"This universal socket is terrible" "Oh, its working"

@gregcurcubeu6068

4 жыл бұрын

EJ Ryan im buying one

@rawux1228

4 жыл бұрын

They are good were not much force needed, I used it on very tight bolt and pins inside twisted and got stuck. Also userful for unusual shaped bolts

@charlymanson6861

4 жыл бұрын

yeah i got one and i used it with an impact driver and it just broke everything inside lol

@JayMac

4 жыл бұрын

Mine has worked fine for a decade lol

@forrestmaners6962

4 жыл бұрын

Why does this dude have a problem with all these tools

5 Tools I Assumed Were AMAZINGLY Bad Until I Actually Tried USING Them

@bobbysmith7101

5 жыл бұрын

Blood Bath and Beyond - Pop Goes Metal Covers this man made a fool of himself

@elmzsni

5 жыл бұрын

lmfao, way more accurate title to the video... this guys a douche

@pws3rd170

5 жыл бұрын

he did admit to his mistakes but just because it works doesn't mean it cant be horrible. He still pointed out at least one inherent flaw with each item

@chadmcinnis483

5 жыл бұрын

Yeah

@johndenicola6173

3 жыл бұрын

@@pws3rd170 Yeah, but his points were ** VERY ** far reaching at best, much like those "made for TV" products where they show some incompetent person trying unsuccessfully to flip an egg or cut a tomato.

I'm never had or gonna have a hedge - these things never work for me. That's because they are hedge clippers...

@lbrown21494

3 жыл бұрын

Lopping shears are different if I'm not mistaken

@alanj7306

3 жыл бұрын

Loppers are entirely different. Have them and hedge trimmers on my outside table as I type, they both have their use and both work great.

@ewarwoowar9938

3 жыл бұрын

I know I'm late to this but yep, they're not designed to be used for what he's describing; they're hedge shears. What his wife wants are loppers, a totally different thing. And there's different types of loppers too (bypass or anvil) depending on what exactly you're cutting. And if your anvil loppers won't cut through it...well that's what saws are for. It's a bit like complaing that your screwdriver is rubbish at banging nails into planks of wood. Of course it is...that's not what it's for.

@WestinsChannel

3 жыл бұрын

"I've tried cutting down the oak tree branches countless times with these hedge trimmers, and they never work. Terrible tool."

"Sharpening" steels are used to KEEP sharp knives sharp. They were never meant to work on a dull knife. Stud finders work fine. Hedge trimmers are for trimming hedges, and thin stuff like vines. They are not Pruning shears.

@johnratfink7343

3 жыл бұрын

I use hedge trimmers literally every week at least once. Whether it is gas powered for.when I don't care about accuracy and appearance as much, or by hand where they are more accurate and quiet. Some accounts do not want to use electric or.gas tools.on certain sensative flowering hedges. So I use hand trimmers instead

@motoarch

3 жыл бұрын

This guys a joke.

@somefrozendude3475

3 жыл бұрын

The steel also helps with rolled edges

@123siccmade

2 жыл бұрын

Yea 100% true

@CallMeUbba

Жыл бұрын

Yeah this guy knows a good amount about certain specific tools but his general tool knowledge is extremely disappointing to put it nicely

A steel isn't for sharpening. It's for honing. Maintaining an edge

@bdodger8

4 жыл бұрын

I was about to comment on this, but your's is sufficient.

@teskyer

4 жыл бұрын

Agree..... brings back the edge nicely

@snip549

4 жыл бұрын

It knocks the wire edge off

@Kadranos

4 жыл бұрын

Exactly. You use it each time you're using the knife so it never stops cutting tomatoes. So really it's about training your wife to use it the right way whenever she pulls out a knife.

@jaredtandle2596

4 жыл бұрын

Yeah same, was gonna say this. It just realigns the blade. If it's dull it's dull. If it has nicks in it it'll probably help but it kinda is a lost cause at that point. You can either sharpen the blade down to the nick in it or just get a new one. Ramsey uses it basically every time he grabs a knife

"5 AMAZINGLY decent tools that I have no idea how to use"

@contytub

4 жыл бұрын

the only thing i would not trust much is the universal socket as it may damage bolts and nuts if abused because the way it grips the surface rest of them are more than decent if needed and used as supposed

@tommiegel5172

4 жыл бұрын

Especially the sharpening steel

@sebastianlaplume461

4 жыл бұрын

Yeah, he just gave a lot of opinions

@BandanaDrummer95

4 жыл бұрын

@@tommiegel5172 A sharpening steel is the most useful tool in my knife block. Granted, I looked up how to sharpen a knife (it was demonstrated with stones, but the important parts remain the same) well before I attempted using one.

@DarkZeroNemesis1

4 жыл бұрын

MATE your just as useless as those tools

Makes fun of stud finders and people using them to find studs in walls. Uses bent copper rods to locate water and power underground using magic

@blind8686

4 жыл бұрын

Ben Duffy exactly

@blakeok952

4 жыл бұрын

Lol

@HomelessSoldierMan

4 жыл бұрын

Electric studfinders always seem to work for me

@kukkuud2105

4 жыл бұрын

The rods seem to always work in my family

@garnerday7149

4 жыл бұрын

@@kukkuud2105 it's easy to believe something that's not true

"FOUR USEFUL TOOLS YOU SHOULD HAVE AROUND YOUR HOUSE PLUS I MAKE FUN OF A 50 YEAR OLD LAMP I STOLE FROM A HOMLESS PERSON"

That's my life summed up. Everything works when others are watching.

That's not a sharpener, it's a honer. It does nothing to sharpen your knife, instead it makes it straighter.

@leathery420

6 жыл бұрын

Thank you! Now you need to come to the meat plant I work at, and tell that to the folks on the line. They think the steels are soooo much better than the mouse traps with correct angles even though they do the same thing. So they constantly run their steels on their knives all day when not cutting, and wonder why they need to have their blades sharpened twice a day.

@grahamtotte7133

6 жыл бұрын

Good point. This is an almost universally misunderstood tool. under magnification a sharp edge will actually look like a saw blade. This straightens and aligns all the little "teeth" so it cuts more efficiently. Not for use in sharpening but for fine tuning an already sharp blade.

@silvesby

6 жыл бұрын

leathery420 haha, yeah. Best you can do is tell them what it actually does, or simply just ask them to try cutting one after being "sharpened" by the honer, and then try with one that's been sharpened through a mousetrap-type sharpener. It's quite an obvious difference from my experience.

@leathery420

6 жыл бұрын

Haha I've tried. Thing is half the people on the line have been doing it for 10-15+ years, and won't listen to a 20 something with 2-3 years, unless you show them every single day for a long time. Frankly it's not worth the headache. I wish the guy who actually sharpens the blades on the grinder would tell them, probably cut his work load in half. Oh well whats the saying? You can't fix stupid?

@leathery420

6 жыл бұрын

The company provides them. Probably would be a food safety/ security risk if you had folks bringing in random blades all day.

The like to dislike ratio is a good representation of the quality of the video

Says stud finders dont work, but believes devining rods can find waterline with pure willpower. Sure thing my man

@GotEmAll1337

3 жыл бұрын

😂 underrated comment

@daleyfun2247

3 жыл бұрын

Witching sticks work. We use them to find water lines when they can't be located. It sounds and looks ridiculous, but it's very accurate.

@kathleenrobertpogue6818

3 жыл бұрын

@@daleyfun2247 It has been scientifically disproven time and time again. They work at the same rate as guessing does, guess what? That means they don't work. lmfao

@daleyfun2247

3 жыл бұрын

@@kathleenrobertpogue6818 Believe whatever you want dude. I'm going to keep using them because It works for me so I must have magical powers.

@kathleenrobertpogue6818

3 жыл бұрын

@@daleyfun2247 you must have reading comprehension problems as well. Definition of belief is thinking something is true with no facts or evidence. By definition you have a belief and I have facts and evidence.

Knife steels aren’t for sharpening. They’re for honing. If you know how to do it well, and do it regularly, it keeps edges straight, not sharp. For the uninitiated, sharpening removes metal, and honing will true up the very tip of an edge that is prone to folding over.

@JeffroDH

6 жыл бұрын

Getting the feeling that this video was made to put ads in. Really love the content in general, and appreciate your efforts. This one was a dud.

@Landrew0

6 жыл бұрын

Knife steels have been used to maintain a sharp edge for over a century at least. Of course they're not for sharpening. How did you miss that?

@millerthedog

6 жыл бұрын

Yep honing not sharpening , good tool

@lnfotron

6 жыл бұрын

I was about to say the same thing

@jackbeets3838

6 жыл бұрын

Thanks

So paused for a second the “knife sharpener” he talks about in the video is not a knife sharpening device it basically just removes any burrs or tough edges on the blade doesn’t sharpen it it is called a honer and all it is supposed to do is remove anything from the blad that could cause a rough cut it’s not supposed to sharpen. I can’t blame him I just wanted to clarify because I just learned this at my new job

@ixt_roadandracing

4 жыл бұрын

they are really good aswell! its basic knowing what a knife honer is for

@kkpiemels3113

4 жыл бұрын

It kinda sharps. We use it at work to sharpen stanley knives (if used correctly)

@tomnorton-platford4896

4 жыл бұрын

Congrats for the new job

@jamescordinel6639

4 жыл бұрын

kilo gekapt it doesn’t sharpen the blade. It will cut better since the blade is now straight, making it feel sharper, but it doesn’t actually sharpen the edge of the blade.

@rakes5150

4 жыл бұрын

The knife steel is NOT for sharpening a blade, it is a actually a 'honing steel' which works by keeping the edge perfect on an all ready sharp blade. It isn't for sharpening but simply for 'touching' up a blade so it doesn't get dull.

I worked in a restaurant as a prep cook and the guy who trained me was an old Turkish dude who would sharpen his knifes on the back of a plate.

@RyanDB

3 жыл бұрын

Haha, I've done that before when I've been made to use house knives (Don't ask) I got some funny looks from the front of house management, I can tell you XD

This video should be called "my wife and I using the wrong tools for the job" 😂

Uhm... my stud finder works just fine. Used it dozens of times and it works every time. 🤷‍♂️

@robertwhite6384

4 жыл бұрын

I own that same stud finder in the video. It's amazing. It has an awesome laser level which is the top gray circle. Level against the wall and have a straight line across the whole wall without marking or using a yard long level. If it died today I would go out and buy the exact same one.

@bio2020

4 жыл бұрын

@@realchiknuggets Franklin Sensor stud finder. Best on the market, by far. Amazon has them for like 50 bucks.

@plasticc0381

4 жыл бұрын

@@realchiknuggets same

@michaelsinger5851

4 жыл бұрын

pacificdune I’ve never had one work lmao

@C1418OS

4 жыл бұрын

@ricky gore Yeah I quit taking him very seriously after that.

3 incredibly useful and good tools that I just don’t know how to use, and 2 others that would have been amazing 80 years ago but have been replaced

@josesepulveda634

3 жыл бұрын

And which one are they because I don't know which one are they

@lennartgimm

3 жыл бұрын

@@josesepulveda634 The knife steel for example: The idea that you use it tosharpen your knife is a misconception. Your knife will have a sharp edge. This edge can dull, break, or bend. When the edge breaks, all you can do is grind down the knife to where it becomes even again and then resharpen it. If the edge is dull you just resharpen it (for example by using a whetstone to grind away material to make the edge sharp again). But when the edge bends, you don't want to grind that away, you ideally want to bend it back, and as soon as possible so the edge doesn't bend any further during cutting. That's what this steel is for: When you slide the knife across it (in the right manner) it catches all the little bends and bends them back. Trying to sharpen a knife with it will be as successfull as trying to chop down a tree with a hammer. Doesn't mean it's bad tool, just that someone has no idea how to use it and what for.

@czenkusm

2 жыл бұрын

I’m sure he knows far more than you, random KZread commenter

@thespoon3061

Жыл бұрын

@@czenkusm maybe, but not in this video

@theneoangeles

Жыл бұрын

@@czenkusm maybe in terms of cutting wood, but as a chef (and knife maker in my spare time) i certainly know more when it comes to sharpening knifes and in fact steel is a good thing but it's not a sharpening tool it's honning tool, and it makes a realy big difference.

Socket works, he still doesn't recommend it. Thanks Rangle Star.

The knife steel is hard to learn without guidance, but if you look at even the most basic of images that explain it, it is quite easy to learn. It took met about 30 minutes to get it right. P.S. only use it for knives that already have an edge.

Our next item....a spoon.. I mean.. really.. this thing is terrible..What am I supposed to do with it.. It couldn't possibly help me eat soup....Oh wait....it works perfectly...never mind

@sonordrum1000miura

6 жыл бұрын

LoganFlix This was so damn funny I had tears running down my face. Thanks for the sharp wit!

@tonywalton1464

6 жыл бұрын

LoganFlix This numpty would be using a fork, and complaining he couldn't eat soup with it.

@souleatherzero

6 жыл бұрын

LoganFlix lol

@jeremymaendel5846

3 жыл бұрын

I hate spoons. I can never cut steaks or ribs properly with a spoon. They also don’t work for eating fries.

@topcat1399

2 жыл бұрын

Lmaooooo it's dead accurate tho

1) I've never used a Yankee Screwdriver so I can't say. 2) Stud finders do work. 3) Trubel lights are still commonly used. Most hardware stores still sell Rough Service Bulbs. 4) A knife steel is designed to straighten the edge of a blade. It does not sharpen metal. 5) Universal sockets work... Not perfectly but they do work.

@vincelestrade3758

5 жыл бұрын

Thank you for being respectful and polite in your response to the content of this video. Many of the higher-rated comments under this video are very hateful and still fail to bring an argument as put-together and smart as your's. Thank you.

@Howyoudoing70

5 жыл бұрын

Stud finders work (every once in a while)

@Xanderfied

5 жыл бұрын

The biggest problem with universal isn't with the rods breaking, its with the fact that the socket it's self is too damn big. It might fit your bolt but if the bolt is in a tight spot, or weird angle forget about it. That hulking socket won't be much help.

@fitzmorrissey

5 жыл бұрын

Yankee drivers do work.

@sickstuff7624

5 жыл бұрын

He is not saying yankee drivers don’t work. What he is saying is that if you’re working on a painted surface or some freshly sanded wood the yankee driver will most definitely end up slipping and damaging the painted/sanded surface. Then you have to do it all over again to fix the damage.

"Oh i have used a universal socket once, and now it is in the top 5 of my Amazingly Bad tools" LOL

back in the early 2000s, I built a subwoofer box using a yankee screwdriver and philips head screws. It actually worked great imo.

Wow, you sold me on that universal socket, I gotta get me one of those!

@GingeyNHF

5 жыл бұрын

jamienoel removed and reinstalled the transmission on a 89 F150 with one of those just to prove a point, worked flawlessly.

@Theamazingaprilb

5 жыл бұрын

Seeing that on the thumbnail is why I am here. I was shocked. It's a really good tool and very helpful.

@nathanspires2600

5 жыл бұрын

Doug Marshall I love mine....I leave it on my atv along with a ratchet so I don’t have to carry the individual size sockets

@mixerfistit5522

5 жыл бұрын

@@saxonone20 they definitely used to have issues with falling apart. Had one called a gator grip about 25 years ago. The main issue with them is the clearance as it can be hard to get such a large socket into tight areas. You'd probably be better off keeping to the correct fittings, I can't imagine you needing too many different sizes

@stigrabbid589

5 жыл бұрын

@@mixerfistit5522 gator grips were still available a couple years ago at walmart, i have one i bought at my local walmart but i rarely need it for anything.

This video is so much better if you read the comments at the same time!

I love the honesty!! Things dont always turn out as expected!!

The lamp is actually used very often by reptile owners

@zioulz3685

4 жыл бұрын

Can agree

@argenti3609

4 жыл бұрын

Chickens too, they are good for heat lamps

@munster355

4 жыл бұрын

Honestly anyone who wants to bring the gift of warmth without direct contact(e.g. heated blanket, which could get torn to shreds) or fire, I know a couple that has foxes that put one in their shed to keep them warm.

anyone remember the saying "A bad workman blames his tools"

@indescribableemptiness4104

4 жыл бұрын

Yeah but there are some objectively just bad

@crayzay2495

4 жыл бұрын

I always said a good Craftsman blames his tools

@kap1526

4 жыл бұрын

@@indescribableemptiness4104 comment is based on this video. Your response isnt based on this video other wise your a bad workman .

"Here is some tools i dont know how to use"

@B9scrambler

6 жыл бұрын

"Here are some tools I don't know how to use." Glad to be of service.

@zeroangelmk1

6 жыл бұрын

B9Scrambler please continue to be a savior

@harper222

6 жыл бұрын

lmao

@yamisux

6 жыл бұрын

110% true

@sebastianpuzik2533

6 жыл бұрын

SATIRE ! Lasse Pedersen, I hope you don't have such a problem in knowing what is just sarkasm irl because then you realy gonna have a hard time with people...

I remember looking up "what ratcheting screwdriver was in Breaking Bad?" when i saw that thing I thought it was so cool

In a tool sense the knife steel may not hold much value, but in a kitchen it is used to hone the blade before every use. it straitens the steel and knocks of any imperfections, it does not "sharpen" because it does not take off any material. Its function is actually very similar to that of leather strop, and in fact can actually be used as a replacement for a strop if necessary.

so from what ive seen... your yankee screw driver works... electronic stud finders work great if you find both sides of the stud and send it in the center, better than puttin wholes everywhere, tellin me you bought a cheap lamp, a knife steel is not for sharpening.... its for honing, u use it before u use the knife everytime and it keeps your edge straing.... it will not sharpen, the socket u turned around on and decide was pretty good, you hate a tool (hedge clippers) that does a great job at what it was intended for .... simply because you dont want a hedge im dissapointed

@jamesbenham2249

6 жыл бұрын

this, in a nutshell.

@ggames151

6 жыл бұрын

totally agree

@Mrdrift00

6 жыл бұрын

Did you type what I was thinking for me? Thanks

@timgargac2766

6 жыл бұрын

Yeah I hate my lawnmower too its terrible at grinding down stumps.

@charlessweet3770

6 жыл бұрын

I had to stop when he said even magnetic stud finders don't work. Who is this guy?

Good old misconceptions on the butcher's steel... lets clear some up: 1) Butcher's steels don't hone (unless they're ceramic or diamond coated) they burnish. Honing is an abrasive process, burnishing is not. 2) Most cheap butcher's steels are useless because they are either too soft (chrome plated instead of hard chrome plated) or too coarse (most professional butcher's steels have very shallow grooves that are only slightly grabby; some are even polished) or both. 3) Butcher's steels work best with blades that are not very hard, viz butcher's knives and low end to mid range kitchen knives. Using a butcher's steel on a very hard blade might cause chipping of the edge (a very hard blade might even catch on / slightly cut into the surface of a cheap butcher's steel that's too soft). 4) Butcher's steels can be used to touch up a knife that has lost its bite, but it won't bring back a completely dull edge. 5) Using a butcher's steel will work harden the edge (like bending a palerclip to and fro), so it cannot be touched up indefinitly. At some point you'll need to grind a new edge removing the stressed steel.

@cmdrsocks

6 жыл бұрын

Great points. Most modern kitchen knives (I am assuming decent quality here) have steel that is hard enough and tough enough that using a butcher's steel is a waste of time, better to properly sharpen and strop the blade. Like the Yankee screwdriver they are a thing that was once necessary, but modern materials have made them redundant for 99.99% of people.

@kaizoebara

6 жыл бұрын

I am quite fond of ceramic rods - a few swipes will bring back the bite w/o having to set up the whole sharpening kit.

@ancienttom97

6 жыл бұрын

kaizoerbara: I think you have misconceptions about the steel tool. The following link explains it well and simple. www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&cad=rja&uact=8&ved=0ahUKEwj-jrmz69_YAhVGgK0KHWVjBSUQFggyMAI&url=https%3A%2F%2Fwww.thekitchn.com%2Fdid-you-know-this-steel-doesnt-actually-sharpen-knives-211855&usg=AOvVaw29lqbh5lWYNUHBFCNpnqaw

@kaizoebara

6 жыл бұрын

I am reasonably sure of everything I wrote above - it's knowledge I gained the hard way over the course of years reading different sources and practical experience. The article you linked just assembled bits and pieces by way of copy/pasting (and not processing) what others wrote. Goes to show: a simple explanation isn't always correct.

@paulstallings1177

6 жыл бұрын

My understanding, and correct me if I'm wrong, was that a butcher's steel does not "sharpen" a blade it only re-aligns the edge. With normal use the fine razor's edge on many kitchen knives can roll over, on a microscopic level, seeming dull and the steel corrects this. But over time and/or with neglect material on the edge will ware away and no amount of honing with a steel can bring back the edge, because it's no longer there. That's when it's time to sharpen the blade via a subtractive process by grinding or using a wet stone, removing material but leaving behind a new razor's edge. That's why chefs will use the butcher's steel every time they bust out their knife, or every 10-15 minutes of use if using the knife for an extended period of time.

7:22 "no one knows how to use them" Me: laughs in brazilian. Everyone and their grandma has one of those since it's so common for brazilians to grill, and our knifes go dull and EVERYONE in brazil knows how to use those

Those long sheers arnt really used for thicker , more woodsy branches it's more for lots of small sprigs off a bush or small tree, I use them alot on bushes to get the shape right

You don't "sharpen" a knife with a knife steel. You uncurl the edge. Has always worked for me. I mean, it only works to some extent. If the knife is dull it's dull but if you just sharpened it and hit the cutting board a few times and it got dull(er) you flick out the knife steel and have a few go arounds and you can cut tomatoes again :)

@Howtard

6 жыл бұрын

Just so you know, you should use your steel to stop that curl from ever forming. Once it curls like that a knife won't be as sharp again until the edge has been ground away (which is job better left to stones and grinding wheels) If you use your steel right your knives will stay very sharp. Incoming unwarranted tip: Every now and then, before or after use, carefully place the blade of your knife horizontally across the back of a fingernail and drag your nail perpendicular to the direction of the blade in both directions; If you feel the edge catch or drag in one direction more than the other then that means that side is beginning to curl and you should use your steel on that side.

@asancoon2363

6 жыл бұрын

Also don't use knife steels on hardened steel blades because it will damage your blade. You'll wanna look into ceramic honing rods for hardened steel blades

@TheRealFaceyNeck

6 жыл бұрын

I was under the impression that all steel knives are made out of hardened steel, otherwise they would lose their edge quickly.

@asancoon2363

6 жыл бұрын

Facey Neck most knives are cut out of a stainless steel blank, which is hard but they arent quenched and tempered - which is done to forged blades and makes them much harder. Forging is long and complicated so the only bades you would find that are hardened are hand-made ones or the more expensive knives. One way to check is to use a metal working file to try and scratch it. If it doesn't catch on the metal, slides without much resistance and doesn't leave a scratch mark then it is hardened steel

@CaptianHicterDeckmen

6 жыл бұрын

im so glad i came into this thread i have one of these and a few ok knives and im SO glad i came here as i knew some of this but all of it

as an electrician i have a stud finder and it works wonders....

@billp4

6 жыл бұрын

mine does too

@bfure1

6 жыл бұрын

As an abbatoir worker I know for a fact that the steel he was showing works. The only issue is that it isn't for sharpening. Shows how little he knows about the tools if he gets that basic information wrong.

@thewolfin

6 жыл бұрын

I have a stud finder built in, it's called my knuckle and ears

@emanueladamache7034

6 жыл бұрын

haha yeah while i use the stud finder, my dad is there knocking on the walls making the clients check their doors hahaha

@johnrice1943

6 жыл бұрын

My dad isn't a butcher, but he uses a rod sharpener for his knives to butcher deer. It works fine if you know how to use it.

Universal stud finder: Lay a flashlight beam across the wall, the slightly different heights at the screw heads will stand out clear as day.

Wrangler star: reviewing tools he’s had for probably 10 years+

The "HONING" steel would work just fine if you used it properly. its not meant to sharpen your knives its meant to realign the edge of your blade. if you use them every time you use your knife as well as wash, dry, and store your knife properly it will last a long time before it needs sharpening. A job that is meant for a wet stone.

@timothymorrison1235

6 жыл бұрын

That,s true. I have two steels, a coarse and a fine. The coarse WILL sharpen without losing much metal, then the fine hones it to a razor edge. It's all in the angle. NOBODY touches my knives with a sharpener. I hate those Eversharp knives. I only use a wetstone if I buy a knife someone has really messed up, or for axes/hatchets, machetes.

@kenopsiamusic

6 жыл бұрын

i still have yet to buy a wet stone. thankfully i havent had to sharpen my knife yet but when its due i'll probably send it off.

@gaspererjavec7108

6 жыл бұрын

buy a wet stone, sharpening your knifes is almost meditative and you respect the edge even more :)

@garettbutton6535

6 жыл бұрын

+Gasper Erjavec I agree with you, I sharpen my knife when I'm a bit frustrated at work and I have a little free time, it centers me and I always get my knife to be razor sharp. I actually have a bald spot on my left arm because I use it as a test to see if my knife is sharp enough. If I can put no pressure on the knife and it glides right through the hairs, it's sharp enough.

@FoxMacLeod2501

6 жыл бұрын

It's spelled "whetstone."

The steel rod isn't meant for sharpening a knife, it's meant for honing it (taking the burrs off after sharpening). You're using it wrong, that's why it doesn't work.

@DiThi

6 жыл бұрын

Came to say this. Using the steel rod periodically keeps the knife sharp for a longer time.

@JackDesert

6 жыл бұрын

And it's used to straighten out your blade for more even cuts. That's why you see them put it flat on the blade after a number of cuts because after a while your thin blade starts to warp.

@robmckennie4203

6 жыл бұрын

I think technically not honing, I would say burnishing, but that's not the point, a knife steel doesn't sharpen a knife, period.

You've convinced me! I'm getting a Yankee screwdriver and a Grizzly universal socket

The “sharpening steel” is actually a honing steel. It doesn’t particularly sharpen your knife. It realigns the edge, bring it to the center. Keeping a sharp knife sharp for a long time. I use it everytime I use my blade and I have only had to sharpen my knife once. I’ve had it for two years

So, uhm, your friend is in the knife maintenance business and his first move is to tell his customers to throw away their in-house knife maintenance tools. What could have motivated this advice?

@snickelman

5 жыл бұрын

Spot on, my dude.

@brettonjohansen1619

5 жыл бұрын

@jay Moham lol

@MrPaddy1000111

5 жыл бұрын

To be fair those things are useless. They don't give the edge a proper angle and if you go in and sharpen a companies knives to say 17 degrees each side then a week later the chef has ruined that 17 degree angle with the steel and instead of just touching up each blade you have to regrind the angle. Gives the guy more work, the knives less of a lifespan and is a waste of the chefs time... Overall, a pretty good reason to chuck-em

@AstoundingAmelia

5 жыл бұрын

@@MrPaddy1000111 it depends on the knife and the intent, I find them really good for tools like axes that can get chewed up, they're meant for a quick job, the reason people say they suck is they over use, it's meant for being used only a few times per sharpen if you're cutting bones and you Nick the blade for example

@Borals

5 жыл бұрын

Patric they’re for a quick touch up not to sharpen it from dull. As a chef I use them every day, never have I dulled my 1000$ knifes with them.

99% operator error.......

@codyvincent5323

6 жыл бұрын

BigOxxTech I agree

@drownsinkoolaid4203

6 жыл бұрын

BigOxxTech As us who help others with computers would say, it's a PEBCAK problem :P Different scenarios, but same problem.

@sinisterthoughts2896

5 жыл бұрын

@@drownsinkoolaid4203 unfamiliar with the phrase. I just call it user error.

@drownsinkoolaid4203

5 жыл бұрын

@@sinisterthoughts2896 Problem Exists Between Chair and Keyboard Just an in joke way of saying user error lol

@kukri1877

4 жыл бұрын

@@drownsinkoolaid4203 ID10T error :)

Concerning the universal socket: it's obviously never going to be the best tool for the job, but I've found that it is so versatile that it is absolutely worth having as it will fit almost everything you put it on. Getting it perfectly centered is pretty difficult, but if you're careful it'll work sufficiently enough to get the job done.

"They've got the built in clamp right. The clamp, clamps onto things, and then you clamp it onto something" 👌🤣

There are actually six tools featured in this video and only one of them is amazingly bad.

@richardsinger01

5 жыл бұрын

How droll.

@plusultrafox5647

4 жыл бұрын

😂😂😂

@taipoio1

4 жыл бұрын

Out of the 6 tools only one is bad and useless 😂

@eerice704

4 жыл бұрын

Boss Feddy emojis are so cringe

@short7440

4 жыл бұрын

@@eerice704 People who use emojis are so extra 😂😂😂

Here's my grungy antique light from the 60's that I f'ed up at some point......I hate it!

You need to be at least 10% smarter than the tool that you are using. This guy isn't there.

"I have 5 tools I have no idea how to use, let's make a video and prove I dont know anything" Fyi. I own or have used all of these. Stud finders work EVERY time if you know how. Yank screwdriver is a great tool if you can get a Robertson bit. Which i do. Work lights have always been dodgy and prone to wearing out. But they are cheap. When I was framing we would hang them and use them on a job and just junk them when we were done. Buy new on the next job. The clippers need to be cleaned and cared for with each use and will never let you down if you use them on what you're supposed to use them on. Every tool on this list is great if you use it properly and with skill.

I salute you in your bravery to post this. Most of those tools, you've used wrong.

@gmonk7024

5 жыл бұрын

This is one of the laziest, useless post I have seen here. Care to narrow the field on just which tools you speak of? Who you might be speaking to? Restate this or demonstrate some need or relevance for posting what you mention? You could be speaking of many things and then you don't even bother to offer some suggestion of change? These type of comments, the ones that lead nowhere and are just a child-like expressions are best left unposted. JMO

@thatjumpguy5890

5 жыл бұрын

Please reply to G Monk. I would like to know, too.

@johncornwell1026

5 жыл бұрын

"I watched your attempt to share your knowledge, and your hopes of helping other people. I think what you said is wrong, and I'm unafraid to be patronizing when telling you that. I'm also unafraid to use this comments section to say I know more than you, without sharing any knowledge or helping other people. It may be mysterious to you why I would use this space to work out my personal issues rather than using a therapist. I like mystery."

@ArtietheArchon

5 жыл бұрын

I salute you in your comment, as you not only have enough bravery to have a tool channel of your own but you also seem to have deeply triggered several people in posting it

@richkerr93

5 жыл бұрын

After working as a Master Mechanic for 9 years, IMHO, I know this guy doesn't really know too much. BTW: I too have one of those Cheap Lamps, I've had one for many years and mine still works. Oh yeah, don't use any Incandescent bulbs, they cause fires! Use LED bulbs, they don't really break unless you try to. The LED's are low voltage, in a Plastic globe, very safe.

Thats a knife honing rod. Its meant to bring the edge of the blade back into alignment and straighten it out. Unless the blade is properly sharpened on a stone, a honing rod isnt going to help much.

@YouKnowMeDuh

5 жыл бұрын

Rachel Magowan Aha! Just saw a video on what you mentioned. Thanks for the tip!

@christurnblom4825

5 жыл бұрын

Wether he is familiar with proper use of not, my knowledge of metallurgy tells me that too many of these are made of inferior metals for the task. I've owned three of them that I could cut into with the knives they came with. If they are designing them expecting you to move the edge of the blade without removing metal then they've designed them to be virtually useless. How many times can you expect to do that without breaking that edge off? 1? ...2 maybe? I don't know if that's what you mean when you say "bring the edge of the blade back into alignment and straighten it out" but your words lead me to that conclusion. I have seen one or two of these that cut through the metal of the knife and they were very useful to have in the kitchen. Of course, this guy keeps one in his tool box so ...go figure.

@russelltom2087

5 жыл бұрын

When a knife is sharpened with a stone, it leaves what is referred to as a "wire edge". The purpose of the steel is to remove this wire edge, also known as honing. It does not require much effort or especially hard steel.

@christurnblom4825

5 жыл бұрын

Interesting. I'll have to look into it more closely. Thanx for the insight.

@AnnaReed42

5 жыл бұрын

A honing steel is not meant for removing metal, just for moving it into place.

So we have; -a screwdriver you're using wrong -a perfectly functional stud finder -a lamp that no one has used since 1995 -a knife steel that you are also using wrong -a universal socket which, in your testing, also worked fine

@senatorsmiles

4 жыл бұрын

-a lamp that no one has used since 1995 What? They're often sold as heat lamps. They're crazy common and very useful. I've got several I use with my chickens.

@anracc5302

4 жыл бұрын

@@senatorsmiles thats a good point, thinking about it i actually have one on right now. Ive never seen them used as work lamps though, thats all rugged LEDs these days.

This is the strongest dad humor I have ever witnessed. The best satire on youtube

If you’re using a honing steel to sharpen a knife then I assume you’re using chisels to open paint tins also.

@bryanwoods6268

5 жыл бұрын

jello77 ha ha ha!

@toddcoles6290

5 жыл бұрын

i sharpen my knife with a honing steel so its sharp enough to open my paint tins

@jescocom1

5 жыл бұрын

todd coles Its not for sharpening or honing. It's for stropping. Before a sharp blade dulls, the fine edge curls over. You are supposed to twist the steel slightly while pulling the blade toward you at a slight angle and pulling the blade away from the steel. This removes the curled edge and helps keep the blade sharp. You can do the same thing with a leather strop like the Barbers used to do with a straight razor. Unfortunately the art of sharpening a knife has gone away with hard stainless steel that takes a diamond wheel to cut it. Now days, I just buy me a good Gerber and get a new one every 10 or 15 years when it gets dull.

@LilOleTinyMe

5 жыл бұрын

Josh Bull "so it's sharp enough to open my paint tins." Do you have Any reason to take his comment seriously after reading that?

@lamplighter1968

5 жыл бұрын

Todd didn't mean he uses the knife to pry off the lid, he means his knife is so sharp he can cut the top off the paint tin ;-)

Video should be called 5 tools i don't know how to use

@dannytheman2217

6 жыл бұрын

no he's right, for the most part. the stud finders are garbage, the hedgers are garbage. the socket demonstration made me want to buy a universal socket though lol

@ChrisChronos

6 жыл бұрын

You're so proficient with a knife steel that you spell it "steal" lol

@rg2045

6 жыл бұрын

I can tell you're great with grammar, too. Just look at the way you spell "steel". It's a simple word.

@Karl-Benny

6 жыл бұрын

never had a problem they work fine if you adjust them

@cwatson42785

6 жыл бұрын

Danny Aldana Stud finders are garbage? Never in my job have I used it and not had it find the studs. I think it's just you people don't use it properly and use it to hand pictures and don't know the distance between studs and their thickness.

I have never been let down by my stud finder I've used since 2014, and those universal sockets aren't recommended but as somebody who works on their own cars often I have to admit that it has saved me over a dozen times. These are items you have to spend quality money on to get quality results. Your other three items are from 80's, of course time shave changed. Also the loppers work very well if you use them for their specified purposes.

@ironmanmachine

Жыл бұрын

I would never use a universal socket on my cars. There are zero situations where they would "save" me. But then, I'm doing actual work, not just changing the oil.

Bless you my friend I’ve tried finder after finder (and I live in Florida so it’s hard mode anyway because all the hurricane stuff gives false positives) but I’ve never been able to get them to work consistent. Always thought it was just me.

Five amazing tools I personally own AND can actually use correctly. There's much truth in the old saying 'A poo(r) workman always blames his tools.'

@fridofridolin

6 жыл бұрын

Alan Reynolds Exactly!!!! I sat and cringed the whole time... He shouldn't even have uploaded that video. Hope he's learned to use his tools better now.

@bustosricky

6 жыл бұрын

Exactly, I have used all these tools and never had an issue with any of these.

@psycopper1

6 жыл бұрын

all works for me too

@john-michaelfranco4694

6 жыл бұрын

Alan Reynolds if you're using a universal socket, you must not use it often. These are the worst tools maybe ever. You need specific sockets made of solid metal, not something cheap like that.

@leninalopez2912

6 жыл бұрын

Couldn't agree more. This guy is a total hack... and his 'homesteading', 'rediscovery of the american dream', and 'rugged life', is pretty much the result of availability of 1) time, 2) money. Every single video is STRICTLY dependent on VERY industrial, VERY precissely manufactured, VERY mass produced tools... and when not, and the guy even gives a try at anything more-or-less rugged, he shows what a n00b he is at it, when not plain and simply absolutelly (even dangerously) downright incompetent.

Fifty years ago, my uncle was a wiz with a Yankee screw driver. It was amazing to watch.

I always thought that the stud finder was only for making terrible dad jokes?

The Yankee Screwdriver is probably my most favourite tool to keep in a car! Never actually used it as a screwdriver, my dad had the great idea of modifying a drill bit to make it a hand-powered drill! :-) I've done quite a few ziptie jobs on cars with it, and a few other odd times that it was the only drill available. My car was broken into and my original one was stolen, but was lucky enough to find 2 that were even nicer at an antique shop which was great.

I believe the old saying "A bad workman always blames his tools" has never been more apt. I only counted one useless tool in the video, and it was wearing a tanktop (actually, I'll take that back - a tool is useful...)

@bigz4349

3 жыл бұрын

I don't see any tanktops in the video you old pinecone

@nicklasveva

3 жыл бұрын

Yes, because there are no chipped screwdrivers, no broken electrical tools, no bits that just snap in half, no knives that are basically a useless piece of steel. There are bad tools, there are broken tools and there are good tools. And this guy seems to be pretty handy if you watch any of his other videos. So I must disrespectfully disagree with you.

@UncleAbs

3 жыл бұрын

@@nicklasveva - this is true, but a good workman would replace damaged tools.

@nicklasveva

3 жыл бұрын

@@UncleAbs a workman can't always afford new tools or maybe borrows. But I think that the coolest workmen have their own tools that are always in good condition. No contest there. I love keeping my tools clean and sharp.

The knife steel is actually not that bad you just have to learn to use it properly

@matthewalbright8951

3 жыл бұрын

I’ll stick with my sharping block

@tobiasolsen8521

3 жыл бұрын

@@matthewalbright8951 the steel is for honing, not sharpening

@platibyte

3 жыл бұрын

You have to make it a habbit to use it before using the knife. Sometimes i also draw the knife over my walnut cutting board a few times and it gets scary sharp from that.

I respect that he doesn’t edit his videos when they go wrong, he’s super genuine

I get that most of the issues he has is lack of a particular skill with the tools but Cody said at the beginning that it’s his opinion and for a person with the skill set he has they are terrible. Just as somebody who isn’t skilled in chopping might think it’s stupid to have an axe when you have a chainsaw.

@Colhogan06

2 жыл бұрын

You are 100% correct. That being said, I honestly thing he does these videos because he knows it's going to cause people to respond. Then more and more people will view his video so they can respond. The more viewers he gets the better off he is. So in the end, he is laughing all the way to the bank. He knows exactly what he is doing. If you think about it, most of his video's are controversial in that it's what he doesn't like or what he thinks doesn't work, genius in a way. Heck I'm just as guilty as the next guy. I got sucked in.

Pretty funny that all of the tools that are "so bad" are the same ones that I have been using for years and don't work too bad for their intended purpose. Not to mention that all of the tools that he demonstrated actually worked just fine in his demonstration.

@goopyno3586

5 жыл бұрын

Dylan's Tech yeah but why not buy a drill?

I have a "stud finder". Nearly 20 years old. Works FANTASTIC! Finds the CENTER of a stud very accurately. A "steel" hone is NOT for sharpening a knife. They merely remove the microscopic "burrs" on the knife from regular use. They MUST be used frequently. A professional chef has one hanging off his/her belt constantly.

@mannys4539

6 жыл бұрын

I have one older than me my pops has used that thing for at least 30yrs! it works fine every time I use it... mark the first edge and the other edge boom your done

@markypolo55

6 жыл бұрын

Ok, Manny, you beat me! LOL. Back in the day ( before I could afford tools), I used the back end of a screwdriver to "tap" the stud. Then in order to get the "center" I would hammer in a 6 penny nail until I found the exact center ( of course I had to have spackle mud handy too). Centering a stud is a must for hanging heavy objects.

@acrosstheacross677

6 жыл бұрын

We actually hang our steels off of a magnet strip, or hook. This keeps it out of the way. But it generally is within arms reach at any one time.

@F3Y3F3

6 жыл бұрын

Yeah, I have a cheapie Stanley stud finder that's 20 years old. Works great.

Man:These tools suck Tools: hold my beer

Those hedge clippers. If you look carefully, right near the pivot point, there is a sort of "notch" in the blades. That will cut through branches up to about 1/2 inch thick. I know this, because I just used my dad's old pair to clear a load of stuff from my garden. Worked perfectly. Like all these tools, you just have to know how and where to use them.

I use a steel every day, If you can’t use a steel it’s your incompetence, I used a Yankee Driver for twenty years, still do if batteries are down,Garden shears are for fine garden work, Again if you can’t use them you don’t know how. Bear in mind that it’s a bad workman that blames his tools.

@JDeWittDIY

6 жыл бұрын

Agreed on the steel. I use it to keep my pocketknife sharp and it works just fine.

@Bill23799

6 жыл бұрын

Haha......my 8th grade Nun used to say the same thing. A poor workman blames his tools.

@SuperCidermonkey

6 жыл бұрын

I can't wait to see your videos on the correct operation of the aforementioned tools.

Exactly the kind of quality tool information I expect from a man in a sweater vest.

@brumph7256

6 жыл бұрын

RVA Nate Lmao With a jc penny plaid and some not-so-carharts.... But he got that tape measured. Lol

@danpettis1675

6 жыл бұрын

HAHAHAHA

@kingusmaximus

6 жыл бұрын

i laughed out loud for real...

@dennis8196

6 жыл бұрын

Shame the details is wrong for a number of points

@mrcokez1

6 жыл бұрын

W

That universal socket is so good, it's such a good idea which you could just improve on yourself.

Some of these things have limitations like the multisocket but good in a pinch sometimes for odd shaped fasteners. Stud finders work fine for me, if you're not using them not sure how you're locating studs. Hopes and prayers? Also handy when you're not familiar with a house and how it's constructed. Went to place a flush mount inset tp holder in someone's bathroom, only one wall next to the toilet. No matter where I placed the stud finder around the most typical mount location it kept indicating an obstruction. A rather wide one (much wider than a stud) and vertical as well. Unsure of what was in the interior wall I cut carefully into the drywall, discovered there was a heating duct right there where I didn't expect to find one. Had I just pitched it thinking 'this thing doesn't work' I'd have slammed right into the duct and cut it all to hell. Gotta be smarter than the tool sometimes.

@gregorsamsa1364

5 ай бұрын

My experience with stud finders has been similar to his. Though I admittedly haven't bothered to mess with one for probably the past decade so maybe they've gotten significantly better. I just use a magnet. Works well unless I'm dealing with an old house with plaster walls

Electronic stud finders don't work? Really? That's news to me. I install tvs on walls for a living. The stud finder I use works for wood and metal about 95% of the time. Hell, I'm starting to think that thing would find Moses and the burning bush if you asked it to.

@codypendency9482

6 жыл бұрын

Spicy Flavor Tide Pods how the hell do you use them lol

The folks at Grizzly are like, "Thanks for the free ad."

Wranglerstar - I've just come across you in the last month or two (2021). so I'm not caught up, but I dig your stuff. My wife and I are in the midst of a deep spring cleaning, and now, I know a dozen or so such things I'm gonna get shed of. Thanks for the advice, and of course, bless you and yours.

Absolutely love your videos. I am not convinced to remove my honing steel however. It is used often on the knives I don’t want super sharp, like paring knives, and does a great job HONING my nice knives. Lol’d at the universal socket part (I’ve never owned one). Love you.

A honing steel isn't for sharpening. It's for knocking the small burrs out of the knife

@Highstranger951

6 жыл бұрын

Sterling Chandler thank you. These are hones only. Like a leather strop

@kerrymurphy4068

6 жыл бұрын

came here to say the same. This video is very flawed.

@MyWaifuNow

6 жыл бұрын

hes basically saying "i dont know how to use this so its dumb"

@ElectronSpark

6 жыл бұрын

swankmosquito exactly my thoughts.

I spent a month in Puerto Rico and loved the gator universal socket. I have very limit weight limit for tools and I used it with my impact driver to repair homes after the hurricane. Of course it not a replacement for a proper set of sockets, but man, it was invaluable and when I return I will be taking it back with me.

@bobobob1230

6 жыл бұрын

Rick Thompson thank you for using your skills to help our fellow Americans! :)

@presidenthonor

6 жыл бұрын

As a puertorican, we greatly appreciated your help, take care! The hurricane for the most part was a pretty hard punch, some puertoricans are still without energy! :(

Thanks for recommending the Yankee screwdriver, and that universal socket .. Called the gator grip in my kneck of the woods

This was very funny! All of a sudden everything works well hahaha 😂 Great video, thank you.

Title should read “5 tools I’m too dumb to use”

@thegr8tganj

6 жыл бұрын

I can't upvote this enough!

@mechlife5669

6 жыл бұрын

agreed...

@JoshuaHowley

6 жыл бұрын

Agree, none of them are bad at all, when used properly!

@Yophillips3272

6 жыл бұрын

Idk those shop lights do suck. But he did 6 things didn't he??

@ethansherr3281

6 жыл бұрын

haha! agreed

As a chef, working with a knife 8 hours a day, i must say that a honing steel is invaluable. So to call it a bad and usless tool i so ignorant. Almost to the point that i lost respect for you and nearly unsubbed. But i can agree that one who do not know how to use it, may end up destroying the edge. But still its, as important as a knife. So learn how to use it, and use it after every time you cut something with your knife. It will keept the edge sharp for a long time, i re sharpen my knives only once a year!

Yankee screwdrivers are amazing for removing screws. It helps to prevent the head from stripping out cause your pushing down on it. I use it for maintaining vintage machines like mills and lathes, etc.

I love your honesty and logical views on everything I have seen of your channel. With that being said, the "Knife Steel" is not intended to sharpen a knife, but to straighten the burr of the blade that through normal use, will develop making the blade seem dull. Sadly, the newer "steel's" are of poor quality, often doing more damage than help, and in our age of disposable products, people have no proper skill in their use. It is a usable tool to extend the effective use of a knife between sharpenings. Think of it as the ceramic side of most pocket sized sharpeners... I hope this is of help to you in the future and explains the usefulness of the tool... BigBob

You know, after some of the tools worked great he could have just not posted the video, but instead he put it out there for all to see. I'm not going to fault him for that. Props for admitting when you are wrong about something; very admirable quality.

@kap1526

4 жыл бұрын

He doesn't care about being criticized he just made some money from posting this video

@jesseausling9628

4 жыл бұрын

Probably just couldn't be bothered coming up with a new video idea

@veeti4210

4 жыл бұрын

I would think he would first test it before trash talking it

@danielwalter3562

4 жыл бұрын

It's not admirable, it's absolutely lazy. He randomly picked 5 items that he "thought" were useless and decided to post a video with a catchy title...all for views. He used ONE experience he had YEARS AGO to determine that the universal socket was useless...and was made to look like a damn fool. He was acting admirably. He doesn't care about that. He only wants to post content, no matter what it's worth is, on a regular basis so he can continue to line his pockets. That's just my worthless opinion, hahahaha.

@kukri1877

4 жыл бұрын

@@danielwalter3562 Hey! he also told a story how his wife incorrectly used the hedge trimmers in the woods, so they were complete junk! (i agree with you)

The knife steel is not for sharpening it's for honing the edge

So many people downvoting this video when he's willing to admit 2 of the things in his list were actually not bad, and owning up to it and admitting he was wrong.

lol those universal sockets never work right until you try to show someone how bad they are

The Shrubbery Trimmers were designed for The Knights Who Say Ni

@jonsquatch

6 жыл бұрын

Thank goodness I wasn't the only one who thought that... Your mother was a hamster and your father smelt of elderberries

@wrigg

6 жыл бұрын

ekki-ekki-ekki-pitang-zoom-boing!

@creedbarnett4948

6 жыл бұрын

"My nane is Roger, Roger the shrubber. I build, design, and arrange shubbery."

@MrBugsier5

6 жыл бұрын

any body know where the toilets are?

Do not blame tools you do not know how to use.

@RageTurtle_Rage

6 жыл бұрын

kzread.info/dash/bejne/gZab0NRyoMaeYpM.html

@brumph7256

6 жыл бұрын

He bought them though.... lol

@patrick7247

6 жыл бұрын

B Rumph I could buy a lot of things I don’t know how to use. Don’t know how that changes anything.

@greenaum

6 жыл бұрын

I think the guy can figure out a pair of hedge clippers, and whatever else. If he's messed about with manifolds and carburettors, he probably knows his way around a tool box. How, in your opinion, was he using them wrongly?

@dylanzrim1011

6 жыл бұрын

greenaum he judged the Yankee screwdriver and it worked perfectly. The socket, he used it in the wrong application and it worked perfectly. The socket to me is a tool you use when using your fingers isn't possible to get things to fingertight. And where speed is essential. Just like 3D printing. It is another step in a big process not its own thing. On its own 3D printing is practically useless, but making an exact replica out of wax or easily melted material means you won't have to sit down and carve a wax model in order to make a mould for casting.

I love how wranglerstar is such a good hand that he can’t show how crappy these gadgets are..

Wranglerstar: "Can't imagine why someone would use hand powered loppers to prune their bushes when there's a much better tool out there" also Wranglerstar: loves to use hand axe and hand saw to cut down huge trees

I always thought the knife steel was to true the edge and not sharpen it.

@jareddumke5300

6 жыл бұрын

You are right

@Corrosion37

6 жыл бұрын

yup, but pretty much everyone doesnt know how to use them correctly so they end up rolling the edge over. makes me cringe thinking about it

@rainsoakedscott5203

6 жыл бұрын

I cook for a living a use a knife steel daily. Your right, it's to true the edge up and not to sharpen it.

@AllaroundNbackagain

6 жыл бұрын

You go er Pontiac.

@velazquezarmouries

6 жыл бұрын

Master William it is called honing rod because of that

should be named "5 AMAZING Tools I don't know how to use"

@questionssm

6 жыл бұрын

uRANiUM well this is the same dude that almost broke his wrist when trying to test drills.

@Landrew0

6 жыл бұрын

It was as if fate was trying to teach him a lesson; they actually work when you want them to (and especially when you don't want them to). Most of these tools have (or had) their place, otherwise they wouldn't have been so popular. One of the reasons our tools don't change very much over the years, is because most people don't give them a fair chance. Despite clear instructions, they usually use them wrong, and only once, then declaring, "it doesn't work," instead of giving it a fair chance.

@trabaudo

6 жыл бұрын

He is the most useless tool!

My hammer is great at driving nails but horrible at compressing air; therefore, my hammer is an amazingly bad air compressor.

This video would’ve been a lot shorter if he had actually used most of these tools before