hey... So that's what I call a real routing template! All respect!. I've seen many ideas and projects for routing template, but none came close to making as much sense as this one. The commercial milling copy offers didn't really convince me either. The useful features that have been implemented here in the routing template speak of a craft "carpenter" experience, who really thought a lot about what you really need in woodwork through his design. So that the work can be done as quickly as possible. So the device addresses all possible situations, in the carpenter area and all the more in the hobby area, Thanks for the idea... It will be implemented as soon as possible. Not in wood but in 15mm aluminum groove profile. thumbs up? Best regards

@carpentak

Жыл бұрын

Thank you very much for your nice comments. It would be better if you use an aluminum profile. ok thumbs up!

@user-ec4dn4op8d

2 ай бұрын

Это давно уже реализовано !!! Parettool называется

안녕하세요 선생님 너무 재미있는 영상 감사합니다.

Best one I’ve seen

Omg the tools you have are out of this world I would love to work in your workshop. All the best from Ireland ❤

that's what I call a MASTER PIECE all respect bro thans so much :-) congratulations from France

I think this is one of the neatest versions of this particular jig I've seen, adding the laser etched measurements is a level up and the use of quick release bicycle clamps for setting to size is genius ... another plus is these clamps are dirt cheap, I can see myself using them for other purposes 👍

This is a worthwhile project, which has been efficiently presented. I think that viewers of your videos would appreciate links to the tools that you use, but even more importantly links of where one could find/purchase the accessories that you use in your projects.

@1960antoniomachado

Жыл бұрын

I World Knowles how can i do to get this this jig interesting ad useful.

Awesome next level jig. With all the additions to a simple router, just amazing. Makes it so versatile.

This is head and shoulders above any other jig of this type I have seen on KZread. Thanks for sharing this, a stunning piece of design and engineering.

That’s a great router jig. Using the laser to create the ruler for dimensions is a great addition

ребята, это круто, руки точно растут с нужного места👍👍👍

Really like the centering jig. Sure beats trial-and-error with the fence on a router table.

Awesome.. I've seen this jig in several videos in youtube, but this one is by far the best. Kudos!

YOU ARE VERY GOOOOOOOOOD !!!!!!!!!!!!!!!!!!!!!!!!!!!!!👏👏👏👏👏

That is a GREAT jig TAK! I may have to make one of my own. Thanks for sharing 😁

What a beauty! Love the material choice, the mm scale and definitely the clamps/stops! Great ideas

Nice! I made similar festool-style template using 1570 extrusions to keep it as low-profile as possible (to have an increased cut depth), and exactly the same clamps :)

im just at wow super great jig design

Awesome!!! Thank you, Master! Bravo!

Extraordinary Sir! Thanks for sharing!

Now that is impressive! Thanks for sharing!

Beautiful bit of work

What a fantastic jig you made 👍

Очень функциональное изделие! Хороший Мастер, приятно смотреть.

Hmm, perfect job and inspirating details!! Thanks!!!

This is great! I’ve got the Woodpecker aluminum version already, but it hadn’t occurred to me to use it for precise fit dados, so thanks. Now I’m going to be looking for places where I’d like to have the track clamp slots, maybe I’ll end up making some of these anyway. Especially since they are tooless, unlike the woodpecker. Darn, now I need a laser too. 😬

Isn't it amazing how easy stuff is to do when you have talent?

Genius and creative!

Vraiment un travail fabuleux ont à envie de l'avoir dans son atelier 👍👍👍👏👏👏

Must be really nice to always have the right tool for the job.

The best router template I have seen, very precise work, thanks for sharing your ideas via video 😀

Clever as ever. Nice work! ☺️👍

Superbe réalisation, très bien réfléchie; Bravo👍

Encore une petite merveille......

Verdaderamente hermoso trabajo Gracias

Excelente trabajo, enhorabuena.

Perfect, innovativ, wonderful, nice 😀👍😀👍😀

Thanks for sharing!

Καταπληκτική δουλειά, συγχαρητήρια.

@Starman3539

Жыл бұрын

Love to see the Greek language used here!

As always, work of art ;-)

Am a fan of your work Tak, love everything you do and this project is no exception. Completely understand your not wanting to supply plans too, however I had a devil of a job trying to find/know what the clamps were called. It wasn’t until I read the comments that I discovered they were called Bicycle Saddle Quick Release Clamps. My only suggestion to improve the excellent presentations you already make would be to identify what bits and pieces you used to make a project and perhaps where you bought them. Keep up the fine work and keep those projects coming!

great achievement!

Another great build thanks for sharing I always enjoy watching your work

@carpentak

Жыл бұрын

Thank you. my friend

구독 박고 주변인들 추천하겠습니다 취목치곤 퀄리티가 상당하십니다

Simplemente es impresionante, con que sencillez hace lo difícil 👌🏿👏🏿.

Espectacular 💯👍🏻👍🏻👍🏻

Super precízna práca výborný nápad👍👍👍👍

Perfect! Your ideas are very good

Parabens o melhor de todos

Well done 💯💯💯

*¡¡¡ EXCELENTE TRABAJO !!!* 👌 👍 MUY BUEN VIDEO. 👏✊👏👏👏✌️

Awesome stuff!

Excelente!!!

Gracias..!🇵🇪

Super nice

Wow!

Good work bro 👍👍

This is a real beauty!! -You're absolutely a genius, it's been a long time since I've seen such a versatile tool! While I was watching, I was thinking that you may want to make one for 6 sides (so you can have 3 sides of different length). This should allow you to not only make hexagons, but also triangles and any 6-sided shape with parallel sides of different length. -I really loved the use of the laser engraver. When I saw the thumbnail, I thought this tool was something you bought (so I'd say if you make sure they don't have sharp corners, you could sell them to those who want one but are not able to make them). And the video-editing was also "just right" - the video shows everything without being boring! 😃

@carpentak

Жыл бұрын

I saw some very nice honest comments. thank you so much.

@bc-ti4bq

5 ай бұрын

I think just adjusting the jig would be a nightmare. You can easily make the hexagon shape with his current design. Just use his angle attachment and you'll get as accurate a cut as you would using dedicated jig maybe even more accurate. AND with his angle attachment you can make just about any shape you want. Want a hexagon? Just set the angle block to 60 degrees and follow the previous edge around. Want a pentagon set the blocks to 72 degrees. What I'd really like to have is access to his plans. Why redesign what already works so well.

super!

You should have plans for this Takkie, this is very good.

Хороший шаблон. Я для себя не стал так сильно заморачиваться, сделал из алюминиевых профилей от торгового оборудования.

Excelente

lunghezza e larghezza che misure hanno, complimenti eccezionele bravissimo

гениально! фестул нервно курит в сторонке

У столяра, занимающийся своим любимым делом, будет нескончаемый набор инструментов и такой же нескончаемый набор приспособлений. Столярное дело очень широко развито и не ограничивается изготовлением окон, дверей и табуретов. Работа столяра сродни горению огня.

Necessity is the mother of invention! 👍

👌

기술의 신기함과 보여짐. 그뒤에 따라붙고 이어지는 응용과 창조는 많지만 군더더기 없는 실용의 끝판왕. 이런걸 원했어요. 한방에 정리되는 기술의 모둠버전

It's alot easier that you got all the tools needed to finish the project. Show the plan dimensionsand measurements.

Years ago i have built nearly the same router-template and its still in use. Bicycle-clamps as fasteners are really a good idea, its alway a bit tricky to adjust the nuts with a wrench. The t-slots at the bottom are also a good idea. And the laser-marking looks very professional. But i see that you make the same mistake: I also used a flush-cutter with top-ball-bearing. So you have a very small range for adjusting the milling-depth. And not only one time i was milling in the lower edge of the template, because the bearing was running in the slot instead at the top edge. So i used a copy-ring on the router and i can adjust the depth of the bit independently. You only have to observe the diameter-difference between copy-ring and router-bit.

@carpentak

Жыл бұрын

Of course, there are times when I also use copy-rings. However, in this video, instead of calculating the interval using copying, the point is to directly set the template once and perform the milling operation, so only those are shown. you're right. This method is suggested because you need to position the bearing as well as the depth of milling. However, digging deeply at once is not because it is too much for the router or bit. I can get deep if I clear the template and dig it out two or three times. This is possible because of the bearings. Because of the bearings, the bits do not cross the boundaries already worked. Digging deeper is possible.

¡Gracias!

@carpentak

Жыл бұрын

gracias!!

@carpentak

Жыл бұрын

Gracias!!

Hello this is N awesome , excellent work. I really love it. I want to make this thing, I wish you would have left a link to those clamps. I would I appreciate if you would instruct me to get those clamps. Thank you very much.

@carpentak

5 ай бұрын

It's a quick release clamp for bicycles. If you search like that, you'll find it. thank you

👏👏👏👏👏👏👏👏

👍👍👍👍

👏👏👏👏

looks like you have an improved dust collector for your Dewalt Miter Saw. Any chance of a video on it's making?

@carpentak

Жыл бұрын

그것은 오래전에 작업했고 영상은 만들지 않았습니다. 나의 인스타그램에 사진들은 있습니다. It was made a long time ago and no video was made. There are pictures on my Instagram.

Nice, but how much do all those tools cost to make something like that!!!!!!

겁나 멋져부러... 훌륭합니다.. 목재는 어떤 건가요?

@carpentak

Жыл бұрын

네 감사합니다. 고무나무집성판 입니다.

Precision from a perfect workshop. I'm lightyears far from that.

💫👌👍🤝😎

HOLA, EXCELENTE , MUY PROFESIONAL MUY EXACTO. PODRIAS INDICARME QUE ROUTER USAS Y COMO EVITAS QUE SALGA EL ASERRIN Y EL POLVO? EL GUARDAPOLVO ES HECHO POR TI O LO COMPRASTE? DONDE PUEDO VER MAS VIDEOS TUYOS? GRACIAS ANTICIPADAS

@carpentak

Жыл бұрын

Hello. I used Makita brand small router and the dust intake is included in the router package. See more videos on my channel. youtube.com/@carpentak

Very nice! Do you make plans for the projects you build? Are they for sale? Thank you!

@carpentak

Жыл бұрын

Thank you. I don't have plans. I can't make it

🙂👍👍

Con todas esas máquinas cualquiera hace herramientas..

Hi, Did you make yourself your plexiglass support for the router with its two handles or did you buy it. I think that you should have to do it by yourself. In this case, do you have a video for this equipment? Thanks.

@fabricem2744

Жыл бұрын

I found your video... oops ! Thanks

Nice product. where did you buy the terminals of the four conductors. This one with the lever.

@carpentak

Жыл бұрын

It is a QR clamp for bicycles. Find it at a bike parts store.

@barry.w.christie

Жыл бұрын

​@@carpentak And as I searched for a suitable clamp ... that is exactly what I came across👍

정말 멋지네요. 철물이름과 구매 url 궁금하네요?

@carpentak

8 ай бұрын

감사합니다. 철물은 자전거용 QR클램프 검색하면 찾을 겁니다.

How can I get plans to build it

Как подключается элек двиг от зернодробилки колектор к регул оборот

Not enough expensive machinery in this video :)

Nice jig. Where did you get the black latches from?

@carpentak

11 ай бұрын

If you search for QR clamps for bicycles, you will find them easily.

ottimo molto bello. li produci anche per venderli?

@carpentak

Жыл бұрын

thank you. I don't make for sale.

great design BUT where do you get the cam clamps??

@carpentak

Жыл бұрын

If you search for QR clamps for bicycles on Amazon, etc., you will find them quickly.

Very good as usual...and thanks for sharing! One question, how do you call and find the "handle clamps" that we can see at 4'35" of this video? Thanks in advance.

@carpentak

Жыл бұрын

It is a quick release clamp for bicycles. It is usually called a QR clamp.

@fabricem2744

Жыл бұрын

@@carpentak Good idea and thanks for the information. ;-)

@fabricem2744

Жыл бұрын

what was the size of these squared bolts? M3? M4?

@carpentak

Жыл бұрын

M6 is used for the clamp.

@fabricem2744

Жыл бұрын

@@carpentak Thank you. All your videos are full of interesting tricks and I really like your precision and quality in all your achievements. It is a pity that we are living so far away both of us... 🙂

Please comment! I need to know where to buy that kind of clamping lever handle, or the correct name of it. I can't find it ... please

@carpentak

Жыл бұрын

a.co/d/go5N9vy

Fantastic, which is the screw hardware name?🆗, Thanks at lot

@carpentak

Жыл бұрын

It is a quick release clamp for bicycles.

Что мешает запустить в серию????

do you sell plans for this router template???

@carpentak

Жыл бұрын

I don't have plans.

please use push stick.

Hiya, What are the clamps on the adjustable router jig called?

@carpentak

Жыл бұрын

This is a quick release clamp for bicycles.

@martinfallaize2947

Жыл бұрын

@@carpentak tks