бұрын
How much you bought the bike for again??!😂🤝🏽
@ABMoto360
Жыл бұрын
$500 🤣
@matejvrabel409 Жыл бұрын
Why clean water in radiator
@ABMoto360
Жыл бұрын
Just for testing purposes. Coolant is being used now.
@dhdhdxhdhdh6596 Жыл бұрын
didnt torque anything down
@ABMoto360
Жыл бұрын
The bike is fine
@VYssLs1 Жыл бұрын
Did u run it thru heat cycle 😅5 hunnid wow here in Australia can pik one up for 1000 wich would be 5 hunnid u.s 1000 can buy u a njce finished no work needed 😂😂😂 How many pounds per foot torque was the specs 😂
@ABMoto360
Жыл бұрын
Indeed. The bike is fine. A running bike for $500 is great.
@jaymajor1432
Жыл бұрын
There’s nothing like building you a bike from scratch
@Brendan-if8ie
9 ай бұрын
Show me a yz85 for 1k running in good condition an I'll buy it right now
@dronesyca9565
8 ай бұрын
@@Brendan-if8ieI just got one for 650-700 super clean and it runs great.
Пікірлер: 48
sick dude, I'm about to rebuild my own marketplace pickup and this helped
@ABMoto360
Жыл бұрын
Nice, I’m glad it did. Good luck with your build.
these videos are awesome, keep it up💯💯
@ABMoto360
Жыл бұрын
Appreciate it 💪🏾💯 stay tuned.
Ah yes the top end👌🏾
Nice! Im picking up an 04 this week! Same price!
@ABMoto360
6 ай бұрын
Nice!!
Good job bro
@ABMoto360
Жыл бұрын
Appreciate it 💯
worth all the hard work😃
@ABMoto360
Жыл бұрын
Indeed
Good for you bro, nice work. But I think you should probably try to look how many kilo you should tight the bolts on.. and maybe cross tight everything
@ABMoto360
2 ай бұрын
The bike is fine. Been riding it for 2 years now.
well done video bro
@ABMoto360
9 ай бұрын
Appreciate it
I thank you because you made me come to the realization that my bike has a fouled plug
@ABMoto360
Жыл бұрын
No problem.
Nicely done, how has the amazon top end held up over time?
@ABMoto360
Ай бұрын
I don’t know how many hours I had on it, but it lasted a good while for what I used the bike for. Wouldn’t recommend it if you race or anything.
Nice
@ABMoto360
Жыл бұрын
Thanks 💯
Needs fork guards, front brake and a clutch lever
@TwoSmoker420
Жыл бұрын
Gas tank needs cleaning in my opinion, it’s also missing decals, the missing handlebars pad and that rusty frame aren’t too hot either… I would also repaint that pipe or upgrade it to FMF… also sounds boggy a carburetor cleaning and maybe new reeds would clear that up but It may also be coming from the bottom end seals. Always a good idea to rebuild the bottom end also as the seals don’t last very long and affects the bike drastically. It could make the bike have a lot less compression. Nice bike tho
@ABMoto360
Жыл бұрын
📝
Got a 04 for 600 hadda rebuild it t after like 4ish houres been hitting for 2ish years now almost time for a full rebuild
@ABMoto360
7 ай бұрын
Nice 🤘🏾
Nice. Does the motor have to come out to rebuild the top end or can I leave it in the bike?
@ABMoto360
Жыл бұрын
You can leave it in the bike
Always oil your top end bearing for first start up never mind starting it with no oil 😂😂😂
@ABMoto360
Жыл бұрын
Ehh if it blows I’ll just rebuild it again 🤣
@jackscott5144
Жыл бұрын
@@ABMoto360 or that 😂
How much did the new top end kit cost? If you don’t mind sharing🙏
@ABMoto360
8 ай бұрын
Around $100
@cornbread9472
2 ай бұрын
Hey Great video 🎉 which top end kit did you buy?
what model year are the newly installed plastics? i want my old YZ85 to look stylish now
@ABMoto360
3 ай бұрын
2015
@NapkinEaters
3 ай бұрын
@@ABMoto360 ty bro
How much you bought the bike for again??!😂🤝🏽
@ABMoto360
Жыл бұрын
$500 🤣
Why clean water in radiator
@ABMoto360
Жыл бұрын
Just for testing purposes. Coolant is being used now.
didnt torque anything down
@ABMoto360
Жыл бұрын
The bike is fine
Did u run it thru heat cycle 😅5 hunnid wow here in Australia can pik one up for 1000 wich would be 5 hunnid u.s 1000 can buy u a njce finished no work needed 😂😂😂 How many pounds per foot torque was the specs 😂
@ABMoto360
Жыл бұрын
Indeed. The bike is fine. A running bike for $500 is great.
@jaymajor1432
Жыл бұрын
There’s nothing like building you a bike from scratch
@Brendan-if8ie
9 ай бұрын
Show me a yz85 for 1k running in good condition an I'll buy it right now
@dronesyca9565
8 ай бұрын
@@Brendan-if8ieI just got one for 650-700 super clean and it runs great.