Great info! Thanks for posting. How do you keep water from seeping under a tubular building on concrete? Do you use rat edges?

@wolfsteelbuildings

7 ай бұрын

Since we do our own concrete work, we do the rat edges (brick ledge) on the concrete and that eliminates the common water seepage issue in tubular buildings. If you didn’t get the brick ledge on concrete, we recommend to have tubular builder install M-Seal along with polyurethane self leveling sealant under the base rail. It helps tremendously.

Love the info. I’ll definitely be calling you guys when it’s time to build. The constant clicking of that little thing she was holding was driving me a little nuts though 😂

@wolfsteelbuildings

Ай бұрын

We look forward to getting you taken care of Ron! The clicking was through the editing - we apologize about this and have adjusted in our newer videos! Learning as we go (:

You guys also have a website that immediately shows models and frames and options. And it's much more trustworthy to put your face on KZread, because you open yourself up for criticism. I'm sold.

@wolfsteelbuildings

Ай бұрын

We pride ourselves on transparency. We want to make sure everyone, not just our clients, are knowledgeable when making an investment like a new building, shop, etc!

Thanks for being up front about your pricing. It appears that you have a quality product.

@wolfsteelbuildings

6 ай бұрын

Thank you Steve!

Hey galz and Advil it's your fav North Carolina guy!! I SO WISHED WOLF STEELE SERVICED NC, CAUSE I TELL EVERYONE, START TO FINISH, WOLF STEEL BUILDERS ARE THE BEST!!!!! YOUR WORK SPEAKS FOR ITS SELF!!! WOLF USES THE CORRECT CORNERS AND THE RIGHT GABLE ENDS!!! U GUYS AND GALZ KEEP KICKEN ALL THERE TEXES ASSES!!!

@wolfsteelbuildings

6 ай бұрын

Thank you Jerry!!

Great video. Thank you!

@wolfsteelbuildings

10 ай бұрын

Thank you!!

Great information and presentation! For those wanting to make informed decisions, this on-demand consumption of knowledge is very helpful.

@wolfsteelbuildings

9 ай бұрын

Glad to hear this brought some value! Informing clients is our goal

Absolutely amazing information, thank you

@wolfsteelbuildings

2 ай бұрын

Glad it was helpful! We appreciate the comment

Awesome video and very helpful!

@wolfsteelbuildings

8 ай бұрын

Glad it was helpful!

Great video guys. Lots of info. Awesome

@wolfsteelbuildings

6 ай бұрын

Glad you enjoyed it! Hopefully it helps you with your project if you’re looking into a building

Thanks guys! So informative 😊

@wolfsteelbuildings

4 ай бұрын

Thank you for the feedback! We’re glad you found value in this video

Good stuff, thank you

@wolfsteelbuildings

7 ай бұрын

You bet!

I love the video thank you

@wolfsteelbuildings

8 ай бұрын

Glad you enjoyed it, Terry!

Great information! I wish you serviced SoCal!

@wolfsteelbuildings

8 ай бұрын

Maybe one day! Hopefully we can help you make a decision 💪🏼

I'm considering a 30'x50'x12' tall metal building with four 10x10 roll-up doors and two walk-in doors and six 30"x36" windows. I've gotten several quotes from three different companies. I might go with Alan's Factory Outlet that services my area (southeast North Carolina). I haven't given any monies nor signed any contract but will do more investigating before I pull the trigger. Enjoyed your video. Very informative. 👍🏽🤠 11/22/23

@wolfsteelbuildings

8 ай бұрын

Thanks for the feedback! All the best with your project! 🤠

Great presentation thank you for all that good information you guys providing keep up the good work do you guys service Florida I am in the process of getting a metal building. thanks again God bless Alex .

@wolfsteelbuildings

8 ай бұрын

Hi Alex! We do not service FL, just Texas right now. Hopefully our channel helps you with ideas and things go look out for in your area. Best of Luck!

@dialecticalmonist3405

Ай бұрын

​@@wolfsteelbuildingsDo you service 1 mile outside of Texas? El Paso, NM?

Awesome job guys. Well done!😁 Wish you serviced the South AL area.

@wolfsteelbuildings

3 ай бұрын

We wish we could Roger! We do hope our channel assist you in your project/building project hunt!

I love you guys! ...😢Im in Georgia!

@wolfsteelbuildings

5 ай бұрын

Thank you! We hope our channel is of assistance for you!

What would be the best option for a larger two story building. Let's say a 60' x 120' and 24 ' height. Huge garage/workshop on the 1st floor and possible living quarters/bonus area upstairs. Or am I at a whole new ballgame with a red iron insulated building?

@wolfsteelbuildings

10 ай бұрын

Your best bet is a Red Iron Bolt Up building. You will need to have engineering plans with the building. Definitely doable!

TKU for your great information 🙏🏼🤩 Sub’d 👍

@wolfsteelbuildings

2 ай бұрын

We're glad you liked it!! Thanks for the sub!

Do you service the Jefferson County area? Specifically Port Neches, TX. Really enjoyed the video and truly appreciated the transparency of cost.

@wolfsteelbuildings

10 ай бұрын

Thank you Ed! Yes we do service that area. Shoot us over a submission of what you're interested in. Build it here: wolfsteelbuildings.com/shop/ or an email at Sales@WolfSteelBuildings.com

Great video, have you done radiant heat in any metal buildings? I am hoping one day to build a 60x 80 and was wondering if that would be an efficient way to heat it.

@wolfsteelbuildings

11 ай бұрын

I haven’t done a radiant heat system for a metal building! It would be a great question to ask maybe in the Facebook groups for opinions!

@paulpryor850

10 ай бұрын

I am no expert by any means! However, I'll share my experience with radiant heat in my home. It's great to walk across those floors in the fall and winter time. Unfortunately, though, it didn't negate having another heating system in my residence. Or the cost to protect this investment in case of a lengthy power outage. So, you might want to consider a backup power system. I considered going this route, but it was much cheaper to install a force air system. Along with the benefits of adding A/C. Which was a must for me! You gotta weigh the costs and know exactly what you want and need. Before you can tackle these projects and also be open to contingency plans. Good luck with your project!

@wolfsteelbuildings

10 ай бұрын

@@paulpryor850 thanks for that insight!

Awesome information. I do have a question though. Do the legs get upgraded only as the building gets taller or are they also upgraded with width when the trusses upgrade? So if you were to be building a metal building over 12’ tall; would it be worth it to stay at the 30’ width?

@wolfsteelbuildings

29 күн бұрын

Great question. To answer your question- both. The legs get upgrades when the building gets taller AND when it surpasses the 30' width. When the building goes into the 30'+ commercial trussing that includes the legs as well. Compare the pricing for the 30' width 12' tall+ to the commercial and see which is best for you. Don't forget to see HOW the building is being built when comparing pricing. I hope my answer helps. If anything reach out again so I can elaborate!

Thanks.

@wolfsteelbuildings

5 ай бұрын

You're welcome! thank you for following us on our channel!

I love your channel. Thank you for taking your time to care and provide all the important information to help one make an informative decision. Do you guys service mid to north Florida ?

@wolfsteelbuildings

11 ай бұрын

Your welcome sir! We do our best! Unfortunately, not yet! Only Texas for the moment.

@arboatrentals

11 ай бұрын

you think by this year you will?@@wolfsteelbuildings

Looking to build a 30x40x12. Learned so much from this video. I'm in SoCal and wish i could hire your guys. Do you know anyone in this area who does good work?

@wolfsteelbuildings

3 ай бұрын

Unfortunately we do not.. We have not worked in the area. Hopefully our videos give you some insight!

Does the over 30’ width cost increase also apply to red iron buildings?

@wolfsteelbuildings

11 ай бұрын

It wouldn’t! Red Irons are priced differently. Will soon do pricing factors for red iron!

Do you guys service the Augusta, GA. area? If not could you recommend a company that would, Thank you in advance

@wolfsteelbuildings

7 ай бұрын

We do not service GA. We have not worked in that state and do not have much experience... Here is the companies I found in that area ranked based on google reviews. - Augusta Sheds - Magnolia Buildings - Armour Metals - Smith's Buildings LLC Sorry we couldn't have been much assistance! Best of luck on your project

nw arkansas ,do you come here? i want 24x35, frameout for sectional verticle roof,horizontal sides,i want a 2 post vehicle lift, is 11 foot wall tall enough ,i use trucks,thanks

@wolfsteelbuildings

11 ай бұрын

We do service Tubular Buildings here, Could you provide your zip code to us to be sure? We'd love to take on your project! Shoot us an email at sales@wolfsteelbuildings.com

What are the dimensions and price for the white and back building in the video that had 2 overhead doors on the front?

@wolfsteelbuildings

29 күн бұрын

Hi Jeremy, Not sure which you were referring to so I added both of these. -The black and white building we have on here has roll up doors. Here is the link: kzread.info/dash/bejne/eXuixLVppMK_Z5M.html -There is a pewter grey building with overhead doors. Here is the link: kzread.info/dash/bejne/pn2JvM5tlcbUc9I.html I hope I got that right - if not let me know and I can redirect you. Remember pricing may be different depending on various factors. -Ana

How much would the price increase with 15'+ eaves on a 30'x40'?

@wolfsteelbuildings

9 ай бұрын

Hey Mark! Prices vary by location. Please shoot us an email at sales@wolfsteelbuildings.com and share your zip code with us to ensure accuracy regarding the price increase!

좋아요❤😂😊

@wolfsteelbuildings

7 ай бұрын

Thank you!

Do you guys do Kentucky or know a reputable group

@wolfsteelbuildings

3 ай бұрын

We do not cover KY, or would not have much insight as we have not worked in that area Brock... Here is the top rated google companies I found that Rhino Metal Buildings Legacy Metals Patriot Metals We have not worked with these companies. This is based on a quick google search. Sorry we couldnt be more assistance!

Do you cover Fannin county Texas?

@wolfsteelbuildings

5 ай бұрын

yes sir we do! we do a lot of work in that area. Anything specific we could help you with?

@gallmanconstruction728

5 ай бұрын

@@wolfsteelbuildings first I need to buy some land. Then I plan to build a 30x40 or 30x50-60 vertical exterior with panel roll up doors and roof with eaves.

@wolfsteelbuildings

5 ай бұрын

Let us know when get that situated! we'd love to help you with that project. Make sure to look into the building requirements for the property you buy. Best of luck! We'll be in touch

Do you service az

@wolfsteelbuildings

7 ай бұрын

We do not. We service Texas

The click sounds made me turn this off. Annoying as hell .

@wolfsteelbuildings

9 ай бұрын

Thanks for the feedback Wayne! Definitely not our intention to be "Annoying as h*ll" We will be adjusting in future videos.

These guys lie about their pricing

@wolfsteelbuildings

3 ай бұрын

Sorry Mary and you feel like this, Bruce! We know you were exploring pricing for different sizes. We did price your buildings according to your zip code and regulations. We do like to state it varies by location and site prep is never included in pricing since we can't see your site. I'll have Ernesto reach out to you and see how we can work with you if this is something you're still open to.

🔥 Wolf steel shop coming soon! 🫡 2024

@wolfsteelbuildings

11 ай бұрын

AYYEEE!! We're excited to see what you design. ThePack is waiting!!