hope you enjoyed this vid legends 👌 I'm hoping to hit the tracks really soon for some 4wd content now restrictions are easing in VIC. If you guys are making a purchase using the link in the description don't forget to use the discount Code 💥JPCAPTURED💥 at the checkout screen. This discount code is valid until the end of November ✌️

@banjojo27

Жыл бұрын

Is there a current discount code?

💯 Facts Bro 0:18 😂😂

Watched it again. One of my next mods. You are a Legend as always!!!!!

Cant believe the factory breather set up - I thought they at least had one way valves or SOMETHING on the end of the hoses instead of nothing at all! Great video maaaaarte. So detailed and entertaining the whole way through. Really appreciate the first class content. Subscribed 🤙

You’re the man JP. This guide is epic and answers every question I had (apart from whether the fuel tank breather is necessary, still can’t find a straight answer on the FB groups 😅). Can also be done without a hoist, though a bit stiff the next day. If anyone with an NP300 reads this comment, I used the DieselBoss 6-port kit for $98. Not quite what I was expecting for $98, but did the job in the end. One of the fittings sheared off and gave me a near heart attack, but was redeemed by the Allen key internals which allowed me to remove it. The included hose would not fit over 3 of the 4 factory connections even using the heat gun, so had to piggyback off existing pipes. Could probably do with twice the zip ties too. Otherwise fits perfect in this same spot that JP used with a sneaky rivnut.

I do like this setup all 4 are on the bottom looks way neater with all the lines setup then the arb Setup that 2 are on bottom and 2 are on top

Well done brother. Makes me extremely happy to see an Aussie youtuber demonstrating some helpful and relatively easy mods to do to a car that wouldnt get much attention otherwise. Already helped with a couple of my mods. Keep up the good work, ill hang around for a long time💪🏻

@jpcaptured799

3 жыл бұрын

Thanks for watching Reece, and appreciate your positivity mate 👍

Defo a great installation mate. Cheers to more quality content!

@jpcaptured799

3 жыл бұрын

Much appreciated!

Thanks mate, watched your vid before I installed mine.

I shall commend you for all the skits you put in your vids. Always enjoyable. Keep up the great work, would be keen on some merch.

@jpcaptured799

3 жыл бұрын

cheers man 👍😀

Awesome mate thank you for sharing

Nice install a must have kit👍👍🇬🇧

Thinking about installing diff breather kit on my D40, found this video really helpful man! Thank you alot!!! Hello from sunny Darwin

Love that this kit comes with more the. 4 fittings the arb only comes with 4 fittings that is sweet

Great video thanks

The manifold can benefit from being placed up under a cover to act as an airpocket. Or on the rear of the body, or as high as possible up behind the tray headboard, these spots definitely benefit from a protective cover above the manifold to prevent dust settling on the breather ports getting wet and turning to mud that dries and seals the porous breather elements on the manifold. Some items most people miss is the winch and/any compressors for difflocks/airbags/onboard air systems. Basically anything with a sealed, protruding output shaft that tends to get hot when operational and is subjected to being immersed in water.

@AntonioClaudioMichael

10 ай бұрын

Agree

Go for it bro, I’d wear a jumper when I’m camping 🤙

@jpcaptured799

3 жыл бұрын

thanks man 🙌

Once lockdown is finished, get the modified np300 to go to Portland for the sand dune driving, it's the only place you can drive on the beach in Victoria and is massive!

Nice work, well done 👍

@jpcaptured799

3 жыл бұрын

hey mate you changed your profile pic, almost didn't recognise ya 😀

@georgesdesk

3 жыл бұрын

@@jpcaptured799 LOL Nice scenery as a change

Very helpful indeed. Yes u should have apparels decals and what other ideas u have. Yes yur hoodie looks great.. howz is the rear bumper shaping up? Also i notice you have no rear diff bar. Did you remove it, and why?

Hey mate been following from the start. Youve done it anc convinced me. You and RoamLyfe have done it haha. Tommorow is the day I join the nav crew hahah yeww

@jpcaptured799

3 жыл бұрын

did you end up getting yourself into a nav Will?

@willtalbottt

3 жыл бұрын

@@jpcaptured799 Yes mate! D22 on 33's and a 4inch lift is the build up so far shes a beauty. :)

great vid. is i have an ARB diff breather on my nav. but only 4 x 8mm-1/8 BSP Push in fittings that fits the manifold. is it the same push in fittings to tread with the diffs?

the 2.5 np300s from Thailand come with breather lines into the engine bay and the bak is run up to the top of tray

@jpcaptured799

3 жыл бұрын

lucky

Hey mate cheers for the awesome content 👌 Curious to know if your looking at installing a catch can in the future ? Cheers

@jpcaptured799

2 жыл бұрын

I am looking to install a catch can in the near future mate. I just need to find the time.

I like your limb guards, Where did you get them ???

Loved the vid! Was wondering when you’re going to do a catch can and pre fuel filter vid?

@jpcaptured799

3 жыл бұрын

I have a catch can kit sitting on the shelf ready to go on. But I have seen some adverse effects from the catch can install on these engines. So I have more research to do before i do an install vid for you guys.

@joelramjass3604

3 жыл бұрын

@@jpcaptured799 i have my pcv system jus breathing under the van. I have intentions of connecting it to the exhaust muffler

@bradyphelan8601

3 жыл бұрын

@@jpcaptured799 would love to hear what research you find out, as I’m about to fit a catch can myself. I haven’t heard any cons about it but your opinion would be great 👍🏼

make also a video for Oil CAtch Can

I have arb Diff Breather Kits on all my rigs

What is the hose inside diamter and outside diameter?

Nightmare of a job for 2017 Sr5 Hilux. front diff has two breathers for the ADD and two breathers in the transfer case plus the front and rear diff, except the rear rear all of them are in an impossible spot. I never finished it lol

@jpcaptured799

3 жыл бұрын

That sucks man.. it's not like Toyota to make things that hard normally..

Arb diff Breather kit is 82 bucks does the same thing and had a nice filter compared to this kit being 115 bucks

Came out nice 22:53

Only problem with ur merch is that it will be NP300 merch and not Nav merch? I own a D40. Thanks for the vid, cheers.

can you please do one for the hilux?

I reckon at least some stickers would be sweet!

@jpcaptured799

3 жыл бұрын

done, cheers bro.

@gorlie12

3 жыл бұрын

@@jpcaptured799 as soon as I get my new NP300 I’ll be sure to slap one on 👍 keep up the awesome content!

@gorlie12

3 жыл бұрын

@@jpcaptured799 how’d you go getting stickers? 😅

@jpcaptured799

3 жыл бұрын

@gorlie12 still working on a design 😅 i promise they will eventually happen.

Hmmm, JP. Us jou pa 'n boer?

Catch can install?

How to protect the electrical?

Any idea where I can get these kits in Europe, and a 6 port for a Nissan Pathfinder r51? Thanks

@jpcaptured799

2 жыл бұрын

sorry i am not sure about Europe, but I believe that the 4wd shed would ship internationally.

Where the stickers at mate? Shed sessions

Just plumb them into the air-box, then they have snorkel clearance too...

Any chance of fitting tailgate struts

@jpcaptured799

3 жыл бұрын

I have thought about it man

Did you do the fuel tank breather?

@jpcaptured799

3 жыл бұрын

nope, i do have spare ports on the manifold though 😏 should use em up

Where can I get the Club Np300 hoodie?

@jpcaptured799

3 жыл бұрын

hit up Chris from Clubnp300 on intsa

Anyway to test it works before you hit the water?

@jpcaptured799

3 жыл бұрын

not that I know of, someone else may be able to comment with an idea.

So I got my first car and my dad made was trying to make me drive though a bog hole and this is my first time driving the thing and I don’t even have my L’s

@jpcaptured799

3 жыл бұрын

he's that passenger i was talking about hahaha 😆👌

@juststuffwithwolfe4482

3 жыл бұрын

@@jpcaptured799 yeah I know but he being doing stuff like the since he was 6

@jpcaptured799

3 жыл бұрын

@Just stuff With Wolfe perfect bloke to have as your wingman offroad then 👌

@juststuffwithwolfe4482

3 жыл бұрын

@@jpcaptured799 well he is a trucker so his not home much so I don’t know how to 4WD but I do know how to to donuts and stuff In the paddocks and I just watch 4WD videos

When will the gme install be done ?

@jpcaptured799

3 жыл бұрын

Most likely my next video to drop will be GME install

Can we use the these breathers in old school diesel engine s like trooper 3.1

@jpcaptured799

3 жыл бұрын

i'm sure the 4wd shed would have a kit to suit. maybe give them a call and check 🙏

Can u run from the manifold connect to the snorkel?

@jpcaptured799

3 жыл бұрын

Yes you can, it actually has this option in the instructions 👍

@meldrian

3 жыл бұрын

@@jpcaptured799 i thought it was a good idea but didnt know it was already in the instructions as well. Thanks for the reply!

Two comments. Firstly you shouldn't cut air lines with snips use a blade instead as it doesn't warp the end of the hose. (Was told this by a mechanic) Secondly you should do a video on relocating the boost solenoids up the that bracket. Great videos tho bud.

@jpcaptured799

3 жыл бұрын

literally as I cut the lines I was like, yup someone is going to comment on using cutters 😆👌 yeh maybe, they do seem to be problematic, cheers.

@jpcaptured799

3 жыл бұрын

Can confirm boost solenoids are now on the list 👌

@fwuk2758

2 жыл бұрын

@@jpcaptured799 Need a boost solenoid location video aswell mine always get mud in the filters 😅 Any fixes to this?

Good info but you need to crank itt down a notch. You sound like one of the million other influencers out there.