Thanks for this one bro . Really enjoyed it learned something..

Man she sounds good love that Cam sound, great job.

@FrostbiteRam

3 жыл бұрын

Thanks man🤙

Dam she sound nice!!! Keep them vids coming man!!! Nice shop too

@FrostbiteRam

5 жыл бұрын

Thanks bro 🤙

Sounds amazing

Dude sounds so much better

Is this what heaven sounds like ?

@FrostbiteRam

5 жыл бұрын

I hope🤣🤙

Bro I was like damn so straight pipe and some fat tips makes it sound cammed🤣 too good to be true. Then he mentioned the cam. Sounds like a beauty

@FrostbiteRam

Жыл бұрын

Lol👍

@taylorwhite03

Жыл бұрын

I don’t know man man sounds very similar but all that I have done is I remove the muffler kept the resonators so more or less it’s straight piped and I have a Vararam intake along with a Diablo Infinity. So basically it’s stock straight pipe and sounds really similar although he gets that clog clog sound similar to like a bad ass Mastercraft boat. This is the reason I will be following his lead lol

Great fab job an awesome idea! About to do this to mine!

@FrostbiteRam

5 жыл бұрын

Thanks 🤙

Says to stay safe and have fun… welded with t-shirt and shorts 😂

@FrostbiteRam

Жыл бұрын

😁

Sounds good《☆》Nice shop too🤓☻🤠

@FrostbiteRam

5 жыл бұрын

Thanks🤙

Oh my God. I have a 5.7 that’s straight piped already but I definitely need to put some new exhaust tips on

@FrostbiteRam

2 жыл бұрын

Definitely louder

I straight piped my 5th gen the other day! Sounds sick! I don’t even have headers.... Yet! Thanks for the heads up on the 5” tips they’re spendy at AFE !

@FrostbiteRam

4 жыл бұрын

That's awesome man

@DOC6.7

4 жыл бұрын

Frostbite Ram Your truck is what’s awesome!

@FrostbiteRam

4 жыл бұрын

Thanks man🍻

Those 5" tips made a big difference on mine with a Magnaflow, I bet they are loud straight piped.

@FrostbiteRam

5 жыл бұрын

Definitely

@billkozlowski4526

2 жыл бұрын

Is the magniflow still quiet I want something still quiet

@jamietownsend208

2 жыл бұрын

@@billkozlowski4526 yep

@billkozlowski4526

2 жыл бұрын

Hi if I leave sock pipe kook up and cut the tip off what sides is the pipe

Hot damn hell yeah!

@FrostbiteRam

5 жыл бұрын

🤙👊

@SGTCantu

3 жыл бұрын

My new favorite words… hot damn!!!

This restored my faith in how smart humanity is, looks amazing and looks factory

@FrostbiteRam

5 жыл бұрын

Thanks man, much appreciated 👊

@juliozuniga9251

3 жыл бұрын

@@FrostbiteRam whats the link for those tips bro sounds dope

@FrostbiteRam

3 жыл бұрын

@@juliozuniga9251 I got them from summit racing

@juliozuniga9251

3 жыл бұрын

@@FrostbiteRam do u have the link by any chance thanks btw

Looks and sounds mean boss

@FrostbiteRam

5 жыл бұрын

Thanks I definitely love the idle

What kind of rims are on the white one those look nice just got a flowmaster on mine might get those 5” tips eventually

Oh my god!!! That sounds so sick...

@FrostbiteRam

5 жыл бұрын

Its definitely loud 🤙🤯

@Diesel_MMA

5 жыл бұрын

@@FrostbiteRam definitely sounds like it.. Definitely can hear that chop...

@FrostbiteRam

5 жыл бұрын

@@Diesel_MMA for sure

Was about to say truck on lift with those skinny tires looks silly to me, then ohh its a race truck. Gotcha nice

Do you have a list of what you used so far I have 3” inlet to 5” outlet exhaust tip 3”inch to 2.5” pipe connector what esle I’m missing

Wow

👌🏼

Will this work on the new 2019 Ram?

Can you send me the link to those tips?

Sounds beautiful. Im curious how much the 5" contributes. Mine is straight piped with the stock black tips. It sounds absolutely perfect, sets off my wife's car alarm. By deleting the muffler and the resonators, I do feel like I lost a little low end power, but the sound is perfect. Wondering if I run a full system to deal with back pressing and regain that low end power, can I still get the sound im looking for if I go 5" on the tips? Perhaps long 5" tips. I had a crusty old muffler shop guy tell me they act like megaphones and do make a difference

@FrostbiteRam

3 жыл бұрын

The 5" i think makes the most difference at idle.

I don't mean to bug you but I have to ask you if the tips you are putting on your white truck in the video are those 5" or bigger cause he looked lot better than the ones I have a my truck

@FrostbiteRam

2 жыл бұрын

They are 5"

You need to true duel it. It would let each side talk individually. Would would WAY better.

Sounds ridiculous! How are you launching a 2wd modified R/T with OEM rear control arms? Does it still have the factory limited slip carrier or did you upgrade to a locker? Maybe the RCSBs have a firmer bushing in the LCA to minimize wheel hop..

@FrostbiteRam

5 жыл бұрын

Everything in the rear is all factory except for the bell Tech 4" drop Springs that I cut 2 coils off. I have very little will hop but I will be upgrading the control arm soon. Are usually only get will hop when I start to do a burnout.

Plz don’t change that sounds nasty best I’ve heard

@FrostbiteRam

5 жыл бұрын

Its definitely loud but I love the idle now

Does a bigger exhaust tip make it louder? My pops said they’re just for looks

@FrostbiteRam

3 жыл бұрын

It will make slightly louder but mostly looks

18:00 is what you came for

Im about to swap out mine with a flow master outlaw series exhaust system -817633. My question is, do I need these exhaust pipes with what I want now? Or can I do it later with time?

@FrostbiteRam

2 жыл бұрын

You can always do it later

Anyone got a link to these?

U got just camm? Or heads as well?

@FrostbiteRam

5 жыл бұрын

Greene cam

Is the cat still on,an can I delete the cat an put long tube headers on,I was told that I should not delete the cat!!!!Sounds Killer bro,I bought a 2012 two door short bed,got super 10 Flow masters turned down behind the cab,it's not as loud as I want tho...

@FrostbiteRam

4 жыл бұрын

My cats are deleted and I'm running long tube headers.

@midnightrider5937

4 жыл бұрын

@@FrostbiteRam did it take a special tune

@DOC6.7

4 жыл бұрын

Ditch the muffler! I did on my 5th gen and sounds sick!

@DOC6.7

4 жыл бұрын

midnight rider forgot to say go to a muffler shop instead of buying a $170-200 kit. I had a muffler shop do mine in 30 minutes cut, new pipe cut and bent then welding. All for $65 ! He even adjusted my tips better then the factory had it. Also he thought I had a 4th gen where it has a Y pipe. 5th gens don’t Y at the muffler. Other wise I would have paid $110. Even cheaper if you can do it your self. I don’t have a welder.

What are the chains on the differential for? thx!

@FrostbiteRam

4 жыл бұрын

Not on anymore but was holding the rear end from sagging all the way down when lifting the truck off the ground and letting my rear springs fall out the pockets because I didn't have drop shocks on at the time🤣🤣worked great but now it has lowering shocks so not needed any more.

Do some revs

@FrostbiteRam

5 жыл бұрын

I'll get some flybys 🤙

So do I gotta buy 2 sleeves and the pipe right where do I buy this at

@FrostbiteRam

2 жыл бұрын

I got the adapters from my local autozone

What brand are the 5” exhaust tips

@FrostbiteRam

2 жыл бұрын

Summit racing brand

How do you pass emissions with the long tubes?

@FrostbiteRam

4 жыл бұрын

No emissions Here

What size is the factory when I take my tape measure it shows me that it's 5"

@FrostbiteRam

2 жыл бұрын

I believe 3" someone may have replaced already.

I live in Michigan are you local

@FrostbiteRam

2 жыл бұрын

I'm in ga

What did u say you were gonna put behind the tips?

@FrostbiteRam

4 жыл бұрын

I'm running DynoMax race Bullets in front of the 5"tips

@andrewbuonti1190

4 жыл бұрын

Frostbite Ram oh so is it a muffler or resonator

@FrostbiteRam

4 жыл бұрын

@@andrewbuonti1190 it's a muffler/resonator glasspack

@andrewbuonti1190

4 жыл бұрын

Frostbite Ram ah I see I’m trying to get my dad to buy a hemi they sound so good straight piped but my neighbors will hate us lol

What size is the factory exhaust tip

@FrostbiteRam

2 жыл бұрын

I think 3"

What cam is on the truck

@FrostbiteRam

4 жыл бұрын

greene racing .5 high lift

Where did you get the pipe adaptor?

@FrostbiteRam

3 жыл бұрын

Autozone

@hemiman.2333

3 жыл бұрын

@@FrostbiteRam thanks bro...

18:11

They should of just made the exhaust tips the factory length

@FrostbiteRam

4 жыл бұрын

Agreed

What size is the inlet

@FrostbiteRam

2 жыл бұрын

2.5

Does this have cats?

@FrostbiteRam

2 жыл бұрын

No

Why are you tacking instead of welding from one tack to the other

@FrostbiteRam

4 жыл бұрын

Lol never claimed to be pro welder but my stuff holds👍

Too much work though.

Lol. Wears helmet when welding but no hearing protection when using the cutting wheel. R.I.P your eardrums.