5 MISTAKES Beginners Make When Soldering Copper Pipe | GOT2LEARN
Here are 5 common mistakes that beginners make when soldering a copper joint and how to prevent them.
Join my plumbing forum for FREE!
got2learn.free...
Amazon affiliate links to all the products I used in this video:
AutoCut Pipe Cutter 1/2": amzn.to/2XlyqAn
AutoCut Pipe Cutter 3/4: amzn.to/3gPmhhz
Superior Tool 1/2" Cleaning Attachment: amzn.to/2kwBMBK
Pencil Torch: amzn.to/2U3OTaa
Fitting brush 4 in 1: amzn.to/45ELin6
Propane gas(Blue bottle): amzn.to/3tpWAOo
Lead-free tinning flux: amzn.to/2U3abEW
Flux brushes: amzn.to/3S1xsrK
Lead-free solder (Sterling): amzn.to/3ZT6Jzn
Flame protector: amzn.to/3tzkcQV
Abrasive pads: amzn.to/2XaY6kT
Pencil reamer: amzn.to/2tBuhKW
All-in-one deburring tool: amzn.to/3B9dLUv
DISCLAIMER: Got2Learn is NOT responsible for any damage done to a property of which the plumbing wasn't done by a professional, I do not recommend doing your own plumbing if you are unsure about what you are doing, always hire a LICENSED contractor when doing any type of plumbing so you can be covered by insurances if something does happen, these videos are for entertainment purposes only!
Пікірлер: 770
Join my plumbing forum for free: got2learn.freeforums.net/
I've been plumbing for 38years and the coronavirus has forced me to watch this 😂 a few tips 1, if you accidentally over heat the fitting, remove heat and brush a little flux over the joint. 2, make sure there is no water dripping through the pipe whatsoever.3, always make sure you have a open end somewhere to take away any pressure built up by the heat. 4 don't knock the joint while it's cooling. The bigger the joint the longer it will take to cool.
@Got2Learn
4 жыл бұрын
All 3 are good tips, thanks Philip!! :)
@jdr03272
Жыл бұрын
Is there any reason NOT to use tinning flux? It seems like an extra layer of safety but is there any downside to it?
@ANewEvilRising
Жыл бұрын
@@jdr03272 what I been wondering
@jdr03272
Жыл бұрын
@@Got2Learn can you comment on this? I can't find the answer anywhere?
@Got2Learn
Жыл бұрын
It can give a false sense that the joint is properly soldered, this paste doesn't replace a bad soldering technic if that makes sense.
I'm not a plumber, but so much of my copper soldering experience came from my dad taking the time to teach me when I was younger. Most importantly, he would have me practice many times on scrap pieces so I would learn the "art" of soldering. There's no shortcut to doing it correctly. It really takes practice. It has saved me a lot of $$ over the years by DIYing so many plumbing jobs around the house. Your videos are awesome!!
@Got2Learn
4 жыл бұрын
Yes, it truly is an art, thanks for your positive vibes Burt!
@davecao908
Жыл бұрын
Nice
Can you imagine when being taught any kind of skill set whether it's plumbing, welding, framing, drywall, etc... and when you do exactly what you were taught and pipes still leak, welds break, etc??? This channel tells you not ONLY HOW TO DO shit, but ALSO TELLS YOU THINGS to AVOID DOING! Golden 1/2" rule and no leaks, heat distribution, how too much heat and too little heat will have their specific results (displays of it in video also! What???) I know so many home owners being a former Realtor and thus knowing these home owners as DIYers and I'm going to DEFINITELY share this channel, NO FKKN DOUBT! I'm so stoked about this channel. THANK YOU...
@Got2Learn
Ай бұрын
@@charliecarter1878 you have the best comments brother 😏
This is the most random video I’ve ever been recommended 🤷♂️👍 but still keep up the good work
@Got2Learn
3 жыл бұрын
🤘🤘🤘
@bornaskovran9303
2 жыл бұрын
But 1 month later... Shit...
Yesterday, I was DIY-ing a repair on my main water line. You videos literally just saved me thousands of dollars! I used your tricks and your preparation steps and got a perfect joint with no leaks! Literally thank you soooo much
@Got2Learn
3 жыл бұрын
Awesome, glad to hear, please share if you can, it really helps!
@stevenwolf2647
3 жыл бұрын
@@Got2Learn absolutely man! thanks again!!!
@Got2Learn
3 жыл бұрын
@@stevenwolf2647 Thanks again Steven!
@GRyder261
2 жыл бұрын
i hope you dont have use copperpipes for fresh water which you drink.
@stefan-ox8qs
2 жыл бұрын
@@GRyder261 copper is save lead is the one that was not save.(and in my country even forbidden to use for water.
Nice job. Clear, concise and no jazzy music to dustract from content. Thanks and greetings from Spain.
Learned how to solder when I was 10 by my father . He was a licensed pipe fitter . And still solder now as part of my work
@Got2Learn
4 жыл бұрын
God bless.
@davecao908
Жыл бұрын
Good
I’m actually an electrician who’s wanting to get my downstairs loo (toilet) refurb finished by first fixing new runs of hot and cold pipes. I’m in the UK but I am certain all the principles are exactly the same, it’s just about using your common sense and making sure you don’t apply too little flux, heat, solder and vice versa. Very useful information and educational to the newbies who haven’t really done much plumbing.
@Got2Learn
2 жыл бұрын
😇😇😇🤙🤙🤙
I’ve been soldering copper pipes for decades as I renovated homes. Now I realize that I was making many mistakes and had to re-do joints. Thank you for showing me the right way. I like the rule of 1/2” of solder for a half inch pipe
Ex plumber here. I would move the torch around on all size fittings, not just the bigger sizes. Great video btw! Good diagrams and graphics too.
@Got2Learn
3 жыл бұрын
👌👌👌
@savebandit1017
2 жыл бұрын
Plumbers these days dont use copper pipes anymore. Unless they are 70 years old
@thechops2000
2 жыл бұрын
@@savebandit1017I used SharkBite connectors and pex, to connect new shut offs to the copper lines in my laundry room (pinhole was spraying water 4 ft). It’s true-it’s not used in new construction-but it’s crucial to know how to repair copper properly, since there are millions upon millions of homes with copper. If you don’t want pex, don’t have enough grip to replace all your existing lines or even call a plumber for $200/hr, you gotta know how to fix that sh*t right. I thought the video was really helpful, you can never know too much information. 💚
Just soldered 25 elbows after a 50 year gap in soldering copper pipe. The first and most important thing of all is to get a pwerful light shining on your joint, so you can see when the solder runs. Get it clean, including the END rim of the pipe, put the flux on, push the pipe in, heat the joint, apply the solder to the joint when its hot enough, clean up, pressure test - job done. The BIG problem with real life plumbing is often the joint is inaccessible, so if, like me you leave 50 years between plumbing jobs, practice on a few joints on your workbench. Always shield your flame from any nearby wood as you could start a smoulder fire without knowing it. Don't breathe the fumes from solder/ flux. When you talk to your mates about soldering, remember its got an 'L' in it!
Just performed an emergency repair on mixing valve that was bumped during my remodel effort. I was intending to cap the lines and replace the mixing valve later but it turned into an "emergency, do it today" situation so I watched this video (and one other of yours) and managed to cut the two supply pipes leading to the mixing valve and cap them without any leaks. My solder joints look better than I was expecting but far from pro level. Just glad there are no leaks. Thanks for the amazing content on your channel. You've saved me tons of money already
@Got2Learn
2 жыл бұрын
🙏🙏🙏
Heck who needs plumbing school when you have these kind of videos here on youtube : )
@Got2Learn
3 жыл бұрын
😉😉😉
@kcobabe
3 жыл бұрын
Mmm, because there's codes and inspections 😶
I am an electrical engineer. Soldering pipes is apparently very similar to soldering PCB :D Also, I can relate to the "the solder follows the heat - the same is true for PCB"
Great video. This was very helpful to me as a DIYer. One other mistake is not making sure the pipe is totally dry. I got into a mess on my first attempt because my stop cock wasn't shutting off properly and was letting a small amount of water by.
Here are all the tools and materials I used in this video (affiliate links): Pencil Torch: amzn.to/2U3OTaa Propane gas(Blue bottle): amzn.to/2BOhnh7 Lead-free tinning flux: amzn.to/2U3abEW Lead-free flux(water soluble): amzn.to/2XjaYn9 Lead-free solder: amzn.to/2yPvjso Flux brushes: amzn.to/2T8ROBc 3M Scuff Pads (Coarse): amzn.to/2uwPMkc
It may seem a lil' OCD, but I always tape up or cap my un-used tubing. Less cleaning is required when I need to use it. Another excellent video.
@Got2Learn
4 жыл бұрын
Cool trick man..!
can't get enough of these! you are soooo good at making sure these techniques are understood.! bravo
@Got2Learn
4 жыл бұрын
Wow, thank you so much Thor, I really appreciate your comment!
My 2 cents: as heating goes I always start with a little heat on pipe first as this will expand & hold to fitting, then move heat all around fitting (as stated, soldier will flow to heat) I believe it's best to draw the soldier to the top of the fitting (heat top & apply soldier to bottom & draw up) For cleaning (as was taught to me by old schooler) & works well, no problems yet, is to give a small wipe of flux to joint & before it completely cools wipe with a damp cloth.
@marcus2491
4 жыл бұрын
JOHN McGINLEY you my friend are right
@emperorfancypants2512
2 жыл бұрын
Or use press couplings with rubber ring who always seal 100% without problem
@sully7750cosmo
Жыл бұрын
best tip from this complete amateur is to flux the inside of the fitting/sleeve only. use a very thin even coat. heat from underneath mostly and always have the flame on the opposite side of the fitting when you're applying solder. the tip of the flame should be pointed away the fitting so you don't melt the solder with the flame. also it takes around 10 seconds to heat the joint appropriately. first one sucked but after using this advice it looks a LOT better the second try.
Very good video. Especially the tip about half inch fitting half inch solder. Always wondered about that when I used to sweat copper a lot.
As a plumber that only put in copper piping and the biggest mistake leading to leaks is...not stirring the flux.flux is made up of defferent metals that pull away from itself.everytime you use flux..stir it
@Got2Learn
3 жыл бұрын
I have a video coming on that soon, cheers!
At first you sounded like my wife when you said Let me show you five things you might be doing wrong! Then it got better 🤣. Your vids are always educational and informative. Keep up the great work mon ami.
@Got2Learn
4 жыл бұрын
Thank Viper6, that made me laugh hehehe, have a good one )
I recently installed my own water heater and tip's from one of your videos helped me achieve clean leak free solder joints, thanks ! 👍
@Got2Learn
3 жыл бұрын
Nice work!!!!
Thank you !!!!! I am spanish and there is nothing better than this chanell for learning plumbing. Thannk you a lot !!!!!
@Got2Learn
3 жыл бұрын
You are welcome 😊
The amount of solder to put into a joint was very helpful. I didn’t know when to stop.
I'm not even doing any plumbing and I found this video exceptionally informative! Thanks!
@Got2Learn
4 жыл бұрын
Glad it was helpful! Thanks for your kind comment ;)
In lab at school I always had a hard time getting the hang of soldering but did well with brazing. Guess I always felt as though I didn't use enough then would end up overheating. I like how you do the half inch bend, I'll remember that.
Being a plumber size of copper pipes matter, larger pipes you need to heat up all around smaller pipes you don’t need to. Bottom line is heat up whole joint then place your torch into one spot then start touching solder to the pipe on opposite side of torch flame once solder is melting move solder all around the joint 360 degree and remove heat while doing it. Amount of flux doesn’t matter as long as you smear both pipe and joint, what matters is how clean your pipe end is and the fitting. Works best, no leaks. 🤔👍
It's amazing how many people out there believe that copper and drain pipes do not need to be deburred and reamed.Great video as usual dude,plumb on.
@Got2Learn
4 жыл бұрын
I know it's crazy, oh well ;)
@nelsonechevarria7009
4 жыл бұрын
@@Got2Learn It certainly is,I recently saw a youtube video where a guy had a pin hole leak in one of the copper pipes under his kitchen sink and I couldn't believe what the guy said.The guy was using a compression union because of course it's not a good idea to solder copper pipe in closed areas such as under kitchen sink cabinet.What shocked me is how the guy was ignorant enough to claim that copper pipe does not need to be cleaned when using compression unions and he shocked me even more because the guy failed to ream the copper pipe after he cut it to put the compression union on the copper pipe.It totally sucks how people with very little to no experience/knowledge come on here and post videos supposedly to help others.Granted,people take the time to make videos and their time and effort should be appreciated but when you have people with little to no experience/knowledge making videos saying that they do not agree with what is standard installation procedure that's a really bad situation.Those of us with experience know that when pipes are not reamed there is a great possibility that pin holes will develope in the pipes in question but I guess "extra special" people feel they do not need to do things properly because they really don't give a shit.It's a crying shame and waste of time and materials.
4 жыл бұрын
if it was a great video, he would have mentioned that
@Got2Learn
4 жыл бұрын
@Stella smith huh?
@nelsonechevarria7009
4 жыл бұрын
@ The man repeats the importance of deburring and reaming copper pipe before soldering it in other videos.You can't expect the man to keep repeating what he has already stressed in other videos.Anyone that's truely interested in proper copper pipe preparation before soldering can search for that information.It's not as if proper copper pipe preparation before soldering is a government secret.
This weekend I replaced a broken bathroom faucet. The supply line valves were the worthless kind with the rubber gasket that deteriorates within a few years, so they completely failed and I had to turn the water off for the entire house to do the work. Therefore, I decided to replace the supply valves as well, with 1/4 turn valves. I had soldered copper pipe joints a couple of times in years past without leaks, but this time it took me three tries to get the valves soldered on correctly. After try #2, I looked up this video. I think I did 2 things wrong: first, my flux was years old and had turned a much darker color than new flux (and had a gritty looking texture). When I saw it I thought, "can flux go bad?" Well... yes, apparently. Also, I was so afraid of starting a fire or damaging the valve that I think I just didn't heat the joint enough. After seeing your video, I tried again and it finally worked with no leaks. A two hour job ended up taking all day, complete with several trips to Home Depot (did I mention I bought the wrong size supply lines as well?) Thanks for posting this.
@alejandroc7357
2 жыл бұрын
I feel your pain 😞
Good video. Most important thing not mentioned WIPE THE JOINTS TO REMOVE ANY LEFTOVER FLUX. Takes many years but it eventually eats the solder away and the joints leak. I have a house like it, it’s a real pain to deal with.
Great straight forward video I work with brass , photo etch In hobby models , i have no tried soldering brass parts yet, just super glue, i will now in some cases. This was a great video Thank you
@Got2Learn
3 жыл бұрын
🤘🤘🤘
Re. correct heat: I use regular propane / butane torch gently (have done for decades) to avoid overheating & burning the flux, its slightly slower, slightly cooler, so guess what? The solder in the joints cools & solidifies quicker, less risk of crystallisation if you wipe it too soon. And its a whole lot cheaper than MAPP gas. Nice vid as usual, thanks.
@theondebray
3 жыл бұрын
PS: And using the flame too close, so the joint is in the oxidation zone. I only use MAPP gas on big fittings. Gently does it every time.
@StilettoSniper
3 жыл бұрын
Smart approach, I have discovered the same thing. No need for anything more than propane if you are working with typical residential size plumbing (1/2 - 3/4 - 1"). Over that, I would recommend an air-acetylene torch because the MAP/Pro gas they sell today is not worth 2x the price of propane (only 3.6% hotter). You cannot buy real MAPP gas in the US anymore, which was much hotter than propane, as manufacturing stopped in 2008.
The residual water is what killed my attempt at repairing toilet quarter valve on the first floor. I let the water drain for 20-30 minutes by having the water valves open throughout the house. There was no water in the pipe, but when the joint was prepped and ready, then heated, the water kept getting pulled to the joint and then boiled- the flux all would then burn off. I cut my losses and went with the sharkbite quarter turn ball valve and had it installed in about 10 minutes after following their directions for prep. I had a similar problem with my laundry box upgrade, but was able to get it all soldered properly 9 months ago. I would have done the bread-trick, but didn't know whether it would have come out through a quarter turn ball valve. This is a 50 year old house with some excessive plumbing runs instead of planned out T-offs the main circuit, so maybe that has something to do with it.
Just bought a pro-press, hopefully won't have to sweat anymore, but any contractor worth their weight in copper should know these points. Good vid, thx!
@Got2Learn
3 жыл бұрын
🤘😇
Clicked on the video just to see the comments about ytb recommendations
@zirkq
3 жыл бұрын
same 😭
Always been told to start from the bottom of the joint since heat rises usually dont require much solder on commercial Vavs and heat the pipe before the fitting.
Just getting a house and the upstairs wastewater pipe has a leak so I'm going to have to fix it.. this was a really informative video on how to solder and sweat joints thank you.
Haven't soldered in a long ass time but watching videos like these assure me that I still remember.. .. my brother has a leak in his restroom sink that I'll probably have to fix when he asks me.. but awesome video :)..
@Got2Learn
4 жыл бұрын
Awesome, have fun with the fix ;)
the first time i tried out soldering in school i had no leaks. honestly i found it one of the funniest thing that I learned in electrical technology
This video just convinced me to get a few practice pieces before I replace the sweat valve under my kitchen sink.
@Got2Learn
3 жыл бұрын
👌👌👌
Flux can warns against ingesting it, solder warns against ingesting it, but we put both in our water system? Pex for the win!
@freemanz4051
3 жыл бұрын
Agree on FLUX, but the metallurgy of SOLDER is complicated. Got any lead-mercury fillings? I do. I WAS afraid... but I'm not any more. Amalgams not associated with blood metal levels! Lookin at PEX, it better be PHTHALATE-FREE!
@user-fi1xu1pp7p
3 жыл бұрын
True but our water supply is treated with heavy chemicals to begin with. All I can say is just don't swallow it while brushing your teeth and make sure you use soap in the shower. Lol but if you are extremely worried, they have filters you can place in your faucets, so you can do that and change them monthly if you want. 🤷🏾♂️
@420JackG
3 жыл бұрын
Until we find out that pex has been leeching all sorts of weird stuff that mimics hormones or messes with our endocrine systems... no free rides, in my estimation.
@hightidelowtide6380
3 жыл бұрын
If the copper is clean enough, you don't need flux...
@Got2Learn
3 жыл бұрын
You always need flux when soldering copper, always.
You use to be able to get a product called Fluxsolder. It was grey in color and contained solder. Just heating it activated the solder and was suppose to be an adequate amount but we always added more solder.
@Got2Learn
3 жыл бұрын
Still available, called tinning flux 👌
Your videos are great, thank you for the clear simple explanation, i noticed after watching many of your videos about soldering, they have practically the same information in all of them.
@Got2Learn
4 жыл бұрын
Thanks man! Yeah i'll try to explain one particular thing more in detail or a different way sometimes so it could be understood by more people ;)
Thick metal areas take more heat energy to get hot than thin metal areas. This is one reason to concentrate heat on the thicker side of a joint (especially vales or other thick bronze castings). The thicker side will heat the thinner side by conduction much more evenly than the reverse. A razor blade can be heated to a controllable temperature by placing it on a hot cast iron stove. If you try to heat a cast iron stove buy placing a hot razor blade on it you will melt the blade before the cast iron stove even gets warm.
Short and to the point, just how I like my youtube videos.
@Got2Learn
3 жыл бұрын
:) thanks!
Good video.... I have been soldering for 20+ years.... nailed it
@Got2Learn
3 жыл бұрын
👌👌👌😇😇😇
Thank you for the great video! I always had problems with heat distribution on 3/4" copper pipe- awkward angle. Next time, I'm going to use Map-pro, higher temperature gas (yellow can). The sharkbit adapters are a great alternative too. I didn't know if my brazing was good enough, so i switched to sharkbite fittings on my water heater. It turns out, my brazing was fine and i should have left it. Yet, there was no way for a novice, like me, to know for sure if my brazing worked. Practice is fine, but in an awkward, confined space, it's tough.
@Got2Learn
3 жыл бұрын
🤘🤘🤘
I'm amazed I had no leaks having done this before seeing this video
Great video. Thank you for all the great tips and valuable information. It certainly has helped my understand the concept. I'm in the process of replacing a copper line in my crawl space.
@Got2Learn
10 ай бұрын
You're very welcome!!!
#6 Do not run copper pipe through metal stud walls without grommets to keep the copper from touching the metal stud.
@Got2Learn
4 жыл бұрын
Absolutely, a must!
Lol should have watched this before soldering a bunch of supply lines last week. Good to know about the flux turning colors and the flame color. That would explain why some of my connections didn’t want to take solder and others were giving me perfect results. Thanks!
@Got2Learn
4 жыл бұрын
You bet, there will always be another joint to solder, have a great day sir!
"If you see a green flame, you've passed the point of burning off the Flux and solder, and are now burning copper like a candle"
Thanks will keep in mind. Im new with it. I have soldered a pipe but fir small project. Probably too much solder. But for what im doing it wont matter.
@Got2Learn
4 жыл бұрын
;)))
3:57 That's a great idea, thanks.
@Got2Learn
4 жыл бұрын
Thanks cat ;)
lots of great tips bro, even for somebody thats been doing it along time but just wants to get better
@Got2Learn
Жыл бұрын
🥰🥰🥰
Yet another piece of knowledge that I will never use, thanks KZread!
@Got2Learn
3 жыл бұрын
🤣🤣🤣
@johnforrest2654
3 жыл бұрын
Well if you have a leak and confidence you might do it. If not at least you'll know if the guy who does the repair is making these mistakes and you can call a better plumber.
@baivulcho
3 жыл бұрын
@@johnforrest2654 Only issue is that in my country and maybe the entire continent nobody uses copper plumbing :D
@johnforrest2654
3 жыл бұрын
@@baivulcho Ah you got me there. Still free education is never useless in my opinion. What do they use where you're from?
@baivulcho
3 жыл бұрын
@@johnforrest2654 I'm no plumber, but indoors they install mostly PP pipes for the cold and hot water, as well as PP pipes with some metal lining inside for the heating.
it is an art! this goes deep
@T.E.P.
2 жыл бұрын
Hi you it’s me you … need some G2L merch
Do you have any advice on when you need to flush flux out of water lines? Do you need to do it after a small job such as putting in a shut-off valve and a few couplings? The Oatey copper installation FAQs says to use a TSP and bleach solution and that it's important to do if not using water soluble fluxes. Thanks for the videos, they've helped me a lot!
@Got2Learn
4 жыл бұрын
If you did the solder job well, it should need much flushing for a few joints, but I would just let the water run for a good 5 minutes and you should be good.
Man I wish I found this video sooner. I’ve been using too much flux and my solder is crap. Hurst went light on the flux and soldered perfectly
@Got2Learn
Жыл бұрын
🙏
Love nowadays recommendations but actually really interesting and good video!
@Got2Learn
3 жыл бұрын
😇😇😇
Its 2.34 am in india and i am watching a video of joining a copper pipe man what breakup does to a person's life.🥺
@Got2Learn
3 жыл бұрын
Sorry to hear...keep on plumbin'
The biggest mistake is holding the light while your dad shows you how to solder the copper lines under the house. Those eyebrows aren't coming back for at least a month.
Now if I'm held hostage and the only way to get away is to share some soldering facts I guess I'm solid.
@Got2Learn
4 жыл бұрын
;)
Great video! The solder measuring trick is ingeneous, will definitely be trying that
@Got2Learn
3 жыл бұрын
💎💎💎
Soldering is a "capillary" action.When you finally achieve "the Touch",You will know exactly how Much solder and flux to use!
@joshuabastion995
2 жыл бұрын
That's a handy perspective to be made aware of, especially at this specific stage of learning another new skill IMC
Great video I shure remember my younger days.
@Got2Learn
4 жыл бұрын
Hehe, it's always fun to go back hehe, thanks Tuna )
Watching people soldering is satisfying.
@Got2Learn
4 жыл бұрын
Hehe, ASMR kinda ;)
Videos like this are SO helpful!
Очень интересный и полезный был урок! Спасибо вам!
You should all do your own plumbing, it's super easy. 👌
this info is more than valueable than money...thank you
@Got2Learn
3 жыл бұрын
🤗🤗🤗
Excellent tutorial, thank you so much for sharing I found this very insightful on several different counts. I especially appreciated learning that flux can potentially eat a hole through the line. I was recently on a job that they had a leak in the middle of a line and we couldn't understand why. Thanks again, take care and God bless🙏
@Got2Learn
2 жыл бұрын
🙏🙏🙏
I had a pinhole leak in a joint where two 45 elbows were used. There was lot of excess solder inside. Half a year later the same type of leak occurred at another bend of the same water line. People say Cooper is best but more importantly it needs to be done correctly.
Muy buen video
excellant tips just replaced my water heater and this video was a great help. t.x.
@Got2Learn
Жыл бұрын
👍🤜🤛
Or just use quality flux. I use Rothenberger and heat the pipe until the flux is turning from darker grey to shinning silver. All the time is perfect temperature.
@Got2Learn
4 жыл бұрын
Great tip!
Thank you very much, I'm going help my girlfriend do this minor plumbing for her washer that's outside her house into her shed where her washer is. Currently she has NO plumbing in there what so ever, I will do it for her in just a few days, hopefully this weather let's up, it's currently snowing and freezing OMG, 😱😵😳😬😖 thank you✌️👍
@Got2Learn
3 жыл бұрын
🤘🤘🤘
Sou do Brasil, mas esse vídeo é esse canal irá me ajudar muito. Parabéns
Your video tutorial skills are on Parr with your soldering skills.,.this is an awesome video👍. Loved your use of graphics and sectional views in explaining what happens during the soldering process. I imagine these videos must take quite a bit of time to make so thank you bro - 10/10
@Got2Learn
Жыл бұрын
😎😇
Great, thorough video, thanks!
Excelente vídeo, thanks 👍👍👍👍👍👊👊👊👊
Utility Flux is my favorite. Only heat the fitting. Flick those dog nuts. Use Sterling Solder. When the fitting just starts to blue you remove the flame and roll the solder. Also the amount of solder is for the fitting....1/2" - 2" beyond that your braze with 15% Sil-fos and do not use Flux because is has a Flux in it.
i can feel like i'll be good at plumbing with these kinda video very very soon.
@Got2Learn
Жыл бұрын
🙏🙏🙏
I have not had issues soldering but great video
@Got2Learn
4 жыл бұрын
Good job man ;)
I dont do plumbing but i still watch it cause its the only thing keeping me entertained in my sad pathetic life
@Got2Learn
3 жыл бұрын
GOOD!
Number three certainly helps me.
Thanks, vary informative, and I just figured out why all our old pipe in our shop are starting to get tiny pin holes in them, too much flux I guess ....or it could just be that their that old too I guess
@Got2Learn
4 жыл бұрын
Glad to help
@goaheadmakeourdayscooterpe9644
3 жыл бұрын
If your getting your water from a well you could have acidic water and require a acid neutalizer in system. Get the ph of your water tested. Speaking from experience.
@joshmac7245
3 жыл бұрын
@@goaheadmakeourdayscooterpe9644 it's a city feed. Judging by the age of the pipes it's probably an age , flux and the fact that our work area can get vary humid . But I'll keep that in mind for the future
I don't understand why you have so many hatter .. you've given me the confidence to do this
@Got2Learn
3 жыл бұрын
There will always be haters Randy.
Nice timing tomorrow im going to a trash job interview doing this for minimal wage hope i dont get a job and not lose another body part
Works for me thanks for the helpful hints
Never knew the 1/2 solder for 1/2 pipe trick. Thanks.
@Got2Learn
3 жыл бұрын
👌👌👌
Try heating the manufacture sticker and peeling it off
I never hear you about deburring the edge of the cut copper pipe, it always seems important to me. Any tips on how to deburr and tools for it?
@Got2Learn
4 жыл бұрын
kzread.info/dash/bejne/iX192KmAZtS0erA.html
Should mention about joining new copper pipe to a existing system. Making sure to remove all water from the area trying to solder to.
@Got2Learn
4 жыл бұрын
Yes, very important, i'll probably do a "part 2" of this video when I get a chance, thanks Barry!
You have shared a knowledge very extensively. Much thanks!
@Got2Learn
2 жыл бұрын
My pleasure 😊
Stay safe Bro’ Thanks for thé video.
@Got2Learn
4 жыл бұрын
Same for you man!
Welp. Guess I'll be headed back to the tub spout tomorrow.
Thanks to you for your advices!