This feels like if Bob Ross owned a Jeep and did mods. I love it

@AStanton1966

6 ай бұрын

It would be a "happy" jeep.

Would've taken me two days without the filming. It's great that you always put Regina's needs at the top of the list, B-man. Excellent video, as always.

@rubiconadventurewithscotty3258

Жыл бұрын

Nailed it - Filiming is a time consumer, but Brad makes it seem natural

Great reminder of things to look for with regard to preventative maintenance. Regina is well taken care of. 👍

That wiper setup is sweet, I really like that. It would be cool if someone other than Mopar offered this, because I can see it being practical on more than just wranglers for sure!

Good job Brad giving all of us a fine example of preventive maintenance and keeping an eye out for things that touch and can wear.

Great video Brad. I do all of my own installs as well, and found this very easy to follow along with. Having a steel DV8 hood, I never even thought about struts, until NOW. Thanks for that

This is exactly why I love the Jeep. You can make it exactly like you like it. There’s no standard anything. You can go completely basic and simple with a 3.6 and stick or go full auto with a 392, or even upgrade to a hellcat. And then you can go with bare-bones and soft-top, or full trim with leather and electric everything and hard-top. You can go with basic 17s and 31, or run with 24s and 40s. There’s no other vehicle other than probably a Harley that has this level of customization.

Always fun hangin' in the garage watchin' someone else do all the work. {grin} Nice maintenance/mods reminds me that I need to replace my bumpstops. Sure wish the stock "sliders" for an Xterra were like those on a jeep. And you're right about the hood struts for any vehicle. Those were one of the first mods I did. It gave me an extra 3 inches of lift, and it got that rod outta the way so I can work under the hood easier. Until next time... Travel safe.

Those prop rods are awesome. Airing up on a windy day with the hood up and the compressor connected to the battery. The hood bouncing around pulled the factory rod out of the hole. Fortunately, I was walking by and caught the hood before the rod damaged something in the engine compartment. I liked it so much, I bought some for our other 2 vehicles. Super easy install and worth every penny!

Always a treat waking up having coffee and seeing an upload up. Thanks for showing us some of these upgrades. Looking to put those hood struts on my JTR. Thanks Brad.

Thanks! I just did the hood struts, what an easy, functional upgrade. Love it.

Man that vector mounting setup is awesome. I wish they made something that cool for the ZJ's

I learn something new with every video Brad. Thanks again!

I love your videos of you and Regina out on the trail but I really love these videos even more cause I get to learn how to do these projects!

@TrailRecon

Жыл бұрын

Awesome! Thank you!

@bradmiller2464

Жыл бұрын

Also a good tip is to wrap with spiral cable wrap. To protect it. I use it to protect my brake lines. Because there is no good place to tie down the lines till I make them longer.

Great to see you back in the garage doing a few projects!!

These Jeep build videos are my favorite

Great video as always mate. I nearly had a heart attack when you threw the tools on the bonnet of the 392 though😂😂

what awesome upgrades. Looks like I am overdue for new rear lower bump stops on our JKU. I had been eyeing the hood struts before. So handy and seems to be easy enough for even me to install. Still a tad intimated with he rock lights to install myself, but we shall see. what a great video! Can't wait to see your Death Valley adventure Brad!

I just bought my first jeep and I want to thank you for all your videos! I'm watching all of them! Grazie Brad 😁 ciao da Bologna 🇮🇹

This video is living proof of WHY I subscribed! Many thanks!

Lota fun.... more of these videos, thanks.

Great add-ons. Kool-aid video. All a great aid. Rock on Trail Recon

I love my Vector Offroad bar on my JKU...great upgrade. I had some horrible luck with the hood struts though. They were so strong that closing the hood bent my hood hinge brackets. The bent enough to increase the gap between the cowl and the hood by around 3/8". It's very noticeable.

All great mods. If you haven't seen it, BadgeGlow makes a simple aux for the auxiliary switches on the JL that makes connecting to those switches much easier and is much cleaner than the loose wire ends that Jeep sent them out with.

Good job, master chief.

It took me 3 days to install pro rocks on my JKU and it took 3 days to run my 2 sets 12 total kc rock lights. I ended up running all the wiring in the frame and the bus bar I put under the seat belt reel and used the drain plugs as a grommet in the floor then up the frame to the switch pod. I have had zero issues and a very nice product. I will say took a lot longer then I thought it would

Great video Brad, super helpful and I'm getting all of these added to the 2020 JLUR!!

Those Jeeps looks as just coming out of the factory...👍👊

FWIW, love these upgrade videos so much. Trip videos are great, but I can't always keep up and always watch these first when they post.

I would love those rock lights

Love the hood struts, wiper blades and rock lights. I thought I was done with my JL ... obviously NOT! LOL

Smart mods and hard work 👍🏼👏🏼

Fun add on only for JK's is the ICEBOX bottle opener. Cool and functional!

Brad, I just received your T-Shirt, sticker, and patch. GREAT quality, everyone needs to buy these! Thank you

@TrailRecon

Жыл бұрын

Awesome, thank you for the support!

Headed to one of my favorite places, Death Valley. My family just loves it and if we don't go Jeepin in DV during Spring Break for 9-10 days, they are all bummed out. Great mods, we haven't put rock lights on the Jeep yet, I've really got to get to that project.

GM used to have its windshield washer nozzles on the wiper arms. They absolutely flooded the windshield and got it clean. Every car should be like that.

Great upgrades

I like that you do a lot of your own work !

Another add to my jeep today. Those struts were easy to install. Just like yours the driver side gave me some trouble. Thanks

We live with plenty of winter, I really like the factory steps in the JK & the JL, just to keep the sand/salt/slush off the Jeep!

Hey Brad, I just got my Outback Adventures Tailgate Table, Maxx Traxx with the mount and the guy ropes delivered from your site today while watching your video. I ordered on Nov 10th and got it all today on the 16th. That's pretty quick when you consider that Veterans Day was in there. Its all just in time for our Jeep camping trip starting in Roswell NM after Thanksgiving. Were going places we have not been before and some that we have been at.

I purchased this Mopar performance wiper kit. The nicest part is the Jeep logo on the wipers. In my opinion don't waste your hard earned cash, I went back to the OEM squirters. They work better. I also got the hood struts, those I love.! 👍

Just ordered the Visios .... had 8.5" of snow (first real snow with the Rubi4xe) Defrost & wipers were worthless! Thanks for all the great videos!

Great video! I think I saw your wife's jeep earlier today at the Miramar Commissary. I was 2 spots away from it in the parking lot. I have the big blue Silverado with offroad lights and radio antennas. You have a nice looking rig. Pointed it out to my boys. I think we passed each other in the commissary, too. I decided to not bother you as I figured you had things you needed to get done. I certainly did, too.

@regenakowitz

Жыл бұрын

I was there yesterday! You totally should have said hello...it would not have bothered me at all. ☺

Great video, just ordered those hood struts. You're right, they should be factory.

I have seen that accessory switch panel. I will have to look under the hood to see the other end. Thanks!

Excellent video!

Nice video mate.

Good to see your video! Love those rock lights. Will be curious how Death Valley is doing after the floods.

Nice video mate, i will steal your idea on that vector bar and wipers😏💪

Now that wiper upgrade I could use that on the ram trucks 👍🏻👍🏻

I think your videos are great !!! I enjoy watching your channel

@TrailRecon

Жыл бұрын

Thank you very much!

Factory JL/JT aux switches are the best value of any option Jeep has ever offered.

Nice features the bumpstop with "indentation"... I'd like to have in my JK "Mopar Visio Wiper Blades"!

3/8" drive Allen wrenches and a 3/8 low torque wrench. I would recommend that for the bead locks over just hand tightening

Anybody ever watch Trucks! With Stacey David? This reminded me of it.

I've been thinking about a dash mount, Not sure about the wiper fluid thing. I like the rock lights. Always good videos.

Another great video, be careful you don’t block airbags. Don’t want a iPad in the face if you ever got unlucky.

That Vector rail is the Bee's Knee's!!!

@TrailRecon

Жыл бұрын

Agree, I really like it!

Thanks for the video! I’m going to order those hood struts for my JK right now! Being a fairly short girl, getting the hood propped up can be a challenge 😂

Ey Brad! I am seeing a lot of changes in Regina's JLR!!! Reservoir shocks, Xtreme Recon wheels (those look SO GOOD with the yellow!)... We need a walk-around with the story on the upgrades and components on that Jeep! Looking NICE! Oh, and also, that silver in the JKUR still shines! Mint!

@regenakowitz

Жыл бұрын

We actually did a video last month, kzread.info/dash/bejne/ZHlrmpmRlb3WeMo.html.

You are going to need some gallons of windshield washer fluid to carry out with you because that new mod looks like it works great but squirts out a lot of fluid. Congrats!

I love little projects! I just picked up a jk. After years of TJs. Haha

@TrailRecon

Жыл бұрын

Thanks and congrats no the new JK!

@jones_edition

Жыл бұрын

@@TrailRecon love your channel! Hopefully I have half the channel as you down the road!

That is insane how heavy the aftermarket rails were.

Rey nice

Love hanging out in the garage with you, Brad! Really like those hood struts. Where'd you get them?

That hood struit mod is excellent ! I smashed my wrist with the Woman's hood. All my fault. I just simply let go of the hood and it clocked me 😅

Interesting that the KC Cyclones were the old version. Not the V2’s. Great video Brad, I think I am going to do those hood struts on my 392.

@TrailRecon

Жыл бұрын

I said they had been sitting on my shelf for a while! LOL!

@LOVE-62

Жыл бұрын

@@TrailRecon lol, ya you did say that. Take care man

@11:50 it rains a lot in SoCal in 2023!!! Lol

I love my hood struts! Except for the times that I want to lift the hood all the way back onto the roof for better access. It’s not hard to disconnect the struts but just inconvenient for this application.

That windshield though....🤣

might do rock lights on the Landy, although I don't lane at night often, it's handy if I do, that is if they don't just get mudded up and covered... 😛

Great video as always! Are you going to do an update on wiring those rock lights? Thanks!

Interesting that you need a puller to remove the JL's wipers. When I last removed the cowl off my '16 JK, I just removed the nut and they popped right off.

nice up grades

Great video as always. Curious why using hood struts when you can just open the hood all the up by resting on the windshield. I've done thus starting with my 03 TJ and continued on my 16 JK. Gives can lot more room to work and saved cash to put towards another project.

Nice video Brad! Enjoyed the installs and preventative maintenance. Did you sell the Bronco?

@TrailRecon

Жыл бұрын

Thanks, more on the Bronco in a future video.

I ent very nice 👍👍

Flipping that track bar bolt around should keep it from rubbing on the bump stops

those are MONSTER sized wheels dude. hahahahah

You already have them but I think a necessary and easy modification is front and rear differential covers. I’ve smacked my diffs coming off ledges before and that’s definitely something where you want to keep the spinny parts from touching the non spinny parts 🤣.

Hey Brad, please make a video of you having your windshield replaced on your 392!!

@TrailRecon

Жыл бұрын

Honestly, it's just a phone call and have the mobile guys come out, I don't do windshields.

Cool upgrade. One thing I wonder is whether you’ll find yourself going through washer fluid faster? Or will it even out because you’ll get more coverage quicker? Be interested to see if you notice a difference

@joetarlos

Жыл бұрын

You have a great point but I'd rather have my windows cleaned quicker and just carry extra solvent and refill the tank up with solvent...

@rubiconadventurewithscotty3258

Жыл бұрын

This wiper spray mod is for Heavy Duty soiling, leading he accumulated with washer spray and is not normal moderation at all. I like it. Also I put ppf film on all my cars windshields then ceramic coat the film so that any dirt or debris glide off with just a light oem spray.

I dol I like all your jeep am Thailand

The infomous Crack on the 392 windshield

Really enjoy your content. Maybe you did, but when you jacked up the JKU to install the bump stops... you didn't mention putting a jack stand in place so that you weren't just relying on the jack to hold up the vehicle. Jack stands are totally necessary when working under the vehicle. Can't assume people watching know this. It appeared that only the jack was in use. Again, love the channel, been following for years and have found your content extremely helpful. Cheers

Love the vector mounts but it sure would be nice if the bolts and washers that go into the posts were black I hate the way they reflect in the windshield.

Brad, a quick tip on putting those big tires and wheels back on from a former tire dealer. Grab a long crow bar and use it to lift and position the tire by placing it on the bottom edge of tire on bar and lifting with the bar. It will save your back i promise.

@isldtime

Жыл бұрын

Another tip I learned years on a D600 Dodge truck. Round nose shovel works well. And you might just need it for something else too!!

I ordered and installed the Redline Hood Struts... What a fantastic addition to my 2014 JK! Only took around a half an hour and yes the hardest part was the piece that went into the keyway of the hood its not skill or ability to get them in its just plane dumb luck and a couple of what the H**L's

Have a great trip in Death Valley. Last time you were at the Salt Tram base I was hoping you would turn West, up Lee Flat and over Cerro Gordo to see Brent Underwood. His "Ghost Town Living" YT channel is immensely popular but lacks content after a divide with his financier last year (I'm a fan). Any YT creator that visits Cerro Gordo has an immediate huge draw from YT SEARCH and I'll bet you get a huge bump in subscribers if you visit Cerro Gordo. Get him to take you into a mine and your viewership will skyrocket. Tim the Kiwi is the key "behind the scenes" person to all filmed adventures, be sure to meet him. Also, after you turn off of Saline Valley and proceed West into Lee FLat there are two well preserved historic miner's cabins that I bet you'd enjoy seeing; Lee Cabin and Nelson Cabin. Both miners had geological formations named after them; Lee Flat, Nelson Mountain Range. This region has many more as it was the largest Silver production in the USA at one time. In fact, you can also camp at the Top of the Salt Tram on the platform (pretty flat) or in the Tram cabin house. Enjoy the trip, Death Valley has teh best temperatures in all of USA now, smart trip!

Next time you are doing projects - do Regina's Jeep first. I like to see what you have in mind for hers.

@regenakowitz

Жыл бұрын

Right?! I gave Brad a hard time about that and ribbed him about my poor Jeep always being last. 😆

I’ve been dying to know. How wide is the stance on your jk? I absolutely love the way it looks!

Mate I'm far from being a Jeep person but fairdinkum I love the way they have 10000 attachments and upgrades that just bolt on, pity Toyota don't take a page out of Jeeps hand book.

Great video brotha. Do you still have the Power wagon?

I can't wait to buy my jeep, is my dream car; I'll follow you

Another great video! Do you have a link for the hood struts?

🇺🇲✌️🏆🤗 Thank you for sharing

Looks like you need a new windshield Brad

@drerskine

Жыл бұрын

Stood out like a zit on a supermodel. 😂

@TrailRecon

Жыл бұрын

LOL!

@alistaircropley1245

Жыл бұрын

Not cheap to replace, it's one of the more expensive windscreens around

@dixiemae5042

Жыл бұрын

Wouldn’t pass a VA inspection that’s for sure

@kenny3393

Жыл бұрын

Where can i get the hood strut kit?

Just Empty Every Pocket

Do you have any suggestions for a wench? Been combing through your videos and haven't found it yet if you do have one! Love your content and suggestions on just about everything JEEP. Thank you for all the videos