I’m a bike assembler at Walmart and I’ve honestly learned a few little things I didn’t know from your videos. Thanks for making so many cool videos and helping me give the buyer the best bike I can.

@dearbulls

5 жыл бұрын

My local Walmart assembly guy did horrible job, they didn't even put the handle bar in center on my new Schwinn santis. I have to watch Kevs video and others to setup and readjust everything, from handlebar all the way to wheels, brakes, and tire pressures. It's 95% done I guess, except for the front disk brake is still having a little abrasion

@blewyd

5 жыл бұрын

Can u tell me things Walmart tells u to do and not do?

@suvari225

5 жыл бұрын

Chris Duke I dont think assembly guy in my local walmart can adjust that. Just guessing

@speedracereddie

5 жыл бұрын

blewyd there really is no quality control, they let you do you until someone gets hurt on them. If your assembler doesn’t know anything you’re going to get bad products (even to the point where they’re dangerous). They actually gave me the position because I liked bikes so much, been wrenching on them since I was very young. Not all Walmarts are this lucky, as for what they tell you to do they’ve never actually taught me anything. But I have a feeling it’s because they could tell I knew what I was doing

@speedracereddie

5 жыл бұрын

Chris Duke oh I already know what I’m doing. Just simple little ‘life hacks’ are what I pick up on or just his opinions on certain bikes i deal with all day

you should buy a used good bike and fix it up so that you can then flip it, it would make for a good vid

@abcsam

5 жыл бұрын

id love to see that, it would make a great lil series

@ruizbrian1051

5 жыл бұрын

Thatd a great idea!

@MrJamesLuz

5 жыл бұрын

It would be interesting to see a price breakdown and see if Kev would actually make money, break even, or lose money. On the low end, the margins are super slim. You buy a bike for $100, fix it up, upgrade, you might still have a $100 bike. The used market seems to be either higher end bikes or bottom of the barrel 26ers and big box bikes.

@jonlouis2582

5 жыл бұрын

@@MrJamesLuz Right. I did that years ago, I think you could make more money selling apples on a street corner.

@SonjaTheDork

5 жыл бұрын

That's kinda what I want to do myself. I love working with my hands, I love fixing things, and I love bikes. I'd love to see a video detailing the process

You should make a video that compares an expensive frame w/cheap components vs cheap frame w/expensive components.

@adityawardhana6066

5 жыл бұрын

Cheap frame all the way broh!

@dailyblankscreen7938

4 жыл бұрын

The cheap frame wouldn’t be as bad unless you’re taking that thing on whistler

@vivek_v

3 жыл бұрын

@@dailyblankscreen7938 no, cheap frames sacrifice many things from expensive frames. Expensive frames tend to have much better cable routing, and they have MUCH better geo and much more refined rear linkages (for full sus). In addition, using a cheap frame makes components/component upgrades much more expensive than an expensive frame with cheap components. Cheap frames are often not stiff, and they are flexible in places where they shouldn't be.

@dailyblankscreen7938

3 жыл бұрын

Zhong Ze understandable

@LordHolley

3 жыл бұрын

I picked up a GT aggressor from Dick's sporting goods. I have slowly upgraded to hydraulic brakes, one x drive system, Rock shock fork and other higher end components. Bike is absolutely amazing. The geometry is spot on. I am definitely an aggressive rider, this thing has not let me down.

For Shimano freehubs, you don't need a 11-speed specific hub for MTBs. Only road 11-speed cassettes require a 11-speed hub. 11 speed Shimano (and 12-speed SRAM NX) have a dished outer cog and are designed for the same as a 10/9/8 speed HG freehub.

This is the best Kev Central video . I refer so many people to this video when I hear they are looking for budget MTB upgrades. It has helped a lot of people.

Stay away from cheap carbon handlebars too. I've seen my fair share of crashes with lacerations and whatnot because of them snapping!

@jonlouis2582

5 жыл бұрын

Thats a good tip. Yikes!

@jacklo325

5 жыл бұрын

Thanks for the look out. I bought one a year ago and concerned of snapping, hence never used it.

@jedr.3494

5 жыл бұрын

Ace kit Jessica's snapped like that on me so I'm not really okay with cheaping out on bars anymore. Those metal or carbon bars when broken are kinda like running full speed with a machete facing your body and falling... terrifying honestly. Be careful out there.

@thiosemicarbizidebenzoylal2921

5 жыл бұрын

That's not only a total myth but is aimed at supporting a industry that hands down is nothing but scam after scam. Initially low grade carbon was used by Chinese suppliers but that was some years ago. Of course carbon will break if you abuse it, but because its cheap means absolutely nothing anymore. The anti Chinese carbon scam has been exposed for years IF YOU KNOW BIKES. Dont buy carbon anything if your going out biking to crash all the time.

@benjaminchilds9759

5 жыл бұрын

@Writer B.L. Alley i've had an experience like this too. Some time ago i found out mountain biking was a thing! coming from road with no idea and little money I bought a £13 pound handle bar....... (carbon) to replace the very small road ones. the bar has been through hell on a rigid bike and has shown no sign of breaking (even with several beautiful crashes ;) ). But with the risk factor and more knowledge with bikes, i couldn't recommend doing the same now

Wow! What a comprehensive, well-presented, methodical approach to budget upgrades! I would add that the key to this would be starting with a decent platform (frame) such as the Carbon X or XR Pro, then incrementally upgrade as funds become available. The nice thing about it is the fact that any upgrades purchased could be used on better bikes in the future. Kevin demonstrates this interchangeability regularly on his channel. To me, that’s the fun part!

Your videos are second to none. You give good solid information and let the user decide what is best for them and their particular needs/style/price point.

The saddle the saddle the saddle. If the one you have is not comfortable try a few out. Best upgrade on any bike.

I'm starting a budget build & your vids help out immensely, I have just got back into MTB's after a 10yr break and don't have much of a budget. 55 yrs old and getting down & dirty again, love it. First upgrades for me were bars, saddle, grips and pedals.

Step 1- grease.

@junboo8730

5 жыл бұрын

What to grease?, I’m waiting for my new bike

@desmondmoonbear4143

5 жыл бұрын

@@junboo8730 bearings in the headset ,cranks ,wheels That's the top three

@junboo8730

5 жыл бұрын

Desmond moonbear Need to find some videos to learn that. Thank you.

@chuckfinley3152

5 жыл бұрын

Jun Boo everything, except the brakes

@junboo8730

5 жыл бұрын

p0k3y ha thanks. Makes sense.

I installed a Wake 780mm aluminum bar on a Fomtor 60mm stem yesterday and it made a big difference on my Walmart Schwinn 29er. I had to grind a little under 1/4 inch off my steering tube to get a tight fit, but it was worth the work and solved the problem of not having an extra spacer. I got a set of Fifty-fifty double locking grips and some Chester knock off nylon pedals similar to Fooker, but Lycaon brand. What a huge improvement!

Looking back at your videos, and love it. My AL Comp now has a new stem, bars, pedals and a freehub rear wheel. Just waiting on some more money and I will do a fork and a 1x setup. Thanks again for the videos and support! Great to see how we can have fun and save a bunch of money!!

Well, this is a much more logical approach than the way I usually do it. I have a couple big box bikes now and can't really find a lot wrong with them except that they seem to weigh twice as much as my decent bikes. The first thing I replaced was the saddles.

This is a great upgrade video... I think this video covers all the basic upgrades. Good starting point.

Man, thanks a lot for this video! I have an " El Cheapo" Schwinn MTB and I'm looking at upgrading but didn't know where to start. Now I do!

First two things I upgraded on my Hyper Hydroform were the seat and the pedals. I am 6 feet tall and have a wide butt so I want a more comfortable seat than the narrow seat that came with the bike. They aren't the best pedals, but the metal Mongoose pedals are way better than the cheap plastic pedals that come with the bike. I am thinking about getting some of the upgrades you put on your Hyper Hydroform! Thank you for the awesome work you do on your videos! I am always looking forward to seeing another new video! This video was particularly helpful! Can't wait till I can ride my Hyper Hydroform again! It is just such fun to ride!

You should try the microshift advent groupset

Kev, great video, especially for someone looking to start.

Awesome video, I like the graphic style you went with in this one paired with the actual products on Amazon! Good change of pace and super good info

Im new to MTB (first time on a bike in 20yrs). I picked up a GT Aggressor Pro a couple of weeks ago for 278 before tax at DSG (with help from your videos). I picked up a Raceface 60mm stem, Enlee Acekit 760mm bars and Fifty-Fifty double lock grips. I picked up Maxxis Aggressor tires but didn't put them on yet. Fork will probably be next and eventually a 1x11 crankset. I've watched many of your videos. Thanks for all your help.

@officialclownbusiness7788

5 жыл бұрын

heyzooz sounds like a rad setup. Ride it hard and have fun dude!

I've been looking for some inexpensive/comfortable grips and a saddle for my new fixie bike. This vid gave me some new candidates! Great information in this one, thanks for the helpful recommendations. 🚲

First thing for a big box bike. If your hub is black, the bearing cups are probably painted black also. Ride for i day to loosen all paint on the cup race surface. Then clean, grease and adjust all bearings. Headset, 3 piece/ 1 piece cranks and wheel bearings. This will make the most of what you already possess. Take your time and adjust your cockpit. Get it the best you can. You may find that you only need a few of the excellent upgrades presented in this video. Great ideas Kev, keep them coming.

Love you suggestions. Bought a 40$ very beat unridable next power climber today from 2011. No whistle and bells but hoping over the next couple months I can get it on the road and light trails. As I said new to this but health in mind and maybe a new hobby I'll get there. Thank you sir for great videos

3 of the best upgrades you can make to a cheap Walmart bike is stainless steel cable nylon coated cable housing sealed bottom bracket in a decent set

@KevCentral

5 жыл бұрын

Thx

@JimmyB463DP

5 жыл бұрын

Good point!

@jacklo325

5 жыл бұрын

Extremely true about them bottom bracket...

This definitely helped me out! Hope I can add some of these upgrades on my own bike.

Greater than I expected small, compacted, easy to use

I have a bike worth about 4-5k that I pamper like a new born baby. cleaned after every ride, lubed before and after every ride. it's one of my most valuable possessions in terms of sentiment and actual cash value. I still watch these videos because kev is one of the few people that are genuinely passionate about teaching others about true budget mtb! in my opinion, it's worth spending a bit extra for higher quality components but when that's not an option or you simply don't want to, kevs channel is literally invaluable to so many people.

Great information and strategy! I'll be coming back to this one.

I used to run foam grips on my motorcycles (almost a signature). Then i worked out why my hands huurt. Delete foam grips... If i get tired of my mongooses' xposure seat im gonna swap over the seat from my giant cypress2 - its a lovely comfortable seat with a suspension post which looks like itll fit the 'goose 😁👍🏻😁🇦🇺. As stated elsewhere i upgraded the grips to pin locked, and had some alloy flat pedals put on. I also had the bar stem replaced for a muuuch longer adjustable angle model so no more massive weight on my wimpy wrists. When theyre worn out i will replace the tyres with wider tubeless. Michelins if i can afford them (i have a motorcycle and a 4wd so cash flow can be an issue). Theres a dropper post in its future too some time. Great vids Kev 👍🏻👍🏻

Great video Kev , but didn’t expect any less, that’s why I watch em all. Shane uk 🇬🇧

Thanks for the break down and thought process. I bought the hydroform first thing I changed was the pedal since I have a size 13 shoe and the stock little cheap guys where a huge cheap upgrade. Looking at wheels next because that's the next thing that's not gonna hold up.

You know whats crazy? Why is your subscriber count so low? I don't even have a bike but I've been subscribed for at least half a year by now maybe longer. I just find your approach to bicycle riding so refreshing, why does everyone love spending so much?

Thank you Kev. Always learning.

I recently got a new bar for my bike. I looked for 6061 aluminium for strength. And a 25mm rise to help ease back pain. And 760mm wide - to get through skinny tracks.

I have a mongoose xr250 that i'm upgrading, thank you for this video.

Race face Chester’s are my go to. You definitely sold me on them a couple years ago.

So helpful man. Thank you

Awesome video 👍 I think the ONLY thing you missed, was a dropper post. I'm yet to see you upgrade to one. There are cheap ones out there. Trust me. I'm running one. DMN or DNM (I can't remember and too tired to go outside and look) for over a year now, and I bought it used off of eBay for $70 shipped to my door. Seth's bike hacks did a review, and everything he pointed out wrong with it, is exactly what goes wrong with mine. But for a cheap, externally routed dropper, it works perfectly fine for me, and was a complete game changer. Alone with bars, grips, fork, and a rear tire. Next will be a 1x setup as mine 3x7 on the ol Kona Lava Dome has some mile on her. Plus I like the idea of a cleaner cockpit and simplicity. Thanks for the great ideas on cheap, yet good products 👌👍

I always considered the contact points(saddle, grips, pedals) to be the first upgrade. Once those are sorted I can consider other upgrades.

I got the aluminum comp.,i swap the handle bar and stem with the race face next(carbon $29.50 both) it is a big difference...thanks for all your videos.

My bike currently had that seat and its great, also some grips I really like are ODI Ruffian grips

Bought a get aggressor pro yesterday saving this vid for when I’m looking to step it up.

@KevCentral

5 жыл бұрын

Congrats

Congrats on 51 k subs mate!

I’m sharing this video! Great video for newbies!

I updated my Boundary with the Amazon Action Square Taper Crankset and 38 tooth chainring. Then through on some trekking bars which are great for road or gravel riding but not much good for trail riding. I mainly ride on gravel or logging / fire roads so the trekking bars work for me.

awesome video thanks for the upgrade ideas

Kevin, Thanks for the vid and links. Time to replace the microshift on the Mongoose State, and since its a 9 speed 11-42t rear, thinking about Sram X-5 redrailuer and 9matching X5 shifter (9 speed) and a 1x, with the 11-42 range I rarely change the front from the middle ring anyway.

Thank you for video. IMHO, it always depends on the special bike. If everything is bad, my order will be: 1) pedals 2) tires 3) handlebar 4) brakes 5) a fork 6) a wheel set 7) a system Thank you!

Great video. Thanks.

I have been inspired to buy the bca and Upgrade it to a single gear 29er thank bro great vids and really enjoy your build and trail ride vids build more Walmart bikes at $160 I feel very comfortable getting into bike build and riding again thanks

Could you make some more videos on the mongoose malus? I have a dolomite and am wondering what you would upgrade.

Awesome video keep them coming

I have ODI ruffian lock on grips on my trek, they are known for BMX grips and I've had they're products before so I knew they were quality. Only about $20

This guy is a legend

Thanks Kevin!! Just ordered those ESI foam grips through your link above thru Amazon. The grips that I'm trashing are horribly unpleasant to hold onto, hard (8 year old?) rubber.

I took your advice on the ace kit jessicas... they did their job until one night and 300 medium/hard miles later, they dangerously snapped to the left of the stem by a few inches(not due to over tightening). I got insanely lucky I wasnt headed straight to the hospital. Kevin has good reviews and I like what he does... but he doesnt do manuals, wheelies jumps or slam through chunky rough sections on these bars.. if you ride a little hard please be careful with these bars. I wish I could post pictures of the snap but its extremely sharp metal. They snapped as I pulled up a wheelie and I was able to bail of the back, but it all happened so quick. If I was going downhill with lot more weight on the bars I would have been seriously injured. Be wary.

@thiosemicarbizidebenzoylal2921

5 жыл бұрын

There is nothing wrong with bars that are 6061 aluminum unless you crash all the time. Those bars are downhill tough guaranteed. Get steel bars if your bike is always eating dirt. Cheap means nothing in this industry IF YOU KNOW WHAT TO LOOK FOR.

Can you make an Amazon Wish List of parts for all the Project bikes?

Fooker pedals are by far the best pedals for the money! They are the exact same thing as the race face chester pedals but for less than half of the price

I actually just finished bringing life back to a DB coil with: Front Suntour xcm $70, Shimano cranks & bb bracket $35, riser bar & short stem 31.8 $35, Maxxis tyres $80. The DB rides much better a shaved some weight off this tank. I'm sure this bike with the new parts are gonna last for many years.

If you are upgrading the fork, do the front wheel at the same time. For very little difference you can go to a 15mm through axle which massively reduces front end flex. We have two bikes with otherwise identical Suntour Raidon air forks (really good for the money!) and it's a noticeable change. You should try the cheap nylon Nukeproof pedals. Awesome things

Awesome video

I have the Fookers on my DB no issues with them at all. Even in the heavy mud i have to deal with.

I do not have a Walmart bike but I am upgrading my big box bike. So, the seat-seatpost-stem-handlebar first, then the wheels, then the fork. I am not upgrading the fork anytime soon because it is Suntour XCR32, it works good. Or the groupset which is Deore M6000.

Pretty much how im approaching my upgrades... I need you send Kev central some pics of my bbb!

Fooker pedals are great. I bought some last year and haven't had any problems with them.

@CPV93

5 жыл бұрын

Same here

I own a Raleigh Tokul 2... Upgraded points of contact first (pedals and grips). Plan to upgrade tires and saddle soon.

@jasonkirkcaldy7463

5 жыл бұрын

Almost forgot I also plan on buying a dropper post. I ride trails and this will make it a lot easier to transitions from uphill to downhill. Thanks for the awesome video!

I've got a sr suntour xc30 fork with 100mm of travel and a 3x8 drive terrain tourney in the front with a sram x4 deraliur in the rear 29inch wheels and a 20 inch frame

Thank you for making this video! Answered a lot of questions. Do you have a cheap reliable dropper seat you like?

The saddle was the first upgrade on my Alum Comp. stock seat was extremely painful couldn't sit on it for a few seconds.

Thanks really helpful

I think that the wake handle bars and stem are a good but because I ride a lot of jump trails and I’ve never had it brake and come lose

6:51 Only pedals I can recommend are Pedaling Innovations Catalyst pedals, due to support for arch if used with mid foot position. check them out, also if you get them on sale they are quite affordable compared to others even with full price, but of course not as cheap as composite pedals.

Great video!

After having my LBS put Chester pedals on my new MTB, my 11 year old son saw them and said "I need these for my bike so my feet won't slip off." How could I argue with that logic? I added Fookers to his Trek 820 & my gravel bike. Mixed with five ten freerider shoes make a perfect combination.

Would you be willing to do an upgrade video on a REI DRT 1.1. It’s a good beginner bike that I’ve enjoyed and would like to upgrade but can’t find any videos on it. Thank you really enjoy your videos

Great content!!! Thank you!!!

Just as we talked and I saw this video. Thanks a lot for the suggestion. Wish you can do a new bike assembly and adjustment video also. My santis came Friday and Walmart offered me assembly. After I pick it up I found several places are still loose, low tire pressure (about 25 psi), even the handle bar is off to one side. I have to come home and readjust everything. Now it got 45 psi in tires and everything realigned and tightened. But the front brake is still having minor abrasion.

@TonyHob

5 жыл бұрын

Check out RJ the Bike Guy's channel if you have not done so yet. I often think about doing a how to video then realize he already made one (or Park Tools has one) and I end up not doing one. BTW, on my own Schwinn Taff the front rotor was bent and I had to replace it in order to make the rubbing go away (too bent to be straightened) and I also gently sanded the brake pads which helped a lot.

Great info, thank you.

1st upgrade will always be contact points. Grips, saddle, and pedals. Stem and handlebars fall into this because being comfortable on your bike will make you want to ride it more. 2nd upgrade is tires. If your bike has a decent wheelset, change the tires out to something that suits where you ride (or how you ride). 3rd upgrade is (if the bike can accept it) a dropper post. If you do aggressive riding, being able to get your seat down and out of the way on the fly and back up when you need to pedal is a godsend. You'll never want to have a bike without one again. From here on out, it'll always be what you feel your bike is lacking. Do you have confidence in your brakes? Sometimes, upgrading to a cheap set of hydraulics from Shimano will give you more confidence. Already have hydros? Try a bigger rotor size or different pad compound. Feeling like your bike dances around too much? Upgrade your fork and rear shock. Have trouble climbing? Consider changing your drive train to have lower gearing.

The only saddle I ever upgraded was on my roadbike, because the original was too wide. If a person knows how to properly adjust and set up a saddle, no need to replace. Cheap saddles are just that. Easily bent rails, and heavy

This video is very helpful

I love your videos!!!

I'd be so bold and suggest that the bottom bracket on the big box bikes (say that five times fast!) will be among the first major component to give out. Mine has a ton of play in it, and once I source something big enough (wrench etc) to remove the fixed cup, I'll be replacing it with a generic sealed cartridge.

@KevCentral

5 жыл бұрын

Many big box bikes already have a sealed cartridge. It’s getting more common.

6:28 i have this saddle and I'm using it for about a year now and its really good

I still don't know if aliens really exist! Not such a "comprehensive" video after all! Seriously though, lotsa good upgrade advice. Thanks. On the comfort side of upgrades, even though they are not so cheap, I really love my Ergon grips. They fit my hands and the wider surface area adds a level of comfort you don't find in round grips.

Those fookers look great.

with the steerer tube on the rockshox recon rl, it is actualley tampered. all rockshox forks are tapered unless noted otherwise. in this instance, it is a tapered steerer tube which then tunrs into a straight steerer tube

@KevCentral

5 жыл бұрын

The one linked in this video is a straight steerer model.

Now that I know my front fork is upgradeable to threadless this guide feels far more relevant. The fact I have no rear disc mounts is an issue though.

Micro shift adventX is also a great choice for an affordable 1x setup

Seat and pedals are a must gearing can be fickle so I swap out the stock stuff

My straight steerer fork has a small issue, the very small circle ring thing that are found between stem and the fork has I guessed opened up by wear and tear, whats the solution?

0:25 “Do aliens exist?”, pops up and I immediately subscribe forever 😂😂😂 these are the questions

considering upgrading my commuter/road bike. Would upgrading the bottom bracket still be a good option since I plan on keeping my duel chain rings?

Please please please upgrade your Schwinn Al Comp bike soon. My wife bought one and I wanna buy one but I don't want to upgrade till I see what you have done given your knowledge because I am ignorant when it comes to anything mechanical and I will most inevitabley buy parts that won't fit. Thanks again for all your great content.

Good morning mister Kev any idea of when Taff aluminum c o m p best ride and upgrades please help ready to ride

I put 780 Wake bars and Wake stem with a Suntour fork on my Boundary.

Im upgrading my hyper explorer 27.5 inch it works great even without the upgrades unfonanatly now they only have 29 inches that are not as good quality as the original explorer so i had to buy it used

Hey Kev what would be a good aftermarket fork for a nishiki colorado comp? I just picked one up and want to slowly upgrade it.

This video was perfect timing. I was at walmart today and saw a Hyper Explorer 27.5 and I was thinking about getting this to up grade. I don't know what the difference between this and the Hyrdo is but I liked the way it looked and I think it may be something I could ride as I upgrade.

@KevCentral

5 жыл бұрын

Explorer has rear rim brakes

@kiletaylor94

5 жыл бұрын

@@KevCentral I did not notice that. My mistake. Thanks for saving me. Have you thought about reviewing the Vitus Nucleus?