#500lphro #500lphplant #1000lphro #1000lphplant
Message Abhay Pandey on WhatsApp. wa.me/message/...
www.aquafilter...
www.aquafilter...
www.aquafilter...
02:11
500 Lph Ro Plant Full Detail with Specification Demo
#rosystem #roplant #ropurifier #romachine #waterplant #waterbusiness #waterfilteration #rodiagram #watervending #waterfilling #waterpacking #watertreatment #watersoftener #watercleaner #watermixer
Scope of supply in 500 LPH RO Plant:
BASIS OF DESIGN AND CAPACITY
OBJECT:
To commission a Reverse Osmosis System to recover 500 liter/Hour Plant of low
TDS.
ASSUMPTIONS:
No. Of working days : 24X7 Hrs
No. Of working hours : 10 hours per day
Capacity utilization : 91-95%
INPUTS (Raw water Quality) : Total Dissolved Solids: less 2500 PPM
OUTPUT (Treated Water Quality) : Total Dissolved Solids: 80 - 150 PPM
TECHNICAL SPECIFICATIONS
1. RAW WATER PUMP
Purpose :To feed the Dual Media Filter at pressure more than 2.0 bar, which is min.
operating pressure for filter.
Specifications a) MOC : CI
b) Type : Horizontal Centrifugal
c) Quantity: 2 No.
d) Make : Kirloskar/CRI or equivalent
2. DUAL MEDIA FILTER
Purpose: To remove the total suspended solids, dirt , iron and reduce silt density
index which can foul the membranes
Specifications Vessel :
a) Make : LCM
b) Material of Construction: MS Rubber lining.
C) Size : 13” x 54”
f) Opening : Top
g) Quantity : 2 No.
Valve :
Multiport Valve Imported
Media :
Mixed bed sand media consisting of the following
i) Gravel ii) Pebbles iii) Quartz Sand iv) Activated Carbon
3 DOSING SYSTEM
Purpose: To dose Antiscalant chemical & PH.
Specifications
a) MOC : PP
b) Capacity : TBD
c) Pressure : 7 Bar
d) Qty. : 1 No.
e) Make : Linq/E-Dose
4 MICRON FILTER
Purpose :To remove the fine particles up to 05 microns and reduce silt density index
levels to acceptable level.
Specifications Cartridge Filter & Housing
Housing:
a) Make: Indian
b) MOC of Housing: PP
c) Length: 20”
d) Diameter: 4”
e) Quantity: 1 no.
Cartridge:
f) Make: Filtration, Malaysia
g) Cartridge MOC: Polypropylene
h) Length: 20””
i) Diameter: 4”
j) Quantity: 1 no.
k) Micron rating: 05 micron
5. HIGH PRESSURE PUMP
Purpose: To feed the Reverse Osmosis Membrane at pressure more than the
osmotic pressure taking into consideration flux rate, flow and recovery.
Specifications
a) MOC : Stainless Steel
b) Type : Vertical Multistage
c) Make: CRI / CNP
6. RO MEMBRANE
Purpose: To remove the major part of Bacteria’s upto 98% by Reverse Osmosis
Membranes arranged and designed to give adequate flow and recovery.
Specifications
a) Type : Spiral Wounded
b) Make of Membranes : DOW 4” x 40" or Equivalent
c) Number of membrane : 2 No.
7. RO PRESSURE
Purpose: To pack Reverse Osmosis Membranes and operate at high pressure up to
300 psi
Specifications
a) MOC :FRP
b) No. Pressure Vessels : 2
c) No. of Membrane per Vessel : 1
d) Position : Horizontal, Series
8. ELECTRICAL PANEL
Purpose :A control panel is provided as a safety measure for the pumps & other
electrical items.
Specifications
a) Complete Starters, Overload relays, and single-phase preventer for Pump.
b) Make : Aster or Equivalent
c) Incomers, Auto Switches
9. INSTRUMENTATION
Purpose
a) Flow Meter
b) Low Pressure Switch: To protect RO pump from dry running
c) High Pressure Switch: To protect RO pump from back pressure
d) Pressure Gauges: For calculate ^P for each unit in RO system
Specifications Rota Meter :
Quantity : 2 Nos.( permeate & reject line)
Range : 2.50 cu.m. per hour
Digital TDS meter :
Quantity : 1 No.(permeate line)
Range : 0 - 500 PPM
Optional Features :
Make : linq/ Equivalent
Pressure Gauges :
Quantity : 2 No.
Range : 0 - 7 bar
Dia Size : 6 inches
10.PLUMBING & FITTINGS
a) Valves, pipelines is in PVC/UPVC;
b) NRV's, pressure relief valves, wherever needed
c) The System will be on common SS base frame
11.Scope of Supply for Storage of Raw Water and Pure Water
Raw Water: 3000 Ltrs Tank
Make: Syntex
Type: Double Layer
Quantity: One
Pure Water: 2000Ltrs
Make: Syntex
Type: Triple Layer
Quantity: One
Pure Water: 1500 Ltrs
Make: Syntex
Type: Triple Layer
Quantity: One
12. Scope of work in Piping & plumbing: Complete with supply of material &
laying.
1. Raw Water (1st Floor) to RO Plant (Ground Floor)
2. RO Plant (Ground Floor) to Pure Water Tank-1 (Ground Floor)
3. Pure Water Tank-1 (Ground Floor) to Pure Water Tank-2 (1st Floor)
4. Pure Water Tank-2 (1st Floor) to Water Cooler (Ground Floor)
5. Pure Water-2 (1st Floor) to Kitchen (Ground Floor)
6. Pure Water Tank-1 (Ground Floor) to 2nd Floor (2nd Floor)
7. Water Source (1st Floor) to Raw Water Tank (1st Floor)