Here is one of our newer videos! Enjoy 😁 kzread.info/dash/bejne/l4iT1c6cqKW8YbQ.html

@teekate8686

9 ай бұрын

3:52 4:04 4:05 4:08 😅

@michaelsmithscott9651

2 ай бұрын

You are a very attractive guy man and explain things so easily for folks to understand and get it.

This video was awesome quality. Easy to understand and the camera angles on every step really make this video top tier. Thank you.

@dudewecanfixit

3 жыл бұрын

Thank you for the fantastic review! Please subscribe to our channel

@billbonu1639

4 ай бұрын

Yeah we need a siskle and Ebert type of reviewers for these videos.two thumbs up and all.

Toyota tech of 8-9 years here. Best tutorial I’ve ever seen. Thank you.

@dudewecanfixit

2 жыл бұрын

Thank you for the comment! My first car is a 98 Camry that I still drive daily and is about to hit 500k! I have a few videos doing repairs on it

Had to come by and comment, after watching this video and the rear main seal video several times I was confident enough to attack my rear main seal. It took 13 hours with a couple friends helping. Take your time and it will go fine. I did not drain the transmission, nor did I remove the driveshaft from the tail shaft. I wasn't sure, and am still not sure if the fluid would come out if I had pulled the drive shaft. We did experience some minor leakage from the dip stick tube hole in the trans but not much. Thank you again for this wonderful 4l60E series! PS to everyone reading comments, find your inner Zen before you thread the torque converter bolts back in. I dropped the first one into the bell housing. Luckily after several frustrating minutes I was able to snag it blindly with a magnet. It could have been pull the transmission again but I got lucky, take your time with this step!

@dudewecanfixit

Жыл бұрын

Wow, that is great! I'm glad you got it done and you are an inspiration to all!!!

@trentpierce7656

Жыл бұрын

@@dudewecanfixit Had I pulled the driveshaft out of the tail piece, would the fluid have leaked out? I have a suspicion that there is a seal and it wouldn't have but I could not find a definitive answer anywhere and this was a serious broke man budget fix, fluid would have pushed me over the shoe string budget.

@dudewecanfixit

Жыл бұрын

No, the fluid would not have poured out. You may have lost a little fluid that got past the output shaft bushing, but not much.

@trentpierce7656

Жыл бұрын

@@dudewecanfixit I appreciate the feedback! I hope it helps someone reading the comments! Even without pulling the shaft it was only a minor inconvenience since I only had to roll the trans back enough to access the rear main seal. Thanks again!

@chrisbro6779

6 ай бұрын

These are all super helpful thank you

Jesus man, you made it look incredibly easy. I guess when you have the right tools everything flows smoothly. Thanks for the video man!

@dudewecanfixit

2 жыл бұрын

Overall, it's a pretty simple job. Just takes lots of patience

Dude! Now THAT is a tutorial! I’m off to buy a wobble socket.

@dudewecanfixit

3 жыл бұрын

Git-r-done! You can do it!

@jamesco0329

3 ай бұрын

I definitely need one of those. And about 5 feet of extensions.

@ALCRAN2010

Ай бұрын

​@@jamesco0329six feet of wobble extensions is about right!

Just finished replacing the rear main seal (RMS) on my Yukon and not a leak anywhere! Thanks guys for this awesome tutorial! Few tips for anyone attempting this repair. 1. Mark the position of the driveshaft at universal joint (paint marker) 2. Mark driveshaft at rear of transmission (paint marker) 3. Mark relationship of torque converter to drive plate through inspection plate at bottom of the trans. These must align during install. 4. Clean alignment dowels protruding from engine block and holes in the trans. Use some emory cloth to remove the rust and add a light coat of anti seize. Makes for smooth install. 5. RMS install. PTFE (newer style seal) goes in dry. No lube is necessary to install in seal to the RMS plate. 6. Clean RMS plate and engine block mating surfaces. Especially the bottom corners where the engine block meets the oil pan. Cleaned mine 3 times with brake cleaner.

@dudewecanfixit

2 жыл бұрын

Good job, and thank you for the tips! Myself and anyone else who reads this will appreciate this post!

I love do it yourself video's. I always search for them before going somewhere or calling someone. This is great!

Good video. Never been good with cars but is good to know that I can find this type of tutorial to make my process a little bit easier. Keep going, guys!

So happy it’s finally coming out!

Definitely one of the most crystal clear how to videos great job thank you!!

@dudewecanfixit

2 жыл бұрын

Thank you for the feedback! We try to make these videos to the best of our ability

One of the best repair videos I've seen in my life. Crystal clear, great angles, and straight to the point. Thanks for the work you guys put into this and saving me so much time by keeping this short!

@dudewecanfixit

7 ай бұрын

Thank you so much for the thoughtful comment!

You make it look so easy so glad I found this channel

This is such a great series!

Amazing video! Stoked for this series

Damn this is the best video i have watched on how to remove the transmission and I have watched a lot on here so far. You went in a great length of details and showed exactly what to do with plenty of light. Thanks for this video, no I just have to get up the nerve to swap mine out now. Thanks

@dudewecanfixit

3 жыл бұрын

Thank you for the comment, we try really hard to provide the best informational videos out there. Please subscribe and share our channel!

Very thorough and helpful! I was able to rebuild my transmission off of this series!

@dudewecanfixit

3 жыл бұрын

Thank you for the nice comment Joe!

@89Johneboy

2 жыл бұрын

im starting my 96 burban rebuild today! but my exhaust is stuck on bc they tried to fix a leak with the putty stuff... gonna cut it off to get out the tranny =(

@dudewecanfixit

2 жыл бұрын

That's very unfortunate, but you can do it!

Thanks! You helped me out alot! I finally have my 4L60E out of my c2500 and ready to put my new one back in. Couldn't have done it without you! 🤙🏼🤙🏼🤙🏼💯

@dudewecanfixit

3 жыл бұрын

That's great! I'm glad we could be of assistance. Check out our install video as well

A few things to remember: 1. While this is common sense, you should remember that when you take off the Transmission support, have a jack with some wood to under the transmission pan to hold the weight of the transmission. If you don't it can put stress on your engine mounts, which can give you a completely different problem. 2. When undoing the gear selector cable (at least on my suburban) there was also a large metal clip that looks like an unused staple. You have to pull that out with a flat head screwdriver before you can squeeze it and pop it out of place. 3. There is another bolt that holds some lines above the connectors that you have to heat up. It looks like a 8mm bolt that holds a bracket to the driver's side of the transmission. 4. This is more of an observation of the video itself. While it was very helpful and to the point, there were a few key things missing that made me question some things. I did notice that there were a couple times where the transmission didn't look supported the entire time the support bar was gone. This can potentially cause damage to the engine and engine mounts. There were a few brackets/clips that were not mentioned. I figure that is probably due in part to the fact that he said this transmission has been taken off before, so it may not gave all of its original pieces. That being said this was an extremely helpful video. Though I would suggest adding the step of supporting the transmission.

@dudewecanfixit

2 жыл бұрын

Thank you for the well thought out comment. On my next transmission series, I will definitely consider adding some of these steps.

Awesome keep them coming this is how I fix things looking at KZread video on fix or repairs. I actually learned to change my own starter from video like this

You have no idea How helpful this is or will be. I have some transmission work to do in a few days and this was by far the most detailed how to video I have seen. Thank you so much.

@dudewecanfixit

Жыл бұрын

Glad it helped!

What a cute pup! Thanks for all the great info!

Dude, you are the man!!! Thank You so very much for providing this video. Because of you I have officially saved myself about $1500-$2000. I paid a mechanic to replace my transmission about a month ago, and unfortunately the transmission lost the 3rd and 4th gear clutches about a week later. So instead of having to pay another 15k I was able to remove the transmission and send it off for repair and reinstall it afterwards. Keep doing the great work you do. You sir are a saint among men!! Thanks again.

@dudewecanfixit

3 жыл бұрын

Thank you so much for the kind comment! Please subscribe and share our channel!

@odiarroyo6144

2 жыл бұрын

I have the same problem Were did you send it for repair to?

The series looks absolutely amazing!! 😍

I love watching tutorials! I have saved so much money by doing things myself. I admit this is a job I would leave to my son though. lol

I swear mechanics are wizards. I have real respect for the knowledge you have and the ability to use it.

@dudewecanfixit

3 жыл бұрын

Thanks! We appreciate the comments

Great channel for the aspiring do it yourself home mechanics!

Thank you the video breakdown. I used this as video reference for removing my engine due to a gouged piston head. The bell housing bolts on top were a bit inconvenient. However, I had previously removed the upper portion of the engine (intake, fuel lines, exhaust manifolds etc.) which made those top bolts very accessible. Again, thank you good sir!

@dudewecanfixit

2 жыл бұрын

I'm glad this was useful to you!

Most professional, straight forward, easy to understand videos I've watched for one of the more complex undertakings. Considering doing this project myself one of these days but putting it off as it's such a slight leak. I'm sure myself amongst others after watching this now say "I can do it!" then when it comes time I'm sure I'll run into 27 unexpected problems and delays as I do with most of my repair projects 😮

@dudewecanfixit

Жыл бұрын

Thanks! I love getting feedback from considerate humans such as yourself!

@danieleast8143

Жыл бұрын

Current situation.

@David-rx5eo

9 ай бұрын

If you decide to do it Harbor Freight sells a scissor type transmission jack for a decent price.

Glad you went into detail on those E clips!

@dudewecanfixit

3 жыл бұрын

Most definitely, we try not to leave anything out.

Great video! The instructions were very easy to understand and thorough!

@dudewecanfixit

3 жыл бұрын

Thank you!

I love your 4 legged helper! This helped hubby so much, because we had to replace ours!

@dudewecanfixit

3 жыл бұрын

We are so glad it helped! Please subscribe and share our channel so we can keep producing videos!

Thanks! I had my 4L60E transmission for a 2002 Chevy Express van lose 3-4 gear. I called shops that wanted a lot of money or refused the job. It was your videos that got my van working again. I was able to follow your instructions to remove the transmission myself with the needed info on using heat gun to un-glue connection and the close up of e-clip removal. I did send the transmission to a machine shop for repair but still was able to save over $ 2K because of your videos!

@dudewecanfixit

Жыл бұрын

That's fantastic! I'm glad we could help! Please consider subscribing to our channel

@idecidenotyou

7 ай бұрын

No need to send 50 bucks.. that's was stupid

@adamsfamilybaseball2929

29 күн бұрын

@@idecidenotyou Or, it was a decent thing to do? Dude made a Grade A video. Another guy saved $1000s of dollars based off of the guy's hard work. "that's was stupid" shows us a lot about you. Great video.

Absolutely obsessed with this series!

THANK YOU for the tool list as your removing. That in itself is half the job, otherwise I'd be hunting and pecking the whole time. Great Video man!

@dudewecanfixit

2 жыл бұрын

Definitely! I try to make these videos as helpful as possible

Quality! Thanks for all the hard work in producing this video.

@dudewecanfixit

Жыл бұрын

You're welcome, I'm glad you enjoyed it!

Great job explaining things and showing how the trans line clips work. Thanks!

@dudewecanfixit

3 жыл бұрын

I'm glad you enjoyed it! Please subscribe and share our channel.

@DonBMW

2 жыл бұрын

Agreed. After I removed the lines I remember I man here said reinstall the clips so you can just push the lines back in during install. What a time and frustration saver!

So simple and easy. Thank you guys for that!

@vincentgomez4435

3 жыл бұрын

So simple that's by far from simple unless you have a lift ...

@randallstewart8487

3 жыл бұрын

@@vincentgomez4435 You have to get it up high enough to slide trans out,use good safety stands and block wheels for added safety!

@dudewecanfixit

3 жыл бұрын

It's not bad. I don't have a lift, just make sure you have good jack stands with adequate height

awesome vid. bout to take my 4l60e outta my 04 tahoe and this is the best video i've found on the subject. love the straight forwardness!

@dudewecanfixit

Жыл бұрын

Sweet! Just keep in mind things won’t go as planned and you’ll have to prepare mentally for the hang up and snags 😂 but you got this! If you have any questions give us a shout

I don’t regularly comment on videos but holy crap!!! This is the best LS transmission removal vídeo ever! Great job 👏🏼👏🏼👏🏼

@dudewecanfixit

Жыл бұрын

Thanks!

That's such a cute dog!

Tony can fix anything. But Sam and tony together? Unstoppable

@dudewecanfixit

3 жыл бұрын

Sam is the boss, I just do what he tells me

for sure the best video about 4l60e removal on KZread, I´ve seen a lot of video but only by this one I understood everything.

@dudewecanfixit

2 жыл бұрын

Thank you for the kind words! Happy we were able to help. Make sure to subscribe for future videos!

Fantastic video. I love the editing particularly when you have the fasteners already loosened so there's no dead time watching your struggles

@dudewecanfixit

2 күн бұрын

Thank you for the kind words! Lol, trying to make it as efficient as possible

Love the dog! Lol. This will be a great series

Great informative video! Thank you so much!

You know what!!!!? You deserve an update and a sub. Good video dude

This is Incredible, I see a lot of avalanches for sale and worry about transmission problems. I definitely confident I could do a transmission swap with this video if it popped up after buying one.

@dudewecanfixit

2 жыл бұрын

Glad it was helpful!

Great video! Thank you for taking the time to make it for people like us! My 6L80 transmission weight out on my GMC Sierra 1500 SLE. I searched KZread for a removal video and this was the best one I could find even though this is for the 4L60E it was close enough!

@dudewecanfixit

Жыл бұрын

That's awesome! I'm glad we were able to help!

Finally! Such a simple and easy to follow video. Ready for the rest of the series

@dudewecanfixit

3 жыл бұрын

Thanks!

@idecidenotyou

7 ай бұрын

Series..?😂😂

Beautiful puppy! 💜

I wished I had skills to work on my vehicle this would save me tons of 💵 nice detailed video Great information

Great video 👍👍.. just got my 2005 suburban transmission removed following these steps. Thank you much appreciated.

@dudewecanfixit

2 жыл бұрын

Stoked to hear you were able to benefit from the video!

This is great! I learned a lot

Excellent video, I’ve been thinking of doing this and this is one of the only videos where this task is done on the floor. The 4K video also helps ton, don’t know how we survived the days of analog video. Also great attention to detail with steps others gloss over.

@dudewecanfixit

2 жыл бұрын

Thank you so much, you have no idea how much it means to me to hear this kind of feedback instead of the usual “you forgot something or could do this better”. Much appreciate it, please subscribe to my channel!

@spencemcmorris7686

2 жыл бұрын

Thanks for the video brother!preparing to do mine soon

This is one extremely nice and detailed how to video. By far the best video in my search for knowledge and tips on how to remove my 2004 Escalade tranny to replace the rear main seal. Thank you sooo much for this. You earned another prescriber btw. May God bless you.

@dudewecanfixit

2 жыл бұрын

Thanks so much, this is how we grow!

This is possibly the greatest video explaining how to do work on your truck your self

@dudewecanfixit

2 жыл бұрын

Thanks for the nice comment! Please subscribe to our channel to help us grow and for future content

Thank you for such an informative video! Will be looking out for the next ☺

@dudewecanfixit

3 жыл бұрын

Thank you for the nice comment!

Can’t wait to watch more videos.

Your the only one i seen so far that helped me get through mines to understand it

@dudewecanfixit

3 ай бұрын

I'm glad we were able to help!

Great how to video brother I’m not pulling my trans but just replacing flex plate really helped me on moving it back a little to get to the flex 👍

@dudewecanfixit

2 жыл бұрын

Glad it helped!

I'll definitely be looking for your videos to fix something 💕 cutest dog🌹

Tools used in this video DEWALT Socket Set, 3/8-Inch Drive: amzn.to/3Qk1Fik DEWALT Ratcheting Wrench: amzn.to/3mIuh78 Kobalt 20-Piece Standard: amzn.to/3HkwcbC HUSKY, HD00120, 3-Ton: amzn.to/3mHAArJ Kobalt KCW 5024B-03 24-Volt : amzn.to/3HiCB7l 31118 Oil Drain Pan: amzn.to/3aYKB1f TEKTON 3/8 Inch Drive x 13 mm Universal Joint Socket: amzn.to/3xstvQF GEARWRENCH 4 Pc. 3/8" Drive Wobble Extension Set: amzn.to/3mIjBFB Impact Adapter and Reducer Set, 8Pcs Heavy Duty Impact drill and Drive Adapter:amzn.to/3mIxMdR Craftsman 4 Piece 1/2 Inch Drive Socket Extension Set: amzn.to/39iWv5p Ironclad General Utility Work Gloves GUG: amzn.to/3MNxPQi TEKTON 3/8 Inch Drive x 15 mm Universal Joint Socket: amzn.to/3Hmrdap 0:00​ - Intro 0:47 - Disconnect Battery 1:08 - Lift Vehicle 2:05​ - Remove Starter 3:00 - Heat Shield 3:18​ - Drain Fluid 3:44 - Remove Driveshaft 4:41 - Trans Mount & Support Bar 6:51 - Disconnect O2 Sensors 7:39 - Remove Exhaust 8:33 - Electrical Connectors 8:54 - Oil Cooler Lines 9:51 - Shift Linkage 10:14 - Neutral Safety Switch 10:47 - Torque Converter Bolts 11:46 - Bell Housing Bolts 14:10 - Remove Transmission 14:37 - Outro

@richardneal4691

3 жыл бұрын

F

@Unoriginal42069

2 жыл бұрын

Well done I watched it recently and now have completed removal, tear down, rebuild, and reinstall!!! Man excellent videos. My question is what happens if my transmission vent tube is broken and not in service

@bertchristopher6729

2 жыл бұрын

@@Unoriginal42069 how hard was the rebuild fixing to start on the removal tomorrow and rebuilding

@tannerwilliams3074

2 жыл бұрын

I really need help with something I’m in the middle of putting mine back in and I have 2 connectors and I don’t see them in your video I have no idea where they go

@iamtheonee2728

2 жыл бұрын

Bro, You went above and beyond on this video. The details are on point. You are a life saver. Thank you 🙏

P.S. I really think it’s cool you actually responded to my comment and took the time out of your busy schedule to do so! Very informative! Very quick but good attention to detail! Video is straight to the point! Thank you again brother! P.S.S. Shout out to your assistant!

@dudewecanfixit

9 ай бұрын

Thanks! I try to stay on top of the comments. I do have the best assistant!

Looks so easy. Love the dog ❤

You guys made an amazing video!! Great edits and very informative with steps and tips

@dudewecanfixit

3 жыл бұрын

Thank you! We appreciate the positive feedback!

Just finished using this video to pull the trans out of my 05 avalanche thanks for all the good info made the process much easier

@dudewecanfixit

Жыл бұрын

I'm glad our video helped you!

Nice job! You got right to the point and explained what you were doing.

So Neat. Easy To Do, Great, Subscribed. Great How to Do Tutorial. Will Really Help Me When Needed. Thank You.

@dudewecanfixit

3 жыл бұрын

I appreciate the subscribe! It helps us keep producing content. Plenty more videos to come, please share and enjoy!

Subscribed!

Started watching your video, I have 05 Tahoe need to pull transmission next few days, following your video before I start! Thanks, very Pro!

@dudewecanfixit

2 жыл бұрын

Thanks, I appreciate the comment!

This is great! Love the dog also!

My husband will like your KZread Channel,He is always working on something. Thank you #WreathsByDesign for letting everyone know about this channel.

Absolutely everything you need to know for rebuilding a transmission!

looking at replacing the rear main seal and plate/gasket on my dad's 02 Z71 and this makes me feel a little better. I've been turning wrenches for over 30 years but sometimes its nice to have a step by step on these things. my dread is the fact that I have a transfer case to deal with as well since its a 4wd

Thank you for such a simple and clear "how to"

@dudewecanfixit

2 жыл бұрын

You’re welcome, that’s our goal

Good job

@dudewecanfixit

3 жыл бұрын

Thank you!

nobody gonna talk about the GMC caps on a chevy?

@dudewecanfixit

3 жыл бұрын

Lol, I'm glad you found that little easter egg. Those rims are off a GMC truck.

@CarpenterChris

Ай бұрын

That is a gmc bruh

@CarpenterChris

Ай бұрын

It's all the same Yukon Tahoe suburban

@CarpenterChris

Ай бұрын

Ne ways bout to pull my Tahoe trans ....I've watched your vid like 10 times ....I'll let you know how it works out...ps....didn't watch anyone else's vids

You are a hell of a guy. This video covers everything. I hope you’re making a killing training people how to do these things. You have made it possible for me to put money, that would be going to a mechanic, to my toddler’s instead. My hat is off to you sir. Liked and subscribed.

@dudewecanfixit

2 жыл бұрын

I'm glad this was useful to you! So far we are trying to get my producer's salary covered. I need more subscribers and views before I start pulling anything off of this.

He's amazing at what he can do

Damn Good video!!!!!!!!!!

@dudewecanfixit

3 жыл бұрын

We appreciate the feed back and support! Make sure you drop and like and sub! 😁

I love your dog! I know you can fix it. My husband "maybe" could fix it. I would pass you tools and feed the fur-baby.

Such a fantastic series! 🎉

@dudewecanfixit

3 жыл бұрын

Thank you!

This is so great~Love this!

i have a extra bolt 😅

@edgardorivera3565

Ай бұрын

Finna be me🤣

blue heeler cross a hard working cattle dog ,loyal and a best mate to have a beer with after a hard days work also a chick magnet

@dudewecanfixit

3 жыл бұрын

You are correct on all accounts! Definitely a chick magnet, lol.

I just wanted to stop back by and say I really thank you dude! We fixed it today.i am in a tight situation bought an as is vehicle that the transmission just went out of warranty in January and only had 27,000 of 50000 warrantied miles on the clock. Well I won't say names but this company wanted 900 just to look at it I watched your video for removal and install and guess what 10 hours later(only had hand tools) and 280$ and a case of beer to pay my helper later my family is back in a safe reliable vehicle that has a brand new refurbished 4l60e in it thanks to these guys. . Come on back now yeeyee

@dudewecanfixit

Жыл бұрын

That's amazing!! Your definitely made my day!

@codijacobs2896

Жыл бұрын

@@dudewecanfixit anytime pal who knows maybe one day we could work on something together

Halfway through I HAD to subscribe. This was great explanation and gives me confidence. Thank you.

@dudewecanfixit

Жыл бұрын

Thank you so much! I'm glad this video helped and I hope we have more content that helps you in the future.

@dudewecanfixit

Жыл бұрын

Are there any specific repair videos that you think we should make?

Awesome video! Keep them coming!

@dudewecanfixit

3 жыл бұрын

Thanks for the nice comment!

One of the best if not the best video on how to remove the tranny. Editing on point. Great job. this helped on on several things.

@dudewecanfixit

2 жыл бұрын

Thanks! We appreciate the feedback!! Please subscribe and share our channel

Glad I found this. I can show it to hubby

Simple and easy follow video. Gave it a thumbs up!

The best video and explained!! Thanks guy’s!

@dudewecanfixit

Жыл бұрын

Thank YOU for watching! Consider subscribing 😁

I love your furbaby. Thank you for the awesome video

Great video! Nice explanation of the process and the bolt locations.

@dudewecanfixit

2 жыл бұрын

Glad you enjoyed it!

This is great material! Well done dude! I will need to come back to this a few times while removing mine.

@dudewecanfixit

9 ай бұрын

Go for it!

Thank you so much I can't afford a transmission mechanic at the moment so I'm doing it all myself.

@dudewecanfixit

Жыл бұрын

Mechanics are expensive, but you can do it for much cheaper and still do a good quality job. Just take your time

One of the best videos I've seen

@dudewecanfixit

9 ай бұрын

Thank you sir much! We Greatly appreciate the support

After watching this tutorial, I believe I can rebuild my transmission on my GMC Envoy. Thank you 😊

@gearshifterg9756

2 жыл бұрын

That's something I would love to watch, somebody rebuilding a transmission after watching a you tube video. Priceless.

@dudewecanfixit

2 жыл бұрын

Many successful testimonies this far!

@dudewecanfixit

2 жыл бұрын

You can definitely do it, just take your time and have patience

I love the Pup 🐶