*_Check out the video to see how you can upgrade from the Basic Screen to the full 4x4 Info & Phone Screen. All for FREE - just 15 minutes of your time. Disclaimer: You do this at your own risk, no liability is accepted at all. Its worked for me :)_*

@simonemmott7060

3 жыл бұрын

Hi great video. Did it allow hand free calling when you didn't have it originally?. Thanks

@GGAviation

3 жыл бұрын

@@simonemmott7060 Try connecting from your phone and enter the code 2121

@alainpatate

2 жыл бұрын

@@GGAviation did you get the camera to work i tried on the 3 fakra connector but nothing no video on the screen..

@besttourinrio9

2 жыл бұрын

this is a hope to get near camera. I get a Land Rover Discovery 3 TDV6 HSE 2006. Did everything as described but couldn’t get the near camera view on the screen. Any suggestions? And after some reading here next I need the scanner IID toll for the system recognize the camera. Problems: That bluetooth scanner cost around U$650 ( US dollars today ) So I need to find some one who can have it here in Brazil. Also after cutting the middle yellow wire screen gets darker so I still need to find what should I be soldering in.

@SueDohman

4 ай бұрын

Hi, this is an awesome tip! Is the adaptor spelled “fakra?” Trying to find one to order online. But wasn’t sure of the exact spelling. Thanks!

Brilliant upgrade to screen, Didn't do the camera bit but the extra screen options are a real improvement, thanks very much.

@GGAviation

3 жыл бұрын

Glad it helped

Absolutely in-cre-di-ble!. It works!!. From a simple 2 box old menu to a newly 6 one!. The physical buttons don't work fine now, but it doesn't matter at all with this magnificent update. Thank you very very much!

@GGAviation

2 жыл бұрын

Happy it helps :)

That's insane! Bought mine with "wrong" navigation, so the whole screen was pretty useless until i tried this. Can't believe how easy this was. 10-15 min max indeed! Thank you good Sir, for sharing this gem with us "low spec" LR3 owners!

@GGAviation

2 жыл бұрын

Glad I could help!

Yeah what a good bit of advise! I didn’t even need to take out the radio just moved the facia forward and got the updated screen! Thanks a lot so much better!

I Stumbled across this video, I tried it and hooray it worked 😂😂😂😂. I think it all goes down to the simplicity of the presentation by GG Aviation even some of us who are hopeless on mechanics felt it can be done 👏🏽👏🏽👏🏽😂

@GGAviation

2 жыл бұрын

Glad it helped! What a lovely comment - thank you

I honestly thought this would be a load of rubbish and couldn’t possibly work, until five minute later I did as shown here and it works like it was always like that from the factory… Thank GG Aviation you are an absolute legend 🥳

@GGAviation

2 жыл бұрын

Thank you :)

Wow! Just tried this. It literally took me 15 minutes. I didn’t completely remove my unit, I just pulled it out slightly and removed the wire with the safety pin taped it up. Then refitted everything and it works! Full access to the 4x4 menu and all the other features. Very impressed!

Thanks mate worked a treat! I chose to just pull back the tape and cut wire then put close ends on each wire as I couldn't get the wire out of the connector and I was getting pretty rough with it and it's quite fragile.

@GGAviation

2 жыл бұрын

Glad it helped

Works great. Thanks. Pulling out the center wire was the difficult part. Had to apply quite a bit of pressure. Great vid

Thanks GG Aviation, what a great guide to enabling a free software upgrade! I followed your video today and it all worked fine. Pulling out the little yellow wire was quite a bit harder than I was expecting, a pair of really fine nosed pliers would be a help. Pushing the safety pin in didn't seem to make a difference for mine, but my technique may be a bit sus. Anyway, all good and really did only take 15-20 mins.

@GGAviation

3 жыл бұрын

Thank you for such a great comment - happy it worked for you :)

Great Info, great footage,keep rocking 💐💐

@GGAviation

3 жыл бұрын

Thank you so much 👍

Honestly i was sceptical at 1st but let me be the 1st to say I was so wrong to doubt!! 8 screws and a tweezer to pull the wire out and plugged it all back in i now have the upgrade. Cheers pal 👍👍

Just Don it this morning fantastic thank you very much for your video

@GGAviation

3 жыл бұрын

You are very welcome

To cut the wire is a easy task and see the screen showing the new functions. Hard is to make them work. I still didn’t give up !

awesome video, thanks a lot!

Thank you GG Aviation, great video. All worked fine accept when I tapped on the phone, it said phone not fitted

@GGAviation

2 жыл бұрын

Not sure,but you may need the bluetooth module. Have you tried a youtube search on the Phone Code to enter to accept bluetooth? Worth a try :)

hi worked fine on my rr sport 2010!! thx

@GGAviation

2 жыл бұрын

Glad it helped

Thanks works great.

Works 100%

It works ! THX :)

@GGAviation

3 жыл бұрын

Excellent :)

Awesome!

Very interesting video just a quick question where are the light bulbs for the display mine hasn’t got the day time light only the night light which is duller as you know thanks in advance 👍

Hola! espectacular video! Tengo RRS del 2007 sin camara de marcha atras. Funcionará esta modificación en mi vehiculo? Gracias

@GGAviation

2 жыл бұрын

You need a FAKRA cable to connect the camera :)

Thanks thanks thanks 👍👍👍👍👍👍👍👍👍👍👍👍👍👍 its working

@GGAviation

3 жыл бұрын

Welcome 👍

Thank you for this post, it looks very interesting, i have a couple of questions. Firstly does the reversing camera initialize when reverse gear is selected? And secondly will my apple phone automatically connect via Bluetooth. I have an LR3 HSE 2007.

Thanx a lot GG AVIATION for helpful information, software issue is working properly, I have 2 questions plzzz Can we make audio work with the Bluetooth?? Do I need any adaptor for reverse camera to work on the screen?? Thanx again for your interest and reply... 💖

@GGAviation

2 жыл бұрын

HI, I have seen youtube videos about connecting to the bluetooth - there is a 4 digit code to put in. The reverse camera or Tv modules run on a cable called FAKRA - but you have to have certain modules in place for the FAKRA in/out to work :)

I’ve done this today. 👍. Waiting for the camera to arrive next week. What about all of the other features. Do they all work? Some of the fields are blank. Also do you need a gvif module to allow the camera to work? Does anything need enabling?

Thanks for these information.. after following thes instructions the 4×4 info it will work fine or gast freezing info and photo ??????

@GGAviation

3 жыл бұрын

Yes it will work fine - all the 4x4 info, including where the wheels point - which helps when off-road

Adding the reverse camera will it switch automatically when you put it in reverse or do you have to power up the camera when the reverse lights come on and the unit switches when it senses a video input?

Nice video, can you do one installing the camera

@GGAviation

2 жыл бұрын

Yes I could have, but i have sold my Land Rover now. The camera connected by FAKRA cable to the rear of the Denso Screen, but you need a Gap Tool or similar to enable it :(

Did the brightness change so it can't be seen very easily during the day ? Mine has had it done before I bought .

This worked just did it in my d3 I almost paid someone to program them in quick question got the reverse cam how can I see the TV option please

Does this work on the RRS aswell as only have settings 4x4 and nav and would love the phone function or is it just on a disco thanks

@GGAviation

3 жыл бұрын

I think this works for the DENSO screen only, so if your RRS is 05-09 then I guess you have the denso screen?

@AndyK.1

3 жыл бұрын

RRS is the same. However for phone functions to work you need the phone module installed and therefore it would already be on your screen menu.

While to menu system is upgraded, I now have a screen that is too dull to be useful. I tried increasing the brightness in the settings but no change? Do you have any suggestions?

@didier.di.chiara

3 жыл бұрын

Same problem. Solution ? Thanks (LR3 2005 2,7 litres diesel)

@AndyK.1

3 жыл бұрын

Search panoramix brightness

@didier.di.chiara

3 жыл бұрын

@@AndyK.1 Thanks about answer but i did...and it’s not enough

@GGAviation

2 жыл бұрын

If you search on Disco3 Forum, there is a discussion and photos of a diode you can solder. Also try turning up the brightness for the instrument cluster :) May help a bit

I no it’s a year old but I’m going to give it a go . Could you help with what lead I would need for tv to work on the screen . Cheers thanks for the video

@GGAviation

2 жыл бұрын

The lead is a FAKRA connector, but you need the TV modules installed also :)

I've added the camera and disconnected the wire and cut the wires for reverse lines and image. But image in still flipped. Any ideas?

Did the mod however none of the on road info is displayed? Items like fuel consumption, avg fuel trip etc.... Anyone else experience this? I have an '07 V8 HSE

@GGAviation

2 жыл бұрын

Some people put a switch on the removeable cable, so they can flip between screens

Bit late to the party but did you ever plumb in a reverse camera. I'd like to do it on my 2006 L200 RR so the screen switches to the cam when in reverse gear. I figured out how to wire the cam to the lights, but if I connected directly it to the socket behind the screen would it do this? Great video btw.

@AndyK.1

Жыл бұрын

No. You need to edit the Ccf with a £500 tool to say a camera is fitted.

@eugeneyoung2803

Жыл бұрын

@@AndyK.1 What is ccf? You mean an OBD scanner coding process is needed?

@AndyK.1

Жыл бұрын

@@eugeneyoung2803 Yes. Car Configuration File. But not many OBD tools can do it. Only ones around £500

Could you use the other fakra connectors to add additional cameras, like a front camera? Has anyone used the IID tool to active the reverse camera?

@scottmcdonald1819

2 жыл бұрын

How long was the Fakra Cable?

@GGAviation

2 жыл бұрын

There are 3 fakra connectors on the rear of the Denso screen

@GGAviation

2 жыл бұрын

Fakra cables are typically 6 inch long, but have an AV type connector on the end, so really easy to extend

@besttourinrio9

2 жыл бұрын

So the IID tool is needed to active the reverse camera? I did everything as described on the video but didn’t get the reserve camera view. So maybe the IID tool would be the answer ?

@AndyK.1

Жыл бұрын

@@besttourinrio9 Yes. In Ccf set rear cam to fitted

Does anyone know if this screen can be fitted to D3 that did not have it, and I have an after market audio head unit

Great piece of information! How can I change the language of the screen? I need to change it from German into English. Tks!

@GGAviation

2 жыл бұрын

I do not know, sorry for the late reply :)

I am very interested in upgrading my screen mainly for phone function, so for clarification, to get that upgrade all I do is remove and insulate the central yellow wire on the button panel of the screen. As directed in your video. as I do not wish to add camera or video device is this all that needs doing.

@GGAviation

2 жыл бұрын

also try a youtube search on the code needed to allow bluetooth connection :)

I just did this. It works, but now my screen is very dim. I have tried increasing the brightness. Didn't help. Anytime else come across this problem?

Hi I would.lijw to know is the TV setting will be available in the new menu after I follow your process

@GGAviation

2 жыл бұрын

yes it will, but you need the tv module hardware installed also, second hand on ebay they are quite cheap now

thanks man ! works perfect 👍🏻 best spend 15 min this week 😁

@GGAviation

2 жыл бұрын

No problem 👍

Hello friend, I have seen this video and I have done it in my discovery 3. The problem is the brightness of the screen is very dark and when it is illuminated by daylight it looks very dark. Could the brightness of the screen be increased?

@KyleThiessen23

Жыл бұрын

I’d like to know this as well…plus non of the “extra” menus don’t calculate…

Hi there, cable 4 goes into hole 5?

I have an odd thing going on with my system on a 2005 LR3 HSE. The screen and the radio were presumed dead when I bought it. However, while on a drive the other day both the info screen and the radio lit up with the info screen just showing LAND ROVER and the radio lighting up but showing no information and no sound...thoughts? I am changing out the entire radio system so no worries there, but the info screen I'm not sure what's going on there...any information or help you could share would be appreciated.

@calin8235

2 жыл бұрын

Most system fiber optic loop , you can buy it on eBay or Amazon for about 6💲, I bet that will fix your radio

@mranderson2125

2 жыл бұрын

I’ve heard replacing the old amp will fix that.

Just did this and for some weird reason, the radio volume didn't work either with the knob or steering wheel buttons. I had to revert back...

Worked fine on my 2009 RRS but the setting button takes me to Sat nav and the Sat navbutton takes me to the phone? Anyone have any idea what needs to be done to swap buttons to take me to the right option i select? Regards

@Fafayega

Жыл бұрын

Hi, did you resolve this issue? Having similar issue.

Someone said this can be done with the IID tool. Does anyone know where in the CCF files?

@GGAviation

2 жыл бұрын

Try the Landrover Forums on google, they have some superb info and step by step guides :)

И что это даёт? Новое меню головного устройства? Или появится ТВ и aux?

Can’t you add the 4x4i screen with the gap iid tool ?

@laurentlazzarini1344

3 жыл бұрын

Oui, tu peux activer l'écran info 4x4 avec IIDTOOL.

@GGAviation

3 жыл бұрын

Yes you can, you can upload the ccf file - but the tool is £450 ?? So this is an easy way to get around paying lots for the 4x4 info screen

Does anyone have any idea how I can do this on Discovery 4? Tnx 🙏

@GGAviation

2 жыл бұрын

try www.disco3.co.uk/forum/ see if there is any info there. Its a great source

Anybody know how to get the day time back lights to work?

I didn’t get how you changed from Land Rover to Range Rover mode?

@GGAviation

2 жыл бұрын

Yes, i think they call it RR Mode

@gurveersingh3180

2 жыл бұрын

@@GGAviation But how did you do it, was it something you had to connect?

@gurveersingh3180

2 жыл бұрын

Do you just disconnect the forth wire on the back and it becomes the Range Rover screen?

Seems like the road info is not available 😞 once activated

@GGAviation

2 жыл бұрын

I think some people put a switch into the cable, so they can flip between 4x4 info and the original screen

i didnt get it... what do i have to do to change to this screen?

I can’t believe it’s worked out 2005 discover

Do you still have secret menu's list?

@Fafayega

Жыл бұрын

Yes still do

Only problem I have is no control over sound

Dose it recognize the camera or dose something need to be programmed

@GGAviation

2 жыл бұрын

I had a reverse camera running on it - but there is a 4 digit code to enter first. Search for the hidden menu code for Discovery 3 :)

guess what im doing tomorrow lol

@GGAviation

3 жыл бұрын

Its worth doing :)

@daz.j

3 жыл бұрын

@@GGAviation how much darker is it when done?

@GGAviation

3 жыл бұрын

@@daz.j It does go a little darker, but you can still push up the brightness in the on screen settings and the control on the dashboard next to the headlight switch