Tip for zenithal, use the technique with the primers or undercoats. Black spraying upwards, gray straight on, and white from above. Then give it color coat.

@BabaLoochi

Жыл бұрын

Have no idea what the fuck that means.

@evoikon

Жыл бұрын

@@BabaLoochi Uncle explained at 3:16

@evoke2104

Жыл бұрын

@@BabaLoochi 🤣😂😅😆

Use as a guideline for shadows - that's brilliant.

Glad you like that Azael bust enough to print it twice 🖤🤘Thanks for sharing us with your badass channel audience!

stone spray paints are SO SO GOOD

@SaarNatanzon

3 жыл бұрын

i knowww right going to print this now!!

Quick look at a Resin Accident I had while making this video in my dads house 🤦‍♂️🤦‍♂️ guess who’s not getting a Xmas card this year 🤣😂 vm.tiktok.com/ZMdqBkmLR/ Patina Painting Kit ➜ amzn.to/3ei6JCe Rust Painting Kit ➜ amzn.to/2UMfvBC

@Kakuren

3 жыл бұрын

Mistakes were made...

As usual a great and simple video showing some really easy ways for anyone to make their prints look awesome!

Thank you for the tips on paints Jessy. This was very informational. I am new in the printing community and have been loving your videos. You present information in a fun and easy to follow manner. Keep up the great work and look forward to more videos! Thanks

Saying hi from sunny hot hot hot Florida!

Awesome selection of tricks to make cool things even cooler! And I imagine they could be used to non-3d-printed props and projects as well! Thanks for sharing!

@UncleJessy

3 жыл бұрын

Yeah works for just about anything you need to paint but don’t want to spend a lot of time and effort on it

The results from the Zenithal technique look great! I will definitely need to try this!

@UncleJessy

3 жыл бұрын

Yeah and so dang easy to do and just leaving it at that looks great. Such a simple option

@facenameple4604

3 жыл бұрын

As a mini-painter, Zenithal is supposed to be Black Base, Grey from 45 degrees and above, and white from straight about, to great hard lights, hard shadows, and soft shadows.

Great recommendations Jessy. I hope you have a wonderful time with family.

I've never painted a print but I know it's time to learn. This was a great intro. I guess I thought you had to be an airbrush artist to get these effects, so it looks like magic to me.

I have to say. Im not a big print finishing guy but damn you make it look so easy. This may be the inspiration I need to go a little deeper now that Im getting into resin prints too! Great vid dude.

@UncleJessy

3 жыл бұрын

Easy easy easy. Ain’t no body got time to do an 8 hour paint job

I have been thinking about this for a while and thought it would be a lot harder. I'll definitely be using some of the metal techniques. Can't wait to get some displays done.

Wow! Those metal effect kits are 👌

I loved the result of rub and buff and the metal effects. Anything that resembles metal just raises the production value of plastic.

I like the ease of these methods, i got introduced into 3D printing from painting table top miniatures, a lot more time consuming painting prints that way but also worth it

Love your videos Uncle Jessy. Hard to enjoy as much after buying a Mars 2 based on your recommendation and it being a total lemon. But still thanks for all the great content

This might be my favorite video from you man. Love it!

@UncleJessy

3 жыл бұрын

Oh wow. Really appreciate it!

❤ thank you for the tips cannot wait to try it out! I’m in to ttrpg and laking mini’s so this will help take them to the next level! 😊

2:37 ohh wow that black model looks gnarly, love it

Didn't have any idea these effects came out of the box. Thanks for the tip! Subscribed!

Great effects Jessy! I am loving that patina!

So Cool! Great meeting you the other day! Keep up the awesome work! Montana Gold (the purple you used) is AWESOME paint. Well worth the price! The stone came out so nice!

@UncleJessy

3 жыл бұрын

Thanks again for saying hi!

If you're 3D printing a Green Lantern figure, you could always do the shadow technique from the direction of the ring and the Lantern to give an actual glowing effect. Would make them look AMAZING.

Great location,great tips. Thank you!

The rub 'n buff and metal effects were really cool!

@UncleJessy

3 жыл бұрын

So dang simple as well

This video is so helpful! And I just love Zane Rogers! Can’t wait to try those metal effects, f didn’t know they existed

Your videos are always so entertaining. Almost like Jazza’s. There’s attempts and trials but I realized even the videos I think should be under tutorial, they’re never quite detailed or much help. Good for entertainment purposes only.

Also, say hi to my Brother in the little cameo at the end ;)

@vaughn.reynolds

3 жыл бұрын

Was just about to guess that was your bro!

@feanor287

3 жыл бұрын

Your brother is Jaromir Jagr ? :O

thanks for the tips, I will be trying these for sure

They look amazing, I’m getting all kinds of ideas but I’m stuck at work 😭

Great ideas! Thank u.

This is so helpful. Thank you

Very cool effects!

Beautiful, thank you sir

Found this video super handy thanks!

Aw, that bronze or copper patina kit looked really good, could've used that with my last Cthulhu statue print. Thanks for the recommendation

Thanks for the video as always

thanks for the tips I am gonna to have to try these out

In the last year or so that I've been watching your vids... I have NEVER seen you finish a print!!!!

@UncleJessy

3 жыл бұрын

Hahahahaha exactly!

Amazing as always

So Dope!!!!! Also, I'm trying to live like your dad! Beautiful house man. Seriously thanks again for the tips.

@UncleJessy

3 жыл бұрын

You and me both! I’m about ready to move in and go swimming every day

Just wanted to chime in.. for spraying, Montana colors spray paint (graffiti paint) sticks to literally any surface with nice deep coverage without needing a primer base, not to mention the HUGE range of colors and spray cap choices. I find that using their paint for painting really anything other than graffiti, works really well to save a little time and money.

Got my Creality Halot One this week. It's a LOT of fun now that I figured out proper leveling. Haha

Thanks for sharing, got the same noisy effect on a cheap can, went back to Duplicolor grey primer, never had an issue ever since.

Those are very cool paint sets

the one thing i got out of this, Your DAD has a Really nice house.... Thanks Jessie!!!!!

@UncleJessy

3 жыл бұрын

im about ready to move in

@bigblue1287

3 жыл бұрын

@@UncleJessy I dont blame you SOOO NICE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Enjoy your vacation!!!!!!!!

@peterchan9525

3 жыл бұрын

@@UncleJessy I think I get what you mean, please don’t give up this channel tho 🤣🤣🤣🤣

Oh damn, those metal effect paints look really awesome?!?!

I used the first trick, but used silver on black. Felt like a pro :-D And I'm amazed by the result. Thanks Uncle

Oh dat rub'n'buff technique really talks to me thanks uncle!

great video , thank you!!

Thanks mate.. Great Great video 👍👍👍

The Batman "Stone" spray paint is AWESOME for 3d scanning.

Fantastic video! Thank you!!!

@UncleJessy

3 жыл бұрын

Hope it helps!

When I was into Warhammer there is a paint that is specifically made for where shadows would land. It is a slighty transparent black. Do your final coat then run a brush around the edges.

Welcome to FLORIDA!! Great video

As always another great video!

@UncleJessy

3 жыл бұрын

Thanks a bunch!

That's it! Imma rub'n'buff my soon 3D printed interior door handle kits and then get some matte protection spray on them so I don't need to print them all over again once a month haha. Truth be told those doors are ALWAYS open and I almost never use the handles so keep calm everybody. Great video btw !!!!!!!!!!!!!

Love it!

I LOVE nerd energy and enthusiasm.

Thank you very much 🌹

I do the Zenithal starting from a black base then to light grey at a 45-degree angle then a pure white (lightly from above) with rattle cans - then few drops of Liquitex Acrylic Colored Inks in the air brush and once blasted with color it comes out vibrant and stunning and shaded to different tones of the ink color because of the three-stage zenithal. My personal favorite way of "Quick Coloring" - the metal effects for patina and rust look great though, gonna try to give that a shot next time I'm at a hobby lobby. Some new(ish) techniques I'm trying next is cheapo soft pastels from the dollar store in a coffee grinder to create "Pigment Dust" to weather prints. And while at the dollar store grab a "Kid Pack" of tiny assorted oil paint tubes - dilute with white spirit and make and oil wash that's 1000% better and easier to use than your traditional acrylic washes and in many more vibrant colors - splatter it everywhere and with a Q Tip dipped in pure white spirits just do a light cleaning on the areas you dont want it on and it come of clean without that "coffee staining" effect you get with acrylic washes. But if you still want to create tons and tons of custom colored washes check out "Black Magic Craft" on KZread (king of DIY dioramas and RPG Terrain) he has a whole video on making bulk "Black Magic Craft Wash" that's a 95%accurate clone of the washes Game's Workshop makes but with the option of making them custom colors (like the light blues/greens for a patina effect wash) by using cheap cheap cheap materials all sourced from Hobby Lobby/Michael's/Dollar Store. I'd REALLY love a collaboration video with you two since he's started to get into 3d printing of large terrain buildings and terrain scatter items (dumpsters/shipping containers/etc) for his own game boards a year or so back

@UncleJessy

3 жыл бұрын

Oh that’s a great technique! Will give that a try

This is getting me excited. I can’t wait till I’m able to get a resin printer. It’s going to be an adventure for sure

@UncleJessy

3 жыл бұрын

They are fun machines that produce great results that’s for sure!

@JadedEvol

3 жыл бұрын

@@UncleJessy i have been waiting to get into this for about 3 years. So I’m very excited to get started lol

@adrianmunoz8327

3 жыл бұрын

@@JadedEvol a great printer to start with is the Longer3D Orange 10 resin printer. It's really cheap at around $200 (less sometimes when on sale) and a bottle of resin will set you back about $20-$30 depending on the color or effect you want. It's not the best resin printer, especially considering it's an MSLA machine, but it definitely gets the job done when you take the necessary safety precautions and maximize the small build plate's potential. You can get some really good, clean prints from it for relatively cheap. It's a good bridge between not having any kind of resin printer or using an FDM machine and buying something like an Elegoo or Anycubic machine

Ayyy I saw you filming with Joe D. I've been friends (family) with his brother and him for 20 years. They got some cool stuff at the office. Can't wait to see the video of your trip

@UncleJessy

3 жыл бұрын

😬🤘hopefully up in the next day or two

The "GOLD" paint, is from the brand Montana, originally created for graffiti artists. Now with a wide array of paints and specialty finishes for a multitude of uses.

@UncleJessy

3 жыл бұрын

Was so worth the money

Thanks!

Wow model painting has really evolved for the better.

@UncleJessy

3 жыл бұрын

Some easy ones to paint that’s for sure

@voltage3d469

3 жыл бұрын

@@UncleJessy to get that patina in the old days it really took a lot of work, this is really awesome I bet the death guard guys in Warhammer are going to be all over it.

Super useful!

@UncleJessy

3 жыл бұрын

Thanks for checking it out!

Epic video I needed help with this!

@UncleJessy

3 жыл бұрын

Hope it helps!

@jackvanden5124

3 жыл бұрын

Are there any wood finish tips I’m trying to paint groot right now

That purple version of the busy looks great. If that is Montana Gold paint(?), it is really good stuff. A long time favorite of graphitos all over. Zenithal really elevates most pieces. Great video. For those more involved in printing that wasn't some good sources for painting my top 5 are: Squidmar Miniac Zumiko Midwinter 52miniatures Goobertown (great place to start) Yes, this is 6. Value added. Lol

@UncleJessy

3 жыл бұрын

Yeah thats Montana Gold and was my first time splurging on a can and was really happy with it. Oh and thanks for those recommendations! Will for sure check those out to try and up my painting game

@Ron_Ventura

3 жыл бұрын

And Marco Frisoni. “Hello Guys” he’s a gem.

genius 🔥

Thanks 👍👍👍😎

Wow I will try the rub n buff for a Sauron print I’m making 🎉

Gee, Thanks Uncle Jessy, now I need to spend MORE money on paints!!!

@UncleJessy

3 жыл бұрын

Juuuuuust a little more 😬🙃

I'm interested in what the rub and buff will look like on an fdm print. Or how much prep would be needed for them.

Super cool paint effects. Thanks! Do the patina and rust effects stay visible after applying a sealant?

The alien print with rust effect is absolutely amazing ! I need to do one for myself

@UncleJessy

3 жыл бұрын

Turned out so good

@paquilopez2055

2 жыл бұрын

@@UncleJessy ihhojhjjhjhh

on the angel one with the support bump, They just have a boil or mole on their arm to mark perfect imperfection

The batman and patina effects were stunning. Not so sure about the rust, and didn't care for the others at all.

For anyone wondering, that's Gold Montana cans, which is a premium graff brand ☺

Killer vid. Never heard of rub n buff but it's exactly what I needed for the project I'm on. Hope its ok on fdm. One day I'll get my hands on a resin printer. They seem to come out so smooth! Any recommendations on primer for fdm?

Aye welcome to Florida where the humidity is always high and messes with 3d printing

thanks!

Dry brushing!!!! Better than any of these methods. So quick and easy and brings out the details 100x better than rub and buff. You can also control it much better, emphasize details more and layer it with colors. Also, ink washes are pretty quick and easy and great for certain effects.

Here in Florida I gave up on regular primers and just use a satin paint. Less fuzzy and your following layers of paint don't end up with the bottom layer bleeding in. I did a couple Cthulhu buddhas, one with black primer, one with black satin paint, and the one with the primer dulled out later gold paint so fast as it dried and multiple layers did not help. The one with satin spray paint held it's color and adhered very well.

Use an air brush, you can change nozzles, splatter one is good for speckled fx. Spray in a spray booth, not outside as wind can mess up the spray flow. Use liquid masking.

I use 2 in 1 sandable primer and wet sand with 300 grit always come out smooth

The spray paint is Montana Gold, they (Montana) also make a bunch of other models of rattlecans depending on material etc. Even though they're called Montana, it's actually a Spanish brand.

these techniques are so freaking cool, thank you so much for sharing them :D

@UncleJessy

3 жыл бұрын

Yeah super simple and effective

Love the video! Loved the artwork in the video also in the background. Where can I buy your dad's work?

Once again a great tutorial! Can you tell us what primer to avoid, as I too live in FL & am wondering if that might be my problem when I paint helmets. BTW where in FL? I'd buy you a beer to thank you for all the help you provide:)

Your video was fantastic! How did you take the video of the printer pulling the model out of the resin tank? Can you tell me? Thank you!

Was your dad impressed with your 3D works of art? The Mars 2 pro seems to be a great printer. I was able to get the earl bird preorder for Mars 3. Definitely a very useful video some great paint effects. And another awesome video as always.

@UncleJessy

3 жыл бұрын

Yeah I have been showing him the prints and the painting results with each one I’ve been working on. He’s been really enjoying seeing how they all work

the maker of the gold spray paint is montana. gold is their low pressure line. black is the high pressure. top spray paint.

The black primer with silver rub and buff looks amazing what is your favorite black primer?

this has been brilliant and helping me to paint my 3d printed figures to sell, as they are not selling in the grey. The gold brand spray paint what is the equivalent in the UK?

Your angel wings would have been a great target for a dry brush.

VVVVery cool

Amazing resin printer I need your opinion I will buy the Ender-3 V3 KE or elego resin printer?