Make sure to checkout my instagram to see behind the scenes: 2_vintage_ New Classifields option on my forum where you can post your bikes, quads, scooters, etc for free: 2vintagerider.com/classifieds/ My Second Channel: kzread.info/dash/bejne/hoR5ycyanae-Z9Y.html Thanks to everyone who watches and supports the channel!

@codylloyd9728

4 жыл бұрын

2vintage looks like an 85 pipe🤷‍♂️it doesn’t look like the mount is lining up

@Greywolfwarrior

4 жыл бұрын

kzread.info/dash/bejne/pZWXscWDndm5dqw.html

@rigguyjt

4 жыл бұрын

Big thumbs makes it hard to type.

@retrosjordan7816

4 жыл бұрын

Fix my bike please or.tell me how I have not spark in my crf250f 2006 I fell the spark in the handler bars

@rigguyjt

4 жыл бұрын

Your spark plug wire is bad and touching your frome.

Let that thing idle partner. Cold seize acomin.

@jaccobjohnson3651

4 жыл бұрын

TheJester618 it’s a 2 stroke it’s not made to idle

@GyroPyro121212

4 жыл бұрын

jaccob johnson They can idle for a bit. I let mine idle for a short period after startup? Then I ride easy until it’s warm.

@nissan_6828

3 жыл бұрын

GyroPyro12 yup, that’s the way to do it, heard many stories of idiots cold seizin them from my family, just let it warm up and then rip it

Why do so many people hate the man makes a living off of buy fixing and flipping bikes STFU do y'all watch just to hate help or be quiet.. Nice content keep up the good work and vids

@tibiriuscromwell8918

4 жыл бұрын

I agree. The man is just trying to make a living and show us a few ideas on bike repair. Enjoy the vid and just chill.

@Aderin.

Жыл бұрын

Ok, I am great with somebody telling somebody what they did wrong and how to improve it and all, but why would anybody just purely hate it

@martinessen5257

Жыл бұрын

You tube don't believe tha hype . people make shite for £££/$$%.

@martinessen5257

Жыл бұрын

Old VDO but the kid , can't ride a MX ,& TRYING TO TEACH BASIC SHIT🤔

14:07 when u have only ridden quads in a while

@Trentonborr

4 жыл бұрын

FredisFast I have done that many times, super embarrassing

You need to learn how to properly bleed brakes. That was cringe watching you try and bleed the back break like that

@Ethan-Martinez2003

4 жыл бұрын

Christian Beall how do you do it then

@ljyzfr1835

4 жыл бұрын

Ethan, well first of all if you have a bleeder or make one like knob head here did you don't have to keep opening and closing valve. Second you don't leave any bubbles what so ever you want till there is a nice clear non bubbly street and third that's just not how you do it.

@devinthompson3694

2 жыл бұрын

Well to be honest I don’t believe I see either of you getting your hands dirty atm . Sooooo stfu and let the man work and have a blessed day

@Aderin.

Жыл бұрын

@@devinthompson3694 man, your really angry over constructive criticism. The fact that he knows how to properly bleed breaks shows that he has experience, you don't need to tell somebody to stfu because they wanted to give somebody some advice, are you delusional

Just so u know brutha , to bleed brakes...you keep the bleeder nut closed, pump the brakes until it’s gets real stiff and hold the brake pedal down, crack the bleeder nut open until the pressure is gone then close it again. Release the brake pedal. Then pump the brakes up tight again holding brake pedal down (this holds the pressure in the line) then crack the bleeder nut open again. Repeat this until you don’t see any air bubbles coming out. Pumping the brake while the bleeder nut is open just allows air back into the system. We all do things incorrectly at times. No big deal. Just learn as u go. Nothing wrong with that.

@Deathlobster137

5 ай бұрын

Came here to say this.

All the different bikes you've had on here, and you just now found 6th gear. Lol

@1991enduro

4 жыл бұрын

Ini

you make bleeding brakes way harder than it is....should take about 2 minutes with no water bottle....wish i was closer to show you some tips

@fdrc8099

4 жыл бұрын

Tell him to call pop's. He helped with the banshee, but these type of brakes are about as elementary as it gets.

your a very reasonable person,people around here want 2500-3 grand for a filthy,rusty,beat up dirtbike.i would do business with you

@just_in_time5518

4 жыл бұрын

@ Jennifer Bradshaw I hear ya wish I could find those deals near me!

Your all putting negative comments yeah he might not have the best knowledge in bikes but fair play to the lad giving it a go and if you don’t like it don’t watch rather then making negative comments and he’s learning as he goes which is the best way to learn keep it up bud well done 👍🏻

@andrewfotopoulos7766

4 жыл бұрын

Yes!!! Exactly. He will learn more as he will no doubt be fixing more bikes.

@thefergusonlover5898

4 жыл бұрын

Andrew Fotopoulos the same as I do fixing my tractor it’s the best way to learn

"Let's try to heat that caliper up with some.......some heat"

@scottmeyer3803

4 жыл бұрын

At least he isnt putting wd-40 on it

@jerryb84

4 жыл бұрын

Scott Meyer whats wrong with putting wd40 in the caliper? I’ve rebuilt many calipers and unlocked them with wd40 then flushing the caliper correctly and never had an issue.

@vhjvbhjb5280

4 жыл бұрын

Turtle bello Well yeah sure if you have it apart and flush it out correctly it Will be fine. This Guy fills the cylinder with wd40 and doesnt even take it apart to clean it. There is definetly still oil in the system

@wyomingadventures

4 жыл бұрын

I've used WD40 many times on brakes. Never as been an issue.

You`ve got to treat your bikes better! People have been saying since like the beginning of your youtube channel. Listen to people godammit, its like you are doing it on purpuse to piss us off...

At 3:48 WTF look at the chain adjuster 😂😂 screwed all the way in

@jeffspangler3422

4 жыл бұрын

That's a lot to do with braking problems is there wheel is not tight to the chain adjuster blocks and the wheel is cocked to one side putting a bind on the rotor.

Nice video man!!!! Great fix!! nice profit

13:42 it took me a while to figure out what that sound was

“Now that the rear brakes work we can try some things!” Leading to the most alkward biggest wheelie fail in KZread history 😂

@lucassmith1487

4 жыл бұрын

😂😂😂😂

@tfijamez

4 жыл бұрын

🤣🤣🤣

@joelleblanc1512

4 жыл бұрын

😂😂

@slabdaddy4209

4 жыл бұрын

😂😂😂

@desertadam7279

4 жыл бұрын

You beat me to it lol 😂🤦🏻‍♂️

As a lot of other people have commented, you do some bike maintenance things that are just wrong. Please spend some time watching some videos by qualified people before you do these jobs. You have had some real nice bikes on this channel, but quite often I turn the videos off because you say so many things that are just plain wrong. I know you are young but Please educate yourself and your channel and your bikes will benefit so much.

@willlockhart891

3 жыл бұрын

I hate people like you commenting on these vids

@travisbartram2943

3 жыл бұрын

@@willlockhart891 it's not right to sit and watch this guy do things wrong when some of have years of experience that this kid could learn from. I have over 35 years experience and still go to KZread to see how others with more experience do things. We all just want to see him do things right? Unfortunately he's not a natural born rider/mechanic type so that's also why he gets dogged on.

Enjoyed these 3 kx videos got me all pumped I have a 2003 kx 100 with only around 10 hours on it what a shame

Nice build man, bike turned out great

I would be embarrassed to make videos about stuff i have no clue about!

@benji9458

4 жыл бұрын

Why are you upset?

@benji9458

4 жыл бұрын

It's his fucking hobby man everyone starts at zero

@m.pence1575

4 жыл бұрын

@@paulcondie2520 only asshole here is you. Fuck off .

@m.pence1575

4 жыл бұрын

@@chadcaudill509 exactly

That snow shot is sick

👏BRAVO, another great learning moment video. 🤔I did know Kawasaki made a snow bike? Nope, outside a car, 20 mph is my top speed.

you need to get an actual brake bleeder that pushes the fluid from the bleeder up into the reservoir and thus eliminates the air and fills the reservoir all in one shot.. it makes it so much easier to do ATV and bike brakes because the pistons arent big enough to really push alot of fluid at one time so it can take forever to fully bleed them so the brake bleeding tool makes it super fast and easy and it doesn't cost much.. the whole kit is like 30 bucks so those people saying if you always buy tools you never put money in your pocket are dumb because at some point you need the proper tools to make the job go alot faster so you can get more work done :) especially with the amount of brakes you fix

Never had a 125 that didn't have 6 gears...love the color blend on the 2 greens.

@blacklight4460

4 жыл бұрын

YZ125s had 5s for a few years

@ironlungs1626

Жыл бұрын

@@blacklight4460Yz 125 2002-2004 5 speed.

Certain things u just need to watch "how to vids" on and get more knowledge on before u attempt to do certain things on your channel....

Love those years with the blue forks.

Don’t listen to these guys! They all made similar mistakes trust me! My favorite channel! Why? You but, you fix , you ride! In one episode! Keep it up

Joe , what app do you use for your top speed runs? there a bunch out there but i like the one that you use. thanks!

@just_in_time5518

4 жыл бұрын

Does anyone else have a good idea for one that they use???

Little nicky is at it againnnn.

Nice. I like Kawasaki's i want to get a kx 100

Great job bud. I would’ve came and picked it up if I had the cash for it.

@OldestYoungenInGuidePost

4 жыл бұрын

It needs lots of work 🤦🏼‍♂️

i have an exactly same bike. lot of fun. i rebuilt the engine, nice job. chers

I cant wait to I see a 400ex in one these videos.

Nice I like it

70mph on a cold motor! That’s what’s insane

the front vork or stear bar looks crouked.also dont use water to bleed,put some brake fluid in the bottle.

Love the vids

You should get a 1990 kx 250! They are super nice.

Don’t rev it like that on the cold start had many motors blow up by doing that

Enjoy every videos

To properly bleed the brakes you pump up the brakes and hold it then loosen the bleeder bolt. If you pump it whiyl the bleeder is loose it just puts more air in them. Just a little tip.

@Aderin.

Жыл бұрын

I've never seen somebody spell while like that??

@nickolasvaughn667

Жыл бұрын

@@Aderin. for real 😂🤣

nice find

I know this is an old video, but dosent the coolant cap look not screwed on all the way.

Oh and you missed the chain, it's super slack lol

Good to go, perfectly

Not gonna lie dude, I got Forrest Whitaker eye watching you bleed that back brake. Brake fluid is hydroscopic, if you're going to bleed that way use brake fluid in the bottle not water. I had a 93 KX 125 it was good little bike.

So this is basically a cold start.

Nice dirt bike

You don't really know how to bleed brakes correctly. Hold the pedal down then tighten the bolt. Pump a few times and hold then crack loose... ect.

@rowdyfellasmotorsports6319

4 жыл бұрын

The kid ain't got a clue.

@did_that_hurt8387

4 жыл бұрын

you can do it his way but needs to be brake fluid in the bottle the idea of pump pump pump hold down brake lever crack bleeder then tighten bleeder release brake is to prevent air from getting sucked back in once released his method will suck back in water if it was brake fluid it would suck back in brake fluid

@nissan_6828

3 жыл бұрын

he should just watch a 10 min yt video on it lmao

Good video

Pump the breaks til stiff with the bleeder CLOSED hold the pedal or lever crack bleeder make full stroke in one direction pumping Fluid and air out. Don’t release pressure from the pedal or lever until you have closed the bleed port

Six years don't necessarily make a bike faster, it just tightens the gear ratio for faster acceleration. The only thing that makes bikes faster is if you have wide ratio gears or change sprocket sizes.

How can I get the gas/ speed test thing on my phone to use for my bike plz let me know

@henrik7966

4 жыл бұрын

search speedometer on the app store

@simsatvrepair1255

4 жыл бұрын

Henrik thank you they don’t have one where it will tell how much gas you have along with the speed lol

It's 25° outside it's freezing 🤣🤣🤣 shit that's warm sun

Just got a cr 125 today she rips

Your next wheeler should either be a 350 warrior or you should get another rare trick made for ice racing

pump the brake until pedal is hard, hold down pedal then release fluid while still holding pedal

You sure made out like a bandit on that one, if you were in Oregon you could have easily gotten 3500$ for it. Bikes here are ridiculously expensive and not only that but scarce. I want to enter your monthly contest but I'm not sure how to do it.

Man. I'm asking u this from the bottom of my heart could you please send me a seat cover for a 1994 ATC 200 please man

@2vintageDeamonFan

4 жыл бұрын

@@markcollins5026 how u gonna do that

@thiagomudiay7306

4 жыл бұрын

piss off

My 95 and 99 yz 125 both have 6 speed transmissions

Hold the throttle full when you kick, and as soon as you hear the engine start just let go, that's how I do it, the choke is fine and all but most of the time I don't even need it, only problem with doing that is when there is a problem with the bike and you end up flooding the crankshaft buuuuut if you know it's fine you can easily just go full throttle and it will start so easily :)

A Canada spec cylinder head will fix that right up in both cold and hot wether off 98 octane.Im Australian & Ive got an 02 JP10 (only 10 made per continent) and in Japan the guys in the lab coats decided to just run Canada heads and a few other bits, runs ace in 4 to 45 degrees celcious ( apx 2-110'F) with only ratio adjustmtnts. Had her since new, chews through plugs though regardless of plug color or how its riden. Every 2 rides._. Been like that since she was born.

it is called the master cylinder reservoir.. :)

I own a two stroke and when mine needed a top end it made that slapping noise like a piston slap that means it needs a top end and that’s what it sounded like 13:20

@michaelbiel7473

4 жыл бұрын

Might be exaust springs are worse out or touching the frame in front of cylinder also could been wrist pin bearings

@1991enduro

4 жыл бұрын

Piston slap

well thats a different way then ive ever seen to bleed a brake.......its easier to pump it up and hold it then crack your bleeder valve letting the air out until you get all fluid.. i dont know how it didnt suck water back up but hell maybe thats a way i should try lol

don't rev it when it's cold, let it warm up for a minute or 2

@Cavem9n

4 жыл бұрын

John I let my ktm 125 run for like 10 minutes😂

@OGKILLa9365

4 жыл бұрын

@@Cavem9n you're not supposed to let it idle for 10 mins. 3 minutes at the most

@reubenkoehn122

4 жыл бұрын

John I don’t know if I’m doing it wrong or not but when it’s below freezing I keep my bike in a warm environment and then let it idle for 2 min still just so I don’t take chances

@OGKILLa9365

4 жыл бұрын

@@reubenkoehn122 that's good just don't rev the shitt out of it cold

@reubenkoehn122

4 жыл бұрын

John ya I’m to scared to blow it up

Nice

Thats Jimmy Johns fast.

Definitely have to change at least the segments.

Back brakes more contaminated than an oil rig

I would not use water in your bottle put brake fluid in it. Especially with dot4 as it absorbs moisture really bad.

Sounds really lean to me but let’s go top it out lol

1:14 He sounds like me!

Is that a kx 5hundo

Is that water in that bottle....holy crap dude,hydroscopic,dude try again with a bottle of break fluid

All I can say is WTF I can't say nothing else I'm speechless

The SNOW IS ALL FROZEN😑

6 gears that’s crazy 😂

@braydenkimberley6341

4 жыл бұрын

No it's not most two strokes do to.

@tylerpaul4364

4 жыл бұрын

Brayden Kimberley I know I’m joking because he said that

That’s the process of degassing the breaks. A bleed is when you use a syringe and fully bleed the line

Put some deicer on that patch of ice.

Pls buy 1997 or 1998 yz 80

i wouldve bought it for 1500!!! nice bike

Sounds so loose like the bearings are shot hihihihih

19:44 to 19:48 What his neighbors here all the time,Also 19:44 to 19:48 the sweet sound.

My yz 125 had 6 gears

Easily a $2000 bike right there

Thats not how you bleed a brake,crack the stem open,push the brake pedal all the way down,hold it,close the bleed valve,let the brake lever come back up,repeat till you see no bubbles.thats a nice kx man

r.i.p bike

Why do u put water in the bottle when u bled your back brakes? U dont need to

@williamfriis1459

4 жыл бұрын

FredisFast so the air wouldn’t be able to go back in the caliper

Kawi are known for spongy brakes

The damage your doing not warming up properly leave the bike tick over with little revs i would never do that in that weather not even over here in britain in summer let it warm and lubricate engine fully and hes tiny piston slap

In FL that would sell for 2000$

Needs a sparky

One would think that he would know how to shift gears by now.

U should buy a raptor 350

It's funny cos in Australia thos things are worth about $4000

My dad had a YZ 125 that was beating all the 250s and it did 90 mph

Hey

10 kicks with choke

Let me bring my bike up to ride with y’all I love 2 hours away